| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include <linux/types.h> |
| 3 |
#include <linux/i8253.h> |
| 4 |
#include <linux/interrupt.h> |
| 5 |
#include <linux/irq.h> |
| 6 |
#include <linux/smp.h> |
| 7 |
#include <linux/time.h> |
| 8 |
#include <linux/clockchips.h> |
| 9 |
|
| 10 |
#include <asm/sni.h> |
| 11 |
#include <asm/time.h> |
| 12 |
|
| 13 |
#define SNI_CLOCK_TICK_RATE 3686400 |
| 14 |
#define SNI_COUNTER2_DIV 64 |
| 15 |
#define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ) |
| 16 |
|
| 17 |
static int a20r_set_periodic(struct clock_event_device *evt) |
| 18 |
{ |
| 19 |
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34; |
| 20 |
wmb(); |
| 21 |
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV & 0xff; |
| 22 |
wmb(); |
| 23 |
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV >> 8; |
| 24 |
wmb(); |
| 25 |
|
| 26 |
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4; |
| 27 |
wmb(); |
| 28 |
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV & 0xff; |
| 29 |
wmb(); |
| 30 |
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8; |
| 31 |
wmb(); |
| 32 |
return 0; |
| 33 |
} |
| 34 |
|
| 35 |
static struct clock_event_device a20r_clockevent_device = { |
| 36 |
.name = "a20r-timer", |
| 37 |
.features = CLOCK_EVT_FEAT_PERIODIC, |
| 38 |
|
| 39 |
/* .mult, .shift, .max_delta_ns and .min_delta_ns left uninitialized */ |
| 40 |
|
| 41 |
.rating = 300, |
| 42 |
.irq = SNI_A20R_IRQ_TIMER, |
| 43 |
.set_state_periodic = a20r_set_periodic, |
| 44 |
}; |
| 45 |
|
| 46 |
static irqreturn_t a20r_interrupt(int irq, void *dev_id) |
| 47 |
{ |
| 48 |
struct clock_event_device *cd = dev_id; |
| 49 |
|
| 50 |
*(volatile u8 *)A20R_PT_TIM0_ACK = 0; |
| 51 |
wmb(); |
| 52 |
|
| 53 |
cd->event_handler(cd); |
| 54 |
|
| 55 |
return IRQ_HANDLED; |
| 56 |
} |
| 57 |
|
| 58 |
/* |
| 59 |
* a20r platform uses 2 counters to divide the input frequency. |
| 60 |
* Counter 2 output is connected to Counter 0 & 1 input. |
| 61 |
*/ |
| 62 |
static void __init sni_a20r_timer_setup(void) |
| 63 |
{ |
| 64 |
struct clock_event_device *cd = &a20r_clockevent_device; |
| 65 |
unsigned int cpu = smp_processor_id(); |
| 66 |
|
| 67 |
cd->cpumask = cpumask_of(cpu); |
| 68 |
clockevents_register_device(cd); |
| 69 |
if (request_irq(SNI_A20R_IRQ_TIMER, a20r_interrupt, |
| 70 |
IRQF_PERCPU | IRQF_TIMER, "a20r-timer", cd)) |
| 71 |
pr_err("Failed to register a20r-timer interrupt\n"); |
| 72 |
} |
| 73 |
|
| 74 |
#define SNI_8254_TICK_RATE 1193182UL |
| 75 |
|
| 76 |
#define SNI_8254_TCSAMP_COUNTER ((SNI_8254_TICK_RATE / HZ) + 255) |
| 77 |
|
| 78 |
static __init unsigned long dosample(void) |
| 79 |
{ |
| 80 |
u32 ct0, ct1; |
| 81 |
volatile u8 msb; |
| 82 |
|
| 83 |
/* Start the counter. */ |
| 84 |
outb_p(0x34, 0x43); |
| 85 |
outb_p(SNI_8254_TCSAMP_COUNTER & 0xff, 0x40); |
| 86 |
outb(SNI_8254_TCSAMP_COUNTER >> 8, 0x40); |
| 87 |
|
| 88 |
/* Get initial counter invariant */ |
| 89 |
ct0 = read_c0_count(); |
| 90 |
|
| 91 |
/* Latch and spin until top byte of counter0 is zero */ |
| 92 |
do { |
| 93 |
outb(0x00, 0x43); |
| 94 |
(void) inb(0x40); |
| 95 |
msb = inb(0x40); |
| 96 |
ct1 = read_c0_count(); |
| 97 |
} while (msb); |
| 98 |
|
| 99 |
/* Stop the counter. */ |
| 100 |
outb(0x38, 0x43); |
| 101 |
/* |
| 102 |
* Return the difference, this is how far the r4k counter increments |
| 103 |
* for every 1/HZ seconds. We round off the nearest 1 MHz of master |
| 104 |
* clock (= 1000000 / HZ / 2). |
| 105 |
*/ |
| 106 |
/*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/ |
| 107 |
return (ct1 - ct0) / (500000/HZ) * (500000/HZ); |
| 108 |
} |
| 109 |
|
| 110 |
/* |
| 111 |
* Here we need to calibrate the cycle counter to at least be close. |
| 112 |
*/ |
| 113 |
void __init plat_time_init(void) |
| 114 |
{ |
| 115 |
unsigned long r4k_ticks[3]; |
| 116 |
unsigned long r4k_tick; |
| 117 |
|
| 118 |
/* |
| 119 |
* Figure out the r4k offset, the algorithm is very simple and works in |
| 120 |
* _all_ cases as long as the 8254 counter register itself works ok (as |
| 121 |
* an interrupt driving timer it does not because of bug, this is why |
| 122 |
* we are using the onchip r4k counter/compare register to serve this |
| 123 |
* purpose, but for r4k_offset calculation it will work ok for us). |
| 124 |
* There are other very complicated ways of performing this calculation |
| 125 |
* but this one works just fine so I am not going to futz around. ;-) |
| 126 |
*/ |
| 127 |
printk(KERN_INFO "Calibrating system timer... "); |
| 128 |
dosample(); /* Prime cache. */ |
| 129 |
dosample(); /* Prime cache. */ |
| 130 |
/* Zero is NOT an option. */ |
| 131 |
do { |
| 132 |
r4k_ticks[0] = dosample(); |
| 133 |
} while (!r4k_ticks[0]); |
| 134 |
do { |
| 135 |
r4k_ticks[1] = dosample(); |
| 136 |
} while (!r4k_ticks[1]); |
| 137 |
|
| 138 |
if (r4k_ticks[0] != r4k_ticks[1]) { |
| 139 |
printk("warning: timer counts differ, retrying... "); |
| 140 |
r4k_ticks[2] = dosample(); |
| 141 |
if (r4k_ticks[2] == r4k_ticks[0] |
| 142 |
|| r4k_ticks[2] == r4k_ticks[1]) |
| 143 |
r4k_tick = r4k_ticks[2]; |
| 144 |
else { |
| 145 |
printk("disagreement, using average... "); |
| 146 |
r4k_tick = (r4k_ticks[0] + r4k_ticks[1] |
| 147 |
+ r4k_ticks[2]) / 3; |
| 148 |
} |
| 149 |
} else |
| 150 |
r4k_tick = r4k_ticks[0]; |
| 151 |
|
| 152 |
printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick, |
| 153 |
(int) (r4k_tick / (500000 / HZ)), |
| 154 |
(int) (r4k_tick % (500000 / HZ))); |
| 155 |
|
| 156 |
mips_hpt_frequency = r4k_tick * HZ; |
| 157 |
|
| 158 |
switch (sni_brd_type) { |
| 159 |
case SNI_BRD_10: |
| 160 |
case SNI_BRD_10NEW: |
| 161 |
case SNI_BRD_TOWER_OASIC: |
| 162 |
case SNI_BRD_MINITOWER: |
| 163 |
sni_a20r_timer_setup(); |
| 164 |
break; |
| 165 |
} |
| 166 |
setup_pit_timer(); |
| 167 |
} |