| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include <linux/init.h> |
| 3 |
#include <linux/pci.h> |
| 4 |
#include <linux/percpu.h> |
| 5 |
#include <linux/delay.h> |
| 6 |
#include <linux/spinlock.h> |
| 7 |
#include <linux/interrupt.h> |
| 8 |
|
| 9 |
#include <asm/hpet.h> |
| 10 |
#include <asm/time.h> |
| 11 |
|
| 12 |
#define SMBUS_CFG_BASE (loongson_sysconf.ht_control_base + 0x0300a000) |
| 13 |
#define SMBUS_PCI_REG40 0x40 |
| 14 |
#define SMBUS_PCI_REG64 0x64 |
| 15 |
#define SMBUS_PCI_REGB4 0xb4 |
| 16 |
|
| 17 |
#define HPET_MIN_CYCLES 16 |
| 18 |
#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES * 12) |
| 19 |
|
| 20 |
static DEFINE_SPINLOCK(hpet_lock); |
| 21 |
DEFINE_PER_CPU(struct clock_event_device, hpet_clockevent_device); |
| 22 |
|
| 23 |
static unsigned int smbus_read(int offset) |
| 24 |
{ |
| 25 |
return *(volatile unsigned int *)(SMBUS_CFG_BASE + offset); |
| 26 |
} |
| 27 |
|
| 28 |
static void smbus_write(int offset, int data) |
| 29 |
{ |
| 30 |
*(volatile unsigned int *)(SMBUS_CFG_BASE + offset) = data; |
| 31 |
} |
| 32 |
|
| 33 |
static void smbus_enable(int offset, int bit) |
| 34 |
{ |
| 35 |
unsigned int cfg = smbus_read(offset); |
| 36 |
|
| 37 |
cfg |= bit; |
| 38 |
smbus_write(offset, cfg); |
| 39 |
} |
| 40 |
|
| 41 |
static int hpet_read(int offset) |
| 42 |
{ |
| 43 |
return *(volatile unsigned int *)(HPET_MMIO_ADDR + offset); |
| 44 |
} |
| 45 |
|
| 46 |
static void hpet_write(int offset, int data) |
| 47 |
{ |
| 48 |
*(volatile unsigned int *)(HPET_MMIO_ADDR + offset) = data; |
| 49 |
} |
| 50 |
|
| 51 |
static void hpet_start_counter(void) |
| 52 |
{ |
| 53 |
unsigned int cfg = hpet_read(HPET_CFG); |
| 54 |
|
| 55 |
cfg |= HPET_CFG_ENABLE; |
| 56 |
hpet_write(HPET_CFG, cfg); |
| 57 |
} |
| 58 |
|
| 59 |
static void hpet_stop_counter(void) |
| 60 |
{ |
| 61 |
unsigned int cfg = hpet_read(HPET_CFG); |
| 62 |
|
| 63 |
cfg &= ~HPET_CFG_ENABLE; |
| 64 |
hpet_write(HPET_CFG, cfg); |
| 65 |
} |
| 66 |
|
| 67 |
static void hpet_reset_counter(void) |
| 68 |
{ |
| 69 |
hpet_write(HPET_COUNTER, 0); |
| 70 |
hpet_write(HPET_COUNTER + 4, 0); |
| 71 |
} |
| 72 |
|
| 73 |
static void hpet_restart_counter(void) |
| 74 |
{ |
| 75 |
hpet_stop_counter(); |
| 76 |
hpet_reset_counter(); |
| 77 |
hpet_start_counter(); |
| 78 |
} |
| 79 |
|
| 80 |
static void hpet_enable_legacy_int(void) |
| 81 |
{ |
| 82 |
/* Do nothing on Loongson-3 */ |
| 83 |
} |
| 84 |
|
| 85 |
static int hpet_set_state_periodic(struct clock_event_device *evt) |
| 86 |
{ |
| 87 |
int cfg; |
| 88 |
|
| 89 |
spin_lock(&hpet_lock); |
| 90 |
|
| 91 |
pr_info("set clock event to periodic mode!\n"); |
| 92 |
/* stop counter */ |
| 93 |
hpet_stop_counter(); |
| 94 |
|
| 95 |
/* enables the timer0 to generate a periodic interrupt */ |
| 96 |
cfg = hpet_read(HPET_T0_CFG); |
| 97 |
cfg &= ~HPET_TN_LEVEL; |
| 98 |
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | |
| 99 |
HPET_TN_32BIT; |
| 100 |
hpet_write(HPET_T0_CFG, cfg); |
| 101 |
|
| 102 |
/* set the comparator */ |
| 103 |
hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL); |
| 104 |
udelay(1); |
| 105 |
hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL); |
| 106 |
|
| 107 |
/* start counter */ |
| 108 |
hpet_start_counter(); |
| 109 |
|
| 110 |
spin_unlock(&hpet_lock); |
| 111 |
return 0; |
| 112 |
} |
| 113 |
|
| 114 |
static int hpet_set_state_shutdown(struct clock_event_device *evt) |
| 115 |
{ |
| 116 |
int cfg; |
| 117 |
|
| 118 |
spin_lock(&hpet_lock); |
| 119 |
|
| 120 |
cfg = hpet_read(HPET_T0_CFG); |
| 121 |
cfg &= ~HPET_TN_ENABLE; |
| 122 |
hpet_write(HPET_T0_CFG, cfg); |
| 123 |
|
| 124 |
spin_unlock(&hpet_lock); |
| 125 |
return 0; |
| 126 |
} |
| 127 |
|
| 128 |
static int hpet_set_state_oneshot(struct clock_event_device *evt) |
| 129 |
{ |
| 130 |
int cfg; |
| 131 |
|
| 132 |
spin_lock(&hpet_lock); |
| 133 |
|
| 134 |
pr_info("set clock event to one shot mode!\n"); |
| 135 |
cfg = hpet_read(HPET_T0_CFG); |
| 136 |
/* |
| 137 |
* set timer0 type |
| 138 |
* 1 : periodic interrupt |
| 139 |
* 0 : non-periodic(oneshot) interrupt |
| 140 |
*/ |
| 141 |
cfg &= ~HPET_TN_PERIODIC; |
| 142 |
cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; |
| 143 |
hpet_write(HPET_T0_CFG, cfg); |
| 144 |
|
| 145 |
spin_unlock(&hpet_lock); |
| 146 |
return 0; |
| 147 |
} |
| 148 |
|
| 149 |
static int hpet_tick_resume(struct clock_event_device *evt) |
| 150 |
{ |
| 151 |
spin_lock(&hpet_lock); |
| 152 |
hpet_enable_legacy_int(); |
| 153 |
spin_unlock(&hpet_lock); |
| 154 |
|
| 155 |
return 0; |
| 156 |
} |
| 157 |
|
| 158 |
static int hpet_next_event(unsigned long delta, |
| 159 |
struct clock_event_device *evt) |
| 160 |
{ |
| 161 |
u32 cnt; |
| 162 |
s32 res; |
| 163 |
|
| 164 |
cnt = hpet_read(HPET_COUNTER); |
| 165 |
cnt += (u32) delta; |
| 166 |
hpet_write(HPET_T0_CMP, cnt); |
| 167 |
|
| 168 |
res = (s32)(cnt - hpet_read(HPET_COUNTER)); |
| 169 |
|
| 170 |
return res < HPET_MIN_CYCLES ? -ETIME : 0; |
| 171 |
} |
| 172 |
|
| 173 |
static irqreturn_t hpet_irq_handler(int irq, void *data) |
| 174 |
{ |
| 175 |
int is_irq; |
| 176 |
struct clock_event_device *cd; |
| 177 |
unsigned int cpu = smp_processor_id(); |
| 178 |
|
| 179 |
is_irq = hpet_read(HPET_STATUS); |
| 180 |
if (is_irq & HPET_T0_IRS) { |
| 181 |
/* clear the TIMER0 irq status register */ |
| 182 |
hpet_write(HPET_STATUS, HPET_T0_IRS); |
| 183 |
cd = &per_cpu(hpet_clockevent_device, cpu); |
| 184 |
cd->event_handler(cd); |
| 185 |
return IRQ_HANDLED; |
| 186 |
} |
| 187 |
return IRQ_NONE; |
| 188 |
} |
| 189 |
|
| 190 |
/* |
| 191 |
* hpet address assignation and irq setting should be done in bios. |
| 192 |
* but pmon don't do this, we just setup here directly. |
| 193 |
* The operation under is normal. unfortunately, hpet_setup process |
| 194 |
* is before pci initialize. |
| 195 |
* |
| 196 |
* { |
| 197 |
* struct pci_dev *pdev; |
| 198 |
* |
| 199 |
* pdev = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL); |
| 200 |
* pci_write_config_word(pdev, SMBUS_PCI_REGB4, HPET_ADDR); |
| 201 |
* |
| 202 |
* ... |
| 203 |
* } |
| 204 |
*/ |
| 205 |
static void hpet_setup(void) |
| 206 |
{ |
| 207 |
/* set hpet base address */ |
| 208 |
smbus_write(SMBUS_PCI_REGB4, HPET_ADDR); |
| 209 |
|
| 210 |
/* enable decoding of access to HPET MMIO*/ |
| 211 |
smbus_enable(SMBUS_PCI_REG40, (1 << 28)); |
| 212 |
|
| 213 |
/* HPET irq enable */ |
| 214 |
smbus_enable(SMBUS_PCI_REG64, (1 << 10)); |
| 215 |
|
| 216 |
hpet_enable_legacy_int(); |
| 217 |
} |
| 218 |
|
| 219 |
void __init setup_hpet_timer(void) |
| 220 |
{ |
| 221 |
unsigned long flags = IRQF_NOBALANCING | IRQF_TIMER; |
| 222 |
unsigned int cpu = smp_processor_id(); |
| 223 |
struct clock_event_device *cd; |
| 224 |
|
| 225 |
hpet_setup(); |
| 226 |
|
| 227 |
cd = &per_cpu(hpet_clockevent_device, cpu); |
| 228 |
cd->name = "hpet"; |
| 229 |
cd->rating = 100; |
| 230 |
cd->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; |
| 231 |
cd->set_state_shutdown = hpet_set_state_shutdown; |
| 232 |
cd->set_state_periodic = hpet_set_state_periodic; |
| 233 |
cd->set_state_oneshot = hpet_set_state_oneshot; |
| 234 |
cd->tick_resume = hpet_tick_resume; |
| 235 |
cd->set_next_event = hpet_next_event; |
| 236 |
cd->irq = HPET_T0_IRQ; |
| 237 |
cd->cpumask = cpumask_of(cpu); |
| 238 |
clockevent_set_clock(cd, HPET_FREQ); |
| 239 |
cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); |
| 240 |
cd->max_delta_ticks = 0x7fffffff; |
| 241 |
cd->min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA, cd); |
| 242 |
cd->min_delta_ticks = HPET_MIN_PROG_DELTA; |
| 243 |
|
| 244 |
clockevents_register_device(cd); |
| 245 |
if (request_irq(HPET_T0_IRQ, hpet_irq_handler, flags, "hpet", NULL)) |
| 246 |
pr_err("Failed to request irq %d (hpet)\n", HPET_T0_IRQ); |
| 247 |
pr_info("hpet clock event device register\n"); |
| 248 |
} |
| 249 |
|
| 250 |
static u64 hpet_read_counter(struct clocksource *cs) |
| 251 |
{ |
| 252 |
return (u64)hpet_read(HPET_COUNTER); |
| 253 |
} |
| 254 |
|
| 255 |
static void hpet_suspend(struct clocksource *cs) |
| 256 |
{ |
| 257 |
} |
| 258 |
|
| 259 |
static void hpet_resume(struct clocksource *cs) |
| 260 |
{ |
| 261 |
hpet_setup(); |
| 262 |
hpet_restart_counter(); |
| 263 |
} |
| 264 |
|
| 265 |
static struct clocksource csrc_hpet = { |
| 266 |
.name = "hpet", |
| 267 |
/* mips clocksource rating is less than 300, so hpet is better. */ |
| 268 |
.rating = 300, |
| 269 |
.read = hpet_read_counter, |
| 270 |
.mask = CLOCKSOURCE_MASK(32), |
| 271 |
/* oneshot mode work normal with this flag */ |
| 272 |
.flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| 273 |
.suspend = hpet_suspend, |
| 274 |
.resume = hpet_resume, |
| 275 |
.mult = 0, |
| 276 |
.shift = 10, |
| 277 |
}; |
| 278 |
|
| 279 |
int __init init_hpet_clocksource(void) |
| 280 |
{ |
| 281 |
csrc_hpet.mult = clocksource_hz2mult(HPET_FREQ, csrc_hpet.shift); |
| 282 |
return clocksource_register_hz(&csrc_hpet, HPET_FREQ); |
| 283 |
} |
| 284 |
|
| 285 |
arch_initcall(init_hpet_clocksource); |