| 1 |
/***********************license start*************** |
| 2 |
* Author: Cavium Networks |
| 3 |
* |
| 4 |
* Contact: [email protected] |
| 5 |
* This file is part of the OCTEON SDK |
| 6 |
* |
| 7 |
* Copyright (C) 2003-2018 Cavium, Inc. |
| 8 |
* |
| 9 |
* This file is free software; you can redistribute it and/or modify |
| 10 |
* it under the terms of the GNU General Public License, Version 2, as |
| 11 |
* published by the Free Software Foundation. |
| 12 |
* |
| 13 |
* This file is distributed in the hope that it will be useful, but |
| 14 |
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty |
| 15 |
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or |
| 16 |
* NONINFRINGEMENT. See the GNU General Public License for more |
| 17 |
* details. |
| 18 |
* |
| 19 |
* You should have received a copy of the GNU General Public License |
| 20 |
* along with this file; if not, write to the Free Software |
| 21 |
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| 22 |
* or visit http://www.gnu.org/licenses/. |
| 23 |
* |
| 24 |
* This file may also be available under a different license from Cavium. |
| 25 |
* Contact Cavium Networks for more information |
| 26 |
***********************license end**************************************/ |
| 27 |
|
| 28 |
/* |
| 29 |
* Functions for XAUI initialization, configuration, |
| 30 |
* and monitoring. |
| 31 |
* |
| 32 |
*/ |
| 33 |
|
| 34 |
#include <asm/octeon/octeon.h> |
| 35 |
|
| 36 |
#include <asm/octeon/cvmx-config.h> |
| 37 |
|
| 38 |
#include <asm/octeon/cvmx-helper.h> |
| 39 |
|
| 40 |
#include <asm/octeon/cvmx-pko-defs.h> |
| 41 |
#include <asm/octeon/cvmx-gmxx-defs.h> |
| 42 |
#include <asm/octeon/cvmx-pcsx-defs.h> |
| 43 |
#include <asm/octeon/cvmx-pcsxx-defs.h> |
| 44 |
|
| 45 |
int __cvmx_helper_xaui_enumerate(int interface) |
| 46 |
{ |
| 47 |
union cvmx_gmxx_hg2_control gmx_hg2_control; |
| 48 |
|
| 49 |
/* If HiGig2 is enabled return 16 ports, otherwise return 1 port */ |
| 50 |
gmx_hg2_control.u64 = cvmx_read_csr(CVMX_GMXX_HG2_CONTROL(interface)); |
| 51 |
if (gmx_hg2_control.s.hg2tx_en) |
| 52 |
return 16; |
| 53 |
else |
| 54 |
return 1; |
| 55 |
} |
| 56 |
|
| 57 |
/* |
| 58 |
* Probe a XAUI interface and determine the number of ports |
| 59 |
* connected to it. The XAUI interface should still be down |
| 60 |
* after this call. |
| 61 |
* |
| 62 |
* @interface: Interface to probe |
| 63 |
* |
| 64 |
* Returns Number of ports on the interface. Zero to disable. |
| 65 |
*/ |
| 66 |
int __cvmx_helper_xaui_probe(int interface) |
| 67 |
{ |
| 68 |
int i; |
| 69 |
union cvmx_gmxx_inf_mode mode; |
| 70 |
|
| 71 |
/* |
| 72 |
* Due to errata GMX-700 on CN56XXp1.x and CN52XXp1.x, the |
| 73 |
* interface needs to be enabled before IPD otherwise per port |
| 74 |
* backpressure may not work properly. |
| 75 |
*/ |
| 76 |
mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); |
| 77 |
mode.s.en = 1; |
| 78 |
cvmx_write_csr(CVMX_GMXX_INF_MODE(interface), mode.u64); |
| 79 |
|
| 80 |
__cvmx_helper_setup_gmx(interface, 1); |
| 81 |
|
| 82 |
/* |
| 83 |
* Setup PKO to support 16 ports for HiGig2 virtual |
| 84 |
* ports. We're pointing all of the PKO packet ports for this |
| 85 |
* interface to the XAUI. This allows us to use HiGig2 |
| 86 |
* backpressure per port. |
| 87 |
*/ |
| 88 |
for (i = 0; i < 16; i++) { |
| 89 |
union cvmx_pko_mem_port_ptrs pko_mem_port_ptrs; |
| 90 |
pko_mem_port_ptrs.u64 = 0; |
| 91 |
/* |
| 92 |
* We set each PKO port to have equal priority in a |
| 93 |
* round robin fashion. |
| 94 |
*/ |
| 95 |
pko_mem_port_ptrs.s.static_p = 0; |
| 96 |
pko_mem_port_ptrs.s.qos_mask = 0xff; |
| 97 |
/* All PKO ports map to the same XAUI hardware port */ |
| 98 |
pko_mem_port_ptrs.s.eid = interface * 4; |
| 99 |
pko_mem_port_ptrs.s.pid = interface * 16 + i; |
| 100 |
cvmx_write_csr(CVMX_PKO_MEM_PORT_PTRS, pko_mem_port_ptrs.u64); |
| 101 |
} |
| 102 |
return __cvmx_helper_xaui_enumerate(interface); |
| 103 |
} |
| 104 |
|
| 105 |
/* |
| 106 |
* Bringup and enable a XAUI interface. After this call packet |
| 107 |
* I/O should be fully functional. This is called with IPD |
| 108 |
* enabled but PKO disabled. |
| 109 |
* |
| 110 |
* @interface: Interface to bring up |
| 111 |
* |
| 112 |
* Returns Zero on success, negative on failure |
| 113 |
*/ |
| 114 |
int __cvmx_helper_xaui_enable(int interface) |
| 115 |
{ |
| 116 |
union cvmx_gmxx_prtx_cfg gmx_cfg; |
| 117 |
union cvmx_pcsxx_control1_reg xauiCtl; |
| 118 |
union cvmx_pcsxx_misc_ctl_reg xauiMiscCtl; |
| 119 |
union cvmx_gmxx_tx_xaui_ctl gmxXauiTxCtl; |
| 120 |
union cvmx_gmxx_rxx_int_en gmx_rx_int_en; |
| 121 |
union cvmx_gmxx_tx_int_en gmx_tx_int_en; |
| 122 |
union cvmx_pcsxx_int_en_reg pcsx_int_en_reg; |
| 123 |
|
| 124 |
/* Setup PKND */ |
| 125 |
if (octeon_has_feature(OCTEON_FEATURE_PKND)) { |
| 126 |
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface)); |
| 127 |
gmx_cfg.s.pknd = cvmx_helper_get_ipd_port(interface, 0); |
| 128 |
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); |
| 129 |
} |
| 130 |
|
| 131 |
/* (1) Interface has already been enabled. */ |
| 132 |
|
| 133 |
/* (2) Disable GMX. */ |
| 134 |
xauiMiscCtl.u64 = cvmx_read_csr(CVMX_PCSXX_MISC_CTL_REG(interface)); |
| 135 |
xauiMiscCtl.s.gmxeno = 1; |
| 136 |
cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64); |
| 137 |
|
| 138 |
/* (3) Disable GMX and PCSX interrupts. */ |
| 139 |
gmx_rx_int_en.u64 = cvmx_read_csr(CVMX_GMXX_RXX_INT_EN(0, interface)); |
| 140 |
cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), 0x0); |
| 141 |
gmx_tx_int_en.u64 = cvmx_read_csr(CVMX_GMXX_TX_INT_EN(interface)); |
| 142 |
cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), 0x0); |
| 143 |
pcsx_int_en_reg.u64 = cvmx_read_csr(CVMX_PCSXX_INT_EN_REG(interface)); |
| 144 |
cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), 0x0); |
| 145 |
|
| 146 |
/* (4) Bring up the PCSX and GMX reconciliation layer. */ |
| 147 |
/* (4)a Set polarity and lane swapping. */ |
| 148 |
/* (4)b */ |
| 149 |
gmxXauiTxCtl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface)); |
| 150 |
/* Enable better IFG packing and improves performance */ |
| 151 |
gmxXauiTxCtl.s.dic_en = 1; |
| 152 |
gmxXauiTxCtl.s.uni_en = 0; |
| 153 |
cvmx_write_csr(CVMX_GMXX_TX_XAUI_CTL(interface), gmxXauiTxCtl.u64); |
| 154 |
|
| 155 |
/* (4)c Aply reset sequence */ |
| 156 |
xauiCtl.u64 = cvmx_read_csr(CVMX_PCSXX_CONTROL1_REG(interface)); |
| 157 |
xauiCtl.s.lo_pwr = 0; |
| 158 |
|
| 159 |
/* Issuing a reset here seems to hang some CN66XX/CN68XX chips. */ |
| 160 |
if (!OCTEON_IS_MODEL(OCTEON_CN66XX) && |
| 161 |
!OCTEON_IS_MODEL(OCTEON_CN68XX_PASS1_X) && |
| 162 |
!OCTEON_IS_MODEL(OCTEON_CN68XX_PASS2_X)) |
| 163 |
xauiCtl.s.reset = 1; |
| 164 |
|
| 165 |
cvmx_write_csr(CVMX_PCSXX_CONTROL1_REG(interface), xauiCtl.u64); |
| 166 |
|
| 167 |
/* Wait for PCS to come out of reset */ |
| 168 |
if (CVMX_WAIT_FOR_FIELD64 |
| 169 |
(CVMX_PCSXX_CONTROL1_REG(interface), union cvmx_pcsxx_control1_reg, |
| 170 |
reset, ==, 0, 10000)) |
| 171 |
return -1; |
| 172 |
/* Wait for PCS to be aligned */ |
| 173 |
if (CVMX_WAIT_FOR_FIELD64 |
| 174 |
(CVMX_PCSXX_10GBX_STATUS_REG(interface), |
| 175 |
union cvmx_pcsxx_10gbx_status_reg, alignd, ==, 1, 10000)) |
| 176 |
return -1; |
| 177 |
/* Wait for RX to be ready */ |
| 178 |
if (CVMX_WAIT_FOR_FIELD64 |
| 179 |
(CVMX_GMXX_RX_XAUI_CTL(interface), union cvmx_gmxx_rx_xaui_ctl, |
| 180 |
status, ==, 0, 10000)) |
| 181 |
return -1; |
| 182 |
|
| 183 |
/* (6) Configure GMX */ |
| 184 |
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface)); |
| 185 |
gmx_cfg.s.en = 0; |
| 186 |
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); |
| 187 |
|
| 188 |
/* Wait for GMX RX to be idle */ |
| 189 |
if (CVMX_WAIT_FOR_FIELD64 |
| 190 |
(CVMX_GMXX_PRTX_CFG(0, interface), union cvmx_gmxx_prtx_cfg, |
| 191 |
rx_idle, ==, 1, 10000)) |
| 192 |
return -1; |
| 193 |
/* Wait for GMX TX to be idle */ |
| 194 |
if (CVMX_WAIT_FOR_FIELD64 |
| 195 |
(CVMX_GMXX_PRTX_CFG(0, interface), union cvmx_gmxx_prtx_cfg, |
| 196 |
tx_idle, ==, 1, 10000)) |
| 197 |
return -1; |
| 198 |
|
| 199 |
/* GMX configure */ |
| 200 |
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface)); |
| 201 |
gmx_cfg.s.speed = 1; |
| 202 |
gmx_cfg.s.speed_msb = 0; |
| 203 |
gmx_cfg.s.slottime = 1; |
| 204 |
cvmx_write_csr(CVMX_GMXX_TX_PRTS(interface), 1); |
| 205 |
cvmx_write_csr(CVMX_GMXX_TXX_SLOT(0, interface), 512); |
| 206 |
cvmx_write_csr(CVMX_GMXX_TXX_BURST(0, interface), 8192); |
| 207 |
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); |
| 208 |
|
| 209 |
/* (7) Clear out any error state */ |
| 210 |
cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(0, interface), |
| 211 |
cvmx_read_csr(CVMX_GMXX_RXX_INT_REG(0, interface))); |
| 212 |
cvmx_write_csr(CVMX_GMXX_TX_INT_REG(interface), |
| 213 |
cvmx_read_csr(CVMX_GMXX_TX_INT_REG(interface))); |
| 214 |
cvmx_write_csr(CVMX_PCSXX_INT_REG(interface), |
| 215 |
cvmx_read_csr(CVMX_PCSXX_INT_REG(interface))); |
| 216 |
|
| 217 |
/* Wait for receive link */ |
| 218 |
if (CVMX_WAIT_FOR_FIELD64 |
| 219 |
(CVMX_PCSXX_STATUS1_REG(interface), union cvmx_pcsxx_status1_reg, |
| 220 |
rcv_lnk, ==, 1, 10000)) |
| 221 |
return -1; |
| 222 |
if (CVMX_WAIT_FOR_FIELD64 |
| 223 |
(CVMX_PCSXX_STATUS2_REG(interface), union cvmx_pcsxx_status2_reg, |
| 224 |
xmtflt, ==, 0, 10000)) |
| 225 |
return -1; |
| 226 |
if (CVMX_WAIT_FOR_FIELD64 |
| 227 |
(CVMX_PCSXX_STATUS2_REG(interface), union cvmx_pcsxx_status2_reg, |
| 228 |
rcvflt, ==, 0, 10000)) |
| 229 |
return -1; |
| 230 |
|
| 231 |
cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), gmx_rx_int_en.u64); |
| 232 |
cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), gmx_tx_int_en.u64); |
| 233 |
cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), pcsx_int_en_reg.u64); |
| 234 |
|
| 235 |
/* (8) Enable packet reception */ |
| 236 |
xauiMiscCtl.s.gmxeno = 0; |
| 237 |
cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64); |
| 238 |
|
| 239 |
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface)); |
| 240 |
gmx_cfg.s.en = 1; |
| 241 |
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); |
| 242 |
|
| 243 |
__cvmx_interrupt_pcsx_intx_en_reg_enable(0, interface); |
| 244 |
__cvmx_interrupt_pcsx_intx_en_reg_enable(1, interface); |
| 245 |
__cvmx_interrupt_pcsx_intx_en_reg_enable(2, interface); |
| 246 |
__cvmx_interrupt_pcsx_intx_en_reg_enable(3, interface); |
| 247 |
__cvmx_interrupt_pcsxx_int_en_reg_enable(interface); |
| 248 |
__cvmx_interrupt_gmxx_enable(interface); |
| 249 |
|
| 250 |
return 0; |
| 251 |
} |
| 252 |
|
| 253 |
/* |
| 254 |
* Return the link state of an IPD/PKO port as returned by |
| 255 |
* auto negotiation. The result of this function may not match |
| 256 |
* Octeon's link config if auto negotiation has changed since |
| 257 |
* the last call to cvmx_helper_link_set(). |
| 258 |
* |
| 259 |
* @ipd_port: IPD/PKO port to query |
| 260 |
* |
| 261 |
* Returns Link state |
| 262 |
*/ |
| 263 |
union cvmx_helper_link_info __cvmx_helper_xaui_link_get(int ipd_port) |
| 264 |
{ |
| 265 |
int interface = cvmx_helper_get_interface_num(ipd_port); |
| 266 |
union cvmx_gmxx_tx_xaui_ctl gmxx_tx_xaui_ctl; |
| 267 |
union cvmx_gmxx_rx_xaui_ctl gmxx_rx_xaui_ctl; |
| 268 |
union cvmx_pcsxx_status1_reg pcsxx_status1_reg; |
| 269 |
union cvmx_helper_link_info result; |
| 270 |
|
| 271 |
gmxx_tx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface)); |
| 272 |
gmxx_rx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RX_XAUI_CTL(interface)); |
| 273 |
pcsxx_status1_reg.u64 = |
| 274 |
cvmx_read_csr(CVMX_PCSXX_STATUS1_REG(interface)); |
| 275 |
result.u64 = 0; |
| 276 |
|
| 277 |
/* Only return a link if both RX and TX are happy */ |
| 278 |
if ((gmxx_tx_xaui_ctl.s.ls == 0) && (gmxx_rx_xaui_ctl.s.status == 0) && |
| 279 |
(pcsxx_status1_reg.s.rcv_lnk == 1)) { |
| 280 |
result.s.link_up = 1; |
| 281 |
result.s.full_duplex = 1; |
| 282 |
result.s.speed = 10000; |
| 283 |
} else { |
| 284 |
/* Disable GMX and PCSX interrupts. */ |
| 285 |
cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), 0x0); |
| 286 |
cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), 0x0); |
| 287 |
cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), 0x0); |
| 288 |
} |
| 289 |
return result; |
| 290 |
} |
| 291 |
|
| 292 |
/* |
| 293 |
* Configure an IPD/PKO port for the specified link state. This |
| 294 |
* function does not influence auto negotiation at the PHY level. |
| 295 |
* The passed link state must always match the link state returned |
| 296 |
* by cvmx_helper_link_get(). |
| 297 |
* |
| 298 |
* @ipd_port: IPD/PKO port to configure |
| 299 |
* @link_info: The new link state |
| 300 |
* |
| 301 |
* Returns Zero on success, negative on failure |
| 302 |
*/ |
| 303 |
int __cvmx_helper_xaui_link_set(int ipd_port, union cvmx_helper_link_info link_info) |
| 304 |
{ |
| 305 |
int interface = cvmx_helper_get_interface_num(ipd_port); |
| 306 |
union cvmx_gmxx_tx_xaui_ctl gmxx_tx_xaui_ctl; |
| 307 |
union cvmx_gmxx_rx_xaui_ctl gmxx_rx_xaui_ctl; |
| 308 |
|
| 309 |
gmxx_tx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface)); |
| 310 |
gmxx_rx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RX_XAUI_CTL(interface)); |
| 311 |
|
| 312 |
/* If the link shouldn't be up, then just return */ |
| 313 |
if (!link_info.s.link_up) |
| 314 |
return 0; |
| 315 |
|
| 316 |
/* Do nothing if both RX and TX are happy */ |
| 317 |
if ((gmxx_tx_xaui_ctl.s.ls == 0) && (gmxx_rx_xaui_ctl.s.status == 0)) |
| 318 |
return 0; |
| 319 |
|
| 320 |
/* Bring the link up */ |
| 321 |
return __cvmx_helper_xaui_enable(interface); |
| 322 |
} |