| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/dts-v1/; |
| 3 |
|
| 4 |
#include "microAptiv.dtsi" |
| 5 |
|
| 6 |
/ { |
| 7 |
compatible = "digilent,nexys4ddr"; |
| 8 |
|
| 9 |
aliases { |
| 10 |
serial0 = &axi_uart16550; |
| 11 |
}; |
| 12 |
chosen { |
| 13 |
bootargs = "console=ttyS0,115200"; |
| 14 |
stdout-path = "serial0:115200n8"; |
| 15 |
}; |
| 16 |
|
| 17 |
memory { |
| 18 |
device_type = "memory"; |
| 19 |
reg = <0x0 0x08000000>; |
| 20 |
}; |
| 21 |
|
| 22 |
cpuintc: interrupt-controller { |
| 23 |
#address-cells = <0>; |
| 24 |
#interrupt-cells = <1>; |
| 25 |
interrupt-controller; |
| 26 |
compatible = "mti,cpu-interrupt-controller"; |
| 27 |
}; |
| 28 |
|
| 29 |
axi_intc: interrupt-controller@10200000 { |
| 30 |
#interrupt-cells = <1>; |
| 31 |
compatible = "xlnx,xps-intc-1.00.a"; |
| 32 |
interrupt-controller; |
| 33 |
reg = <0x10200000 0x10000>; |
| 34 |
xlnx,kind-of-intr = <0x0>; |
| 35 |
xlnx,num-intr-inputs = <0x6>; |
| 36 |
|
| 37 |
interrupt-parent = <&cpuintc>; |
| 38 |
interrupts = <6>; |
| 39 |
}; |
| 40 |
|
| 41 |
axi_gpio: gpio@10600000 { |
| 42 |
#gpio-cells = <1>; |
| 43 |
compatible = "xlnx,xps-gpio-1.00.a"; |
| 44 |
gpio-controller; |
| 45 |
reg = <0x10600000 0x10000>; |
| 46 |
xlnx,all-inputs = <0x0>; |
| 47 |
xlnx,dout-default = <0x0>; |
| 48 |
xlnx,gpio-width = <0x16>; |
| 49 |
xlnx,interrupt-present = <0x0>; |
| 50 |
xlnx,is-dual = <0x0>; |
| 51 |
xlnx,tri-default = <0xffffffff>; |
| 52 |
} ; |
| 53 |
|
| 54 |
axi_ethernetlite: ethernet@10e00000 { |
| 55 |
compatible = "xlnx,xps-ethernetlite-3.00.a"; |
| 56 |
device_type = "network"; |
| 57 |
interrupt-parent = <&axi_intc>; |
| 58 |
interrupts = <1>; |
| 59 |
phy-handle = <&phy0>; |
| 60 |
reg = <0x10e00000 0x10000>; |
| 61 |
xlnx,duplex = <0x1>; |
| 62 |
xlnx,include-global-buffers = <0x1>; |
| 63 |
xlnx,include-internal-loopback = <0x0>; |
| 64 |
xlnx,include-mdio = <0x1>; |
| 65 |
xlnx,instance = "axi_ethernetlite_inst"; |
| 66 |
xlnx,rx-ping-pong = <0x1>; |
| 67 |
xlnx,s-axi-id-width = <0x1>; |
| 68 |
xlnx,tx-ping-pong = <0x1>; |
| 69 |
xlnx,use-internal = <0x0>; |
| 70 |
mdio { |
| 71 |
#address-cells = <1>; |
| 72 |
#size-cells = <0>; |
| 73 |
phy0: phy@1 { |
| 74 |
device_type = "ethernet-phy"; |
| 75 |
reg = <1>; |
| 76 |
}; |
| 77 |
}; |
| 78 |
}; |
| 79 |
|
| 80 |
axi_uart16550: serial@10400000 { |
| 81 |
compatible = "ns16550a"; |
| 82 |
reg = <0x10400000 0x10000>; |
| 83 |
|
| 84 |
reg-shift = <2>; |
| 85 |
reg-offset = <0x1000>; |
| 86 |
|
| 87 |
clocks = <&ext>; |
| 88 |
|
| 89 |
interrupt-parent = <&axi_intc>; |
| 90 |
interrupts = <0>; |
| 91 |
}; |
| 92 |
|
| 93 |
axi_i2c: i2c@10a00000 { |
| 94 |
compatible = "xlnx,xps-iic-2.00.a"; |
| 95 |
interrupt-parent = <&axi_intc>; |
| 96 |
interrupts = <4>; |
| 97 |
reg = < 0x10a00000 0x10000 >; |
| 98 |
clocks = <&ext>; |
| 99 |
xlnx,clk-freq = <0x5f5e100>; |
| 100 |
xlnx,family = "Artix7"; |
| 101 |
xlnx,gpo-width = <0x1>; |
| 102 |
xlnx,iic-freq = <0x186a0>; |
| 103 |
xlnx,scl-inertial-delay = <0x0>; |
| 104 |
xlnx,sda-inertial-delay = <0x0>; |
| 105 |
xlnx,ten-bit-adr = <0x0>; |
| 106 |
#address-cells = <1>; |
| 107 |
#size-cells = <0>; |
| 108 |
|
| 109 |
ad7420@4b { |
| 110 |
compatible = "adi,adt7420"; |
| 111 |
reg = <0x4b>; |
| 112 |
}; |
| 113 |
} ; |
| 114 |
}; |
| 115 |
|
| 116 |
&ext { |
| 117 |
clock-frequency = <50000000>; |
| 118 |
}; |