| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Copyright (c) 2019 Stefan Roese <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include "mt7628a.dtsi" |
| 9 |
|
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/input/input.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
compatible = "gardena,smart-gateway-mt7688", "ralink,mt7688a-soc", |
| 15 |
"ralink,mt7628a-soc"; |
| 16 |
model = "GARDENA smart Gateway (MT7688)"; |
| 17 |
|
| 18 |
memory@0 { |
| 19 |
device_type = "memory"; |
| 20 |
reg = <0x0 0x8000000>; |
| 21 |
}; |
| 22 |
|
| 23 |
gpio-keys { |
| 24 |
compatible = "gpio-keys"; |
| 25 |
|
| 26 |
pinctrl-names = "default"; |
| 27 |
pinctrl-0 = <&pinmux_gpio_gpio>; /* GPIO11 */ |
| 28 |
|
| 29 |
button { |
| 30 |
label = "USER_BTN1"; |
| 31 |
gpios = <&gpio 11 GPIO_ACTIVE_LOW>; |
| 32 |
linux,code =<KEY_PROG1> ; |
| 33 |
}; |
| 34 |
}; |
| 35 |
|
| 36 |
leds { |
| 37 |
compatible = "gpio-leds"; |
| 38 |
|
| 39 |
pinctrl-names = "default"; |
| 40 |
pinctrl-0 = <&pinmux_pwm0_gpio>, /* GPIO18 */ |
| 41 |
<&pinmux_pwm1_gpio>, /* GPIO19 */ |
| 42 |
<&pinmux_sdmode_gpio>, /* GPIO22..29 */ |
| 43 |
<&pinmux_p0led_an_gpio>; /* GPIO43 */ |
| 44 |
/* |
| 45 |
* <&pinmux_i2s_gpio> (covers GPIO0..3) is needed here as |
| 46 |
* well for GPIO3. But this is already claimed for uart1 |
| 47 |
* (see below). So we can't include it in this LED node. |
| 48 |
*/ |
| 49 |
|
| 50 |
led-power-blue { |
| 51 |
label = "smartgw:power:blue"; |
| 52 |
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; |
| 53 |
default-state = "off"; |
| 54 |
}; |
| 55 |
|
| 56 |
led-power-green { |
| 57 |
label = "smartgw:power:green"; |
| 58 |
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; |
| 59 |
linux,default-trigger = "timer"; |
| 60 |
}; |
| 61 |
|
| 62 |
led-power-red { |
| 63 |
label = "smartgw:power:red"; |
| 64 |
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; |
| 65 |
default-state = "off"; |
| 66 |
}; |
| 67 |
|
| 68 |
led-radio-blue { |
| 69 |
label = "smartgw:radio:blue"; |
| 70 |
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; |
| 71 |
default-state = "off"; |
| 72 |
}; |
| 73 |
|
| 74 |
led-radio-green { |
| 75 |
label = "smartgw:radio:green"; |
| 76 |
gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; |
| 77 |
default-state = "off"; |
| 78 |
}; |
| 79 |
|
| 80 |
led-radio-red { |
| 81 |
label = "smartgw:radio:red"; |
| 82 |
gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; |
| 83 |
default-state = "off"; |
| 84 |
}; |
| 85 |
|
| 86 |
led-internet-blue { |
| 87 |
label = "smartgw:internet:blue"; |
| 88 |
gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; |
| 89 |
default-state = "off"; |
| 90 |
}; |
| 91 |
|
| 92 |
led-internet-green { |
| 93 |
label = "smartgw:internet:green"; |
| 94 |
gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; |
| 95 |
default-state = "off"; |
| 96 |
}; |
| 97 |
|
| 98 |
led-internet-red { |
| 99 |
label = "smartgw:internet:red"; |
| 100 |
gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; |
| 101 |
default-state = "off"; |
| 102 |
}; |
| 103 |
|
| 104 |
led-ethernet-link { |
| 105 |
label = "smartgw:eth:link"; |
| 106 |
gpios = <&gpio 3 GPIO_ACTIVE_LOW>; |
| 107 |
linux,default-trigger = "netdev"; |
| 108 |
}; |
| 109 |
|
| 110 |
led-ethernet-activity { |
| 111 |
label = "smartgw:eth:act"; |
| 112 |
gpios = <&gpio 43 GPIO_ACTIVE_LOW>; |
| 113 |
linux,default-trigger = "netdev"; |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
aliases { |
| 118 |
serial0 = &uart0; |
| 119 |
}; |
| 120 |
}; |
| 121 |
|
| 122 |
&i2c { |
| 123 |
status = "okay"; |
| 124 |
}; |
| 125 |
|
| 126 |
&spi { |
| 127 |
status = "okay"; |
| 128 |
|
| 129 |
pinctrl-names = "default"; |
| 130 |
pinctrl-0 = <&pinmux_spi_spi>, <&pinmux_spi_cs1_cs>; |
| 131 |
|
| 132 |
flash@0 { |
| 133 |
compatible = "jedec,spi-nor"; |
| 134 |
reg = <0>; |
| 135 |
spi-max-frequency = <40000000>; |
| 136 |
|
| 137 |
partitions { |
| 138 |
compatible = "fixed-partitions"; |
| 139 |
#address-cells = <1>; |
| 140 |
#size-cells = <1>; |
| 141 |
|
| 142 |
partition@0 { |
| 143 |
label = "uboot"; |
| 144 |
reg = <0x0 0xa0000>; |
| 145 |
read-only; |
| 146 |
}; |
| 147 |
|
| 148 |
partition@a0000 { |
| 149 |
label = "uboot_env0"; |
| 150 |
reg = <0xa0000 0x10000>; |
| 151 |
}; |
| 152 |
|
| 153 |
partition@b0000 { |
| 154 |
label = "uboot_env1"; |
| 155 |
reg = <0xb0000 0x10000>; |
| 156 |
}; |
| 157 |
|
| 158 |
factory: partition@c0000 { |
| 159 |
label = "factory"; |
| 160 |
reg = <0xc0000 0x10000>; |
| 161 |
read-only; |
| 162 |
}; |
| 163 |
}; |
| 164 |
}; |
| 165 |
|
| 166 |
nand_flash@1 { |
| 167 |
compatible = "spi-nand"; |
| 168 |
linux,mtd-name = "gd5f"; |
| 169 |
reg = <1>; |
| 170 |
spi-max-frequency = <40000000>; |
| 171 |
}; |
| 172 |
}; |
| 173 |
|
| 174 |
&uart1 { |
| 175 |
status = "okay"; |
| 176 |
|
| 177 |
pinctrl-names = "default"; |
| 178 |
pinctrl-0 = <&pinmux_i2s_gpio>; /* GPIO0..3 */ |
| 179 |
|
| 180 |
fifo-size = <8>; |
| 181 |
tx-threshold = <8>; |
| 182 |
|
| 183 |
rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; |
| 184 |
cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>; |
| 185 |
}; |
| 186 |
|
| 187 |
&uart2 { |
| 188 |
status = "okay"; |
| 189 |
|
| 190 |
pinctrl-names = "default"; |
| 191 |
pinctrl-0 = <&pinmux_p2led_an_gpio>, /* GPIO41 */ |
| 192 |
<&pinmux_p3led_an_gpio>; /* GPIO40 */ |
| 193 |
|
| 194 |
rts-gpios = <&gpio 40 GPIO_ACTIVE_LOW>; |
| 195 |
cts-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; |
| 196 |
}; |
| 197 |
|
| 198 |
&watchdog { |
| 199 |
status = "okay"; |
| 200 |
}; |
| 201 |
|
| 202 |
&wmac { |
| 203 |
status = "okay"; |
| 204 |
mediatek,mtd-eeprom = <&factory 0x0000>; |
| 205 |
}; |