| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2015 Microchip Technology Inc. All rights reserved. |
| 4 |
*/ |
| 5 |
#include <dt-bindings/clock/microchip,pic32-clock.h> |
| 6 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 7 |
|
| 8 |
/ { |
| 9 |
#address-cells = <1>; |
| 10 |
#size-cells = <1>; |
| 11 |
interrupt-parent = <&evic>; |
| 12 |
|
| 13 |
aliases { |
| 14 |
gpio0 = &gpio0; |
| 15 |
gpio1 = &gpio1; |
| 16 |
gpio2 = &gpio2; |
| 17 |
gpio3 = &gpio3; |
| 18 |
gpio4 = &gpio4; |
| 19 |
gpio5 = &gpio5; |
| 20 |
gpio6 = &gpio6; |
| 21 |
gpio7 = &gpio7; |
| 22 |
gpio8 = &gpio8; |
| 23 |
gpio9 = &gpio9; |
| 24 |
serial0 = &uart1; |
| 25 |
serial1 = &uart2; |
| 26 |
serial2 = &uart3; |
| 27 |
serial3 = &uart4; |
| 28 |
serial4 = &uart5; |
| 29 |
serial5 = &uart6; |
| 30 |
}; |
| 31 |
|
| 32 |
cpus { |
| 33 |
#address-cells = <1>; |
| 34 |
#size-cells = <0>; |
| 35 |
|
| 36 |
cpu@0 { |
| 37 |
compatible = "mti,mips14KEc"; |
| 38 |
device_type = "cpu"; |
| 39 |
}; |
| 40 |
}; |
| 41 |
|
| 42 |
soc { |
| 43 |
compatible = "microchip,pic32mzda-infra"; |
| 44 |
interrupts = <0 IRQ_TYPE_EDGE_RISING>; |
| 45 |
}; |
| 46 |
|
| 47 |
/* external clock input on TxCLKI pin */ |
| 48 |
txcki: txcki_clk { |
| 49 |
#clock-cells = <0>; |
| 50 |
compatible = "fixed-clock"; |
| 51 |
clock-frequency = <4000000>; |
| 52 |
status = "disabled"; |
| 53 |
}; |
| 54 |
|
| 55 |
/* external input on REFCLKIx pin */ |
| 56 |
refix: refix_clk { |
| 57 |
#clock-cells = <0>; |
| 58 |
compatible = "fixed-clock"; |
| 59 |
clock-frequency = <24000000>; |
| 60 |
status = "disabled"; |
| 61 |
}; |
| 62 |
|
| 63 |
rootclk: clock-controller@1f801200 { |
| 64 |
compatible = "microchip,pic32mzda-clk"; |
| 65 |
reg = <0x1f801200 0x200>; |
| 66 |
#clock-cells = <1>; |
| 67 |
microchip,pic32mzda-sosc; |
| 68 |
}; |
| 69 |
|
| 70 |
evic: interrupt-controller@1f810000 { |
| 71 |
compatible = "microchip,pic32mzda-evic"; |
| 72 |
interrupt-controller; |
| 73 |
#interrupt-cells = <2>; |
| 74 |
reg = <0x1f810000 0x1000>; |
| 75 |
microchip,external-irqs = <3 8 13 18 23>; |
| 76 |
}; |
| 77 |
|
| 78 |
pic32_pinctrl: pinctrl@1f801400 { |
| 79 |
#address-cells = <1>; |
| 80 |
#size-cells = <1>; |
| 81 |
compatible = "microchip,pic32mzda-pinctrl"; |
| 82 |
reg = <0x1f801400 0x400>; |
| 83 |
clocks = <&rootclk PB1CLK>; |
| 84 |
}; |
| 85 |
|
| 86 |
/* PORTA */ |
| 87 |
gpio0: gpio0@1f860000 { |
| 88 |
compatible = "microchip,pic32mzda-gpio"; |
| 89 |
reg = <0x1f860000 0x100>; |
| 90 |
interrupts = <118 IRQ_TYPE_LEVEL_HIGH>; |
| 91 |
#gpio-cells = <2>; |
| 92 |
gpio-controller; |
| 93 |
interrupt-controller; |
| 94 |
#interrupt-cells = <2>; |
| 95 |
clocks = <&rootclk PB4CLK>; |
| 96 |
microchip,gpio-bank = <0>; |
| 97 |
gpio-ranges = <&pic32_pinctrl 0 0 16>; |
| 98 |
}; |
| 99 |
|
| 100 |
/* PORTB */ |
| 101 |
gpio1: gpio1@1f860100 { |
| 102 |
compatible = "microchip,pic32mzda-gpio"; |
| 103 |
reg = <0x1f860100 0x100>; |
| 104 |
interrupts = <119 IRQ_TYPE_LEVEL_HIGH>; |
| 105 |
#gpio-cells = <2>; |
| 106 |
gpio-controller; |
| 107 |
interrupt-controller; |
| 108 |
#interrupt-cells = <2>; |
| 109 |
clocks = <&rootclk PB4CLK>; |
| 110 |
microchip,gpio-bank = <1>; |
| 111 |
gpio-ranges = <&pic32_pinctrl 0 16 16>; |
| 112 |
}; |
| 113 |
|
| 114 |
/* PORTC */ |
| 115 |
gpio2: gpio2@1f860200 { |
| 116 |
compatible = "microchip,pic32mzda-gpio"; |
| 117 |
reg = <0x1f860200 0x100>; |
| 118 |
interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; |
| 119 |
#gpio-cells = <2>; |
| 120 |
gpio-controller; |
| 121 |
interrupt-controller; |
| 122 |
#interrupt-cells = <2>; |
| 123 |
clocks = <&rootclk PB4CLK>; |
| 124 |
microchip,gpio-bank = <2>; |
| 125 |
gpio-ranges = <&pic32_pinctrl 0 32 16>; |
| 126 |
}; |
| 127 |
|
| 128 |
/* PORTD */ |
| 129 |
gpio3: gpio3@1f860300 { |
| 130 |
compatible = "microchip,pic32mzda-gpio"; |
| 131 |
reg = <0x1f860300 0x100>; |
| 132 |
interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; |
| 133 |
#gpio-cells = <2>; |
| 134 |
gpio-controller; |
| 135 |
interrupt-controller; |
| 136 |
#interrupt-cells = <2>; |
| 137 |
clocks = <&rootclk PB4CLK>; |
| 138 |
microchip,gpio-bank = <3>; |
| 139 |
gpio-ranges = <&pic32_pinctrl 0 48 16>; |
| 140 |
}; |
| 141 |
|
| 142 |
/* PORTE */ |
| 143 |
gpio4: gpio4@1f860400 { |
| 144 |
compatible = "microchip,pic32mzda-gpio"; |
| 145 |
reg = <0x1f860400 0x100>; |
| 146 |
interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; |
| 147 |
#gpio-cells = <2>; |
| 148 |
gpio-controller; |
| 149 |
interrupt-controller; |
| 150 |
#interrupt-cells = <2>; |
| 151 |
clocks = <&rootclk PB4CLK>; |
| 152 |
microchip,gpio-bank = <4>; |
| 153 |
gpio-ranges = <&pic32_pinctrl 0 64 16>; |
| 154 |
}; |
| 155 |
|
| 156 |
/* PORTF */ |
| 157 |
gpio5: gpio5@1f860500 { |
| 158 |
compatible = "microchip,pic32mzda-gpio"; |
| 159 |
reg = <0x1f860500 0x100>; |
| 160 |
interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; |
| 161 |
#gpio-cells = <2>; |
| 162 |
gpio-controller; |
| 163 |
interrupt-controller; |
| 164 |
#interrupt-cells = <2>; |
| 165 |
clocks = <&rootclk PB4CLK>; |
| 166 |
microchip,gpio-bank = <5>; |
| 167 |
gpio-ranges = <&pic32_pinctrl 0 80 16>; |
| 168 |
}; |
| 169 |
|
| 170 |
/* PORTG */ |
| 171 |
gpio6: gpio6@1f860600 { |
| 172 |
compatible = "microchip,pic32mzda-gpio"; |
| 173 |
reg = <0x1f860600 0x100>; |
| 174 |
interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; |
| 175 |
#gpio-cells = <2>; |
| 176 |
gpio-controller; |
| 177 |
interrupt-controller; |
| 178 |
#interrupt-cells = <2>; |
| 179 |
clocks = <&rootclk PB4CLK>; |
| 180 |
microchip,gpio-bank = <6>; |
| 181 |
gpio-ranges = <&pic32_pinctrl 0 96 16>; |
| 182 |
}; |
| 183 |
|
| 184 |
/* PORTH */ |
| 185 |
gpio7: gpio7@1f860700 { |
| 186 |
compatible = "microchip,pic32mzda-gpio"; |
| 187 |
reg = <0x1f860700 0x100>; |
| 188 |
interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; |
| 189 |
#gpio-cells = <2>; |
| 190 |
gpio-controller; |
| 191 |
interrupt-controller; |
| 192 |
#interrupt-cells = <2>; |
| 193 |
clocks = <&rootclk PB4CLK>; |
| 194 |
microchip,gpio-bank = <7>; |
| 195 |
gpio-ranges = <&pic32_pinctrl 0 112 16>; |
| 196 |
}; |
| 197 |
|
| 198 |
/* PORTI does not exist */ |
| 199 |
|
| 200 |
/* PORTJ */ |
| 201 |
gpio8: gpio8@1f860800 { |
| 202 |
compatible = "microchip,pic32mzda-gpio"; |
| 203 |
reg = <0x1f860800 0x100>; |
| 204 |
interrupts = <126 IRQ_TYPE_LEVEL_HIGH>; |
| 205 |
#gpio-cells = <2>; |
| 206 |
gpio-controller; |
| 207 |
interrupt-controller; |
| 208 |
#interrupt-cells = <2>; |
| 209 |
clocks = <&rootclk PB4CLK>; |
| 210 |
microchip,gpio-bank = <8>; |
| 211 |
gpio-ranges = <&pic32_pinctrl 0 128 16>; |
| 212 |
}; |
| 213 |
|
| 214 |
/* PORTK */ |
| 215 |
gpio9: gpio9@1f860900 { |
| 216 |
compatible = "microchip,pic32mzda-gpio"; |
| 217 |
reg = <0x1f860900 0x100>; |
| 218 |
interrupts = <127 IRQ_TYPE_LEVEL_HIGH>; |
| 219 |
#gpio-cells = <2>; |
| 220 |
gpio-controller; |
| 221 |
interrupt-controller; |
| 222 |
#interrupt-cells = <2>; |
| 223 |
clocks = <&rootclk PB4CLK>; |
| 224 |
microchip,gpio-bank = <9>; |
| 225 |
gpio-ranges = <&pic32_pinctrl 0 144 16>; |
| 226 |
}; |
| 227 |
|
| 228 |
sdhci: mmc@1f8ec000 { |
| 229 |
compatible = "microchip,pic32mzda-sdhci"; |
| 230 |
reg = <0x1f8ec000 0x100>; |
| 231 |
interrupts = <191 IRQ_TYPE_LEVEL_HIGH>; |
| 232 |
clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>; |
| 233 |
clock-names = "base_clk", "sys_clk"; |
| 234 |
bus-width = <4>; |
| 235 |
cap-sd-highspeed; |
| 236 |
status = "disabled"; |
| 237 |
}; |
| 238 |
|
| 239 |
uart1: serial@1f822000 { |
| 240 |
compatible = "microchip,pic32mzda-uart"; |
| 241 |
reg = <0x1f822000 0x50>; |
| 242 |
interrupts = <112 IRQ_TYPE_LEVEL_HIGH>, |
| 243 |
<113 IRQ_TYPE_LEVEL_HIGH>, |
| 244 |
<114 IRQ_TYPE_LEVEL_HIGH>; |
| 245 |
clocks = <&rootclk PB2CLK>; |
| 246 |
status = "disabled"; |
| 247 |
}; |
| 248 |
|
| 249 |
uart2: serial@1f822200 { |
| 250 |
compatible = "microchip,pic32mzda-uart"; |
| 251 |
reg = <0x1f822200 0x50>; |
| 252 |
interrupts = <145 IRQ_TYPE_LEVEL_HIGH>, |
| 253 |
<146 IRQ_TYPE_LEVEL_HIGH>, |
| 254 |
<147 IRQ_TYPE_LEVEL_HIGH>; |
| 255 |
clocks = <&rootclk PB2CLK>; |
| 256 |
status = "disabled"; |
| 257 |
}; |
| 258 |
|
| 259 |
uart3: serial@1f822400 { |
| 260 |
compatible = "microchip,pic32mzda-uart"; |
| 261 |
reg = <0x1f822400 0x50>; |
| 262 |
interrupts = <157 IRQ_TYPE_LEVEL_HIGH>, |
| 263 |
<158 IRQ_TYPE_LEVEL_HIGH>, |
| 264 |
<159 IRQ_TYPE_LEVEL_HIGH>; |
| 265 |
clocks = <&rootclk PB2CLK>; |
| 266 |
status = "disabled"; |
| 267 |
}; |
| 268 |
|
| 269 |
uart4: serial@1f822600 { |
| 270 |
compatible = "microchip,pic32mzda-uart"; |
| 271 |
reg = <0x1f822600 0x50>; |
| 272 |
interrupts = <170 IRQ_TYPE_LEVEL_HIGH>, |
| 273 |
<171 IRQ_TYPE_LEVEL_HIGH>, |
| 274 |
<172 IRQ_TYPE_LEVEL_HIGH>; |
| 275 |
clocks = <&rootclk PB2CLK>; |
| 276 |
status = "disabled"; |
| 277 |
}; |
| 278 |
|
| 279 |
uart5: serial@1f822800 { |
| 280 |
compatible = "microchip,pic32mzda-uart"; |
| 281 |
reg = <0x1f822800 0x50>; |
| 282 |
interrupts = <179 IRQ_TYPE_LEVEL_HIGH>, |
| 283 |
<180 IRQ_TYPE_LEVEL_HIGH>, |
| 284 |
<181 IRQ_TYPE_LEVEL_HIGH>; |
| 285 |
clocks = <&rootclk PB2CLK>; |
| 286 |
status = "disabled"; |
| 287 |
}; |
| 288 |
|
| 289 |
uart6: serial@1f822A00 { |
| 290 |
compatible = "microchip,pic32mzda-uart"; |
| 291 |
reg = <0x1f822A00 0x50>; |
| 292 |
interrupts = <188 IRQ_TYPE_LEVEL_HIGH>, |
| 293 |
<189 IRQ_TYPE_LEVEL_HIGH>, |
| 294 |
<190 IRQ_TYPE_LEVEL_HIGH>; |
| 295 |
clocks = <&rootclk PB2CLK>; |
| 296 |
status = "disabled"; |
| 297 |
}; |
| 298 |
}; |