| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/dts-v1/; |
| 3 |
|
| 4 |
/memreserve/ 0x00000000 0x00001000; // reserved |
| 5 |
/memreserve/ 0x00001000 0x000ef000; // ROM data |
| 6 |
/memreserve/ 0x000f0000 0x004cc000; // reserved |
| 7 |
|
| 8 |
#include <dt-bindings/interrupt-controller/mips-gic.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
#address-cells = <1>; |
| 12 |
#size-cells = <1>; |
| 13 |
compatible = "mti,sead-3"; |
| 14 |
model = "MIPS SEAD-3"; |
| 15 |
|
| 16 |
chosen { |
| 17 |
stdout-path = "serial1:115200"; |
| 18 |
}; |
| 19 |
|
| 20 |
aliases { |
| 21 |
serial0 = &uart0; |
| 22 |
serial1 = &uart1; |
| 23 |
}; |
| 24 |
|
| 25 |
cpus { |
| 26 |
cpu@0 { |
| 27 |
compatible = "mti,mips14KEc", "mti,mips14Kc"; |
| 28 |
}; |
| 29 |
}; |
| 30 |
|
| 31 |
memory { |
| 32 |
device_type = "memory"; |
| 33 |
reg = <0x0 0x08000000>; |
| 34 |
}; |
| 35 |
|
| 36 |
cpu_intc: interrupt-controller { |
| 37 |
compatible = "mti,cpu-interrupt-controller"; |
| 38 |
|
| 39 |
interrupt-controller; |
| 40 |
#interrupt-cells = <1>; |
| 41 |
}; |
| 42 |
|
| 43 |
gic: interrupt-controller@1b1c0000 { |
| 44 |
compatible = "mti,gic"; |
| 45 |
reg = <0x1b1c0000 0x20000>; |
| 46 |
|
| 47 |
interrupt-controller; |
| 48 |
#interrupt-cells = <3>; |
| 49 |
|
| 50 |
/* |
| 51 |
* Declare the interrupt-parent even though the mti,gic |
| 52 |
* binding doesn't require it, such that the kernel can |
| 53 |
* figure out that cpu_intc is the root interrupt |
| 54 |
* controller & should be probed first. |
| 55 |
*/ |
| 56 |
interrupt-parent = <&cpu_intc>; |
| 57 |
}; |
| 58 |
|
| 59 |
usb@1b200000 { |
| 60 |
compatible = "generic-ehci"; |
| 61 |
reg = <0x1b200000 0x1000>; |
| 62 |
|
| 63 |
interrupt-parent = <&gic>; |
| 64 |
interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */ |
| 65 |
|
| 66 |
has-transaction-translator; |
| 67 |
}; |
| 68 |
|
| 69 |
flash@1c000000 { |
| 70 |
compatible = "intel,28f128j3", "cfi-flash"; |
| 71 |
reg = <0x1c000000 0x2000000>; |
| 72 |
#address-cells = <1>; |
| 73 |
#size-cells = <1>; |
| 74 |
bank-width = <4>; |
| 75 |
|
| 76 |
partitions { |
| 77 |
compatible = "fixed-partitions"; |
| 78 |
#address-cells = <1>; |
| 79 |
#size-cells = <1>; |
| 80 |
|
| 81 |
user-fs@0 { |
| 82 |
label = "User FS"; |
| 83 |
reg = <0x0 0x1fc0000>; |
| 84 |
}; |
| 85 |
|
| 86 |
board-config@3e0000 { |
| 87 |
label = "Board Config"; |
| 88 |
reg = <0x1fc0000 0x40000>; |
| 89 |
}; |
| 90 |
}; |
| 91 |
}; |
| 92 |
|
| 93 |
fpga_regs: system-controller@1f000000 { |
| 94 |
compatible = "mti,sead3-fpga", "syscon", "simple-mfd"; |
| 95 |
reg = <0x1f000000 0x200>; |
| 96 |
|
| 97 |
reboot { |
| 98 |
compatible = "syscon-reboot"; |
| 99 |
regmap = <&fpga_regs>; |
| 100 |
offset = <0x50>; |
| 101 |
mask = <0x4d>; |
| 102 |
}; |
| 103 |
|
| 104 |
poweroff { |
| 105 |
compatible = "restart-poweroff"; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
system-controller@1f000200 { |
| 110 |
compatible = "mti,sead3-cpld", "syscon", "simple-mfd"; |
| 111 |
reg = <0x1f000200 0x300>; |
| 112 |
|
| 113 |
[email protected] { |
| 114 |
compatible = "register-bit-led"; |
| 115 |
offset = <0x10>; |
| 116 |
mask = <0x1>; |
| 117 |
label = "pled0"; |
| 118 |
}; |
| 119 |
[email protected] { |
| 120 |
compatible = "register-bit-led"; |
| 121 |
offset = <0x10>; |
| 122 |
mask = <0x2>; |
| 123 |
label = "pled1"; |
| 124 |
}; |
| 125 |
[email protected] { |
| 126 |
compatible = "register-bit-led"; |
| 127 |
offset = <0x10>; |
| 128 |
mask = <0x4>; |
| 129 |
label = "pled2"; |
| 130 |
}; |
| 131 |
[email protected] { |
| 132 |
compatible = "register-bit-led"; |
| 133 |
offset = <0x10>; |
| 134 |
mask = <0x8>; |
| 135 |
label = "pled3"; |
| 136 |
}; |
| 137 |
[email protected] { |
| 138 |
compatible = "register-bit-led"; |
| 139 |
offset = <0x10>; |
| 140 |
mask = <0x10>; |
| 141 |
label = "pled4"; |
| 142 |
}; |
| 143 |
[email protected] { |
| 144 |
compatible = "register-bit-led"; |
| 145 |
offset = <0x10>; |
| 146 |
mask = <0x20>; |
| 147 |
label = "pled5"; |
| 148 |
}; |
| 149 |
[email protected] { |
| 150 |
compatible = "register-bit-led"; |
| 151 |
offset = <0x10>; |
| 152 |
mask = <0x40>; |
| 153 |
label = "pled6"; |
| 154 |
}; |
| 155 |
[email protected] { |
| 156 |
compatible = "register-bit-led"; |
| 157 |
offset = <0x10>; |
| 158 |
mask = <0x80>; |
| 159 |
label = "pled7"; |
| 160 |
}; |
| 161 |
|
| 162 |
[email protected] { |
| 163 |
compatible = "register-bit-led"; |
| 164 |
offset = <0x18>; |
| 165 |
mask = <0x1>; |
| 166 |
label = "fled0"; |
| 167 |
}; |
| 168 |
[email protected] { |
| 169 |
compatible = "register-bit-led"; |
| 170 |
offset = <0x18>; |
| 171 |
mask = <0x2>; |
| 172 |
label = "fled1"; |
| 173 |
}; |
| 174 |
[email protected] { |
| 175 |
compatible = "register-bit-led"; |
| 176 |
offset = <0x18>; |
| 177 |
mask = <0x4>; |
| 178 |
label = "fled2"; |
| 179 |
}; |
| 180 |
[email protected] { |
| 181 |
compatible = "register-bit-led"; |
| 182 |
offset = <0x18>; |
| 183 |
mask = <0x8>; |
| 184 |
label = "fled3"; |
| 185 |
}; |
| 186 |
[email protected] { |
| 187 |
compatible = "register-bit-led"; |
| 188 |
offset = <0x18>; |
| 189 |
mask = <0x10>; |
| 190 |
label = "fled4"; |
| 191 |
}; |
| 192 |
[email protected] { |
| 193 |
compatible = "register-bit-led"; |
| 194 |
offset = <0x18>; |
| 195 |
mask = <0x20>; |
| 196 |
label = "fled5"; |
| 197 |
}; |
| 198 |
[email protected] { |
| 199 |
compatible = "register-bit-led"; |
| 200 |
offset = <0x18>; |
| 201 |
mask = <0x40>; |
| 202 |
label = "fled6"; |
| 203 |
}; |
| 204 |
[email protected] { |
| 205 |
compatible = "register-bit-led"; |
| 206 |
offset = <0x18>; |
| 207 |
mask = <0x80>; |
| 208 |
label = "fled7"; |
| 209 |
}; |
| 210 |
|
| 211 |
lcd@200 { |
| 212 |
compatible = "mti,sead3-lcd"; |
| 213 |
offset = <0x200>; |
| 214 |
}; |
| 215 |
}; |
| 216 |
|
| 217 |
/* UART connected to FTDI & miniUSB socket */ |
| 218 |
uart0: uart@1f000900 { |
| 219 |
compatible = "ns16550a"; |
| 220 |
reg = <0x1f000900 0x20>; |
| 221 |
reg-io-width = <4>; |
| 222 |
reg-shift = <2>; |
| 223 |
|
| 224 |
clock-frequency = <14745600>; |
| 225 |
|
| 226 |
interrupt-parent = <&gic>; |
| 227 |
interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>; /* GIC 3 or CPU 4 */ |
| 228 |
|
| 229 |
no-loopback-test; |
| 230 |
}; |
| 231 |
|
| 232 |
/* UART connected to RS232 socket */ |
| 233 |
uart1: uart@1f000800 { |
| 234 |
compatible = "ns16550a"; |
| 235 |
reg = <0x1f000800 0x20>; |
| 236 |
reg-io-width = <4>; |
| 237 |
reg-shift = <2>; |
| 238 |
|
| 239 |
clock-frequency = <14745600>; |
| 240 |
|
| 241 |
interrupt-parent = <&gic>; |
| 242 |
interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>; /* GIC 2 or CPU 4 */ |
| 243 |
|
| 244 |
no-loopback-test; |
| 245 |
}; |
| 246 |
|
| 247 |
ethernet@1f010000 { |
| 248 |
compatible = "smsc,lan9115"; |
| 249 |
reg = <0x1f010000 0x10000>; |
| 250 |
reg-io-width = <4>; |
| 251 |
|
| 252 |
interrupt-parent = <&gic>; |
| 253 |
interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */ |
| 254 |
|
| 255 |
phy-mode = "mii"; |
| 256 |
smsc,irq-push-pull; |
| 257 |
smsc,save-mac-address; |
| 258 |
}; |
| 259 |
}; |