| 1 |
// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ |
| 2 |
/* |
| 3 |
* Copyright 2023 Mobileye Vision Technologies Ltd. |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/interrupt-controller/mips-gic.h> |
| 7 |
|
| 8 |
#include <dt-bindings/clock/mobileye,eyeq5-clk.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
#address-cells = <2>; |
| 12 |
#size-cells = <2>; |
| 13 |
cpus { |
| 14 |
#address-cells = <1>; |
| 15 |
#size-cells = <0>; |
| 16 |
cpu@0 { |
| 17 |
device_type = "cpu"; |
| 18 |
compatible = "img,i6500"; |
| 19 |
reg = <0>; |
| 20 |
clocks = <&olb EQ5C_CPU_CORE0>; |
| 21 |
}; |
| 22 |
}; |
| 23 |
|
| 24 |
reserved-memory { |
| 25 |
#address-cells = <2>; |
| 26 |
#size-cells = <2>; |
| 27 |
ranges; |
| 28 |
|
| 29 |
/* These reserved memory regions are also defined in bootmanager |
| 30 |
* for configuring inbound translation for BARS, don't change |
| 31 |
* these without syncing with bootmanager |
| 32 |
*/ |
| 33 |
shmem0_reserved: shmem@804000000 { |
| 34 |
reg = <0x8 0x04000000 0x0 0x1000000>; |
| 35 |
}; |
| 36 |
shmem1_reserved: shmem@805000000 { |
| 37 |
reg = <0x8 0x05000000 0x0 0x1000000>; |
| 38 |
}; |
| 39 |
pci0_msi_reserved: pci0-msi@806000000 { |
| 40 |
reg = <0x8 0x06000000 0x0 0x100000>; |
| 41 |
}; |
| 42 |
pci1_msi_reserved: pci1-msi@806100000 { |
| 43 |
reg = <0x8 0x06100000 0x0 0x100000>; |
| 44 |
}; |
| 45 |
|
| 46 |
mini_coredump0_reserved: mini-coredump0@806200000 { |
| 47 |
reg = <0x8 0x06200000 0x0 0x100000>; |
| 48 |
}; |
| 49 |
mhm_reserved_0: the-mhm-reserved-0@0 { |
| 50 |
reg = <0x8 0x00000000 0x0 0x0000800>; |
| 51 |
}; |
| 52 |
|
| 53 |
nvram@461fe00 { |
| 54 |
compatible = "mobileye,eyeq5-bootloader-config", "nvmem-rmem"; |
| 55 |
reg = <0x0 0x0461fe00 0x0 0x200>; |
| 56 |
#address-cells = <1>; |
| 57 |
#size-cells = <1>; |
| 58 |
no-map; |
| 59 |
|
| 60 |
nvmem-layout { |
| 61 |
compatible = "fixed-layout"; |
| 62 |
#address-cells = <1>; |
| 63 |
#size-cells = <1>; |
| 64 |
|
| 65 |
eth0_mac: mac@7c { |
| 66 |
reg = <0x7c 0x6>; |
| 67 |
}; |
| 68 |
|
| 69 |
eth1_mac: mac@82 { |
| 70 |
reg = <0x82 0x6>; |
| 71 |
}; |
| 72 |
}; |
| 73 |
}; |
| 74 |
}; |
| 75 |
|
| 76 |
aliases { |
| 77 |
serial0 = &uart0; |
| 78 |
serial1 = &uart1; |
| 79 |
serial2 = &uart2; |
| 80 |
}; |
| 81 |
|
| 82 |
cpu_intc: interrupt-controller { |
| 83 |
compatible = "mti,cpu-interrupt-controller"; |
| 84 |
interrupt-controller; |
| 85 |
#address-cells = <0>; |
| 86 |
#interrupt-cells = <1>; |
| 87 |
}; |
| 88 |
|
| 89 |
xtal: xtal { |
| 90 |
compatible = "fixed-clock"; |
| 91 |
#clock-cells = <0>; |
| 92 |
clock-frequency = <30000000>; |
| 93 |
}; |
| 94 |
|
| 95 |
pclk: pclk { |
| 96 |
compatible = "fixed-clock"; |
| 97 |
#clock-cells = <0>; |
| 98 |
clock-frequency = <250000000>; /* 250MHz */ |
| 99 |
}; |
| 100 |
|
| 101 |
tsu_clk: tsu-clk { |
| 102 |
compatible = "fixed-clock"; |
| 103 |
#clock-cells = <0>; |
| 104 |
clock-frequency = <125000000>; /* 125MHz */ |
| 105 |
}; |
| 106 |
|
| 107 |
soc: soc { |
| 108 |
#address-cells = <2>; |
| 109 |
#size-cells = <2>; |
| 110 |
ranges; |
| 111 |
compatible = "simple-bus"; |
| 112 |
|
| 113 |
i2c0: i2c@300000 { |
| 114 |
compatible = "mobileye,eyeq5-i2c", "arm,primecell"; |
| 115 |
reg = <0 0x300000 0x0 0x1000>; |
| 116 |
interrupt-parent = <&gic>; |
| 117 |
interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>; |
| 118 |
clock-frequency = <400000>; /* Fast mode */ |
| 119 |
#address-cells = <1>; |
| 120 |
#size-cells = <0>; |
| 121 |
clocks = <&olb 35>, <&olb EQ5C_PER_I2C>; |
| 122 |
clock-names = "i2cclk", "apb_pclk"; |
| 123 |
resets = <&olb 0 13>; |
| 124 |
i2c-transfer-timeout-us = <10000>; |
| 125 |
mobileye,olb = <&olb 0>; |
| 126 |
}; |
| 127 |
|
| 128 |
i2c1: i2c@400000 { |
| 129 |
compatible = "mobileye,eyeq5-i2c", "arm,primecell"; |
| 130 |
reg = <0 0x400000 0x0 0x1000>; |
| 131 |
interrupt-parent = <&gic>; |
| 132 |
interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>; |
| 133 |
clock-frequency = <400000>; /* Fast mode */ |
| 134 |
#address-cells = <1>; |
| 135 |
#size-cells = <0>; |
| 136 |
clocks = <&olb 35>, <&olb EQ5C_PER_I2C>; |
| 137 |
clock-names = "i2cclk", "apb_pclk"; |
| 138 |
resets = <&olb 0 14>; |
| 139 |
i2c-transfer-timeout-us = <10000>; |
| 140 |
mobileye,olb = <&olb 1>; |
| 141 |
}; |
| 142 |
|
| 143 |
i2c2: i2c@500000 { |
| 144 |
compatible = "mobileye,eyeq5-i2c", "arm,primecell"; |
| 145 |
reg = <0 0x500000 0x0 0x1000>; |
| 146 |
interrupt-parent = <&gic>; |
| 147 |
interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>; |
| 148 |
clock-frequency = <400000>; /* Fast mode */ |
| 149 |
#address-cells = <1>; |
| 150 |
#size-cells = <0>; |
| 151 |
clocks = <&olb 35>, <&olb EQ5C_PER_I2C>; |
| 152 |
clock-names = "i2cclk", "apb_pclk"; |
| 153 |
resets = <&olb 0 15>; |
| 154 |
i2c-transfer-timeout-us = <10000>; |
| 155 |
mobileye,olb = <&olb 2>; |
| 156 |
}; |
| 157 |
|
| 158 |
i2c3: i2c@600000 { |
| 159 |
compatible = "mobileye,eyeq5-i2c", "arm,primecell"; |
| 160 |
reg = <0 0x600000 0x0 0x1000>; |
| 161 |
interrupt-parent = <&gic>; |
| 162 |
interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>; |
| 163 |
clock-frequency = <400000>; /* Fast mode */ |
| 164 |
#address-cells = <1>; |
| 165 |
#size-cells = <0>; |
| 166 |
clocks = <&olb 35>, <&olb EQ5C_PER_I2C>; |
| 167 |
clock-names = "i2cclk", "apb_pclk"; |
| 168 |
resets = <&olb 0 16>; |
| 169 |
i2c-transfer-timeout-us = <10000>; |
| 170 |
mobileye,olb = <&olb 3>; |
| 171 |
}; |
| 172 |
|
| 173 |
i2c4: i2c@700000 { |
| 174 |
compatible = "mobileye,eyeq5-i2c", "arm,primecell"; |
| 175 |
reg = <0 0x700000 0x0 0x1000>; |
| 176 |
interrupt-parent = <&gic>; |
| 177 |
interrupts = <GIC_SHARED 5 IRQ_TYPE_LEVEL_HIGH>; |
| 178 |
clock-frequency = <400000>; /* Fast mode */ |
| 179 |
#address-cells = <1>; |
| 180 |
#size-cells = <0>; |
| 181 |
clocks = <&olb 35>, <&olb EQ5C_PER_I2C>; |
| 182 |
clock-names = "i2cclk", "apb_pclk"; |
| 183 |
resets = <&olb 0 17>; |
| 184 |
i2c-transfer-timeout-us = <10000>; |
| 185 |
mobileye,olb = <&olb 4>; |
| 186 |
}; |
| 187 |
|
| 188 |
uart0: serial@800000 { |
| 189 |
compatible = "arm,pl011", "arm,primecell"; |
| 190 |
reg = <0 0x800000 0x0 0x1000>; |
| 191 |
reg-io-width = <4>; |
| 192 |
interrupt-parent = <&gic>; |
| 193 |
interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>; |
| 194 |
clocks = <&olb EQ5C_PER_UART>, <&olb EQ5C_PER_OCC>; |
| 195 |
clock-names = "uartclk", "apb_pclk"; |
| 196 |
resets = <&olb 0 10>; |
| 197 |
pinctrl-names = "default"; |
| 198 |
pinctrl-0 = <&uart0_pins>; |
| 199 |
}; |
| 200 |
|
| 201 |
uart1: serial@900000 { |
| 202 |
compatible = "arm,pl011", "arm,primecell"; |
| 203 |
reg = <0 0x900000 0x0 0x1000>; |
| 204 |
reg-io-width = <4>; |
| 205 |
interrupt-parent = <&gic>; |
| 206 |
interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>; |
| 207 |
clocks = <&olb EQ5C_PER_UART>, <&olb EQ5C_PER_OCC>; |
| 208 |
clock-names = "uartclk", "apb_pclk"; |
| 209 |
resets = <&olb 0 11>; |
| 210 |
pinctrl-names = "default"; |
| 211 |
pinctrl-0 = <&uart1_pins>; |
| 212 |
}; |
| 213 |
|
| 214 |
uart2: serial@a00000 { |
| 215 |
compatible = "arm,pl011", "arm,primecell"; |
| 216 |
reg = <0 0xa00000 0x0 0x1000>; |
| 217 |
reg-io-width = <4>; |
| 218 |
interrupt-parent = <&gic>; |
| 219 |
interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>; |
| 220 |
clocks = <&olb EQ5C_PER_UART>, <&olb EQ5C_PER_OCC>; |
| 221 |
clock-names = "uartclk", "apb_pclk"; |
| 222 |
resets = <&olb 0 12>; |
| 223 |
pinctrl-names = "default"; |
| 224 |
pinctrl-0 = <&uart2_pins>; |
| 225 |
}; |
| 226 |
|
| 227 |
olb: system-controller@e00000 { |
| 228 |
compatible = "mobileye,eyeq5-olb", "syscon"; |
| 229 |
reg = <0 0xe00000 0x0 0x400>; |
| 230 |
#reset-cells = <2>; |
| 231 |
#clock-cells = <1>; |
| 232 |
clocks = <&xtal>; |
| 233 |
clock-names = "ref"; |
| 234 |
}; |
| 235 |
|
| 236 |
gic: interrupt-controller@140000 { |
| 237 |
compatible = "mti,gic"; |
| 238 |
reg = <0x0 0x140000 0x0 0x20000>; |
| 239 |
interrupt-controller; |
| 240 |
#interrupt-cells = <3>; |
| 241 |
|
| 242 |
/* |
| 243 |
* Declare the interrupt-parent even though the mti,gic |
| 244 |
* binding doesn't require it, such that the kernel can |
| 245 |
* figure out that cpu_intc is the root interrupt |
| 246 |
* controller & should be probed first. |
| 247 |
*/ |
| 248 |
interrupt-parent = <&cpu_intc>; |
| 249 |
|
| 250 |
timer { |
| 251 |
compatible = "mti,gic-timer"; |
| 252 |
interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>; |
| 253 |
clocks = <&olb EQ5C_CPU_CORE0>; |
| 254 |
}; |
| 255 |
}; |
| 256 |
|
| 257 |
emmc: mmc@2200000 { |
| 258 |
compatible = "mobileye,eyeq-sd4hc", "cdns,sd4hc"; |
| 259 |
reg = <0 0x2200000 0x0 0x1000>; |
| 260 |
interrupt-parent = <&gic>; |
| 261 |
interrupts = <GIC_SHARED 10 IRQ_TYPE_LEVEL_HIGH>; |
| 262 |
clocks = <&olb EQ5C_PER_EMMC>; |
| 263 |
bus-width = <8>; |
| 264 |
max-frequency = <200000000>; |
| 265 |
mmc-ddr-1_8v; |
| 266 |
sd-uhs-ddr50; |
| 267 |
mmc-hs200-1_8v; |
| 268 |
mmc-hs400-1_8v; |
| 269 |
mmc-hs400-enhanced-strobe; |
| 270 |
|
| 271 |
cdns,phy-input-delay-legacy = <4>; |
| 272 |
cdns,phy-input-delay-mmc-highspeed = <2>; |
| 273 |
cdns,phy-input-delay-mmc-ddr = <3>; |
| 274 |
cdns,phy-dll-delay-sdclk = <32>; |
| 275 |
cdns,phy-dll-delay-sdclk-hsmmc = <32>; |
| 276 |
cdns,phy-dll-delay-strobe = <32>; |
| 277 |
}; |
| 278 |
|
| 279 |
gpio0: gpio@1400000 { |
| 280 |
compatible = "mobileye,eyeq5-gpio"; |
| 281 |
reg = <0x0 0x1400000 0x0 0x1000>; |
| 282 |
gpio-bank = <0>; |
| 283 |
ngpios = <29>; |
| 284 |
interrupt-parent = <&gic>; |
| 285 |
interrupts = <GIC_SHARED 14 IRQ_TYPE_LEVEL_HIGH>; |
| 286 |
gpio-controller; |
| 287 |
#gpio-cells = <2>; |
| 288 |
gpio-ranges = <&olb 0 0 29>; |
| 289 |
interrupt-controller; |
| 290 |
#interrupt-cells = <2>; |
| 291 |
resets = <&olb 0 26>; |
| 292 |
}; |
| 293 |
|
| 294 |
gpio1: gpio@1500000 { |
| 295 |
compatible = "mobileye,eyeq5-gpio"; |
| 296 |
reg = <0x0 0x1500000 0x0 0x1000>; |
| 297 |
gpio-bank = <1>; |
| 298 |
ngpios = <23>; |
| 299 |
interrupt-parent = <&gic>; |
| 300 |
interrupts = <GIC_SHARED 14 IRQ_TYPE_LEVEL_HIGH>; |
| 301 |
gpio-controller; |
| 302 |
#gpio-cells = <2>; |
| 303 |
gpio-ranges = <&olb 0 29 23>; |
| 304 |
interrupt-controller; |
| 305 |
#interrupt-cells = <2>; |
| 306 |
resets = <&olb 0 26>; |
| 307 |
}; |
| 308 |
}; |
| 309 |
}; |
| 310 |
|
| 311 |
#include "eyeq5-pins.dtsi" |