Debian Codegraph @

arch/mips/boot/dts/loongson/loongson1.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (c) 2023-2025 Keguang Zhang <[email protected]>
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/clock/loongson,ls1x-clk.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10
11 / {
12 #address-cells = <1>;
13 #size-cells = <1>;
14
15 xtal: clock {
16 compatible = "fixed-clock";
17 clock-output-names = "xtal";
18 #clock-cells = <0>;
19 };
20
21 cpus {
22 #address-cells = <1>;
23 #size-cells = <0>;
24
25 cpu0: cpu@0 {
26 reg = <0>;
27 device_type = "cpu";
28 clocks = <&clkc LS1X_CLKID_CPU>;
29 #clock-cells = <1>;
30 };
31 };
32
33 cpu_intc: interrupt-controller {
34 compatible = "mti,cpu-interrupt-controller";
35 interrupt-controller;
36 #interrupt-cells = <1>;
37 #address-cells = <0>;
38 };
39
40 soc: bus@1fd00000 {
41 compatible = "simple-bus";
42 #address-cells = <1>;
43 #size-cells = <1>;
44 ranges = <0x0 0x1fd00000 0x130000>;
45
46 intc0: interrupt-controller@1040 {
47 compatible = "loongson,ls1x-intc";
48 reg = <0x1040 0x18>;
49 interrupt-controller;
50 interrupt-parent = <&cpu_intc>;
51 interrupts = <2>;
52 #interrupt-cells = <2>;
53 };
54
55 intc1: interrupt-controller@1058 {
56 compatible = "loongson,ls1x-intc";
57 reg = <0x1058 0x18>;
58 interrupt-controller;
59 interrupt-parent = <&cpu_intc>;
60 interrupts = <3>;
61 #interrupt-cells = <2>;
62 };
63
64 intc2: interrupt-controller@1070 {
65 compatible = "loongson,ls1x-intc";
66 reg = <0x1070 0x18>;
67 interrupt-controller;
68 interrupt-parent = <&cpu_intc>;
69 interrupts = <4>;
70 #interrupt-cells = <2>;
71 };
72
73 intc3: interrupt-controller@1088 {
74 compatible = "loongson,ls1x-intc";
75 reg = <0x1088 0x18>;
76 interrupt-controller;
77 interrupt-parent = <&cpu_intc>;
78 interrupts = <5>;
79 #interrupt-cells = <2>;
80 };
81
82 gpio0: gpio@10c0 {
83 compatible = "loongson,ls1x-gpio";
84 reg = <0x10c0 0x4>;
85 gpio-controller;
86 #gpio-cells = <2>;
87 };
88
89 gpio1: gpio@10c4 {
90 compatible = "loongson,ls1x-gpio";
91 reg = <0x10c4 0x4>;
92 gpio-controller;
93 #gpio-cells = <2>;
94 };
95 };
96
97 apb: bus@1fe40000 {
98 compatible = "simple-bus";
99 #address-cells = <1>;
100 #size-cells = <1>;
101 ranges = <0x0 0x1fe40000 0xc0000>;
102
103 uart0: serial@0 {
104 compatible = "ns16550a";
105 reg = <0x0 0x8>;
106 clocks = <&clkc LS1X_CLKID_APB>;
107 interrupt-parent = <&intc0>;
108 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
109 status = "disabled";
110 };
111
112 uart1: serial@4000 {
113 compatible = "ns16550a";
114 reg = <0x4000 0x8>;
115 clocks = <&clkc LS1X_CLKID_APB>;
116 interrupt-parent = <&intc0>;
117 status = "disabled";
118 };
119
120 uart2: serial@8000 {
121 compatible = "ns16550a";
122 reg = <0x8000 0x8>;
123 clocks = <&clkc LS1X_CLKID_APB>;
124 interrupt-parent = <&intc0>;
125 status = "disabled";
126 };
127
128 uart3: serial@c000 {
129 compatible = "ns16550a";
130 reg = <0xc000 0x8>;
131 clocks = <&clkc LS1X_CLKID_APB>;
132 interrupt-parent = <&intc0>;
133 status = "disabled";
134 };
135 };
136 };