Debian Codegraph @

arch/mips/boot/dts/econet/en751221.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2 /dts-v1/;
3
4 / {
5 compatible = "econet,en751221";
6 #address-cells = <1>;
7 #size-cells = <1>;
8
9 hpt_clock: clock {
10 compatible = "fixed-clock";
11 #clock-cells = <0>;
12 clock-frequency = <200000000>; /* 200 MHz */
13 };
14
15 cpus: cpus {
16 #address-cells = <1>;
17 #size-cells = <0>;
18
19 cpu@0 {
20 device_type = "cpu";
21 compatible = "mips,mips34Kc";
22 reg = <0>;
23 };
24 };
25
26 cpuintc: interrupt-controller {
27 compatible = "mti,cpu-interrupt-controller";
28 interrupt-controller;
29 #address-cells = <0>;
30 #interrupt-cells = <1>;
31 };
32
33 intc: interrupt-controller@1fb40000 {
34 compatible = "econet,en751221-intc";
35 reg = <0x1fb40000 0x100>;
36 interrupt-parent = <&cpuintc>;
37 interrupts = <2>;
38
39 interrupt-controller;
40 #interrupt-cells = <1>;
41 econet,shadow-interrupts = <7 2>, <8 3>, <13 12>, <30 29>;
42 };
43
44 uart: serial@1fbf0000 {
45 compatible = "ns16550";
46 reg = <0x1fbf0000 0x30>;
47 reg-io-width = <4>;
48 reg-shift = <2>;
49 interrupt-parent = <&intc>;
50 interrupts = <0>;
51 /*
52 * Conversion of baud rate to clock frequency requires a
53 * computation that is not in the ns16550 driver, so this
54 * uart is fixed at 115200 baud.
55 */
56 clock-frequency = <1843200>;
57 };
58
59 timer_hpt: timer@1fbf0400 {
60 compatible = "econet,en751221-timer";
61 reg = <0x1fbf0400 0x100>;
62
63 interrupt-parent = <&intc>;
64 interrupts = <30>;
65 clocks = <&hpt_clock>;
66 };
67 };