| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Suspend/resume support. Currently supporting Armada XP only. |
| 4 |
* |
| 5 |
* Copyright (C) 2014 Marvell |
| 6 |
* |
| 7 |
* Thomas Petazzoni <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
#include <linux/cpu_pm.h> |
| 11 |
#include <linux/delay.h> |
| 12 |
#include <linux/gpio.h> |
| 13 |
#include <linux/io.h> |
| 14 |
#include <linux/kernel.h> |
| 15 |
#include <linux/mbus.h> |
| 16 |
#include <linux/of_address.h> |
| 17 |
#include <linux/suspend.h> |
| 18 |
#include <asm/cacheflush.h> |
| 19 |
#include <asm/outercache.h> |
| 20 |
#include <asm/suspend.h> |
| 21 |
|
| 22 |
#include "coherency.h" |
| 23 |
#include "common.h" |
| 24 |
#include "pmsu.h" |
| 25 |
|
| 26 |
#define SDRAM_CONFIG_OFFS 0x0 |
| 27 |
#define SDRAM_CONFIG_SR_MODE_BIT BIT(24) |
| 28 |
#define SDRAM_OPERATION_OFFS 0x18 |
| 29 |
#define SDRAM_OPERATION_SELF_REFRESH 0x7 |
| 30 |
#define SDRAM_DLB_EVICTION_OFFS 0x30c |
| 31 |
#define SDRAM_DLB_EVICTION_THRESHOLD_MASK 0xff |
| 32 |
|
| 33 |
static void (*mvebu_board_pm_enter)(void __iomem *sdram_reg, u32 srcmd); |
| 34 |
static void __iomem *sdram_ctrl; |
| 35 |
|
| 36 |
static int mvebu_pm_powerdown(unsigned long data) |
| 37 |
{ |
| 38 |
u32 reg, srcmd; |
| 39 |
|
| 40 |
flush_cache_all(); |
| 41 |
outer_flush_all(); |
| 42 |
|
| 43 |
/* |
| 44 |
* Issue a Data Synchronization Barrier instruction to ensure |
| 45 |
* that all state saving has been completed. |
| 46 |
*/ |
| 47 |
dsb(); |
| 48 |
|
| 49 |
/* Flush the DLB and wait ~7 usec */ |
| 50 |
reg = readl(sdram_ctrl + SDRAM_DLB_EVICTION_OFFS); |
| 51 |
reg &= ~SDRAM_DLB_EVICTION_THRESHOLD_MASK; |
| 52 |
writel(reg, sdram_ctrl + SDRAM_DLB_EVICTION_OFFS); |
| 53 |
|
| 54 |
udelay(7); |
| 55 |
|
| 56 |
/* Set DRAM in battery backup mode */ |
| 57 |
reg = readl(sdram_ctrl + SDRAM_CONFIG_OFFS); |
| 58 |
reg &= ~SDRAM_CONFIG_SR_MODE_BIT; |
| 59 |
writel(reg, sdram_ctrl + SDRAM_CONFIG_OFFS); |
| 60 |
|
| 61 |
/* Prepare to go to self-refresh */ |
| 62 |
|
| 63 |
srcmd = readl(sdram_ctrl + SDRAM_OPERATION_OFFS); |
| 64 |
srcmd &= ~0x1F; |
| 65 |
srcmd |= SDRAM_OPERATION_SELF_REFRESH; |
| 66 |
|
| 67 |
mvebu_board_pm_enter(sdram_ctrl + SDRAM_OPERATION_OFFS, srcmd); |
| 68 |
|
| 69 |
return 0; |
| 70 |
} |
| 71 |
|
| 72 |
#define BOOT_INFO_ADDR 0x3000 |
| 73 |
#define BOOT_MAGIC_WORD 0xdeadb002 |
| 74 |
#define BOOT_MAGIC_LIST_END 0xffffffff |
| 75 |
|
| 76 |
/* |
| 77 |
* Those registers are accessed before switching the internal register |
| 78 |
* base, which is why we hardcode the 0xd0000000 base address, the one |
| 79 |
* used by the SoC out of reset. |
| 80 |
*/ |
| 81 |
#define MBUS_WINDOW_12_CTRL 0xd00200b0 |
| 82 |
#define MBUS_INTERNAL_REG_ADDRESS 0xd0020080 |
| 83 |
|
| 84 |
#define SDRAM_WIN_BASE_REG(x) (0x20180 + (0x8*x)) |
| 85 |
#define SDRAM_WIN_CTRL_REG(x) (0x20184 + (0x8*x)) |
| 86 |
|
| 87 |
static phys_addr_t mvebu_internal_reg_base(void) |
| 88 |
{ |
| 89 |
struct device_node *np; |
| 90 |
__be32 in_addr[2]; |
| 91 |
|
| 92 |
np = of_find_node_by_name(NULL, "internal-regs"); |
| 93 |
BUG_ON(!np); |
| 94 |
|
| 95 |
/* |
| 96 |
* Ask the DT what is the internal register address on this |
| 97 |
* platform. In the mvebu-mbus DT binding, 0xf0010000 |
| 98 |
* corresponds to the internal register window. |
| 99 |
*/ |
| 100 |
in_addr[0] = cpu_to_be32(0xf0010000); |
| 101 |
in_addr[1] = 0x0; |
| 102 |
|
| 103 |
return of_translate_address(np, in_addr); |
| 104 |
} |
| 105 |
|
| 106 |
static void mvebu_pm_store_armadaxp_bootinfo(u32 *store_addr) |
| 107 |
{ |
| 108 |
phys_addr_t resume_pc; |
| 109 |
|
| 110 |
resume_pc = __pa_symbol(armada_370_xp_cpu_resume); |
| 111 |
|
| 112 |
/* |
| 113 |
* The bootloader expects the first two words to be a magic |
| 114 |
* value (BOOT_MAGIC_WORD), followed by the address of the |
| 115 |
* resume code to jump to. Then, it expects a sequence of |
| 116 |
* (address, value) pairs, which can be used to restore the |
| 117 |
* value of certain registers. This sequence must end with the |
| 118 |
* BOOT_MAGIC_LIST_END magic value. |
| 119 |
*/ |
| 120 |
|
| 121 |
writel(BOOT_MAGIC_WORD, store_addr++); |
| 122 |
writel(resume_pc, store_addr++); |
| 123 |
|
| 124 |
/* |
| 125 |
* Some platforms remap their internal register base address |
| 126 |
* to 0xf1000000. However, out of reset, window 12 starts at |
| 127 |
* 0xf0000000 and ends at 0xf7ffffff, which would overlap with |
| 128 |
* the internal registers. Therefore, disable window 12. |
| 129 |
*/ |
| 130 |
writel(MBUS_WINDOW_12_CTRL, store_addr++); |
| 131 |
writel(0x0, store_addr++); |
| 132 |
|
| 133 |
/* |
| 134 |
* Set the internal register base address to the value |
| 135 |
* expected by Linux, as read from the Device Tree. |
| 136 |
*/ |
| 137 |
writel(MBUS_INTERNAL_REG_ADDRESS, store_addr++); |
| 138 |
writel(mvebu_internal_reg_base(), store_addr++); |
| 139 |
|
| 140 |
/* |
| 141 |
* Ask the mvebu-mbus driver to store the SDRAM window |
| 142 |
* configuration, which has to be restored by the bootloader |
| 143 |
* before re-entering the kernel on resume. |
| 144 |
*/ |
| 145 |
store_addr += mvebu_mbus_save_cpu_target(store_addr); |
| 146 |
|
| 147 |
writel(BOOT_MAGIC_LIST_END, store_addr); |
| 148 |
} |
| 149 |
|
| 150 |
static int mvebu_pm_store_bootinfo(void) |
| 151 |
{ |
| 152 |
u32 *store_addr; |
| 153 |
|
| 154 |
store_addr = phys_to_virt(BOOT_INFO_ADDR); |
| 155 |
|
| 156 |
if (of_machine_is_compatible("marvell,armadaxp")) |
| 157 |
mvebu_pm_store_armadaxp_bootinfo(store_addr); |
| 158 |
else |
| 159 |
return -ENODEV; |
| 160 |
|
| 161 |
return 0; |
| 162 |
} |
| 163 |
|
| 164 |
static int mvebu_enter_suspend(void) |
| 165 |
{ |
| 166 |
int ret; |
| 167 |
|
| 168 |
ret = mvebu_pm_store_bootinfo(); |
| 169 |
if (ret) |
| 170 |
return ret; |
| 171 |
|
| 172 |
cpu_pm_enter(); |
| 173 |
|
| 174 |
cpu_suspend(0, mvebu_pm_powerdown); |
| 175 |
|
| 176 |
outer_resume(); |
| 177 |
|
| 178 |
mvebu_v7_pmsu_idle_exit(); |
| 179 |
|
| 180 |
set_cpu_coherent(); |
| 181 |
|
| 182 |
cpu_pm_exit(); |
| 183 |
return 0; |
| 184 |
} |
| 185 |
|
| 186 |
static int mvebu_pm_enter(suspend_state_t state) |
| 187 |
{ |
| 188 |
switch (state) { |
| 189 |
case PM_SUSPEND_STANDBY: |
| 190 |
cpu_do_idle(); |
| 191 |
break; |
| 192 |
case PM_SUSPEND_MEM: |
| 193 |
pr_warn("Entering suspend to RAM. Only special wake-up sources will resume the system\n"); |
| 194 |
return mvebu_enter_suspend(); |
| 195 |
default: |
| 196 |
return -EINVAL; |
| 197 |
} |
| 198 |
return 0; |
| 199 |
} |
| 200 |
|
| 201 |
static int mvebu_pm_valid(suspend_state_t state) |
| 202 |
{ |
| 203 |
if (state == PM_SUSPEND_STANDBY) |
| 204 |
return 1; |
| 205 |
|
| 206 |
if (state == PM_SUSPEND_MEM && mvebu_board_pm_enter != NULL) |
| 207 |
return 1; |
| 208 |
|
| 209 |
return 0; |
| 210 |
} |
| 211 |
|
| 212 |
static const struct platform_suspend_ops mvebu_pm_ops = { |
| 213 |
.enter = mvebu_pm_enter, |
| 214 |
.valid = mvebu_pm_valid, |
| 215 |
}; |
| 216 |
|
| 217 |
static int __init mvebu_pm_init(void) |
| 218 |
{ |
| 219 |
if (!of_machine_is_compatible("marvell,armadaxp") && |
| 220 |
!of_machine_is_compatible("marvell,armada370") && |
| 221 |
!of_machine_is_compatible("marvell,armada380") && |
| 222 |
!of_machine_is_compatible("marvell,armada390")) |
| 223 |
return -ENODEV; |
| 224 |
|
| 225 |
suspend_set_ops(&mvebu_pm_ops); |
| 226 |
|
| 227 |
return 0; |
| 228 |
} |
| 229 |
|
| 230 |
|
| 231 |
late_initcall(mvebu_pm_init); |
| 232 |
|
| 233 |
int __init mvebu_pm_suspend_init(void (*board_pm_enter)(void __iomem *sdram_reg, |
| 234 |
u32 srcmd)) |
| 235 |
{ |
| 236 |
struct device_node *np; |
| 237 |
struct resource res; |
| 238 |
|
| 239 |
np = of_find_compatible_node(NULL, NULL, |
| 240 |
"marvell,armada-xp-sdram-controller"); |
| 241 |
if (!np) |
| 242 |
return -ENODEV; |
| 243 |
|
| 244 |
if (of_address_to_resource(np, 0, &res)) { |
| 245 |
of_node_put(np); |
| 246 |
return -ENODEV; |
| 247 |
} |
| 248 |
|
| 249 |
if (!request_mem_region(res.start, resource_size(&res), |
| 250 |
np->full_name)) { |
| 251 |
of_node_put(np); |
| 252 |
return -EBUSY; |
| 253 |
} |
| 254 |
|
| 255 |
sdram_ctrl = ioremap(res.start, resource_size(&res)); |
| 256 |
if (!sdram_ctrl) { |
| 257 |
release_mem_region(res.start, resource_size(&res)); |
| 258 |
of_node_put(np); |
| 259 |
return -ENOMEM; |
| 260 |
} |
| 261 |
|
| 262 |
of_node_put(np); |
| 263 |
|
| 264 |
mvebu_board_pm_enter = board_pm_enter; |
| 265 |
|
| 266 |
return 0; |
| 267 |
} |