| 1 |
/* SPDX-License-Identifier: GPL-2.0 */ |
| 2 |
/* |
| 3 |
* arch/arm/include/asm/hardware/sa1111.h |
| 4 |
* |
| 5 |
* Copyright (C) 2000 John G Dorsey <[email protected]> |
| 6 |
* |
| 7 |
* This file contains definitions for the SA-1111 Companion Chip. |
| 8 |
* (Structure and naming borrowed from SA-1101.h, by Peter Danielsson.) |
| 9 |
* |
| 10 |
* Macro that calculates real address for registers in the SA-1111 |
| 11 |
*/ |
| 12 |
|
| 13 |
#ifndef _ASM_ARCH_SA1111 |
| 14 |
#define _ASM_ARCH_SA1111 |
| 15 |
|
| 16 |
/* |
| 17 |
* Don't ask the (SAC) DMA engines to move less than this amount. |
| 18 |
*/ |
| 19 |
|
| 20 |
#define SA1111_SAC_DMA_MIN_XFER (0x800) |
| 21 |
|
| 22 |
/* |
| 23 |
* System Bus Interface (SBI) |
| 24 |
* |
| 25 |
* Registers |
| 26 |
* SKCR Control Register |
| 27 |
* SMCR Shared Memory Controller Register |
| 28 |
* SKID ID Register |
| 29 |
*/ |
| 30 |
#define SA1111_SKCR 0x0000 |
| 31 |
#define SA1111_SMCR 0x0004 |
| 32 |
#define SA1111_SKID 0x0008 |
| 33 |
|
| 34 |
#define SKCR_PLL_BYPASS (1<<0) |
| 35 |
#define SKCR_RCLKEN (1<<1) |
| 36 |
#define SKCR_SLEEP (1<<2) |
| 37 |
#define SKCR_DOZE (1<<3) |
| 38 |
#define SKCR_VCO_OFF (1<<4) |
| 39 |
#define SKCR_SCANTSTEN (1<<5) |
| 40 |
#define SKCR_CLKTSTEN (1<<6) |
| 41 |
#define SKCR_RDYEN (1<<7) |
| 42 |
#define SKCR_SELAC (1<<8) |
| 43 |
#define SKCR_OPPC (1<<9) |
| 44 |
#define SKCR_PLLTSTEN (1<<10) |
| 45 |
#define SKCR_USBIOTSTEN (1<<11) |
| 46 |
/* |
| 47 |
* Don't believe the specs! Take them, throw them outside. Leave them |
| 48 |
* there for a week. Spit on them. Walk on them. Stamp on them. |
| 49 |
* Pour gasoline over them and finally burn them. Now think about coding. |
| 50 |
* - The October 1999 errata (278260-007) says its bit 13, 1 to enable. |
| 51 |
* - The Feb 2001 errata (278260-010) says that the previous errata |
| 52 |
* (278260-009) is wrong, and its bit actually 12, fixed in spec |
| 53 |
* 278242-003. |
| 54 |
* - The SA1111 manual (278242) says bit 12, but 0 to enable. |
| 55 |
* - Reality is bit 13, 1 to enable. |
| 56 |
* -- rmk |
| 57 |
*/ |
| 58 |
#define SKCR_OE_EN (1<<13) |
| 59 |
|
| 60 |
#define SMCR_DTIM (1<<0) |
| 61 |
#define SMCR_MBGE (1<<1) |
| 62 |
#define SMCR_DRAC_0 (1<<2) |
| 63 |
#define SMCR_DRAC_1 (1<<3) |
| 64 |
#define SMCR_DRAC_2 (1<<4) |
| 65 |
#define SMCR_DRAC Fld(3, 2) |
| 66 |
#define SMCR_CLAT (1<<5) |
| 67 |
|
| 68 |
#define SKID_SIREV_MASK (0x000000f0) |
| 69 |
#define SKID_MTREV_MASK (0x0000000f) |
| 70 |
#define SKID_ID_MASK (0xffffff00) |
| 71 |
#define SKID_SA1111_ID (0x690cc200) |
| 72 |
|
| 73 |
/* |
| 74 |
* System Controller |
| 75 |
* |
| 76 |
* Registers |
| 77 |
* SKPCR Power Control Register |
| 78 |
* SKCDR Clock Divider Register |
| 79 |
* SKAUD Audio Clock Divider Register |
| 80 |
* SKPMC PS/2 Mouse Clock Divider Register |
| 81 |
* SKPTC PS/2 Track Pad Clock Divider Register |
| 82 |
* SKPEN0 PWM0 Enable Register |
| 83 |
* SKPWM0 PWM0 Clock Register |
| 84 |
* SKPEN1 PWM1 Enable Register |
| 85 |
* SKPWM1 PWM1 Clock Register |
| 86 |
*/ |
| 87 |
#define SA1111_SKPCR 0x0200 |
| 88 |
#define SA1111_SKCDR 0x0204 |
| 89 |
#define SA1111_SKAUD 0x0208 |
| 90 |
#define SA1111_SKPMC 0x020c |
| 91 |
#define SA1111_SKPTC 0x0210 |
| 92 |
#define SA1111_SKPEN0 0x0214 |
| 93 |
#define SA1111_SKPWM0 0x0218 |
| 94 |
#define SA1111_SKPEN1 0x021c |
| 95 |
#define SA1111_SKPWM1 0x0220 |
| 96 |
|
| 97 |
#define SKPCR_UCLKEN (1<<0) |
| 98 |
#define SKPCR_ACCLKEN (1<<1) |
| 99 |
#define SKPCR_I2SCLKEN (1<<2) |
| 100 |
#define SKPCR_L3CLKEN (1<<3) |
| 101 |
#define SKPCR_SCLKEN (1<<4) |
| 102 |
#define SKPCR_PMCLKEN (1<<5) |
| 103 |
#define SKPCR_PTCLKEN (1<<6) |
| 104 |
#define SKPCR_DCLKEN (1<<7) |
| 105 |
#define SKPCR_PWMCLKEN (1<<8) |
| 106 |
|
| 107 |
/* USB Host controller */ |
| 108 |
#define SA1111_USB 0x0400 |
| 109 |
|
| 110 |
/* |
| 111 |
* Serial Audio Controller |
| 112 |
* |
| 113 |
* Registers |
| 114 |
* SACR0 Serial Audio Common Control Register |
| 115 |
* SACR1 Serial Audio Alternate Mode (I2C/MSB) Control Register |
| 116 |
* SACR2 Serial Audio AC-link Control Register |
| 117 |
* SASR0 Serial Audio I2S/MSB Interface & FIFO Status Register |
| 118 |
* SASR1 Serial Audio AC-link Interface & FIFO Status Register |
| 119 |
* SASCR Serial Audio Status Clear Register |
| 120 |
* L3_CAR L3 Control Bus Address Register |
| 121 |
* L3_CDR L3 Control Bus Data Register |
| 122 |
* ACCAR AC-link Command Address Register |
| 123 |
* ACCDR AC-link Command Data Register |
| 124 |
* ACSAR AC-link Status Address Register |
| 125 |
* ACSDR AC-link Status Data Register |
| 126 |
* SADTCS Serial Audio DMA Transmit Control/Status Register |
| 127 |
* SADTSA Serial Audio DMA Transmit Buffer Start Address A |
| 128 |
* SADTCA Serial Audio DMA Transmit Buffer Count Register A |
| 129 |
* SADTSB Serial Audio DMA Transmit Buffer Start Address B |
| 130 |
* SADTCB Serial Audio DMA Transmit Buffer Count Register B |
| 131 |
* SADRCS Serial Audio DMA Receive Control/Status Register |
| 132 |
* SADRSA Serial Audio DMA Receive Buffer Start Address A |
| 133 |
* SADRCA Serial Audio DMA Receive Buffer Count Register A |
| 134 |
* SADRSB Serial Audio DMA Receive Buffer Start Address B |
| 135 |
* SADRCB Serial Audio DMA Receive Buffer Count Register B |
| 136 |
* SAITR Serial Audio Interrupt Test Register |
| 137 |
* SADR Serial Audio Data Register (16 x 32-bit) |
| 138 |
*/ |
| 139 |
|
| 140 |
#define SA1111_SERAUDIO 0x0600 |
| 141 |
|
| 142 |
/* |
| 143 |
* These are offsets from the above base. |
| 144 |
*/ |
| 145 |
#define SA1111_SACR0 0x00 |
| 146 |
#define SA1111_SACR1 0x04 |
| 147 |
#define SA1111_SACR2 0x08 |
| 148 |
#define SA1111_SASR0 0x0c |
| 149 |
#define SA1111_SASR1 0x10 |
| 150 |
#define SA1111_SASCR 0x18 |
| 151 |
#define SA1111_L3_CAR 0x1c |
| 152 |
#define SA1111_L3_CDR 0x20 |
| 153 |
#define SA1111_ACCAR 0x24 |
| 154 |
#define SA1111_ACCDR 0x28 |
| 155 |
#define SA1111_ACSAR 0x2c |
| 156 |
#define SA1111_ACSDR 0x30 |
| 157 |
#define SA1111_SADTCS 0x34 |
| 158 |
#define SA1111_SADTSA 0x38 |
| 159 |
#define SA1111_SADTCA 0x3c |
| 160 |
#define SA1111_SADTSB 0x40 |
| 161 |
#define SA1111_SADTCB 0x44 |
| 162 |
#define SA1111_SADRCS 0x48 |
| 163 |
#define SA1111_SADRSA 0x4c |
| 164 |
#define SA1111_SADRCA 0x50 |
| 165 |
#define SA1111_SADRSB 0x54 |
| 166 |
#define SA1111_SADRCB 0x58 |
| 167 |
#define SA1111_SAITR 0x5c |
| 168 |
#define SA1111_SADR 0x80 |
| 169 |
|
| 170 |
#ifndef CONFIG_ARCH_PXA |
| 171 |
|
| 172 |
#define SACR0_ENB (1<<0) |
| 173 |
#define SACR0_BCKD (1<<2) |
| 174 |
#define SACR0_RST (1<<3) |
| 175 |
|
| 176 |
#define SACR1_AMSL (1<<0) |
| 177 |
#define SACR1_L3EN (1<<1) |
| 178 |
#define SACR1_L3MB (1<<2) |
| 179 |
#define SACR1_DREC (1<<3) |
| 180 |
#define SACR1_DRPL (1<<4) |
| 181 |
#define SACR1_ENLBF (1<<5) |
| 182 |
|
| 183 |
#define SACR2_TS3V (1<<0) |
| 184 |
#define SACR2_TS4V (1<<1) |
| 185 |
#define SACR2_WKUP (1<<2) |
| 186 |
#define SACR2_DREC (1<<3) |
| 187 |
#define SACR2_DRPL (1<<4) |
| 188 |
#define SACR2_ENLBF (1<<5) |
| 189 |
#define SACR2_RESET (1<<6) |
| 190 |
|
| 191 |
#define SASR0_TNF (1<<0) |
| 192 |
#define SASR0_RNE (1<<1) |
| 193 |
#define SASR0_BSY (1<<2) |
| 194 |
#define SASR0_TFS (1<<3) |
| 195 |
#define SASR0_RFS (1<<4) |
| 196 |
#define SASR0_TUR (1<<5) |
| 197 |
#define SASR0_ROR (1<<6) |
| 198 |
#define SASR0_L3WD (1<<16) |
| 199 |
#define SASR0_L3RD (1<<17) |
| 200 |
|
| 201 |
#define SASR1_TNF (1<<0) |
| 202 |
#define SASR1_RNE (1<<1) |
| 203 |
#define SASR1_BSY (1<<2) |
| 204 |
#define SASR1_TFS (1<<3) |
| 205 |
#define SASR1_RFS (1<<4) |
| 206 |
#define SASR1_TUR (1<<5) |
| 207 |
#define SASR1_ROR (1<<6) |
| 208 |
#define SASR1_CADT (1<<16) |
| 209 |
#define SASR1_SADR (1<<17) |
| 210 |
#define SASR1_RSTO (1<<18) |
| 211 |
#define SASR1_CLPM (1<<19) |
| 212 |
#define SASR1_CRDY (1<<20) |
| 213 |
#define SASR1_RS3V (1<<21) |
| 214 |
#define SASR1_RS4V (1<<22) |
| 215 |
|
| 216 |
#define SASCR_TUR (1<<5) |
| 217 |
#define SASCR_ROR (1<<6) |
| 218 |
#define SASCR_DTS (1<<16) |
| 219 |
#define SASCR_RDD (1<<17) |
| 220 |
#define SASCR_STO (1<<18) |
| 221 |
|
| 222 |
#define SADTCS_TDEN (1<<0) |
| 223 |
#define SADTCS_TDIE (1<<1) |
| 224 |
#define SADTCS_TDBDA (1<<3) |
| 225 |
#define SADTCS_TDSTA (1<<4) |
| 226 |
#define SADTCS_TDBDB (1<<5) |
| 227 |
#define SADTCS_TDSTB (1<<6) |
| 228 |
#define SADTCS_TBIU (1<<7) |
| 229 |
|
| 230 |
#define SADRCS_RDEN (1<<0) |
| 231 |
#define SADRCS_RDIE (1<<1) |
| 232 |
#define SADRCS_RDBDA (1<<3) |
| 233 |
#define SADRCS_RDSTA (1<<4) |
| 234 |
#define SADRCS_RDBDB (1<<5) |
| 235 |
#define SADRCS_RDSTB (1<<6) |
| 236 |
#define SADRCS_RBIU (1<<7) |
| 237 |
|
| 238 |
#define SAD_CS_DEN (1<<0) |
| 239 |
#define SAD_CS_DIE (1<<1) /* Not functional on metal 1 */ |
| 240 |
#define SAD_CS_DBDA (1<<3) /* Not functional on metal 1 */ |
| 241 |
#define SAD_CS_DSTA (1<<4) |
| 242 |
#define SAD_CS_DBDB (1<<5) /* Not functional on metal 1 */ |
| 243 |
#define SAD_CS_DSTB (1<<6) |
| 244 |
#define SAD_CS_BIU (1<<7) /* Not functional on metal 1 */ |
| 245 |
|
| 246 |
#define SAITR_TFS (1<<0) |
| 247 |
#define SAITR_RFS (1<<1) |
| 248 |
#define SAITR_TUR (1<<2) |
| 249 |
#define SAITR_ROR (1<<3) |
| 250 |
#define SAITR_CADT (1<<4) |
| 251 |
#define SAITR_SADR (1<<5) |
| 252 |
#define SAITR_RSTO (1<<6) |
| 253 |
#define SAITR_TDBDA (1<<8) |
| 254 |
#define SAITR_TDBDB (1<<9) |
| 255 |
#define SAITR_RDBDA (1<<10) |
| 256 |
#define SAITR_RDBDB (1<<11) |
| 257 |
|
| 258 |
#endif /* !CONFIG_ARCH_PXA */ |
| 259 |
|
| 260 |
/* |
| 261 |
* General-Purpose I/O Interface |
| 262 |
* |
| 263 |
* Registers |
| 264 |
* PA_DDR GPIO Block A Data Direction |
| 265 |
* PA_DRR/PA_DWR GPIO Block A Data Value Register (read/write) |
| 266 |
* PA_SDR GPIO Block A Sleep Direction |
| 267 |
* PA_SSR GPIO Block A Sleep State |
| 268 |
* PB_DDR GPIO Block B Data Direction |
| 269 |
* PB_DRR/PB_DWR GPIO Block B Data Value Register (read/write) |
| 270 |
* PB_SDR GPIO Block B Sleep Direction |
| 271 |
* PB_SSR GPIO Block B Sleep State |
| 272 |
* PC_DDR GPIO Block C Data Direction |
| 273 |
* PC_DRR/PC_DWR GPIO Block C Data Value Register (read/write) |
| 274 |
* PC_SDR GPIO Block C Sleep Direction |
| 275 |
* PC_SSR GPIO Block C Sleep State |
| 276 |
*/ |
| 277 |
|
| 278 |
#define SA1111_GPIO 0x1000 |
| 279 |
|
| 280 |
#define SA1111_GPIO_PADDR (0x000) |
| 281 |
#define SA1111_GPIO_PADRR (0x004) |
| 282 |
#define SA1111_GPIO_PADWR (0x004) |
| 283 |
#define SA1111_GPIO_PASDR (0x008) |
| 284 |
#define SA1111_GPIO_PASSR (0x00c) |
| 285 |
#define SA1111_GPIO_PBDDR (0x010) |
| 286 |
#define SA1111_GPIO_PBDRR (0x014) |
| 287 |
#define SA1111_GPIO_PBDWR (0x014) |
| 288 |
#define SA1111_GPIO_PBSDR (0x018) |
| 289 |
#define SA1111_GPIO_PBSSR (0x01c) |
| 290 |
#define SA1111_GPIO_PCDDR (0x020) |
| 291 |
#define SA1111_GPIO_PCDRR (0x024) |
| 292 |
#define SA1111_GPIO_PCDWR (0x024) |
| 293 |
#define SA1111_GPIO_PCSDR (0x028) |
| 294 |
#define SA1111_GPIO_PCSSR (0x02c) |
| 295 |
|
| 296 |
#define GPIO_A0 (1 << 0) |
| 297 |
#define GPIO_A1 (1 << 1) |
| 298 |
#define GPIO_A2 (1 << 2) |
| 299 |
#define GPIO_A3 (1 << 3) |
| 300 |
|
| 301 |
#define GPIO_B0 (1 << 8) |
| 302 |
#define GPIO_B1 (1 << 9) |
| 303 |
#define GPIO_B2 (1 << 10) |
| 304 |
#define GPIO_B3 (1 << 11) |
| 305 |
#define GPIO_B4 (1 << 12) |
| 306 |
#define GPIO_B5 (1 << 13) |
| 307 |
#define GPIO_B6 (1 << 14) |
| 308 |
#define GPIO_B7 (1 << 15) |
| 309 |
|
| 310 |
#define GPIO_C0 (1 << 16) |
| 311 |
#define GPIO_C1 (1 << 17) |
| 312 |
#define GPIO_C2 (1 << 18) |
| 313 |
#define GPIO_C3 (1 << 19) |
| 314 |
#define GPIO_C4 (1 << 20) |
| 315 |
#define GPIO_C5 (1 << 21) |
| 316 |
#define GPIO_C6 (1 << 22) |
| 317 |
#define GPIO_C7 (1 << 23) |
| 318 |
|
| 319 |
/* |
| 320 |
* Interrupt Controller |
| 321 |
* |
| 322 |
* Registers |
| 323 |
* INTTEST0 Test register 0 |
| 324 |
* INTTEST1 Test register 1 |
| 325 |
* INTEN0 Interrupt Enable register 0 |
| 326 |
* INTEN1 Interrupt Enable register 1 |
| 327 |
* INTPOL0 Interrupt Polarity selection 0 |
| 328 |
* INTPOL1 Interrupt Polarity selection 1 |
| 329 |
* INTTSTSEL Interrupt source selection |
| 330 |
* INTSTATCLR0 Interrupt Status/Clear 0 |
| 331 |
* INTSTATCLR1 Interrupt Status/Clear 1 |
| 332 |
* INTSET0 Interrupt source set 0 |
| 333 |
* INTSET1 Interrupt source set 1 |
| 334 |
* WAKE_EN0 Wake-up source enable 0 |
| 335 |
* WAKE_EN1 Wake-up source enable 1 |
| 336 |
* WAKE_POL0 Wake-up polarity selection 0 |
| 337 |
* WAKE_POL1 Wake-up polarity selection 1 |
| 338 |
*/ |
| 339 |
#define SA1111_INTC 0x1600 |
| 340 |
|
| 341 |
/* |
| 342 |
* These are offsets from the above base. |
| 343 |
*/ |
| 344 |
#define SA1111_INTTEST0 0x0000 |
| 345 |
#define SA1111_INTTEST1 0x0004 |
| 346 |
#define SA1111_INTEN0 0x0008 |
| 347 |
#define SA1111_INTEN1 0x000c |
| 348 |
#define SA1111_INTPOL0 0x0010 |
| 349 |
#define SA1111_INTPOL1 0x0014 |
| 350 |
#define SA1111_INTTSTSEL 0x0018 |
| 351 |
#define SA1111_INTSTATCLR0 0x001c |
| 352 |
#define SA1111_INTSTATCLR1 0x0020 |
| 353 |
#define SA1111_INTSET0 0x0024 |
| 354 |
#define SA1111_INTSET1 0x0028 |
| 355 |
#define SA1111_WAKEEN0 0x002c |
| 356 |
#define SA1111_WAKEEN1 0x0030 |
| 357 |
#define SA1111_WAKEPOL0 0x0034 |
| 358 |
#define SA1111_WAKEPOL1 0x0038 |
| 359 |
|
| 360 |
/* PS/2 Trackpad and Mouse Interfaces */ |
| 361 |
#define SA1111_KBD 0x0a00 |
| 362 |
#define SA1111_MSE 0x0c00 |
| 363 |
|
| 364 |
/* PCMCIA Interface */ |
| 365 |
#define SA1111_PCMCIA 0x1600 |
| 366 |
|
| 367 |
|
| 368 |
|
| 369 |
|
| 370 |
|
| 371 |
extern const struct bus_type sa1111_bus_type; |
| 372 |
|
| 373 |
#define SA1111_DEVID_SBI (1 << 0) |
| 374 |
#define SA1111_DEVID_SK (1 << 1) |
| 375 |
#define SA1111_DEVID_USB (1 << 2) |
| 376 |
#define SA1111_DEVID_SAC (1 << 3) |
| 377 |
#define SA1111_DEVID_SSP (1 << 4) |
| 378 |
#define SA1111_DEVID_PS2 (3 << 5) |
| 379 |
#define SA1111_DEVID_PS2_KBD (1 << 5) |
| 380 |
#define SA1111_DEVID_PS2_MSE (1 << 6) |
| 381 |
#define SA1111_DEVID_GPIO (1 << 7) |
| 382 |
#define SA1111_DEVID_INT (1 << 8) |
| 383 |
#define SA1111_DEVID_PCMCIA (1 << 9) |
| 384 |
|
| 385 |
struct sa1111_dev { |
| 386 |
struct device dev; |
| 387 |
unsigned int devid; |
| 388 |
struct resource res; |
| 389 |
void __iomem *mapbase; |
| 390 |
unsigned int skpcr_mask; |
| 391 |
unsigned int hwirq[6]; |
| 392 |
u64 dma_mask; |
| 393 |
}; |
| 394 |
|
| 395 |
#define to_sa1111_device(x) container_of(x, struct sa1111_dev, dev) |
| 396 |
|
| 397 |
#define sa1111_get_drvdata(d) dev_get_drvdata(&(d)->dev) |
| 398 |
#define sa1111_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) |
| 399 |
|
| 400 |
struct sa1111_driver { |
| 401 |
struct device_driver drv; |
| 402 |
unsigned int devid; |
| 403 |
int (*probe)(struct sa1111_dev *); |
| 404 |
void (*remove)(struct sa1111_dev *); |
| 405 |
}; |
| 406 |
|
| 407 |
#define SA1111_DRV(_d) container_of_const((_d), struct sa1111_driver, drv) |
| 408 |
|
| 409 |
#define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name) |
| 410 |
|
| 411 |
/* |
| 412 |
* These frob the SKPCR register, and call platform specific |
| 413 |
* enable/disable functions. |
| 414 |
*/ |
| 415 |
int sa1111_enable_device(struct sa1111_dev *); |
| 416 |
void sa1111_disable_device(struct sa1111_dev *); |
| 417 |
|
| 418 |
int sa1111_get_irq(struct sa1111_dev *, unsigned num); |
| 419 |
|
| 420 |
unsigned int sa1111_pll_clock(struct sa1111_dev *); |
| 421 |
|
| 422 |
#define SA1111_AUDIO_ACLINK 0 |
| 423 |
#define SA1111_AUDIO_I2S 1 |
| 424 |
|
| 425 |
void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode); |
| 426 |
int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate); |
| 427 |
int sa1111_get_audio_rate(struct sa1111_dev *sadev); |
| 428 |
|
| 429 |
int sa1111_check_dma_bug(dma_addr_t addr); |
| 430 |
|
| 431 |
int sa1111_driver_register(struct sa1111_driver *); |
| 432 |
void sa1111_driver_unregister(struct sa1111_driver *); |
| 433 |
|
| 434 |
struct sa1111_platform_data { |
| 435 |
int irq_base; /* base for cascaded on-chip IRQs */ |
| 436 |
unsigned disable_devs; |
| 437 |
void *data; |
| 438 |
int (*enable)(void *, unsigned); |
| 439 |
void (*disable)(void *, unsigned); |
| 440 |
}; |
| 441 |
|
| 442 |
#endif /* _ASM_ARCH_SA1111 */ |