| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Keystone 2 Kepler/Hawking EVM device tree |
| 4 |
* |
| 5 |
* Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/ |
| 6 |
*/ |
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include "keystone.dtsi" |
| 10 |
#include "keystone-k2hk.dtsi" |
| 11 |
|
| 12 |
/ { |
| 13 |
compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"; |
| 14 |
model = "Texas Instruments Keystone 2 Kepler/Hawking EVM"; |
| 15 |
|
| 16 |
reserved-memory { |
| 17 |
#address-cells = <2>; |
| 18 |
#size-cells = <2>; |
| 19 |
ranges; |
| 20 |
|
| 21 |
dsp_common_memory: dsp-common-memory@81f800000 { |
| 22 |
compatible = "shared-dma-pool"; |
| 23 |
reg = <0x00000008 0x1f800000 0x00000000 0x800000>; |
| 24 |
reusable; |
| 25 |
status = "okay"; |
| 26 |
}; |
| 27 |
}; |
| 28 |
|
| 29 |
leds { |
| 30 |
compatible = "gpio-leds"; |
| 31 |
led-debug-1-1 { |
| 32 |
label = "keystone:green:debug1"; |
| 33 |
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */ |
| 34 |
}; |
| 35 |
|
| 36 |
led-debug-1-2 { |
| 37 |
label = "keystone:red:debug1"; |
| 38 |
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */ |
| 39 |
}; |
| 40 |
|
| 41 |
led-debug-2 { |
| 42 |
label = "keystone:blue:debug2"; |
| 43 |
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */ |
| 44 |
}; |
| 45 |
|
| 46 |
led-debug-3 { |
| 47 |
label = "keystone:blue:debug3"; |
| 48 |
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */ |
| 49 |
}; |
| 50 |
}; |
| 51 |
}; |
| 52 |
|
| 53 |
&soc0 { |
| 54 |
clocks { |
| 55 |
refclksys: refclksys { |
| 56 |
#clock-cells = <0>; |
| 57 |
compatible = "fixed-clock"; |
| 58 |
clock-frequency = <122880000>; |
| 59 |
clock-output-names = "refclk-sys"; |
| 60 |
}; |
| 61 |
|
| 62 |
refclkpass: refclkpass { |
| 63 |
#clock-cells = <0>; |
| 64 |
compatible = "fixed-clock"; |
| 65 |
clock-frequency = <122880000>; |
| 66 |
clock-output-names = "refclk-pass"; |
| 67 |
}; |
| 68 |
|
| 69 |
refclkarm: refclkarm { |
| 70 |
#clock-cells = <0>; |
| 71 |
compatible = "fixed-clock"; |
| 72 |
clock-frequency = <125000000>; |
| 73 |
clock-output-names = "refclk-arm"; |
| 74 |
}; |
| 75 |
|
| 76 |
refclkddr3a: refclkddr3a { |
| 77 |
#clock-cells = <0>; |
| 78 |
compatible = "fixed-clock"; |
| 79 |
clock-frequency = <100000000>; |
| 80 |
clock-output-names = "refclk-ddr3a"; |
| 81 |
}; |
| 82 |
|
| 83 |
refclkddr3b: refclkddr3b { |
| 84 |
#clock-cells = <0>; |
| 85 |
compatible = "fixed-clock"; |
| 86 |
clock-frequency = <100000000>; |
| 87 |
clock-output-names = "refclk-ddr3b"; |
| 88 |
}; |
| 89 |
}; |
| 90 |
}; |
| 91 |
|
| 92 |
&usb_phy { |
| 93 |
status = "okay"; |
| 94 |
}; |
| 95 |
|
| 96 |
&keystone_usb0 { |
| 97 |
status = "okay"; |
| 98 |
}; |
| 99 |
|
| 100 |
&usb0 { |
| 101 |
dr_mode = "host"; |
| 102 |
}; |
| 103 |
|
| 104 |
&aemif { |
| 105 |
cs0 { |
| 106 |
#address-cells = <2>; |
| 107 |
#size-cells = <1>; |
| 108 |
clock-ranges; |
| 109 |
ranges; |
| 110 |
|
| 111 |
ti,cs-chipselect = <0>; |
| 112 |
/* all timings in nanoseconds */ |
| 113 |
ti,cs-min-turnaround-ns = <12>; |
| 114 |
ti,cs-read-hold-ns = <6>; |
| 115 |
ti,cs-read-strobe-ns = <23>; |
| 116 |
ti,cs-read-setup-ns = <9>; |
| 117 |
ti,cs-write-hold-ns = <8>; |
| 118 |
ti,cs-write-strobe-ns = <23>; |
| 119 |
ti,cs-write-setup-ns = <8>; |
| 120 |
|
| 121 |
nand@0,0 { |
| 122 |
compatible = "ti,keystone-nand","ti,davinci-nand"; |
| 123 |
#address-cells = <1>; |
| 124 |
#size-cells = <1>; |
| 125 |
reg = <0 0 0x4000000 |
| 126 |
1 0 0x0000100>; |
| 127 |
|
| 128 |
ti,davinci-chipselect = <0>; |
| 129 |
ti,davinci-mask-ale = <0x2000>; |
| 130 |
ti,davinci-mask-cle = <0x4000>; |
| 131 |
ti,davinci-mask-chipsel = <0>; |
| 132 |
nand-ecc-mode = "hw"; |
| 133 |
ti,davinci-ecc-bits = <4>; |
| 134 |
nand-on-flash-bbt; |
| 135 |
|
| 136 |
partition@0 { |
| 137 |
label = "u-boot"; |
| 138 |
reg = <0x0 0x100000>; |
| 139 |
read-only; |
| 140 |
}; |
| 141 |
|
| 142 |
partition@100000 { |
| 143 |
label = "params"; |
| 144 |
reg = <0x100000 0x80000>; |
| 145 |
read-only; |
| 146 |
}; |
| 147 |
|
| 148 |
partition@180000 { |
| 149 |
label = "ubifs"; |
| 150 |
reg = <0x180000 0x1fe80000>; |
| 151 |
}; |
| 152 |
}; |
| 153 |
}; |
| 154 |
}; |
| 155 |
|
| 156 |
&i2c0 { |
| 157 |
eeprom@50 { |
| 158 |
compatible = "atmel,24c1024"; |
| 159 |
reg = <0x50>; |
| 160 |
}; |
| 161 |
}; |
| 162 |
|
| 163 |
&spi0 { |
| 164 |
nor_flash: flash@0 { |
| 165 |
#address-cells = <1>; |
| 166 |
#size-cells = <1>; |
| 167 |
compatible = "micron,n25q128a11", "jedec,spi-nor"; |
| 168 |
spi-max-frequency = <54000000>; |
| 169 |
m25p,fast-read; |
| 170 |
reg = <0>; |
| 171 |
|
| 172 |
partition@0 { |
| 173 |
label = "u-boot-spl"; |
| 174 |
reg = <0x0 0x80000>; |
| 175 |
read-only; |
| 176 |
}; |
| 177 |
|
| 178 |
partition@1 { |
| 179 |
label = "misc"; |
| 180 |
reg = <0x80000 0xf80000>; |
| 181 |
}; |
| 182 |
}; |
| 183 |
}; |
| 184 |
|
| 185 |
&mdio { |
| 186 |
status = "okay"; |
| 187 |
ethphy0: ethernet-phy@0 { |
| 188 |
compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; |
| 189 |
reg = <0>; |
| 190 |
}; |
| 191 |
|
| 192 |
ethphy1: ethernet-phy@1 { |
| 193 |
compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; |
| 194 |
reg = <1>; |
| 195 |
}; |
| 196 |
}; |
| 197 |
|
| 198 |
&dsp0 { |
| 199 |
memory-region = <&dsp_common_memory>; |
| 200 |
status = "okay"; |
| 201 |
}; |
| 202 |
|
| 203 |
&dsp1 { |
| 204 |
memory-region = <&dsp_common_memory>; |
| 205 |
status = "okay"; |
| 206 |
}; |
| 207 |
|
| 208 |
&dsp2 { |
| 209 |
memory-region = <&dsp_common_memory>; |
| 210 |
status = "okay"; |
| 211 |
}; |
| 212 |
|
| 213 |
&dsp3 { |
| 214 |
memory-region = <&dsp_common_memory>; |
| 215 |
status = "okay"; |
| 216 |
}; |
| 217 |
|
| 218 |
&dsp4 { |
| 219 |
memory-region = <&dsp_common_memory>; |
| 220 |
status = "okay"; |
| 221 |
}; |
| 222 |
|
| 223 |
&dsp5 { |
| 224 |
memory-region = <&dsp_common_memory>; |
| 225 |
status = "okay"; |
| 226 |
}; |
| 227 |
|
| 228 |
&dsp6 { |
| 229 |
memory-region = <&dsp_common_memory>; |
| 230 |
status = "okay"; |
| 231 |
}; |
| 232 |
|
| 233 |
&dsp7 { |
| 234 |
memory-region = <&dsp_common_memory>; |
| 235 |
status = "okay"; |
| 236 |
}; |