| 1 |
/* |
| 2 |
* Device Tree Source for the Axis ARTPEC-6 SoC |
| 3 |
* |
| 4 |
* This file is dual-licensed: you can use it either under the terms |
| 5 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 6 |
* licensing only applies to this file, and not this project as a |
| 7 |
* whole. |
| 8 |
* |
| 9 |
* a) This file is free software; you can redistribute it and/or |
| 10 |
* modify it under the terms of the GNU General Public License as |
| 11 |
* published by the Free Software Foundation; either version 2 of the |
| 12 |
* License, or (at your option) any later version. |
| 13 |
* |
| 14 |
* This file is distributed in the hope that it will be useful, |
| 15 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 |
* GNU General Public License for more details. |
| 18 |
* |
| 19 |
* Or, alternatively, |
| 20 |
* |
| 21 |
* b) Permission is hereby granted, free of charge, to any person |
| 22 |
* obtaining a copy of this software and associated documentation |
| 23 |
* files (the "Software"), to deal in the Software without |
| 24 |
* restriction, including without limitation the rights to use, |
| 25 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 26 |
* sell copies of the Software, and to permit persons to whom the |
| 27 |
* Software is furnished to do so, subject to the following |
| 28 |
* conditions: |
| 29 |
* |
| 30 |
* The above copyright notice and this permission notice shall be |
| 31 |
* included in all copies or substantial portions of the Software. |
| 32 |
* |
| 33 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 34 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 35 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 36 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 37 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 38 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 39 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 40 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 41 |
*/ |
| 42 |
|
| 43 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 44 |
#include <dt-bindings/dma/nbpfaxi.h> |
| 45 |
#include <dt-bindings/clock/axis,artpec6-clkctrl.h> |
| 46 |
|
| 47 |
/ { |
| 48 |
#address-cells = <1>; |
| 49 |
#size-cells = <1>; |
| 50 |
compatible = "axis,artpec6"; |
| 51 |
interrupt-parent = <&intc>; |
| 52 |
|
| 53 |
cpus { |
| 54 |
#address-cells = <1>; |
| 55 |
#size-cells = <0>; |
| 56 |
|
| 57 |
cpu0: cpu@0 { |
| 58 |
device_type = "cpu"; |
| 59 |
compatible = "arm,cortex-a9"; |
| 60 |
reg = <0>; |
| 61 |
next-level-cache = <&pl310>; |
| 62 |
}; |
| 63 |
|
| 64 |
cpu1: cpu@1 { |
| 65 |
device_type = "cpu"; |
| 66 |
compatible = "arm,cortex-a9"; |
| 67 |
reg = <1>; |
| 68 |
next-level-cache = <&pl310>; |
| 69 |
}; |
| 70 |
}; |
| 71 |
|
| 72 |
syscon: syscon@f8000000 { |
| 73 |
compatible = "axis,artpec6-syscon", "syscon"; |
| 74 |
reg = <0xf8000000 0x48>; |
| 75 |
}; |
| 76 |
|
| 77 |
psci { |
| 78 |
compatible = "arm,psci-0.2", "arm,psci"; |
| 79 |
method = "smc"; |
| 80 |
psci_version = <0x84000000>; |
| 81 |
cpu_on = <0x84000003>; |
| 82 |
system_reset = <0x84000009>; |
| 83 |
}; |
| 84 |
|
| 85 |
scu@faf00000 { |
| 86 |
compatible = "arm,cortex-a9-scu"; |
| 87 |
reg = <0xfaf00000 0x58>; |
| 88 |
}; |
| 89 |
|
| 90 |
/* Main external clock driving CPU and peripherals */ |
| 91 |
ext_clk: ext_clk { |
| 92 |
#clock-cells = <0>; |
| 93 |
compatible = "fixed-clock"; |
| 94 |
clock-frequency = <50000000>; |
| 95 |
}; |
| 96 |
|
| 97 |
eth_phy_ref_clk: eth_phy_ref_clk { |
| 98 |
#clock-cells = <0>; |
| 99 |
compatible = "fixed-clock"; |
| 100 |
clock-frequency = <125000000>; |
| 101 |
}; |
| 102 |
|
| 103 |
clkctrl: clkctrl@f8000000 { |
| 104 |
#clock-cells = <1>; |
| 105 |
compatible = "axis,artpec6-clkctrl"; |
| 106 |
reg = <0xf8000000 0x48>; |
| 107 |
clocks = <&ext_clk>; |
| 108 |
clock-names = "sys_refclk"; |
| 109 |
}; |
| 110 |
|
| 111 |
gtimer@faf00200 { |
| 112 |
compatible = "arm,cortex-a9-global-timer"; |
| 113 |
reg = <0xfaf00200 0x20>; |
| 114 |
interrupts = <GIC_PPI 11 0xf01>; |
| 115 |
clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>; |
| 116 |
}; |
| 117 |
|
| 118 |
timer@faf00600 { |
| 119 |
compatible = "arm,cortex-a9-twd-timer"; |
| 120 |
reg = <0xfaf00600 0x20>; |
| 121 |
interrupts = <GIC_PPI 13 0xf04>; |
| 122 |
clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>; |
| 123 |
status = "disabled"; |
| 124 |
}; |
| 125 |
|
| 126 |
intc: interrupt-controller@faf01000 { |
| 127 |
interrupt-controller; |
| 128 |
compatible = "arm,cortex-a9-gic"; |
| 129 |
#interrupt-cells = <3>; |
| 130 |
reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >; |
| 131 |
}; |
| 132 |
|
| 133 |
pl310: cache-controller@faf10000 { |
| 134 |
compatible = "arm,pl310-cache"; |
| 135 |
cache-unified; |
| 136 |
cache-level = <2>; |
| 137 |
reg = <0xfaf10000 0x1000>; |
| 138 |
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| 139 |
arm,data-latency = <1 1 1>; |
| 140 |
arm,tag-latency = <1 1 1>; |
| 141 |
arm,filter-ranges = <0x0 0x80000000>; |
| 142 |
arm,double-linefill = <1>; |
| 143 |
arm,double-linefill-incr = <0>; |
| 144 |
arm,double-linefill-wrap = <0>; |
| 145 |
prefetch-data = <1>; |
| 146 |
prefetch-instr = <1>; |
| 147 |
arm,prefetch-offset = <0>; |
| 148 |
arm,prefetch-drop = <1>; |
| 149 |
}; |
| 150 |
|
| 151 |
pmu { |
| 152 |
compatible = "arm,cortex-a9-pmu"; |
| 153 |
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| 154 |
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 155 |
interrupt-affinity = <&cpu0>, <&cpu1>; |
| 156 |
}; |
| 157 |
|
| 158 |
/* |
| 159 |
* Both pci nodes cannot be enabled at the same time, |
| 160 |
* leave the unwanted node as disabled. |
| 161 |
*/ |
| 162 |
pcie: pcie@f8050000 { |
| 163 |
compatible = "axis,artpec6-pcie", "snps,dw-pcie"; |
| 164 |
reg = <0xf8050000 0x2000 |
| 165 |
0xf8040000 0x1000 |
| 166 |
0xc0000000 0x2000>; |
| 167 |
reg-names = "dbi", "phy", "config"; |
| 168 |
#address-cells = <3>; |
| 169 |
#size-cells = <2>; |
| 170 |
device_type = "pci"; |
| 171 |
/* downstream I/O */ |
| 172 |
ranges = <0x81000000 0 0 0xc0002000 0 0x00010000 |
| 173 |
/* non-prefetchable memory */ |
| 174 |
0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>; |
| 175 |
num-lanes = <2>; |
| 176 |
bus-range = <0x00 0xff>; |
| 177 |
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; |
| 178 |
interrupt-names = "msi"; |
| 179 |
#interrupt-cells = <1>; |
| 180 |
interrupt-map-mask = <0 0 0 0x7>; |
| 181 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| 182 |
<0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| 183 |
<0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| 184 |
<0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; |
| 185 |
axis,syscon-pcie = <&syscon>; |
| 186 |
status = "disabled"; |
| 187 |
}; |
| 188 |
|
| 189 |
pcie_ep: pcie_ep@f8050000 { |
| 190 |
compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie"; |
| 191 |
reg = <0xf8050000 0x2000 |
| 192 |
0xf8051000 0x2000 |
| 193 |
0xf8040000 0x1000 |
| 194 |
0xc0000000 0x20000000>; |
| 195 |
reg-names = "dbi", "dbi2", "phy", "addr_space"; |
| 196 |
num-ib-windows = <6>; |
| 197 |
num-ob-windows = <2>; |
| 198 |
num-lanes = <2>; |
| 199 |
axis,syscon-pcie = <&syscon>; |
| 200 |
status = "disabled"; |
| 201 |
}; |
| 202 |
|
| 203 |
pinctrl: pinctrl@f801d000 { |
| 204 |
compatible = "axis,artpec6-pinctrl"; |
| 205 |
reg = <0xf801d000 0x400>; |
| 206 |
|
| 207 |
pinctrl_uart0: uart0grp { |
| 208 |
function = "uart0"; |
| 209 |
groups = "uart0grp2"; |
| 210 |
bias-pull-up; |
| 211 |
}; |
| 212 |
pinctrl_uart1: uart1grp { |
| 213 |
function = "uart1"; |
| 214 |
groups = "uart1grp0"; |
| 215 |
bias-pull-up; |
| 216 |
}; |
| 217 |
pinctrl_uart2: uart2grp { |
| 218 |
function = "uart2"; |
| 219 |
groups = "uart2grp1"; |
| 220 |
bias-pull-up; |
| 221 |
}; |
| 222 |
pinctrl_uart3: uart3grp { |
| 223 |
function = "uart3"; |
| 224 |
groups = "uart3grp0"; |
| 225 |
bias-pull-up; |
| 226 |
}; |
| 227 |
}; |
| 228 |
|
| 229 |
amba@0 { |
| 230 |
compatible = "simple-bus"; |
| 231 |
#address-cells = <0x1>; |
| 232 |
#size-cells = <0x1>; |
| 233 |
ranges; |
| 234 |
dma-ranges; |
| 235 |
|
| 236 |
crypto@f4264000 { |
| 237 |
compatible = "axis,artpec6-crypto"; |
| 238 |
reg = <0xf4264000 0x4000>; |
| 239 |
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| 240 |
}; |
| 241 |
|
| 242 |
dma0: dma@f8019000 { |
| 243 |
compatible = "renesas,nbpfaxi64dmac8b16"; |
| 244 |
reg = <0xf8019000 0x400>; |
| 245 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */ |
| 246 |
<GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, |
| 247 |
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| 248 |
<GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, |
| 249 |
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, |
| 250 |
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| 251 |
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
| 252 |
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| 253 |
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 254 |
interrupt-names = "error", |
| 255 |
"ch0", "ch1", "ch2", "ch3", |
| 256 |
"ch4", "ch5", "ch6", "ch7", |
| 257 |
"ch8", "ch9", "ch10", "ch12", |
| 258 |
"ch12", "ch13", "ch14", "ch15"; |
| 259 |
clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>; |
| 260 |
#dma-cells = <2>; |
| 261 |
dma-channels = <8>; |
| 262 |
dma-requests = <8>; |
| 263 |
}; |
| 264 |
dma1: dma@f8019400 { |
| 265 |
compatible = "renesas,nbpfaxi64dmac8b16"; |
| 266 |
reg = <0xf8019400 0x400>; |
| 267 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */ |
| 268 |
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| 269 |
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, |
| 270 |
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| 271 |
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, |
| 272 |
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| 273 |
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, |
| 274 |
<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, |
| 275 |
<GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| 276 |
interrupt-names = "error", |
| 277 |
"ch0", "ch1", "ch2", "ch3", |
| 278 |
"ch4", "ch5", "ch6", "ch7", |
| 279 |
"ch8", "ch9", "ch10", "ch12", |
| 280 |
"ch12", "ch13", "ch14", "ch15"; |
| 281 |
clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>; |
| 282 |
#dma-cells = <2>; |
| 283 |
dma-channels = <8>; |
| 284 |
dma-requests = <8>; |
| 285 |
}; |
| 286 |
|
| 287 |
ethernet: ethernet@f8010000 { |
| 288 |
clock-names = "stmmaceth", "ptp_ref"; |
| 289 |
clocks = <&clkctrl ARTPEC6_CLK_ETH_ACLK>, |
| 290 |
<&clkctrl ARTPEC6_CLK_PTP_REF>; |
| 291 |
compatible = "snps,dwmac-4.10a", "snps,dwmac"; |
| 292 |
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| 293 |
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| 294 |
interrupt-names = "macirq", "eth_lpi"; |
| 295 |
reg = <0xf8010000 0x4000>; |
| 296 |
|
| 297 |
snps,axi-config = <&stmmac_axi_setup>; |
| 298 |
snps,mtl-rx-config = <&mtl_rx_setup>; |
| 299 |
snps,mtl-tx-config = <&mtl_tx_setup>; |
| 300 |
|
| 301 |
snps,txpbl = <8>; |
| 302 |
snps,rxpbl = <2>; |
| 303 |
snps,aal; |
| 304 |
snps,tso; |
| 305 |
|
| 306 |
status = "disabled"; |
| 307 |
|
| 308 |
stmmac_axi_setup: stmmac-axi-config { |
| 309 |
snps,wr_osr_lmt = <1>; |
| 310 |
snps,rd_osr_lmt = <15>; |
| 311 |
/* If FB is disabled, the AXI master chooses |
| 312 |
* a burst length of any value less than the |
| 313 |
* maximum enabled burst length |
| 314 |
* (all lesser burst length enables are redundant). |
| 315 |
*/ |
| 316 |
snps,blen = <0 0 0 0 16 0 0>; |
| 317 |
}; |
| 318 |
|
| 319 |
mtl_rx_setup: rx-queues-config { |
| 320 |
snps,rx-queues-to-use = <1>; |
| 321 |
queue0 {}; |
| 322 |
}; |
| 323 |
|
| 324 |
mtl_tx_setup: tx-queues-config { |
| 325 |
snps,tx-queues-to-use = <2>; |
| 326 |
queue0 {}; |
| 327 |
queue1 {}; |
| 328 |
}; |
| 329 |
}; |
| 330 |
|
| 331 |
uart0: serial@f8036000 { |
| 332 |
compatible = "arm,pl011", "arm,primecell"; |
| 333 |
reg = <0xf8036000 0x1000>; |
| 334 |
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| 335 |
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, |
| 336 |
<&clkctrl ARTPEC6_CLK_UART_PCLK>; |
| 337 |
clock-names = "uart_clk", "apb_pclk"; |
| 338 |
pinctrl-names = "default"; |
| 339 |
pinctrl-0 = <&pinctrl_uart0>; |
| 340 |
dmas = <&dma0 4 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, |
| 341 |
<&dma0 5 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; |
| 342 |
dma-names = "rx", "tx"; |
| 343 |
status = "disabled"; |
| 344 |
}; |
| 345 |
uart1: serial@f8037000 { |
| 346 |
compatible = "arm,pl011", "arm,primecell"; |
| 347 |
reg = <0xf8037000 0x1000>; |
| 348 |
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; |
| 349 |
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, |
| 350 |
<&clkctrl ARTPEC6_CLK_UART_PCLK>; |
| 351 |
clock-names = "uart_clk", "apb_pclk"; |
| 352 |
pinctrl-names = "default"; |
| 353 |
pinctrl-0 = <&pinctrl_uart1>; |
| 354 |
dmas = <&dma0 6 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, |
| 355 |
<&dma0 7 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; |
| 356 |
dma-names = "rx", "tx"; |
| 357 |
status = "disabled"; |
| 358 |
}; |
| 359 |
uart2: serial@f8038000 { |
| 360 |
compatible = "arm,pl011", "arm,primecell"; |
| 361 |
reg = <0xf8038000 0x1000>; |
| 362 |
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| 363 |
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, |
| 364 |
<&clkctrl ARTPEC6_CLK_UART_PCLK>; |
| 365 |
clock-names = "uart_clk", "apb_pclk"; |
| 366 |
pinctrl-names = "default"; |
| 367 |
pinctrl-0 = <&pinctrl_uart2>; |
| 368 |
dmas = <&dma1 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, |
| 369 |
<&dma1 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; |
| 370 |
dma-names = "rx", "tx"; |
| 371 |
status = "disabled"; |
| 372 |
}; |
| 373 |
uart3: serial@f8039000 { |
| 374 |
compatible = "arm,pl011", "arm,primecell"; |
| 375 |
reg = <0xf8039000 0x1000>; |
| 376 |
interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; |
| 377 |
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, |
| 378 |
<&clkctrl ARTPEC6_CLK_UART_PCLK>; |
| 379 |
clock-names = "uart_clk", "apb_pclk"; |
| 380 |
pinctrl-names = "default"; |
| 381 |
pinctrl-0 = <&pinctrl_uart3>; |
| 382 |
dmas = <&dma1 2 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, |
| 383 |
<&dma1 3 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; |
| 384 |
dma-names = "rx", "tx"; |
| 385 |
status = "disabled"; |
| 386 |
}; |
| 387 |
}; |
| 388 |
}; |