| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Actions Semi S500 SoC |
| 4 |
* |
| 5 |
* Copyright (c) 2016-2017 Andreas Färber |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/clock/actions,s500-cmu.h> |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 11 |
#include <dt-bindings/power/owl-s500-powergate.h> |
| 12 |
#include <dt-bindings/reset/actions,s500-reset.h> |
| 13 |
|
| 14 |
/ { |
| 15 |
compatible = "actions,s500"; |
| 16 |
interrupt-parent = <&gic>; |
| 17 |
#address-cells = <1>; |
| 18 |
#size-cells = <1>; |
| 19 |
|
| 20 |
aliases { |
| 21 |
}; |
| 22 |
|
| 23 |
chosen { |
| 24 |
}; |
| 25 |
|
| 26 |
cpus { |
| 27 |
#address-cells = <1>; |
| 28 |
#size-cells = <0>; |
| 29 |
|
| 30 |
cpu0: cpu@0 { |
| 31 |
device_type = "cpu"; |
| 32 |
compatible = "arm,cortex-a9"; |
| 33 |
reg = <0x0>; |
| 34 |
enable-method = "actions,s500-smp"; |
| 35 |
}; |
| 36 |
|
| 37 |
cpu1: cpu@1 { |
| 38 |
device_type = "cpu"; |
| 39 |
compatible = "arm,cortex-a9"; |
| 40 |
reg = <0x1>; |
| 41 |
enable-method = "actions,s500-smp"; |
| 42 |
}; |
| 43 |
|
| 44 |
cpu2: cpu@2 { |
| 45 |
device_type = "cpu"; |
| 46 |
compatible = "arm,cortex-a9"; |
| 47 |
reg = <0x2>; |
| 48 |
enable-method = "actions,s500-smp"; |
| 49 |
power-domains = <&sps S500_PD_CPU2>; |
| 50 |
}; |
| 51 |
|
| 52 |
cpu3: cpu@3 { |
| 53 |
device_type = "cpu"; |
| 54 |
compatible = "arm,cortex-a9"; |
| 55 |
reg = <0x3>; |
| 56 |
enable-method = "actions,s500-smp"; |
| 57 |
power-domains = <&sps S500_PD_CPU3>; |
| 58 |
}; |
| 59 |
}; |
| 60 |
|
| 61 |
arm-pmu { |
| 62 |
compatible = "arm,cortex-a9-pmu"; |
| 63 |
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| 64 |
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| 65 |
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| 66 |
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 67 |
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| 68 |
}; |
| 69 |
|
| 70 |
hosc: hosc { |
| 71 |
compatible = "fixed-clock"; |
| 72 |
clock-frequency = <24000000>; |
| 73 |
#clock-cells = <0>; |
| 74 |
}; |
| 75 |
|
| 76 |
losc: losc { |
| 77 |
compatible = "fixed-clock"; |
| 78 |
clock-frequency = <32768>; |
| 79 |
#clock-cells = <0>; |
| 80 |
}; |
| 81 |
|
| 82 |
soc { |
| 83 |
compatible = "simple-bus"; |
| 84 |
#address-cells = <1>; |
| 85 |
#size-cells = <1>; |
| 86 |
ranges; |
| 87 |
|
| 88 |
scu: scu@b0020000 { |
| 89 |
compatible = "arm,cortex-a9-scu"; |
| 90 |
reg = <0xb0020000 0x100>; |
| 91 |
}; |
| 92 |
|
| 93 |
global_timer: timer@b0020200 { |
| 94 |
compatible = "arm,cortex-a9-global-timer"; |
| 95 |
reg = <0xb0020200 0x100>; |
| 96 |
interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; |
| 97 |
status = "disabled"; |
| 98 |
}; |
| 99 |
|
| 100 |
twd_timer: timer@b0020600 { |
| 101 |
compatible = "arm,cortex-a9-twd-timer"; |
| 102 |
reg = <0xb0020600 0x20>; |
| 103 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; |
| 104 |
status = "disabled"; |
| 105 |
}; |
| 106 |
|
| 107 |
twd_wdt: wdt@b0020620 { |
| 108 |
compatible = "arm,cortex-a9-twd-wdt"; |
| 109 |
reg = <0xb0020620 0xe0>; |
| 110 |
interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; |
| 111 |
status = "disabled"; |
| 112 |
}; |
| 113 |
|
| 114 |
gic: interrupt-controller@b0021000 { |
| 115 |
compatible = "arm,cortex-a9-gic"; |
| 116 |
reg = <0xb0021000 0x1000>, |
| 117 |
<0xb0020100 0x0100>; |
| 118 |
interrupt-controller; |
| 119 |
#interrupt-cells = <3>; |
| 120 |
}; |
| 121 |
|
| 122 |
l2: cache-controller@b0022000 { |
| 123 |
compatible = "arm,pl310-cache"; |
| 124 |
reg = <0xb0022000 0x1000>; |
| 125 |
cache-unified; |
| 126 |
cache-level = <2>; |
| 127 |
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| 128 |
arm,tag-latency = <3 3 2>; |
| 129 |
arm,data-latency = <5 3 3>; |
| 130 |
}; |
| 131 |
|
| 132 |
uart0: serial@b0120000 { |
| 133 |
compatible = "actions,s500-uart", "actions,owl-uart"; |
| 134 |
reg = <0xb0120000 0x2000>; |
| 135 |
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 136 |
clocks = <&cmu CLK_UART0>; |
| 137 |
status = "disabled"; |
| 138 |
}; |
| 139 |
|
| 140 |
uart1: serial@b0122000 { |
| 141 |
compatible = "actions,s500-uart", "actions,owl-uart"; |
| 142 |
reg = <0xb0122000 0x2000>; |
| 143 |
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| 144 |
clocks = <&cmu CLK_UART1>; |
| 145 |
status = "disabled"; |
| 146 |
}; |
| 147 |
|
| 148 |
uart2: serial@b0124000 { |
| 149 |
compatible = "actions,s500-uart", "actions,owl-uart"; |
| 150 |
reg = <0xb0124000 0x2000>; |
| 151 |
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| 152 |
clocks = <&cmu CLK_UART2>; |
| 153 |
status = "disabled"; |
| 154 |
}; |
| 155 |
|
| 156 |
uart3: serial@b0126000 { |
| 157 |
compatible = "actions,s500-uart", "actions,owl-uart"; |
| 158 |
reg = <0xb0126000 0x2000>; |
| 159 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 160 |
clocks = <&cmu CLK_UART3>; |
| 161 |
status = "disabled"; |
| 162 |
}; |
| 163 |
|
| 164 |
uart4: serial@b0128000 { |
| 165 |
compatible = "actions,s500-uart", "actions,owl-uart"; |
| 166 |
reg = <0xb0128000 0x2000>; |
| 167 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 168 |
clocks = <&cmu CLK_UART4>; |
| 169 |
status = "disabled"; |
| 170 |
}; |
| 171 |
|
| 172 |
uart5: serial@b012a000 { |
| 173 |
compatible = "actions,s500-uart", "actions,owl-uart"; |
| 174 |
reg = <0xb012a000 0x2000>; |
| 175 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 176 |
clocks = <&cmu CLK_UART5>; |
| 177 |
status = "disabled"; |
| 178 |
}; |
| 179 |
|
| 180 |
uart6: serial@b012c000 { |
| 181 |
compatible = "actions,s500-uart", "actions,owl-uart"; |
| 182 |
reg = <0xb012c000 0x2000>; |
| 183 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 184 |
clocks = <&cmu CLK_UART6>; |
| 185 |
status = "disabled"; |
| 186 |
}; |
| 187 |
|
| 188 |
cmu: clock-controller@b0160000 { |
| 189 |
compatible = "actions,s500-cmu"; |
| 190 |
reg = <0xb0160000 0x8000>; |
| 191 |
clocks = <&hosc>, <&losc>; |
| 192 |
#clock-cells = <1>; |
| 193 |
#reset-cells = <1>; |
| 194 |
}; |
| 195 |
|
| 196 |
i2c0: i2c@b0170000 { |
| 197 |
compatible = "actions,s500-i2c"; |
| 198 |
reg = <0xb0170000 0x4000>; |
| 199 |
clocks = <&cmu CLK_I2C0>; |
| 200 |
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 201 |
#address-cells = <1>; |
| 202 |
#size-cells = <0>; |
| 203 |
status = "disabled"; |
| 204 |
}; |
| 205 |
|
| 206 |
i2c1: i2c@b0174000 { |
| 207 |
compatible = "actions,s500-i2c"; |
| 208 |
reg = <0xb0174000 0x4000>; |
| 209 |
clocks = <&cmu CLK_I2C1>; |
| 210 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 211 |
#address-cells = <1>; |
| 212 |
#size-cells = <0>; |
| 213 |
status = "disabled"; |
| 214 |
}; |
| 215 |
|
| 216 |
i2c2: i2c@b0178000 { |
| 217 |
compatible = "actions,s500-i2c"; |
| 218 |
reg = <0xb0178000 0x4000>; |
| 219 |
clocks = <&cmu CLK_I2C2>; |
| 220 |
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| 221 |
#address-cells = <1>; |
| 222 |
#size-cells = <0>; |
| 223 |
status = "disabled"; |
| 224 |
}; |
| 225 |
|
| 226 |
i2c3: i2c@b017c000 { |
| 227 |
compatible = "actions,s500-i2c"; |
| 228 |
reg = <0xb017c000 0x4000>; |
| 229 |
clocks = <&cmu CLK_I2C3>; |
| 230 |
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 231 |
#address-cells = <1>; |
| 232 |
#size-cells = <0>; |
| 233 |
status = "disabled"; |
| 234 |
}; |
| 235 |
|
| 236 |
sirq: interrupt-controller@b01b0200 { |
| 237 |
compatible = "actions,s500-sirq"; |
| 238 |
reg = <0xb01b0200 0x4>; |
| 239 |
interrupt-controller; |
| 240 |
#interrupt-cells = <2>; |
| 241 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */ |
| 242 |
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */ |
| 243 |
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */ |
| 244 |
}; |
| 245 |
|
| 246 |
timer: timer@b0168000 { |
| 247 |
compatible = "actions,s500-timer"; |
| 248 |
reg = <0xb0168000 0x8000>; |
| 249 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 250 |
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| 251 |
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| 252 |
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 253 |
interrupt-names = "2hz0", "2hz1", "timer0", "timer1"; |
| 254 |
}; |
| 255 |
|
| 256 |
sps: power-controller@b01b0100 { |
| 257 |
compatible = "actions,s500-sps"; |
| 258 |
reg = <0xb01b0100 0x100>; |
| 259 |
#power-domain-cells = <1>; |
| 260 |
}; |
| 261 |
|
| 262 |
pinctrl: pinctrl@b01b0000 { |
| 263 |
compatible = "actions,s500-pinctrl"; |
| 264 |
reg = <0xb01b0000 0x40>, /* GPIO */ |
| 265 |
<0xb01b0040 0x10>, /* Multiplexing Control */ |
| 266 |
<0xb01b0060 0x18>, /* PAD Control */ |
| 267 |
<0xb01b0080 0xc>; /* PAD Drive Capacity */ |
| 268 |
clocks = <&cmu CLK_GPIO>; |
| 269 |
gpio-controller; |
| 270 |
gpio-ranges = <&pinctrl 0 0 132>; |
| 271 |
#gpio-cells = <2>; |
| 272 |
interrupt-controller; |
| 273 |
#interrupt-cells = <2>; |
| 274 |
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */ |
| 275 |
<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */ |
| 276 |
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */ |
| 277 |
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */ |
| 278 |
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */ |
| 279 |
}; |
| 280 |
|
| 281 |
dma: dma-controller@b0260000 { |
| 282 |
compatible = "actions,s500-dma"; |
| 283 |
reg = <0xb0260000 0xd00>; |
| 284 |
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, |
| 285 |
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| 286 |
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| 287 |
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| 288 |
#dma-cells = <1>; |
| 289 |
dma-channels = <12>; |
| 290 |
dma-requests = <46>; |
| 291 |
clocks = <&cmu CLK_DMAC>; |
| 292 |
power-domains = <&sps S500_PD_DMA>; |
| 293 |
}; |
| 294 |
|
| 295 |
mmc0: mmc@b0230000 { |
| 296 |
compatible = "actions,s500-mmc", "actions,owl-mmc"; |
| 297 |
reg = <0xb0230000 0x38>; |
| 298 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 299 |
clocks = <&cmu CLK_SD0>; |
| 300 |
resets = <&cmu RESET_SD0>; |
| 301 |
dmas = <&dma 2>; |
| 302 |
dma-names = "mmc"; |
| 303 |
status = "disabled"; |
| 304 |
}; |
| 305 |
|
| 306 |
mmc1: mmc@b0234000 { |
| 307 |
compatible = "actions,s500-mmc", "actions,owl-mmc"; |
| 308 |
reg = <0xb0234000 0x38>; |
| 309 |
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 310 |
clocks = <&cmu CLK_SD1>; |
| 311 |
resets = <&cmu RESET_SD1>; |
| 312 |
dmas = <&dma 3>; |
| 313 |
dma-names = "mmc"; |
| 314 |
status = "disabled"; |
| 315 |
}; |
| 316 |
|
| 317 |
mmc2: mmc@b0238000 { |
| 318 |
compatible = "actions,s500-mmc", "actions,owl-mmc"; |
| 319 |
reg = <0xb0238000 0x38>; |
| 320 |
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| 321 |
clocks = <&cmu CLK_SD2>; |
| 322 |
resets = <&cmu RESET_SD2>; |
| 323 |
dmas = <&dma 4>; |
| 324 |
dma-names = "mmc"; |
| 325 |
status = "disabled"; |
| 326 |
}; |
| 327 |
|
| 328 |
ethernet: ethernet@b0310000 { |
| 329 |
compatible = "actions,s500-emac", "actions,owl-emac"; |
| 330 |
reg = <0xb0310000 0x10000>; |
| 331 |
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| 332 |
clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>; |
| 333 |
clock-names = "eth", "rmii"; |
| 334 |
resets = <&cmu RESET_ETHERNET>; |
| 335 |
status = "disabled"; |
| 336 |
}; |
| 337 |
}; |
| 338 |
}; |