Debian Codegraph @

Documentation/userspace-api/media/v4l/colorspaces.rst

raw
1 .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
2 .. c:namespace:: V4L
3
4 .. _colorspaces:
5
6 ***********
7 Colorspaces
8 ***********
9
10 'Color' is a very complex concept and depends on physics, chemistry and
11 biology. Just because you have three numbers that describe the 'red',
12 'green' and 'blue' components of the color of a pixel does not mean that
13 you can accurately display that color. A colorspace defines what it
14 actually *means* to have an RGB value of e.g. (255, 0, 0). That is,
15 which color should be reproduced on the screen in a perfectly calibrated
16 environment.
17
18 In order to do that we first need to have a good definition of color,
19 i.e. some way to uniquely and unambiguously define a color so that
20 someone else can reproduce it. Human color vision is trichromatic since
21 the human eye has color receptors that are sensitive to three different
22 wavelengths of light. Hence the need to use three numbers to describe
23 color. Be glad you are not a mantis shrimp as those are sensitive to 12
24 different wavelengths, so instead of RGB we would be using the
25 ABCDEFGHIJKL colorspace...
26
27 Color exists only in the eye and brain and is the result of how strongly
28 color receptors are stimulated. This is based on the Spectral Power
29 Distribution (SPD) which is a graph showing the intensity (radiant
30 power) of the light at wavelengths covering the visible spectrum as it
31 enters the eye. The science of colorimetry is about the relationship
32 between the SPD and color as perceived by the human brain.
33
34 Since the human eye has only three color receptors it is perfectly
35 possible that different SPDs will result in the same stimulation of
36 those receptors and are perceived as the same color, even though the SPD
37 of the light is different.
38
39 In the 1920s experiments were devised to determine the relationship
40 between SPDs and the perceived color and that resulted in the CIE 1931
41 standard that defines spectral weighting functions that model the
42 perception of color. Specifically that standard defines functions that
43 can take an SPD and calculate the stimulus for each color receptor.
44 After some further mathematical transforms these stimuli are known as
45 the *CIE XYZ tristimulus* values and these X, Y and Z values describe a
46 color as perceived by a human unambiguously. These X, Y and Z values are
47 all in the range [0…1].
48
49 The Y value in the CIE XYZ colorspace corresponds to luminance. Often
50 the CIE XYZ colorspace is transformed to the normalized CIE xyY
51 colorspace:
52
53 x = X / (X + Y + Z)
54
55 y = Y / (X + Y + Z)
56
57 The x and y values are the chromaticity coordinates and can be used to
58 define a color without the luminance component Y. It is very confusing
59 to have such similar names for these colorspaces. Just be aware that if
60 colors are specified with lower case 'x' and 'y', then the CIE xyY
61 colorspace is used. Upper case 'X' and 'Y' refer to the CIE XYZ
62 colorspace. Also, y has nothing to do with luminance. Together x and y
63 specify a color, and Y the luminance. That is really all you need to
64 remember from a practical point of view. At the end of this section you
65 will find reading resources that go into much more detail if you are
66 interested.
67
68 A monitor or TV will reproduce colors by emitting light at three
69 different wavelengths, the combination of which will stimulate the color
70 receptors in the eye and thus cause the perception of color.
71 Historically these wavelengths were defined by the red, green and blue
72 phosphors used in the displays. These *color primaries* are part of what
73 defines a colorspace.
74
75 Different display devices will have different primaries and some
76 primaries are more suitable for some display technologies than others.
77 This has resulted in a variety of colorspaces that are used for
78 different display technologies or uses. To define a colorspace you need
79 to define the three color primaries (these are typically defined as x, y
80 chromaticity coordinates from the CIE xyY colorspace) but also the white
81 reference: that is the color obtained when all three primaries are at
82 maximum power. This determines the relative power or energy of the
83 primaries. This is usually chosen to be close to daylight which has been
84 defined as the CIE D65 Illuminant.
85
86 To recapitulate: the CIE XYZ colorspace uniquely identifies colors.
87 Other colorspaces are defined by three chromaticity coordinates defined
88 in the CIE xyY colorspace. Based on those a 3x3 matrix can be
89 constructed that transforms CIE XYZ colors to colors in the new
90 colorspace.
91
92 Both the CIE XYZ and the RGB colorspace that are derived from the
93 specific chromaticity primaries are linear colorspaces. But neither the
94 eye, nor display technology is linear. Doubling the values of all
95 components in the linear colorspace will not be perceived as twice the
96 intensity of the color. So each colorspace also defines a transfer
97 function that takes a linear color component value and transforms it to
98 the non-linear component value, which is a closer match to the
99 non-linear performance of both the eye and displays. Linear component
100 values are denoted RGB, non-linear are denoted as R'G'B'. In general
101 colors used in graphics are all R'G'B', except in openGL which uses
102 linear RGB. Special care should be taken when dealing with openGL to
103 provide linear RGB colors or to use the built-in openGL support to apply
104 the inverse transfer function.
105
106 The final piece that defines a colorspace is a function that transforms
107 non-linear R'G'B' to non-linear Y'CbCr. This function is determined by
108 the so-called luma coefficients. There may be multiple possible Y'CbCr
109 encodings allowed for the same colorspace. Many encodings of color
110 prefer to use luma (Y') and chroma (CbCr) instead of R'G'B'. Since the
111 human eye is more sensitive to differences in luminance than in color
112 this encoding allows one to reduce the amount of color information
113 compared to the luma data. Note that the luma (Y') is unrelated to the Y
114 in the CIE XYZ colorspace. Also note that Y'CbCr is often called YCbCr
115 or YUV even though these are strictly speaking wrong.
116
117 Sometimes people confuse Y'CbCr as being a colorspace. This is not
118 correct, it is just an encoding of an R'G'B' color into luma and chroma
119 values. The underlying colorspace that is associated with the R'G'B'
120 color is also associated with the Y'CbCr color.
121
122 The final step is how the RGB, R'G'B' or Y'CbCr values are quantized.
123 The CIE XYZ colorspace where X, Y and Z are in the range [0…1] describes
124 all colors that humans can perceive, but the transform to another
125 colorspace will produce colors that are outside the [0…1] range. Once
126 clamped to the [0…1] range those colors can no longer be reproduced in
127 that colorspace. This clamping is what reduces the extent or gamut of
128 the colorspace. How the range of [0…1] is translated to integer values
129 in the range of [0…255] (or higher, depending on the color depth) is
130 called the quantization. This is *not* part of the colorspace
131 definition. In practice RGB or R'G'B' values are full range, i.e. they
132 use the full [0…255] range. Y'CbCr values on the other hand are limited
133 range with Y' using [16…235] and Cb and Cr using [16…240].
134
135 Unfortunately, in some cases limited range RGB is also used where the
136 components use the range [16…235]. And full range Y'CbCr also exists
137 using the [0…255] range.
138
139 In order to correctly interpret a color you need to know the
140 quantization range, whether it is R'G'B' or Y'CbCr, the used Y'CbCr
141 encoding and the colorspace. From that information you can calculate the
142 corresponding CIE XYZ color and map that again to whatever colorspace
143 your display device uses.
144
145 The colorspace definition itself consists of the three chromaticity
146 primaries, the white reference chromaticity, a transfer function and the
147 luma coefficients needed to transform R'G'B' to Y'CbCr. While some
148 colorspace standards correctly define all four, quite often the
149 colorspace standard only defines some, and you have to rely on other
150 standards for the missing pieces. The fact that colorspaces are often a
151 mix of different standards also led to very confusing naming conventions
152 where the name of a standard was used to name a colorspace when in fact
153 that standard was part of various other colorspaces as well.
154
155 If you want to read more about colors and colorspaces, then the
156 following resources are useful: :ref:`poynton` is a good practical
157 book for video engineers, :ref:`colimg` has a much broader scope and
158 describes many more aspects of color (physics, chemistry, biology,
159 etc.). The
160 `http://www.brucelindbloom.com <http://www.brucelindbloom.com>`__
161 website is an excellent resource, especially with respect to the
162 mathematics behind colorspace conversions. The wikipedia
163 `CIE 1931 colorspace <http://en.wikipedia.org/wiki/CIE_1931_color_space#CIE_xy_chromaticity_diagram_and_the_CIE_xyY_color_space>`__
164 article is also very useful.