Debian Codegraph @

Documentation/tools/rtla/common_osnoise_options.txt

raw
1 .. |threshold| replace:: **-a/--auto**, **-s/--stop**, or **-S/--stop-total**
2 .. |thresharg| replace:: -s
3 .. |tracer| replace:: osnoise
4
5 .. |actionsperf| replace::
6 Due to implementational limitations, actions might be delayed
7 up to one second after tracing is stopped.
8
9 **-a**, **--auto** *us*
10
11 Set the automatic trace mode. This mode sets some commonly used options
12 while debugging the system. It is equivalent to use **-s** *us* **-T 1 -t**.
13
14 **-p**, **--period** *us*
15
16 Set the *osnoise* tracer period in microseconds.
17
18 **-r**, **--runtime** *us*
19
20 Set the *osnoise* tracer runtime in microseconds.
21
22 **-s**, **--stop** *us*
23
24 Stop the trace if a single sample is higher than the argument in microseconds.
25 If **-T** is set, it will also save the trace to the output.
26
27 **-S**, **--stop-total** *us*
28
29 Stop the trace if the total sample is higher than the argument in microseconds.
30 If **-T** is set, it will also save the trace to the output.
31
32 **-T**, **--threshold** *us*
33
34 Specify the minimum delta between two time reads to be considered noise.
35 The default threshold is *5 us*.
36
37 **-t**, **--trace** \[*file*]
38
39 Save the stopped trace to [*file|osnoise_trace.txt*].