| 1 |
.. SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
=========================== |
| 4 |
ACPI Fan Performance States |
| 5 |
=========================== |
| 6 |
|
| 7 |
When the optional _FPS object is present under an ACPI device representing a |
| 8 |
fan (for example, PNP0C0B or INT3404), the ACPI fan driver creates additional |
| 9 |
"state*" attributes in the sysfs directory of the ACPI device in question. |
| 10 |
These attributes list properties of fan performance states. |
| 11 |
|
| 12 |
For more information on _FPS refer to the ACPI specification at: |
| 13 |
|
| 14 |
http://uefi.org/specifications |
| 15 |
|
| 16 |
For instance, the contents of the INT3404 ACPI device sysfs directory |
| 17 |
may look as follows:: |
| 18 |
|
| 19 |
$ ls -l /sys/bus/acpi/devices/INT3404:00/ |
| 20 |
total 0 |
| 21 |
... |
| 22 |
-r--r--r-- 1 root root 4096 Dec 13 20:38 state0 |
| 23 |
-r--r--r-- 1 root root 4096 Dec 13 20:38 state1 |
| 24 |
-r--r--r-- 1 root root 4096 Dec 13 20:38 state10 |
| 25 |
-r--r--r-- 1 root root 4096 Dec 13 20:38 state11 |
| 26 |
-r--r--r-- 1 root root 4096 Dec 13 20:38 state2 |
| 27 |
-r--r--r-- 1 root root 4096 Dec 13 20:38 state3 |
| 28 |
-r--r--r-- 1 root root 4096 Dec 13 20:38 state4 |
| 29 |
-r--r--r-- 1 root root 4096 Dec 13 20:38 state5 |
| 30 |
-r--r--r-- 1 root root 4096 Dec 13 20:38 state6 |
| 31 |
-r--r--r-- 1 root root 4096 Dec 13 20:38 state7 |
| 32 |
-r--r--r-- 1 root root 4096 Dec 13 20:38 state8 |
| 33 |
-r--r--r-- 1 root root 4096 Dec 13 20:38 state9 |
| 34 |
-r--r--r-- 1 root root 4096 Dec 13 01:00 status |
| 35 |
... |
| 36 |
|
| 37 |
where each of the "state*" files represents one performance state of the fan |
| 38 |
and contains a colon-separated list of 5 integer numbers (fields) with the |
| 39 |
following interpretation:: |
| 40 |
|
| 41 |
control_percent:trip_point_index:speed_rpm:noise_level_mdb:power_mw |
| 42 |
|
| 43 |
* ``control_percent``: The percent value to be used to set the fan speed to a |
| 44 |
specific level using the _FSL object (0-100). |
| 45 |
|
| 46 |
* ``trip_point_index``: The active cooling trip point number that corresponds |
| 47 |
to this performance state (0-9). |
| 48 |
|
| 49 |
* ``speed_rpm``: Speed of the fan in rotations per minute. |
| 50 |
|
| 51 |
* ``noise_level_mdb``: Audible noise emitted by the fan in this state in |
| 52 |
millidecibels. |
| 53 |
|
| 54 |
* ``power_mw``: Power draw of the fan in this state in milliwatts. |
| 55 |
|
| 56 |
For example:: |
| 57 |
|
| 58 |
$cat /sys/bus/acpi/devices/INT3404:00/state1 |
| 59 |
25:0:3200:12500:1250 |
| 60 |
|
| 61 |
When a given field is not populated or its value provided by the platform |
| 62 |
firmware is invalid, the "not-defined" string is shown instead of the value. |
| 63 |
|
| 64 |
ACPI Fan Fine Grain Control |
| 65 |
============================= |
| 66 |
|
| 67 |
When _FIF object specifies support for fine grain control, then fan speed |
| 68 |
can be set from 0 to 100% with the recommended minimum "step size" via |
| 69 |
_FSL object. User can adjust fan speed using thermal sysfs cooling device. |
| 70 |
|
| 71 |
Here use can look at fan performance states for a reference speed (speed_rpm) |
| 72 |
and set it by changing cooling device cur_state. If the fine grain control |
| 73 |
is supported then user can also adjust to some other speeds which are |
| 74 |
not defined in the performance states. |
| 75 |
|
| 76 |
The support of fine grain control is presented via sysfs attribute |
| 77 |
"fine_grain_control". If fine grain control is present, this attribute |
| 78 |
will show "1" otherwise "0". |
| 79 |
|
| 80 |
This sysfs attribute is presented in the same directory as performance states. |
| 81 |
|
| 82 |
ACPI Fan Performance Feedback |
| 83 |
============================= |
| 84 |
|
| 85 |
The optional _FST object provides status information for the fan device. |
| 86 |
This includes field to provide current fan speed in revolutions per minute |
| 87 |
at which the fan is rotating. |
| 88 |
|
| 89 |
This speed is presented in the sysfs using the attribute "fan_speed_rpm", |
| 90 |
in the same directory as performance states. |