| 1 |
User-Visible pam-afs-session Changes |
| 2 |
|
| 3 |
pam-afs-session 2.6 (2015-09-19) |
| 4 |
|
| 5 |
When pam_setcred is called with PAM_REINITIALIZE_CRED or |
| 6 |
PAM_REFRESH_CRED, don't set the PAM data item that says to skip a |
| 7 |
subsequent pam_open_session and delete tokens on pam_close_session. |
| 8 |
This fixes a problem with sudo when pam_setcred is enabled, since sudo |
| 9 |
first calls pam_setcred with PAM_REINITIALIZE_CRED and then opens a |
| 10 |
new session. The previous code would not create a new PAG for the new |
| 11 |
session and then would delete the caller's tokens after sudo |
| 12 |
completed. The new behavior is more conceptually correct, since |
| 13 |
reinitializing creds doesn't take ownership of the session, and |
| 14 |
therefore shouldn't mean deleting them on session close. |
| 15 |
|
| 16 |
Fix compilation failure on Solaris 11 and later with the built-in kafs |
| 17 |
implementation. |
| 18 |
|
| 19 |
Use the PATH_KRB5_CONFIG environment variable or command-line setting |
| 20 |
to configure instead of KRB5_CONFIG to get the path to krb5-config. |
| 21 |
The latter is used to point to an alternative krb5.conf file. |
| 22 |
|
| 23 |
Update to rra-c-util 5.8: |
| 24 |
|
| 25 |
* Improve robustness of PAM entry and exit handling. |
| 26 |
* Do not append a PAM error message if the status is PAM_SUCCESS. |
| 27 |
* Fix a memory leak in PAM logging. |
| 28 |
* Pass --deps to krb5-config except with --enable-reduced-depends. |
| 29 |
* Avoid calling krb5_get_error_message with a NULL context. |
| 30 |
* Use krb5/krb5.h if krb5.h is not present, for NetBSD portability. |
| 31 |
* Fix stripping of -I/usr/include from krb5-config output. |
| 32 |
* Use manual Kerberos library probing if lib or include paths given. |
| 33 |
* Do not assume string is nul-terminated in replacement strdup. |
| 34 |
* Avoid using local in the shell TAP library for Solaris portability. |
| 35 |
* Silence __attribute__ warnings on more compilers. |
| 36 |
* Add more __format__ annotations on various utility functions. |
| 37 |
* Adjust POD tests to handle multiple .. paths in build directory. |
| 38 |
|
| 39 |
Update to C TAP Harness 3.4: |
| 40 |
|
| 41 |
* Suppress plan and summary if bail is called before any tests run. |
| 42 |
* Only use feature-test macros when requested or built with gcc -ansi. |
| 43 |
* Drop is_double from the C TAP library to avoid requiring -lm. |
| 44 |
* Avoid using local in the shell libtap.sh library. |
| 45 |
* Silence __attribute__ warnings on more compilers. |
| 46 |
* runtests now frees all allocated resources on exit. |
| 47 |
* Fix runtests to honor -s even if BUILD and -b aren't given. |
| 48 |
* Fix segfault with an empty test list. |
| 49 |
|
| 50 |
pam-afs-session 2.5 (2011-07-25) |
| 51 |
|
| 52 |
Reset the SIGCHLD handler while spawning an external aklog program so |
| 53 |
that the application SIGCHLD handler isn't invoked when aklog exits. |
| 54 |
This unfortunately still means that there's a race condition that can |
| 55 |
cause children to be incorrectly handled if they exit while aklog is |
| 56 |
running, if the application's SIGCHLD handler is required. There is |
| 57 |
unfortunately no good general solution to this other than building |
| 58 |
against Heimdal and using the libkafs interface to obtain tokens |
| 59 |
instead of an external program. |
| 60 |
|
| 61 |
Default to nopag on Mac OS X, since the operating system doesn't have |
| 62 |
PAG support. |
| 63 |
|
| 64 |
Fix error handling when krb5_appdefault_string returns without setting |
| 65 |
the result string. Fixes a possible segfault during configuration |
| 66 |
parsing on Mac OS X 10.7. |
| 67 |
|
| 68 |
Update to rra-c-util 3.7: |
| 69 |
|
| 70 |
* Fail during configure if AFS headers are required and not found. |
| 71 |
* Add notices to all files copied over from rra-c-util. |
| 72 |
* Include strings.h for additional POSIX functions where found. |
| 73 |
* Fix detection of whether PAM uses const on FreeBSD. |
| 74 |
|
| 75 |
pam-afs-session 2.4 (2011-06-08) |
| 76 |
|
| 77 |
Fix a memory allocation and initialization bug in the previous release |
| 78 |
that could result in a free of unallocated memory. |
| 79 |
|
| 80 |
pam-afs-session 2.3 (2011-06-07) |
| 81 |
|
| 82 |
If there is no KRB5CCNAME environment variable set in the PAM |
| 83 |
environment but there is one set in the regular environment, still run |
| 84 |
aklog and use the KRB5CCNAME from the general environment. This |
| 85 |
provides correct behavior in cases such as password-less sudo with the |
| 86 |
KRB5CCNAME environment variable preserved. |
| 87 |
|
| 88 |
Update to rra-c-util 3.6: |
| 89 |
|
| 90 |
* Fix compilation error with --without-krb5. |
| 91 |
* Update flags for make warnings to GCC 4.6.1. |
| 92 |
|
| 93 |
Update to C TAP Harness 1.7: |
| 94 |
|
| 95 |
* Add a more complete usage message and a -h command-line flag. |
| 96 |
|
| 97 |
pam-afs-session 2.2 (2011-03-03) |
| 98 |
|
| 99 |
Stop returning PAM_IGNORE from pam_setcred if AFS is not available or |
| 100 |
if we're deleting credentials but the PAM module is configured not to |
| 101 |
delete tokens. Instead, return PAM_SUCCESS. This fixes problems with |
| 102 |
the Linux PAM library where returning PAM_IGNORE would cause |
| 103 |
pam_setcred to fail even if other modules succeeded. |
| 104 |
|
| 105 |
When using libkafs, close the ticket cache after obtaining tokens. |
| 106 |
Fixes a memory leak. |
| 107 |
|
| 108 |
Fix the error return statuses for pam_setcred. Previously, on error, |
| 109 |
it was returning PAM_SESSION_ERR, which is a return status that's only |
| 110 |
supposed to be used for pam_open_session and pam_close_session. |
| 111 |
Instead, return PAM_USER_UNKNOWN or PAM_CRED_ERR as appropriate. |
| 112 |
|
| 113 |
Update to rra-c-util 3.2: |
| 114 |
|
| 115 |
* Check if the string being duplicated is NULL in strndup replacement. |
| 116 |
|
| 117 |
pam-afs-session 2.1 (2011-01-23) |
| 118 |
|
| 119 |
The program setting can now include arguments to pass to the program |
| 120 |
to run to obtain tokens, separated by commas (or spaces or tabs if |
| 121 |
your PAM configuration syntax supports it). If program is set in |
| 122 |
krb5.conf, additional options can be specified separated by spaces. |
| 123 |
As a side effect, program paths containing spaces or commas will no |
| 124 |
longer work correctly since the text after the space or comma will be |
| 125 |
interpreted as an argument. Please let me know if this was a feature |
| 126 |
that you were using. |
| 127 |
|
| 128 |
Fix compilation of the pam_syslog and pam_vsyslog replacement |
| 129 |
functions for platforms whose PAM libraries lack those functions. |
| 130 |
|
| 131 |
Fix compilation of the embedded kafs layer for Mac OS X 10.6 and |
| 132 |
hopefully fix detection of whether AFS is present. Thanks, Andy |
| 133 |
Cobaugh. |
| 134 |
|
| 135 |
Fix broken GCC attribute markers that may have caused compilation |
| 136 |
problems with any non-GCC compiler. |
| 137 |
|
| 138 |
Add a replacement for strndup if the system C library doesn't provide |
| 139 |
the function (such as on Mac OS X). |
| 140 |
|
| 141 |
Document that "nopag" should be added to the configuration on Mac OS X |
| 142 |
where PAGs are not supported. |
| 143 |
|
| 144 |
Update to rra-c-util 3.1: |
| 145 |
|
| 146 |
* Include supplemental libraries in manual Kerberos library probes. |
| 147 |
* Avoid warnings when probing for ibm_svc/krb5_svc.h. |
| 148 |
|
| 149 |
pam-afs-session 2.0 (2010-12-29) |
| 150 |
|
| 151 |
If there is no PAG, create a new one and obtain tokens in pam_setcred |
| 152 |
and pam_open_session even if the module has already run. This works |
| 153 |
around destruction of the PAG on Linux by keyring initialization |
| 154 |
modules, which can otherwise be hard to avoid due to the ordering |
| 155 |
between the auth and session stacks. This support uses the |
| 156 |
VIOC_GETPAG AFS system call if it is available and falls back on |
| 157 |
analyzing the supplemental group list if it is not. |
| 158 |
|
| 159 |
Add untested support for the ioctl AFS system call methods on Mac OS X |
| 160 |
and Solaris 11 to the included kafs library, which is used if neither |
| 161 |
libkafs nor libkopenafs is available. |
| 162 |
|
| 163 |
Avoid returning an uninitialized value from pam_open_session when |
| 164 |
notokens is set. Thanks, Ian Ward Comfort. |
| 165 |
|
| 166 |
pam_close_session now removes the module data indicating that tokens |
| 167 |
were already obtained so that opening another session using the same |
| 168 |
PAM handle will work correctly. |
| 169 |
|
| 170 |
pam-afs-session is now built using Automake and Libtool to bring it |
| 171 |
more in line with other software packages. This means that it now |
| 172 |
relies on Libtool to know how to generate a loadable module rather |
| 173 |
than hand-configured linker rules. This may improve portability on |
| 174 |
some platforms and may hurt it on other platforms. |
| 175 |
|
| 176 |
The symbols exported by the PAM module are now limited to only the |
| 177 |
public API on all platforms where Libtool supports limiting symbol |
| 178 |
exports. |
| 179 |
|
| 180 |
On Linux, if configured with a prefix of /usr (rather than /usr/local, |
| 181 |
the default), the module will be installed into /lib/security (or |
| 182 |
/lib32/security or /lib64/security if they exist) rather than |
| 183 |
/usr/lib/security to match the default PAM configuration. |
| 184 |
|
| 185 |
The module is now installed under $libdir/security, rather than a |
| 186 |
lib32 or lib64 directory, except for the special case of /usr. To |
| 187 |
install into another lib32 or lib64 directory, use the --libdir option |
| 188 |
to configure. |
| 189 |
|
| 190 |
Fix a configure error when built --without-krb5. |
| 191 |
|
| 192 |
When debugging is enabled, log an exit status of PAM_IGNORE as ignore |
| 193 |
rather than failure. |
| 194 |
|
| 195 |
Update the embedded kafs code to rra-c-util 3.0, adding |
| 196 |
--with-libkafs-include, --with-libkafs-lib, --with-afs-include, and |
| 197 |
--with-afs-lib configure options for finer control. Remove obsolete |
| 198 |
--with-afs-headers configure option (use --with-afs-include instead). |
| 199 |
|
| 200 |
Add an initial test suite that tests basic functionality and some |
| 201 |
options. |
| 202 |
|
| 203 |
Update to rra-c-util 3.0: |
| 204 |
|
| 205 |
* Add --with-krb5-include and --with-krb5-lib configure options. |
| 206 |
* Don't break if the user clobbers CPPFLAGS at build time. |
| 207 |
* Fall back on manual probing if krb5-config results don't work. |
| 208 |
* Suppress error output from krb5-config probes. |
| 209 |
* Search for krb5-config in /usr/kerberos/bin for Red Hat systems. |
| 210 |
* Add support for the old Heimdal krb5_get_error_string interface. |
| 211 |
* Handle the bundled Heimdal on OpenBSD without a separate libroken. |
| 212 |
* Add portability to systems with a broken snprintf or vsnprintf. |
| 213 |
* Update make warnings flags for gcc 4.4. |
| 214 |
|
| 215 |
Update to C TAP Harness 1.6: |
| 216 |
|
| 217 |
* Flush standard error before results in the C TAP library. |
| 218 |
* Improve test failure output formatting in some edge cases. |
| 219 |
|
| 220 |
pam-afs-session 1.7 (2008-07-10) |
| 221 |
|
| 222 |
Return PAM_IGNORE instead of PAM_SUCCESS from all functions when AFS |
| 223 |
isn't available, and when functions are skipped due to the |
| 224 |
configuration. We would like to do this in pam_authenticate as well |
| 225 |
(it would be much safer), but there is a bug in (at least) Linux PAM |
| 226 |
0.99.7.1 (and probably earlier) that treats this as authentication |
| 227 |
failure if the module is configured with [default=done]. |
| 228 |
|
| 229 |
Fix Autoconf syntax error when probing for libkrb5support. Thanks, |
| 230 |
Mike Garrison. |
| 231 |
|
| 232 |
If KRB5_CONFIG was explicitly set in the environment, don't use a |
| 233 |
different krb5-config based on --with-krb5. If krb5-config isn't |
| 234 |
executable, don't use it. This allows one to force library probing by |
| 235 |
setting KRB5_CONFIG to point to a nonexistent file. |
| 236 |
|
| 237 |
Sanity-check the results of krb5-config before proceeding and error |
| 238 |
out in configure if they don't work. |
| 239 |
|
| 240 |
Set an explicit visibility of hidden for all internal functions at |
| 241 |
compile time if gcc is used to permit better optimization. Hide all |
| 242 |
functions except the official interfaces using a version script on |
| 243 |
Linux. This protects against leaking symbols into the application |
| 244 |
namespace and provides some mild optimization benefit. |
| 245 |
|
| 246 |
Fix the probing of PAM headers for const on Mac OS X. This will |
| 247 |
suppress some harmless compiler warnings there. Thanks, Markus |
| 248 |
Moeller. |
| 249 |
|
| 250 |
pam-afs-session 1.6 (2008-03-08) |
| 251 |
|
| 252 |
Correctly check the exit status of aklog and don't think acquiring |
| 253 |
tokens was successful when aklog failed. Thanks, Douglas Engert |
| 254 |
and Chaskiel Grundman. |
| 255 |
|
| 256 |
Build with _REENTRANT set for correct errno handling in threaded |
| 257 |
applications on Solaris. |
| 258 |
|
| 259 |
Build with Kerberos support by default if Kerberos libraries are |
| 260 |
found. To disable Kerberos support, pass --without-krb5 to |
| 261 |
configure. The option to specify the Kerberos library location is now |
| 262 |
--with-krb5, not --with-kerberos. |
| 263 |
|
| 264 |
Add support for AIX's bundled Kerberos. Thanks to Markus Moeller for |
| 265 |
the porting information. |
| 266 |
|
| 267 |
Define _ALL_SOURCE on AIX to get a prototype for vsnprintf. |
| 268 |
|
| 269 |
Add compiler and linker flags for AIX. Thanks, Thomas Williams. |
| 270 |
|
| 271 |
Try to determine whether the PAM headers use const in the prototypes |
| 272 |
of such things as pam_get_item and adjust accordingly. This should |
| 273 |
address compiler warnings on Solaris. Thanks, Markus Moeller. |
| 274 |
|
| 275 |
Add additional documentation of interactions with the native pam_krb5 |
| 276 |
on Solaris to README. pam_afs_session needs to be run from the auth |
| 277 |
group, not the session group, with at least some services when used |
| 278 |
with the Solaris pam_krb5. |
| 279 |
|
| 280 |
Document bad interactions with pam_keyinit on Linux in README. |
| 281 |
|
| 282 |
Add example PAM configurations for Debian, Red Hat, and Solaris based |
| 283 |
on Stanford's Linux configurations and a Solaris configuration from |
| 284 |
Maciej Malek. Hopefully I didn't break anything while merging |
| 285 |
examples. |
| 286 |
|
| 287 |
pam-afs-session 1.5 (2007-09-30) |
| 288 |
|
| 289 |
Free the results of pam_getenvlist and the command-line argument for |
| 290 |
aklog properly. |
| 291 |
|
| 292 |
Don't de-reference a NULL pointer if memory allocation fails while |
| 293 |
parsing PAM options. Thanks, Jason D. McCormick. |
| 294 |
|
| 295 |
Change lib to lib64 on x86_64 Linux to allow for the magical $ISA |
| 296 |
parameter in Red Hat's PAM configuration. Hopefully this won't cause |
| 297 |
problems elsewhere. |
| 298 |
|
| 299 |
Fix linker determination when using gcc on HP-UX. |
| 300 |
|
| 301 |
Add additional debugging output when acquiring or destroying tokens. |
| 302 |
|
| 303 |
pam-afs-session 1.4 (2007-05-10) |
| 304 |
|
| 305 |
Added the afs_cells configuration option which specifies the list of |
| 306 |
cells in which to get tokens. |
| 307 |
|
| 308 |
Ported to HP-UX. HP-UX's PAM libraries do not support a separate |
| 309 |
environment used for the new session, so manipulate the regular |
| 310 |
environment instead. Thanks to Joe Buehler for the port. |
| 311 |
|
| 312 |
Document using the module with Mac OS X, now that it's been confirmed |
| 313 |
to work with sshd on that platform. |
| 314 |
|
| 315 |
Support DESTDIR for make install. |
| 316 |
|
| 317 |
pam-afs-session 1.3 (2007-04-11) |
| 318 |
|
| 319 |
Add a notokens configuration option which, when set, tells the module |
| 320 |
to only create a PAG and not to try to obtain tokens. Based on a |
| 321 |
patch from Jason McCormick. |
| 322 |
|
| 323 |
When forking an external aklog, also close standard input and reopen |
| 324 |
it to /dev/null. Normal aklog programs won't try to read from |
| 325 |
standard input, but don't connect their standard input to any stray |
| 326 |
file descriptor inherited by the process just in case. |
| 327 |
|
| 328 |
Make --with-kerberos and --without-libkafs work properly together. |
| 329 |
|
| 330 |
Improve diagnostics around token acquisition. Thanks, Jeff Blaine. |
| 331 |
|
| 332 |
pam-afs-session 1.2 (2007-03-24) |
| 333 |
|
| 334 |
Add support for calling the Heimdal libkafs functions for obtaining |
| 335 |
AFS tokens rather than running an external aklog program. This |
| 336 |
support is the default if libkafs and the Kerberos v5 functions were |
| 337 |
found at build time and --with-kerberos was passed to configure. |
| 338 |
|
| 339 |
When retain_after_close is set, don't destroy tokens on DELETE_CRED |
| 340 |
either. OpenSSH calls this when the session dies. Thanks to Thomas |
| 341 |
Kula for the patch. |
| 342 |
|
| 343 |
Don't fail during configure if Kerberos libraries couldn't be found |
| 344 |
unless --with-kerberos was explicitly requested. |
| 345 |
|
| 346 |
Produce better error messages when Kerberos operations fail. |
| 347 |
|
| 348 |
Added --without-libkafs to force using the internal AFS syscall |
| 349 |
implementation and not link with libkafs or libkopenafs, even if the |
| 350 |
libraries are available. |
| 351 |
|
| 352 |
Fix installation of the man page when building outside of the source |
| 353 |
directory. |
| 354 |
|
| 355 |
pam-afs-session 1.1 (2006-12-18) |
| 356 |
|
| 357 |
Add optional support for linking with the Kerberos libraries and |
| 358 |
obtaining configuration from the system krb5.conf file. |
| 359 |
|
| 360 |
Add the kdestroy option which, if built with Kerberos support, removes |
| 361 |
the ticket cache after successfully running aklog. |
| 362 |
|
| 363 |
Actually link with libkafs if we detect it at configure time. |
| 364 |
|
| 365 |
Fix a bug in reporting unknown options. |
| 366 |
|
| 367 |
pam-afs-session 1.0 (2006-12-06) |
| 368 |
|
| 369 |
Add --with-afs-headers to configure so that the user doesn't have to |
| 370 |
know the right syntax for setting CPPFLAGS. |
| 371 |
|
| 372 |
When using gcc, link with -fPIC as well as compiling with it per the |
| 373 |
gcc documentation. |
| 374 |
|
| 375 |
Add additional configuration information for Solaris. |
| 376 |
|
| 377 |
Link explicitly against the Kerberos libraries by default when linking |
| 378 |
with libkafs, only relying on transitive shared library dependencies |
| 379 |
when --enable-reduced-depends is passed to configure. This should not |
| 380 |
be necessary on any of the currently supported platforms but may make |
| 381 |
porting easier to systems with deficient shared library support. |
| 382 |
|
| 383 |
Support building on Mac OS X. The resulting module isn't tested and |
| 384 |
may not work. Thanks, Sebastian Hagedorn. |
| 385 |
|
| 386 |
pam-afs-session 0.3 (2006-11-28) |
| 387 |
|
| 388 |
Compile in a default path to aklog if configure can find it on the |
| 389 |
path or if told the path with the --with-aklog option. In this case, |
| 390 |
program is now optional in the PAM configuration. |
| 391 |
|
| 392 |
Use __func__ instead of __FUNCTION__ and provide a fallback for older |
| 393 |
versions of gcc and for systems that support neither. Should fix |
| 394 |
compilation issues with Sun's C compiler. |
| 395 |
|
| 396 |
On platforms where we know the appropriate compiler flags, try to |
| 397 |
build the module so that symbols are resolved within the module in |
| 398 |
preference to any externally available symbols. Also add the |
| 399 |
hopefully correct compiler flags for Sun's C compiler. |
| 400 |
|
| 401 |
pam-afs-session 0.2 (2006-11-17) |
| 402 |
|
| 403 |
Add a man page. |
| 404 |
|
| 405 |
Add a fallback implementation of the AFS system call for platforms |
| 406 |
that use syscall, and add the signal handler protection for the |
| 407 |
k_hasafs probe for those platforms. The PAM module should now build |
| 408 |
on Solaris without requiring libkafs or libkopenafs. |
| 409 |
|
| 410 |
Add an always_aklog option saying to always run aklog even if the user |
| 411 |
doesn't appear to have a ticket cache. |
| 412 |
|
| 413 |
Add an aklog_homedir option saying to pass -p <homedir> to aklog. |
| 414 |
This will obtain tokens in whatever AFS cells are required to access |
| 415 |
the user's home directory and can be used when something more complex |
| 416 |
than obtaining tokens in the local default cell is needed. |
| 417 |
|
| 418 |
Reopen stdout and stderr to /dev/null before running aklog so that any |
| 419 |
error messages from aklog don't confuse the calling program. |
| 420 |
|
| 421 |
Log a message if aklog fails, but return PAM_SUCCESS from the module |
| 422 |
whether aklog succeeded or not. If we fail, the user may be kicked |
| 423 |
out of their session even though AFS tokens may not be necessary and |
| 424 |
only obtained as a convenience. Obtaining a PAG is still required. |
| 425 |
|
| 426 |
pam-afs-session 0.1 (2006-11-10) |
| 427 |
|
| 428 |
Initial beta release. |
| 429 |
|
| 430 |
Supports libkafs and libkopenafs in theory, but only the internal |
| 431 |
syscall layer has been tested. No man page yet, and the program to |
| 432 |
run to obtain tokens must be specified in the PAM options. |