Debian Codegraph @

bin/h4vers

raw
1 #! /bin/sh
2 perl -x -S $0 "$@"
3 exit
4
5 #! perl
6 require 5.003;
7 use strict;
8
9 # Copyright by The HDF Group.
10 # Copyright by the Board of Trustees of the University of Illinois.
11 # All rights reserved.
12 #
13 # This file is part of HDF. The full HDF copyright notice, including
14 # terms governing use, modification, and redistribution, is contained in
15 # the COPYING file, which can be found at the root of the source code
16 # distribution tree, or in https://support.hdfgroup.org/ftp/HDF/releases/.
17 # If you do not have access to either file, you may request a copy from
18 # [email protected].
19 #
20 #
21 # Robb Matzke <[email protected]>
22 # 17 July 1998
23 #
24 # HDF4 alterations
25 # Larry Knox <[email protected]>
26 # 25 September 2009
27
28 ### Purpose
29 # Increments the hdf4 version number by changing the value of
30 # constants in the hdf/src/hfile.h file. The new version number is
31 # printed on the standard output. An alternate source file name can be
32 # specified as an argument. In any case, the original file is saved
33 # by appending a tilde `~' to the name.
34
35 ### Usage:
36 # h4vers [OPTIONS] [FILE]
37
38 # Without options this program only displays the current version and
39 # doesn't modify any files or create backups. The default is to print
40 # The space and parentheses around A are only printed if A is not empty.
41 #
42 # The `-s VERSION' switch will set the version as specified. If the
43 # string contains a dotted triple then it will be used as the version
44 # number, otherwise up to three numbers will be read from the end of
45 # the string and used as the major version, minor version, and release
46 # number. If any numbers are missing then zero is assumed. This
47 # allows versions to be specified like `-s "version 4.2 release 4"' or
48 # `-s hdf4-4.2.4.tar.bz2'. If the new version is less than the old
49 # version then a warning message is generated on standard error. The
50 # annotation string, A, is set only if it appears immediately after the
51 # third number, separated by a dash (e.g., `1.2.3-pre1') or in parentheses
52 # (e.g., `version 1.2 release 3 (pre1)').
53 #
54 # The `-i [major|minor|release|annot|last]' option increments the major
55 # number, minor number, release number, or annotation string. The `last'
56 # switch increments the annotation string if present, otherwise the
57 # release number. If the release number is incremented then the annotation
58 # string is cleared. If the minor number is incremented then the release
59 # number is set to zero and the annotation string is cleared; if the major
60 # number is incremented then the minor and release numbers are set to zero
61 # and the annotation string is cleared.
62 #
63 # If a file is specified then that file is used instead of
64 # ./hfile.h or ./hdf/src/hfile.h.
65 #
66 # If the version number is changed (either `-s' or `-i' was used on
67 # the command line) then the first line of the README.md and
68 # release_notes/RELEASE.txt two levels above the hfile.h file are also
69 # modified so it looks something like: This is hdf4-1.2.3-pre1 currently
70 # under development. The AC_INIT macro in configure.in will also change
71 # in this case to be something like: AC_INIT([HDF4], [hdf4-1.2.3-pre1],
72 # [[email protected]]).
73 #
74 #Following paragraph from h5vers does not apply for HDF4?
75 # Whenever the version changes, this script will increment the revision
76 # field in HDF4's libtool shared library version in config/lt_vers.am,
77 # which is included in src/Makefile.am. Incrementing the revision field
78 # indicates that the source code has changed since the last version
79 # (which it probably has).
80 ##############################################################################
81
82 sub getvers {
83 local ($_) = @_;
84 my (@vers);
85
86 ($vers[0]) = /^\#\s*define\s+LIBVER_MAJOR\s+(\d+)/m;
87 ($vers[1]) = /^\#\s*define\s+LIBVER_MINOR\s+(\d+)/m;
88 ($vers[2]) = /^\#\s*define\s+LIBVER_RELEASE\s+(\d+)/m;
89 ($vers[3]) = /^\#\s*define\s+LIBVER_SUBRELEASE\s+\"([^\"]*)\"/m;
90 ($vers[4]) = /^\#\s*define\s+LIBVER_STRING\s+\"([^\"]*\d+)\"/m;
91 #The above gets the entire string, below would get just the date portion.
92 #($vers[4]) = /^\#\s*define\s+LIBVER_STRING\s+\"[^\"]*,(.*,\s+\d+)\"/m;
93 return @vers;
94 }
95
96 sub setvers {
97 my ($contents, @vers) = @_;
98 my @months = ('January', 'February', 'March', 'April', 'May', 'June', 'July',
99 'August', 'September', 'October', 'November', 'December');
100 my @date = (localtime(time));
101 $_[0] =~ s/^(\#\s*define\s+LIBVER_MAJOR\s+)\d+/$1$vers[0]/m;
102 $_[0] =~ s/^(\#\s*define\s+LIBVER_MINOR\s+)\d+/$1$vers[1]/m;
103 $_[0] =~ s/^(\#\s*define\s+LIBVER_RELEASE\s+)\d+/$1$vers[2]/m;
104 $_[0] =~ s/^(\#\s*define\s+LIBVER_SUBRELEASE\s+\")[^\"]*/$1$vers[3]/m;
105 $_[0] =~ s/^(\#\s*define\s+LIBVER_STRING\s+\")[^\"]*/
106 sprintf("%sHDF Version %d.%d Release %d%s%s, %s %d, %d", $1, @vers[0,1,2],
107 $vers[3]?"-":"", $vers[3], $months[@date[4]], @date[3], 1900+@date[5])/me;
108 my $stringlength = 25 + 32 + length $months[@date[4]] + 2 + 6;
109 die "Version string too long: $stringlength characters." unless $stringlength < 81;
110 #printf("HDF Version %d.%d Release %d%s%s, %s %d, %d\n", @vers[0,1,2],
111 # $vers[3]?"-":"", $vers[3], $months[@date[4]], @date[3], 1900+@date[5]);
112 return $_[0];
113 }
114
115 sub usage {
116 my ($prog) = $0 =~ /([^\/]+)$/;
117 print STDERR <<EOF;
118 Usage: $prog [OPTS] [FILE]
119 -i major|minor|release|annot
120 Increment specified version component and set following components
121 to zero.
122 -s VERSION
123 Set the version as specified. The version number can be embedded in
124 some other string such as \"hdf4-1.1.0-pre1.tar.bz2\" or even
125 \"this is HDF4 library version 1.1 release 0 (pre1)\" for convenience.
126 -v
127 Instead of displaying only a dotted triple version number a line such
128 as \"version 1.1 release 0 (pre1)\" will be printed.
129 FILE
130 The name of the file that contains version information. This is
131 seldom necessary since files hfile.h, hdf/src/hfile.h,
132 src/hfile.h, and ../hdf/src/hfile.h are automatically checked.
133 EOF
134 exit 1;
135 }
136
137 # Parse arguments
138 my ($verbose, $set, $inc, $file, $rc);
139 my (@files) = ("hdf/src/hfile.h", "../hdf/src/hfile.h", "src/hfile.h", "hfile.h");
140 while ($_ = shift) {
141 $_ eq "-s" && do {
142 die "-s switch needs a version number\n" unless @ARGV;
143 $set = shift;
144 next;
145 };
146
147 $_ eq "-i" && do {
148 if (@ARGV && $ARGV[0]=~/^(major|minor|release|annot)$/) {
149 $inc = shift;
150 } else {
151 $inc = "last";
152 }
153 next;
154 };
155
156 $_ eq "-v" && do {
157 $verbose = 1;
158 next;
159 };
160
161 /^-(h|\?|-?help)$/ && usage;
162 /^-/ && die "unrecognized option: $_\n";
163 die "only one file name can be specified\n" if $file;
164 $file = $_;
165 }
166 die "mutually exclusive options given\n" if $set && $inc;
167
168 #print "file is $file.\n";
169 #print "File array is ", @files;
170
171 # Determine file to use as hfile.h, README.md,
172 # release_notes/RELEASE.txt, configure.in,
173 # and config/cmake/scripts/HDF4config.cmake.
174 # The paths to README.md, release_notes/RELEASE.txt, configure.ac,
175 # and config/cmake/scripts/HDF4config.cmake
176 # files are always from the directory two levels above hfile.h.
177 unless ($file) {
178 for (@files) {
179 ($file=$_,last) if -f $_;
180 }
181 }
182 #print "file is $file.\n";
183
184 die "unable to find source file $file\n" unless defined $file;
185 die "unable to read file: $file\n" unless -r $file;
186 # config/lt_vers.am - HDF4 doesn't have this at present
187 #my $LT_VERS = $file;
188 #$LT_VERS =~ s/[^\/]*$/..\/config\/lt_vers.am/;
189 #die "unable to read file: $LT_VERS\n" unless -r $file;
190 # config/cmake/scripts/HDF4config.cmake
191 my $HDF4CONFIGCMAKE = $file;
192 $HDF4CONFIGCMAKE =~ s/[^\/]*$/..\/..\/config\/cmake\/scripts\/HDF4config.cmake/;
193 die "unable to read file: $HDF4CONFIGCMAKE\n" unless -r $file;
194 # java/src/hdf/hdflib/HDFLibrary.java
195 my $H4_JAVA = $file;
196 $H4_JAVA =~ s/[^\/]*$/..\/..\/java\/src\/hdf\/hdflib\/HDFLibrary.java/;
197 die "unable to read file: $H4_JAVA\n" unless -r $file;
198 # java/test/TestH4.java
199 my $H4_TESTJAVA = $file;
200 $H4_TESTJAVA =~ s/[^\/]*$/..\/..\/java\/test\/TestH4.java/;
201 die "unable to read file: $H4_TESTJAVA\n" unless -r $file;
202 # README.md
203 my $README = $file;
204 $README =~ s/[^\/]*$/..\/..\/README.md/;
205 die "unable to read file: $README\n" unless -r $file;
206 # release_notes/RELEASE.txt
207 my $RELEASE = $file;
208 $RELEASE =~ s/[^\/]*$/..\/..\/release_notes\/RELEASE.txt/;
209 die "unable to read file: $RELEASE\n" unless -r $file;
210 #print $RELEASE, "\n";
211 # configure.in
212 my $CONFIGURE = $file;
213 $CONFIGURE =~ s/[^\/]*$/..\/..\/configure.ac/;
214 die "unable to read file: $CONFIGURE\n" unless -r $file;
215
216 # Get the current version number.
217 open FILE, $file or die "unable to open $file: $!\n";
218 my ($contents) = join "", <FILE>;
219 close FILE;
220 my (@curver) = getvers $contents;
221
222 #print "Contents: $contents\n";
223
224 #print "curver", @curver, "\n";
225
226 # Determine the new version number.
227 my @newver; #new version
228 if ($set) {
229 if ($set =~ /(\d+)\.(\d+)\.(\d+)(-([\da-zA-Z]\w*))?/) {
230 @newver = ($1, $2, $3, $5);
231 } elsif ($set =~ /(\d+)\D+(\d+)\D+(\d+)(\s*\(([a-zA-Z]\w*)\))?\D*$/) {
232 @newver = ($1, $2, $3, $5);
233 } elsif ($set =~ /(\d+)\D+(\d+)\D*$/) {
234 @newver = ($1, $2, 0, "");
235 } elsif ($set =~ /(\d+)\D*$/) {
236 @newver = ($1, 0, 0, "");
237 } else {
238 die "illegal version number specified: $set\n";
239 }
240 } elsif ($inc) {
241 $inc = $curver[3] eq "" ? 'release' : 'annot' if $inc eq 'last';
242 if ($inc eq "major") {
243 $newver[0] = $curver[0]+1;
244 @newver[1,2,3] = (0,0,"");
245 } elsif ($inc eq "minor") {
246 $newver[0] = $curver[0];
247 $newver[1] = $curver[1]+1;
248 @newver[2,3] = (0,"");
249 } elsif ($inc eq "release") {
250 @newver[0,1] = @curver[0,1];
251 $newver[2] = $curver[2]+1;
252 $newver[3] = "";
253 } elsif ($inc eq "annot") {
254 @newver[0,1,2] = @curver[0,1,2];
255 $newver[3] = $curver[3];
256 $newver[3] =~ s/(\d+)\D*$/$1+1/e or
257 die "Annotation \"".$newver[3]."\" cannot be incremented.\n";
258 } else {
259 die "unknown increment field: $inc\n";
260 }
261 } else {
262 # Nothing to do but print result
263 $README = "";
264 $RELEASE = "";
265 $CONFIGURE = "";
266 $HDF4CONFIGCMAKE = "";
267 $H4_JAVA = "";
268 $H4_TESTJAVA = "";
269 @newver = @curver;
270 }
271
272 # Note if the version increased or decreased
273 my $version_increased="";
274 # Print a warning if the version got smaller (don't check annot field)
275 if ($newver[0]*1000000 + $newver[1]*1000 + $newver[2] <
276 $curver[0]*1000000 + $curver[1]*1000 + $curver[2]) {
277 printf STDERR "Warning: version decreased from %d.%d.%d to %d.%d.%d\n",
278 @curver[0,1,2], @newver[0,1,2];
279 }
280 if ($newver[0]*1000000 + $newver[1]*1000 + $newver[2] >
281 $curver[0]*1000000 + $curver[1]*1000 + $curver[2]) {
282 $version_increased="true";
283 }
284
285 # Update the version number if it changed.
286 if ($newver[0]!=$curver[0] ||
287 $newver[1]!=$curver[1] ||
288 $newver[2]!=$curver[2] ||
289 $newver[3]ne$curver[3]) {
290 setvers $contents, @newver or die "unable to set version\n";
291 rename $file, "$file~" or die "unable to save backup file\n";
292 open FILE, ">$file" or die "unable to open $file but backup saved!\n";
293 print FILE $contents;
294 close FILE;
295 }
296
297 # Update the libtool shared library version in src/Makefile.am if
298 # the version number has increased.
299 #if ($LT_VERS && $version_increased) {
300 # open FILE, $LT_VERS or die "$LT_VERS: $!\n";
301 # my ($contentsy) = join "", <FILE>;
302 # close FILE;
303
304 # local($_) = $contentsy;
305
306 # my ($lt_revision) = /^LT_VERS_REVISION\s*=\s*(\d+)/m;
307 # my $new_lt_revision = $lt_revision+1;
308 # ($contentsy) =~ s/^(LT_VERS_REVISION\s*=\s*)\d+/$1$new_lt_revision/m;
309
310 # open FILE, ">$LT_VERS" or die "$LT_VERS: $!\n";
311 # print FILE $contentsy;
312 # close FILE;
313 #}
314
315 # Update the README file
316 if ($README) {
317 open FILE, $README or die "$README: $!\n";
318 my @contents = <FILE>;
319 close FILE;
320 $contents[0] = sprintf("HDF version %d.%d.%d%s %s",
321 @newver[0,1,2],
322 $newver[3] eq "" ? "" : "-".$newver[3],
323 "currently under development\n");
324 open FILE, ">$README" or die "$README: $!\n";
325 print FILE @contents;
326 close FILE;
327 }
328
329 # Update the release_notes/RELEASE.txt file
330 if ($RELEASE) {
331 open FILE, $RELEASE or die "$RELEASE: $!\n";
332 my @contents = <FILE>;
333 close FILE;
334 $contents[0] = sprintf("HDF version %d.%d.%d%s %s",
335 @newver[0,1,2],
336 $newver[3] eq "" ? "" : "-".$newver[3],
337 "currently under development\n");
338 open FILE, ">$RELEASE" or die "$RELEASE: $!\n";
339 print FILE @contents;
340 close FILE;
341 }
342
343 # Update the config/cmake/scripts/HDF4config.cmake file
344 if ($HDF4CONFIGCMAKE) {
345 my $data = read_file($HDF4CONFIGCMAKE);
346 # my $sub_rel_ver_str = "";
347 my $sub_rel_ver_str = (
348 $newver[3] eq ""
349 ? sprintf("\"%s\"", "")
350 : sprintf("\"%s\"", "-".$newver[3])
351 );
352 my $version_string = sprintf("\"%d.%d.%d\"", @newver[0,1,2]);
353
354 $data =~ s/set \(CTEST_SOURCE_VERSION .*\)/set \(CTEST_SOURCE_VERSION $version_string\)/;
355 $data =~ s/set \(CTEST_SOURCE_VERSEXT .*\)/set \(CTEST_SOURCE_VERSEXT $sub_rel_ver_str\)/;
356
357 write_file($HDF4CONFIGCMAKE, $data);
358 }
359
360 # Update the java/src/hdf/hdflib/HDFLibrary.java file
361 if ($H4_JAVA) {
362 my $data = read_file($H4_JAVA);
363 my $version_string = sprintf("%d.%d.%d", @newver[0,1,2]);
364
365 $data =~ s/ private final static String JHI_VERSION = "\d*.\d*.\d*";/ private final static String JHI_VERSION = "$version_string";/;
366
367 write_file($H4_JAVA, $data);
368 }
369
370 # Update the java/test/TestH4.java file
371 if ($H4_TESTJAVA) {
372 my $data = read_file($H4_TESTJAVA);
373 my $version_string = sprintf("%d, %d, %d", @newver[0,1,2]);
374
375 $data =~ s/ int LIB_VERSION\[\] = \{.*\};/ int LIB_VERSION\[\] = \{$version_string\};/;
376
377 write_file($H4_TESTJAVA, $data);
378 }
379
380 # Update the man/hdf.1 file
381 # There are currently 2 occurrences of the version string in the man/hdf.1 file.
382 # Since they aren't the top line of the file we search rewrite the file line by
383 # line, searching for the current major.minor.release version string, and replacing
384 # it with the new one. In case someone changes the version string manually or it
385 # otherwise gets out of sync, or another match is found that should not be updated,
386 # we will track the changes in this file, issue an error message and exit at if
387 # the number of changes is different than the 2 expected.
388
389 # helper function to read the file for updating
390 # config/cmake/scripts/HDF4Config.cmake and
391 # java/src/hdf/hdflib/HDFLibrary.java files.
392 # The version string in those files is not at the top, so the string replacement
393 # is not for the first line, and reading/writing the entire file as one string
394 # facilitates the substring replacement.
395 sub read_file {
396 my ($filename) = @_;
397
398 open my $in, $filename or die "Could not open '$filename' for reading $!";
399 local $/ = undef;
400 my $all = <$in>;
401 close $in;
402
403 return $all;
404 }
405
406 # helper function to write the file for updating
407 # config/cmake/scripts/HDF4config.cmake and
408 # java/src/hdf/hdflib/HDFLibrary.java files.
409 sub write_file {
410 my ($filename, $content) = @_;
411
412 open my $out, ">$filename" or die "Could not open '$filename' for writing $!";;
413 print $out $content;
414 close $out;
415
416 return;
417 }
418
419
420 sub gen_configure {
421 my ($name, $conf) = @_;
422
423 open FILE, $conf or die "$conf: $!\n";
424 my @contents = <FILE>;
425 close FILE;
426
427 for (my $i = 0; $i < $#contents; ++$i) {
428 if ($contents[$i] =~ /^AC_INIT/) {
429 $contents[$i] = sprintf("AC_INIT([$name], [%d.%d.%d%s], [help\@hdfgroup.org])\n",
430 @newver[0,1,2],
431 $newver[3] eq "" ? "" : "-".$newver[3]);
432 last;
433 }
434 }
435
436 open FILE, ">$conf" or die "$conf: $!\n";
437 print FILE @contents;
438 close FILE;
439
440 $conf =~ /^(.*?)\/?configure.ac$/;
441
442 if ($1) {
443 $rc = system("cd $1 && ./autogen.sh >/dev/null 2>/dev/null && rm -rf autom4te.cache");
444 } else {
445 $rc = system("./autogen.sh >/dev/null 2>/dev/null && rm -rf autom4te.cache");
446 }
447 if ($rc) {
448 printf("./autogen.sh failed with exit code %d. Aborted.\n", $rc);
449 exit 1;
450 }
451 }
452
453 # Update the configure.ac files and regenerate them
454 gen_configure("HDF", $CONFIGURE) if $CONFIGURE;
455
456 sub gen_h4pubconf {
457 my ($name, $pubconf, @vers) = @_;
458
459 my $namelc = lc($name);
460 my $nameuc = uc($name);
461
462 open FILE, $pubconf or die "$pubconf: $!\n";
463 my @contents = <FILE>;
464 close FILE;
465
466 for (my $i = 0; $i < $#contents; ++$i) {
467 if ($contents[$i] =~ /\#\s*define\s+H4_PACKAGE\s+/) {
468 $contents[$i] = "\#define H4_PACKAGE \"$namelc\"\n";
469 } elsif ($contents[$i] =~ /\#\s*define\s+H4_PACKAGE_NAME\s+/) {
470 $contents[$i] = "\#define H4_PACKAGE_NAME \"$nameuc\"\n";
471 } elsif ($contents[$i] =~ /\#\s*define\s+H4_PACKAGE_STRING\s+/) {
472 $contents[$i] = sprintf("\#define H4_PACKAGE_STRING \"$nameuc %d.%d.%d%s\"\n",
473 @vers[0,1,2],
474 $newver[3] eq "" ? "" : "-".$newver[3]);
475 } elsif ($contents[$i] =~ /\#\s*define\s+H4_PACKAGE_TARNAME\s+/) {
476 $contents[$i] = "\#define H4_PACKAGE_TARNAME \"$namelc\"\n";
477 } elsif ($contents[$i] =~ /\#\s*define\s+H4_PACKAGE_VERSION\s+/) {
478 $contents[$i] = sprintf("\#define H4_PACKAGE_VERSION \"%d.%d.%d%s\"\n",
479 @vers[0,1,2],
480 $newver[3] eq "" ? "" : "-".$newver[3]);
481 } elsif ($contents[$i] =~ /\#\s*define\s+H4_VERSION\s+/) {
482 $contents[$i] = sprintf("\#define H4_VERSION \"%d.%d.%d%s\"\n",
483 @vers[0,1,2],
484 $newver[3] eq "" ? "" : "-".$newver[3]);
485 }
486 }
487
488 open FILE, ">$pubconf" or die "$pubconf: $!\n";
489 print FILE @contents;
490 close FILE;
491 }
492
493 # Print the new version number
494 if ($verbose) {
495 #printf("Version %d.%d Release %d%s\n", @newver[0,1,2],
496 # $newver[3] eq "" ? "" : " (".$newver[3].")");
497 printf("%s\n", $newver[4]);
498 } else {
499 printf("%d.%d.%d%s\n", @newver[0,1,2],
500 $newver[3] eq "" ? "" : "-".$newver[3]);
501 }
502
503 exit 0;
504
505 # Because the first line of this file looks like a Bourne shell script, we
506 # must tell XEmacs explicitly that this is really a perl script.
507 #
508 # Local Variables:
509 # mode:perl
510 # End: