| 1 |
Device-USB-PCSensor-HidTEMPer version 0.04 |
| 2 |
========================================== |
| 3 |
|
| 4 |
This module contains an interface to the PCSensor HidTEMPer and PCSensor |
| 5 |
HidTEMPerNTC temperature sensors. There are also the common functions for the |
| 6 |
device itself (Device) and the sensors (Sensor) laying the grounds for other |
| 7 |
HidTEMPer versions to be added later on. |
| 8 |
|
| 9 |
The current temperature can be returned either using the Celsius |
| 10 |
scale or the Fahrenheit scale. |
| 11 |
|
| 12 |
WARNING |
| 13 |
|
| 14 |
The results returned from this code needs to undergo more testing. If the |
| 15 |
code used to write to the device is not used with extreme care it may |
| 16 |
destroy the device. |
| 17 |
|
| 18 |
TODO |
| 19 |
|
| 20 |
Please contact me if you find anything to be missing. |
| 21 |
|
| 22 |
INSTALLATION |
| 23 |
|
| 24 |
To install this module type the following: |
| 25 |
|
| 26 |
perl Makefile.PL |
| 27 |
make |
| 28 |
make test |
| 29 |
make install |
| 30 |
|
| 31 |
DEPENDENCIES |
| 32 |
|
| 33 |
This modules uses the following other modules: |
| 34 |
|
| 35 |
use Carp |
| 36 |
use Device::USB |
| 37 |
use Device::USB::Device |
| 38 |
use Time::HiRes qw / sleep / |
| 39 |
|
| 40 |
This module uses the strict and warning pragmas. |
| 41 |
|
| 42 |
DEVICE COMMANDS |
| 43 |
|
| 44 |
Get information from the device: |
| 45 |
|
| 46 |
Command: 0x52 |
| 47 |
Returns 8 bytes of interest: |
| 48 |
1) Unknown |
| 49 |
2) Device ID |
| 50 |
3) Inner calibration |
| 51 |
4) Inner calibration |
| 52 |
5) Outer calibration |
| 53 |
6) Outer calibration |
| 54 |
7) unknown |
| 55 |
8) unknown |
| 56 |
|
| 57 |
Command: 0x61 |
| 58 |
Set gain value, the command equals the gain to be set, 0x61, 0x62....0x68 |
| 59 |
|
| 60 |
Command: 0x53 or 0x54 depending on device and sensor |
| 61 |
Returns 3 bytes of value |
| 62 |
1) Primary value |
| 63 |
2) Decimal value |
| 64 |
3) unknown |
| 65 |
|
| 66 |
Command: 0x41 |
| 67 |
Returns 3 bytes of value |
| 68 |
1) Part one of the float number |
| 69 |
2) Part two of the float number |
| 70 |
3) Part three of the float number |
| 71 |
|
| 72 |
Command: 0x43 |
| 73 |
Set configuration of the device to 0 |
| 74 |
|
| 75 |
ACKNOWLEDGEMENTS |
| 76 |
|
| 77 |
Thanks to Daniel Fahlgren for updating different commands. |
| 78 |
|
| 79 |
COPYRIGHT AND LICENSE |
| 80 |
|
| 81 |
Copyright (c) 2010-2011 Magnus Sulland |
| 82 |
|
| 83 |
This program is free software; you can redistribute it and/or modify it |
| 84 |
under the same terms as Perl itself. |