| 1 |
/*! |
| 2 |
Provides routines for interpolating capture group references. |
| 3 |
|
| 4 |
That is, if a replacement string contains references like `$foo` or `${foo1}`, |
| 5 |
then they are replaced with the corresponding capture values for the groups |
| 6 |
named `foo` and `foo1`, respectively. Similarly, syntax like `$1` and `${1}` |
| 7 |
is supported as well, with `1` corresponding to a capture group index and not |
| 8 |
a name. |
| 9 |
|
| 10 |
This module provides the free functions [`string`] and [`bytes`], which |
| 11 |
interpolate Rust Unicode strings and byte strings, respectively. |
| 12 |
|
| 13 |
# Format |
| 14 |
|
| 15 |
These routines support two different kinds of capture references: unbraced and |
| 16 |
braced. |
| 17 |
|
| 18 |
For the unbraced format, the format supported is `$ref` where `name` can be |
| 19 |
any character in the class `[0-9A-Za-z_]`. `ref` is always the longest |
| 20 |
possible parse. So for example, `$1a` corresponds to the capture group named |
| 21 |
`1a` and not the capture group at index `1`. If `ref` matches `^[0-9]+$`, then |
| 22 |
it is treated as a capture group index itself and not a name. |
| 23 |
|
| 24 |
For the braced format, the format supported is `${ref}` where `ref` can be any |
| 25 |
sequence of bytes except for `}`. If no closing brace occurs, then it is not |
| 26 |
considered a capture reference. As with the unbraced format, if `ref` matches |
| 27 |
`^[0-9]+$`, then it is treated as a capture group index and not a name. |
| 28 |
|
| 29 |
The braced format is useful for exerting precise control over the name of the |
| 30 |
capture reference. For example, `${1}a` corresponds to the capture group |
| 31 |
reference `1` followed by the letter `a`, where as `$1a` (as mentioned above) |
| 32 |
corresponds to the capture group reference `1a`. The braced format is also |
| 33 |
useful for expressing capture group names that use characters not supported by |
| 34 |
the unbraced format. For example, `${foo[bar].baz}` refers to the capture group |
| 35 |
named `foo[bar].baz`. |
| 36 |
|
| 37 |
If a capture group reference is found and it does not refer to a valid capture |
| 38 |
group, then it will be replaced with the empty string. |
| 39 |
|
| 40 |
To write a literal `$`, use `$$`. |
| 41 |
|
| 42 |
To be clear, and as exhibited via the type signatures in the routines in this |
| 43 |
module, it is impossible for a replacement string to be invalid. A replacement |
| 44 |
string may not have the intended semantics, but the interpolation procedure |
| 45 |
itself can never fail. |
| 46 |
*/ |
| 47 |
|
| 48 |
use alloc::{string::String, vec::Vec}; |
| 49 |
|
| 50 |
use crate::util::memchr::memchr; |
| 51 |
|
| 52 |
/// Accepts a replacement string and interpolates capture references with their |
| 53 |
/// corresponding values. |
| 54 |
/// |
| 55 |
/// `append` should be a function that appends the string value of a capture |
| 56 |
/// group at a particular index to the string given. If the capture group |
| 57 |
/// index is invalid, then nothing should be appended. |
| 58 |
/// |
| 59 |
/// `name_to_index` should be a function that maps a capture group name to a |
| 60 |
/// capture group index. If the given name doesn't exist, then `None` should |
| 61 |
/// be returned. |
| 62 |
/// |
| 63 |
/// Finally, `dst` is where the final interpolated contents should be written. |
| 64 |
/// If `replacement` contains no capture group references, then `dst` will be |
| 65 |
/// equivalent to `replacement`. |
| 66 |
/// |
| 67 |
/// See the [module documentation](self) for details about the format |
| 68 |
/// supported. |
| 69 |
/// |
| 70 |
/// # Example |
| 71 |
/// |
| 72 |
/// ``` |
| 73 |
/// use regex_automata::util::interpolate; |
| 74 |
/// |
| 75 |
/// let mut dst = String::new(); |
| 76 |
/// interpolate::string( |
| 77 |
/// "foo $bar baz", |
| 78 |
/// |index, dst| { |
| 79 |
/// if index == 0 { |
| 80 |
/// dst.push_str("BAR"); |
| 81 |
/// } |
| 82 |
/// }, |
| 83 |
/// |name| { |
| 84 |
/// if name == "bar" { |
| 85 |
/// Some(0) |
| 86 |
/// } else { |
| 87 |
/// None |
| 88 |
/// } |
| 89 |
/// }, |
| 90 |
/// &mut dst, |
| 91 |
/// ); |
| 92 |
/// assert_eq!("foo BAR baz", dst); |
| 93 |
/// ``` |
| 94 |
pub fn string( |
| 95 |
mut replacement: &str, |
| 96 |
mut append: impl FnMut(usize, &mut String), |
| 97 |
mut name_to_index: impl FnMut(&str) -> Option<usize>, |
| 98 |
dst: &mut String, |
| 99 |
) { |
| 100 |
while !replacement.is_empty() { |
| 101 |
match memchr(b'$', replacement.as_bytes()) { |
| 102 |
None => break, |
| 103 |
Some(i) => { |
| 104 |
dst.push_str(&replacement[..i]); |
| 105 |
replacement = &replacement[i..]; |
| 106 |
} |
| 107 |
} |
| 108 |
// Handle escaping of '$'. |
| 109 |
if replacement.as_bytes().get(1).map_or(false, |&b| b == b'$') { |
| 110 |
dst.push_str("$"); |
| 111 |
replacement = &replacement[2..]; |
| 112 |
continue; |
| 113 |
} |
| 114 |
debug_assert!(!replacement.is_empty()); |
| 115 |
let cap_ref = match find_cap_ref(replacement.as_bytes()) { |
| 116 |
Some(cap_ref) => cap_ref, |
| 117 |
None => { |
| 118 |
dst.push_str("$"); |
| 119 |
replacement = &replacement[1..]; |
| 120 |
continue; |
| 121 |
} |
| 122 |
}; |
| 123 |
replacement = &replacement[cap_ref.end..]; |
| 124 |
match cap_ref.cap { |
| 125 |
Ref::Number(i) => append(i, dst), |
| 126 |
Ref::Named(name) => { |
| 127 |
if let Some(i) = name_to_index(name) { |
| 128 |
append(i, dst); |
| 129 |
} |
| 130 |
} |
| 131 |
} |
| 132 |
} |
| 133 |
dst.push_str(replacement); |
| 134 |
} |
| 135 |
|
| 136 |
/// Accepts a replacement byte string and interpolates capture references with |
| 137 |
/// their corresponding values. |
| 138 |
/// |
| 139 |
/// `append` should be a function that appends the byte string value of a |
| 140 |
/// capture group at a particular index to the byte string given. If the |
| 141 |
/// capture group index is invalid, then nothing should be appended. |
| 142 |
/// |
| 143 |
/// `name_to_index` should be a function that maps a capture group name to a |
| 144 |
/// capture group index. If the given name doesn't exist, then `None` should |
| 145 |
/// be returned. |
| 146 |
/// |
| 147 |
/// Finally, `dst` is where the final interpolated contents should be written. |
| 148 |
/// If `replacement` contains no capture group references, then `dst` will be |
| 149 |
/// equivalent to `replacement`. |
| 150 |
/// |
| 151 |
/// See the [module documentation](self) for details about the format |
| 152 |
/// supported. |
| 153 |
/// |
| 154 |
/// # Example |
| 155 |
/// |
| 156 |
/// ``` |
| 157 |
/// use regex_automata::util::interpolate; |
| 158 |
/// |
| 159 |
/// let mut dst = vec![]; |
| 160 |
/// interpolate::bytes( |
| 161 |
/// b"foo $bar baz", |
| 162 |
/// |index, dst| { |
| 163 |
/// if index == 0 { |
| 164 |
/// dst.extend_from_slice(b"BAR"); |
| 165 |
/// } |
| 166 |
/// }, |
| 167 |
/// |name| { |
| 168 |
/// if name == "bar" { |
| 169 |
/// Some(0) |
| 170 |
/// } else { |
| 171 |
/// None |
| 172 |
/// } |
| 173 |
/// }, |
| 174 |
/// &mut dst, |
| 175 |
/// ); |
| 176 |
/// assert_eq!(&b"foo BAR baz"[..], dst); |
| 177 |
/// ``` |
| 178 |
pub fn bytes( |
| 179 |
mut replacement: &[u8], |
| 180 |
mut append: impl FnMut(usize, &mut Vec<u8>), |
| 181 |
mut name_to_index: impl FnMut(&str) -> Option<usize>, |
| 182 |
dst: &mut Vec<u8>, |
| 183 |
) { |
| 184 |
while !replacement.is_empty() { |
| 185 |
match memchr(b'$', replacement) { |
| 186 |
None => break, |
| 187 |
Some(i) => { |
| 188 |
dst.extend_from_slice(&replacement[..i]); |
| 189 |
replacement = &replacement[i..]; |
| 190 |
} |
| 191 |
} |
| 192 |
// Handle escaping of '$'. |
| 193 |
if replacement.get(1).map_or(false, |&b| b == b'$') { |
| 194 |
dst.push(b'$'); |
| 195 |
replacement = &replacement[2..]; |
| 196 |
continue; |
| 197 |
} |
| 198 |
debug_assert!(!replacement.is_empty()); |
| 199 |
let cap_ref = match find_cap_ref(replacement) { |
| 200 |
Some(cap_ref) => cap_ref, |
| 201 |
None => { |
| 202 |
dst.push(b'$'); |
| 203 |
replacement = &replacement[1..]; |
| 204 |
continue; |
| 205 |
} |
| 206 |
}; |
| 207 |
replacement = &replacement[cap_ref.end..]; |
| 208 |
match cap_ref.cap { |
| 209 |
Ref::Number(i) => append(i, dst), |
| 210 |
Ref::Named(name) => { |
| 211 |
if let Some(i) = name_to_index(name) { |
| 212 |
append(i, dst); |
| 213 |
} |
| 214 |
} |
| 215 |
} |
| 216 |
} |
| 217 |
dst.extend_from_slice(replacement); |
| 218 |
} |
| 219 |
|
| 220 |
/// `CaptureRef` represents a reference to a capture group inside some text. |
| 221 |
/// The reference is either a capture group name or a number. |
| 222 |
/// |
| 223 |
/// It is also tagged with the position in the text following the |
| 224 |
/// capture reference. |
| 225 |
#[derive(Clone, Copy, Debug, Eq, PartialEq)] |
| 226 |
struct CaptureRef<'a> { |
| 227 |
cap: Ref<'a>, |
| 228 |
end: usize, |
| 229 |
} |
| 230 |
|
| 231 |
/// A reference to a capture group in some text. |
| 232 |
/// |
| 233 |
/// e.g., `$2`, `$foo`, `${foo}`. |
| 234 |
#[derive(Clone, Copy, Debug, Eq, PartialEq)] |
| 235 |
enum Ref<'a> { |
| 236 |
Named(&'a str), |
| 237 |
Number(usize), |
| 238 |
} |
| 239 |
|
| 240 |
impl<'a> From<&'a str> for Ref<'a> { |
| 241 |
fn from(x: &'a str) -> Ref<'a> { |
| 242 |
Ref::Named(x) |
| 243 |
} |
| 244 |
} |
| 245 |
|
| 246 |
impl From<usize> for Ref<'static> { |
| 247 |
fn from(x: usize) -> Ref<'static> { |
| 248 |
Ref::Number(x) |
| 249 |
} |
| 250 |
} |
| 251 |
|
| 252 |
/// Parses a possible reference to a capture group name in the given text, |
| 253 |
/// starting at the beginning of `replacement`. |
| 254 |
/// |
| 255 |
/// If no such valid reference could be found, None is returned. |
| 256 |
/// |
| 257 |
/// Note that this returns a "possible" reference because this routine doesn't |
| 258 |
/// know whether the reference is to a valid group or not. If it winds up not |
| 259 |
/// being a valid reference, then it should be replaced with the empty string. |
| 260 |
fn find_cap_ref(replacement: &[u8]) -> Option<CaptureRef<'_>> { |
| 261 |
let mut i = 0; |
| 262 |
let rep: &[u8] = replacement; |
| 263 |
if rep.len() <= 1 || rep[0] != b'$' { |
| 264 |
return None; |
| 265 |
} |
| 266 |
i += 1; |
| 267 |
if rep[i] == b'{' { |
| 268 |
return find_cap_ref_braced(rep, i + 1); |
| 269 |
} |
| 270 |
let mut cap_end = i; |
| 271 |
while rep.get(cap_end).copied().map_or(false, is_valid_cap_letter) { |
| 272 |
cap_end += 1; |
| 273 |
} |
| 274 |
if cap_end == i { |
| 275 |
return None; |
| 276 |
} |
| 277 |
// We just verified that the range 0..cap_end is valid ASCII, so it must |
| 278 |
// therefore be valid UTF-8. If we really cared, we could avoid this UTF-8 |
| 279 |
// check via an unchecked conversion or by parsing the number straight from |
| 280 |
// &[u8]. |
| 281 |
let cap = core::str::from_utf8(&rep[i..cap_end]) |
| 282 |
.expect("valid UTF-8 capture name"); |
| 283 |
Some(CaptureRef { |
| 284 |
cap: match cap.parse::<usize>() { |
| 285 |
Ok(i) => Ref::Number(i), |
| 286 |
Err(_) => Ref::Named(cap), |
| 287 |
}, |
| 288 |
end: cap_end, |
| 289 |
}) |
| 290 |
} |
| 291 |
|
| 292 |
/// Looks for a braced reference, e.g., `${foo1}`. This assumes that an opening |
| 293 |
/// brace has been found at `i-1` in `rep`. This then looks for a closing |
| 294 |
/// brace and returns the capture reference within the brace. |
| 295 |
fn find_cap_ref_braced(rep: &[u8], mut i: usize) -> Option<CaptureRef<'_>> { |
| 296 |
assert_eq!(b'{', rep[i.checked_sub(1).unwrap()]); |
| 297 |
let start = i; |
| 298 |
while rep.get(i).map_or(false, |&b| b != b'}') { |
| 299 |
i += 1; |
| 300 |
} |
| 301 |
if !rep.get(i).map_or(false, |&b| b == b'}') { |
| 302 |
return None; |
| 303 |
} |
| 304 |
// When looking at braced names, we don't put any restrictions on the name, |
| 305 |
// so it's possible it could be invalid UTF-8. But a capture group name |
| 306 |
// can never be invalid UTF-8, so if we have invalid UTF-8, then we can |
| 307 |
// safely return None. |
| 308 |
let cap = match core::str::from_utf8(&rep[start..i]) { |
| 309 |
Err(_) => return None, |
| 310 |
Ok(cap) => cap, |
| 311 |
}; |
| 312 |
Some(CaptureRef { |
| 313 |
cap: match cap.parse::<usize>() { |
| 314 |
Ok(i) => Ref::Number(i), |
| 315 |
Err(_) => Ref::Named(cap), |
| 316 |
}, |
| 317 |
end: i + 1, |
| 318 |
}) |
| 319 |
} |
| 320 |
|
| 321 |
/// Returns true if and only if the given byte is allowed in a capture name |
| 322 |
/// written in non-brace form. |
| 323 |
fn is_valid_cap_letter(b: u8) -> bool { |
| 324 |
match b { |
| 325 |
b'0'..=b'9' | b'a'..=b'z' | b'A'..=b'Z' | b'_' => true, |
| 326 |
_ => false, |
| 327 |
} |
| 328 |
} |
| 329 |
|
| 330 |
#[cfg(test)] |
| 331 |
mod tests { |
| 332 |
use alloc::{string::String, vec, vec::Vec}; |
| 333 |
|
| 334 |
use super::{find_cap_ref, CaptureRef}; |
| 335 |
|
| 336 |
macro_rules! find { |
| 337 |
($name:ident, $text:expr) => { |
| 338 |
#[test] |
| 339 |
fn $name() { |
| 340 |
assert_eq!(None, find_cap_ref($text.as_bytes())); |
| 341 |
} |
| 342 |
}; |
| 343 |
($name:ident, $text:expr, $capref:expr) => { |
| 344 |
#[test] |
| 345 |
fn $name() { |
| 346 |
assert_eq!(Some($capref), find_cap_ref($text.as_bytes())); |
| 347 |
} |
| 348 |
}; |
| 349 |
} |
| 350 |
|
| 351 |
macro_rules! c { |
| 352 |
($name_or_number:expr, $pos:expr) => { |
| 353 |
CaptureRef { cap: $name_or_number.into(), end: $pos } |
| 354 |
}; |
| 355 |
} |
| 356 |
|
| 357 |
find!(find_cap_ref1, "$foo", c!("foo", 4)); |
| 358 |
find!(find_cap_ref2, "${foo}", c!("foo", 6)); |
| 359 |
find!(find_cap_ref3, "$0", c!(0, 2)); |
| 360 |
find!(find_cap_ref4, "$5", c!(5, 2)); |
| 361 |
find!(find_cap_ref5, "$10", c!(10, 3)); |
| 362 |
// See https://github.com/rust-lang/regex/pull/585 |
| 363 |
// for more on characters following numbers |
| 364 |
find!(find_cap_ref6, "$42a", c!("42a", 4)); |
| 365 |
find!(find_cap_ref7, "${42}a", c!(42, 5)); |
| 366 |
find!(find_cap_ref8, "${42"); |
| 367 |
find!(find_cap_ref9, "${42 "); |
| 368 |
find!(find_cap_ref10, " $0 "); |
| 369 |
find!(find_cap_ref11, "$"); |
| 370 |
find!(find_cap_ref12, " "); |
| 371 |
find!(find_cap_ref13, ""); |
| 372 |
find!(find_cap_ref14, "$1-$2", c!(1, 2)); |
| 373 |
find!(find_cap_ref15, "$1_$2", c!("1_", 3)); |
| 374 |
find!(find_cap_ref16, "$x-$y", c!("x", 2)); |
| 375 |
find!(find_cap_ref17, "$x_$y", c!("x_", 3)); |
| 376 |
find!(find_cap_ref18, "${#}", c!("#", 4)); |
| 377 |
find!(find_cap_ref19, "${Z[}", c!("Z[", 5)); |
| 378 |
find!(find_cap_ref20, "${¾}", c!("¾", 5)); |
| 379 |
find!(find_cap_ref21, "${¾a}", c!("¾a", 6)); |
| 380 |
find!(find_cap_ref22, "${a¾}", c!("a¾", 6)); |
| 381 |
find!(find_cap_ref23, "${☃}", c!("☃", 6)); |
| 382 |
find!(find_cap_ref24, "${a☃}", c!("a☃", 7)); |
| 383 |
find!(find_cap_ref25, "${☃a}", c!("☃a", 7)); |
| 384 |
find!(find_cap_ref26, "${名字}", c!("名字", 9)); |
| 385 |
|
| 386 |
fn interpolate_string( |
| 387 |
mut name_to_index: Vec<(&'static str, usize)>, |
| 388 |
caps: Vec<&'static str>, |
| 389 |
replacement: &str, |
| 390 |
) -> String { |
| 391 |
name_to_index.sort_by_key(|x| x.0); |
| 392 |
|
| 393 |
let mut dst = String::new(); |
| 394 |
super::string( |
| 395 |
replacement, |
| 396 |
|i, dst| { |
| 397 |
if let Some(&s) = caps.get(i) { |
| 398 |
dst.push_str(s); |
| 399 |
} |
| 400 |
}, |
| 401 |
|name| -> Option<usize> { |
| 402 |
name_to_index |
| 403 |
.binary_search_by_key(&name, |x| x.0) |
| 404 |
.ok() |
| 405 |
.map(|i| name_to_index[i].1) |
| 406 |
}, |
| 407 |
&mut dst, |
| 408 |
); |
| 409 |
dst |
| 410 |
} |
| 411 |
|
| 412 |
fn interpolate_bytes( |
| 413 |
mut name_to_index: Vec<(&'static str, usize)>, |
| 414 |
caps: Vec<&'static str>, |
| 415 |
replacement: &str, |
| 416 |
) -> String { |
| 417 |
name_to_index.sort_by_key(|x| x.0); |
| 418 |
|
| 419 |
let mut dst = vec![]; |
| 420 |
super::bytes( |
| 421 |
replacement.as_bytes(), |
| 422 |
|i, dst| { |
| 423 |
if let Some(&s) = caps.get(i) { |
| 424 |
dst.extend_from_slice(s.as_bytes()); |
| 425 |
} |
| 426 |
}, |
| 427 |
|name| -> Option<usize> { |
| 428 |
name_to_index |
| 429 |
.binary_search_by_key(&name, |x| x.0) |
| 430 |
.ok() |
| 431 |
.map(|i| name_to_index[i].1) |
| 432 |
}, |
| 433 |
&mut dst, |
| 434 |
); |
| 435 |
String::from_utf8(dst).unwrap() |
| 436 |
} |
| 437 |
|
| 438 |
macro_rules! interp { |
| 439 |
($name:ident, $map:expr, $caps:expr, $hay:expr, $expected:expr $(,)*) => { |
| 440 |
#[test] |
| 441 |
fn $name() { |
| 442 |
assert_eq!( |
| 443 |
$expected, |
| 444 |
interpolate_string($map, $caps, $hay), |
| 445 |
"interpolate::string failed", |
| 446 |
); |
| 447 |
assert_eq!( |
| 448 |
$expected, |
| 449 |
interpolate_bytes($map, $caps, $hay), |
| 450 |
"interpolate::bytes failed", |
| 451 |
); |
| 452 |
} |
| 453 |
}; |
| 454 |
} |
| 455 |
|
| 456 |
interp!( |
| 457 |
interp1, |
| 458 |
vec![("foo", 2)], |
| 459 |
vec!["", "", "xxx"], |
| 460 |
"test $foo test", |
| 461 |
"test xxx test", |
| 462 |
); |
| 463 |
|
| 464 |
interp!( |
| 465 |
interp2, |
| 466 |
vec![("foo", 2)], |
| 467 |
vec!["", "", "xxx"], |
| 468 |
"test$footest", |
| 469 |
"test", |
| 470 |
); |
| 471 |
|
| 472 |
interp!( |
| 473 |
interp3, |
| 474 |
vec![("foo", 2)], |
| 475 |
vec!["", "", "xxx"], |
| 476 |
"test${foo}test", |
| 477 |
"testxxxtest", |
| 478 |
); |
| 479 |
|
| 480 |
interp!( |
| 481 |
interp4, |
| 482 |
vec![("foo", 2)], |
| 483 |
vec!["", "", "xxx"], |
| 484 |
"test$2test", |
| 485 |
"test", |
| 486 |
); |
| 487 |
|
| 488 |
interp!( |
| 489 |
interp5, |
| 490 |
vec![("foo", 2)], |
| 491 |
vec!["", "", "xxx"], |
| 492 |
"test${2}test", |
| 493 |
"testxxxtest", |
| 494 |
); |
| 495 |
|
| 496 |
interp!( |
| 497 |
interp6, |
| 498 |
vec![("foo", 2)], |
| 499 |
vec!["", "", "xxx"], |
| 500 |
"test $$foo test", |
| 501 |
"test $foo test", |
| 502 |
); |
| 503 |
|
| 504 |
interp!( |
| 505 |
interp7, |
| 506 |
vec![("foo", 2)], |
| 507 |
vec!["", "", "xxx"], |
| 508 |
"test $foo", |
| 509 |
"test xxx", |
| 510 |
); |
| 511 |
|
| 512 |
interp!( |
| 513 |
interp8, |
| 514 |
vec![("foo", 2)], |
| 515 |
vec!["", "", "xxx"], |
| 516 |
"$foo test", |
| 517 |
"xxx test", |
| 518 |
); |
| 519 |
|
| 520 |
interp!( |
| 521 |
interp9, |
| 522 |
vec![("bar", 1), ("foo", 2)], |
| 523 |
vec!["", "yyy", "xxx"], |
| 524 |
"test $bar$foo", |
| 525 |
"test yyyxxx", |
| 526 |
); |
| 527 |
|
| 528 |
interp!( |
| 529 |
interp10, |
| 530 |
vec![("bar", 1), ("foo", 2)], |
| 531 |
vec!["", "yyy", "xxx"], |
| 532 |
"test $ test", |
| 533 |
"test $ test", |
| 534 |
); |
| 535 |
|
| 536 |
interp!( |
| 537 |
interp11, |
| 538 |
vec![("bar", 1), ("foo", 2)], |
| 539 |
vec!["", "yyy", "xxx"], |
| 540 |
"test ${} test", |
| 541 |
"test test", |
| 542 |
); |
| 543 |
|
| 544 |
interp!( |
| 545 |
interp12, |
| 546 |
vec![("bar", 1), ("foo", 2)], |
| 547 |
vec!["", "yyy", "xxx"], |
| 548 |
"test ${ } test", |
| 549 |
"test test", |
| 550 |
); |
| 551 |
|
| 552 |
interp!( |
| 553 |
interp13, |
| 554 |
vec![("bar", 1), ("foo", 2)], |
| 555 |
vec!["", "yyy", "xxx"], |
| 556 |
"test ${a b} test", |
| 557 |
"test test", |
| 558 |
); |
| 559 |
|
| 560 |
interp!( |
| 561 |
interp14, |
| 562 |
vec![("bar", 1), ("foo", 2)], |
| 563 |
vec!["", "yyy", "xxx"], |
| 564 |
"test ${a} test", |
| 565 |
"test test", |
| 566 |
); |
| 567 |
|
| 568 |
// This is a funny case where a braced reference is never closed, but |
| 569 |
// within the unclosed braced reference, there is an unbraced reference. |
| 570 |
// In this case, the braced reference is just treated literally and the |
| 571 |
// unbraced reference is found. |
| 572 |
interp!( |
| 573 |
interp15, |
| 574 |
vec![("bar", 1), ("foo", 2)], |
| 575 |
vec!["", "yyy", "xxx"], |
| 576 |
"test ${wat $bar ok", |
| 577 |
"test ${wat yyy ok", |
| 578 |
); |
| 579 |
} |