| 1 |
;***************************************************************************** |
| 2 |
;* x86inc.asm: x86 abstraction layer |
| 3 |
;***************************************************************************** |
| 4 |
;* Copyright (C) 2005-2022 x264 project |
| 5 |
;* |
| 6 |
;* Authors: Loren Merritt <[email protected]> |
| 7 |
;* Henrik Gramner <[email protected]> |
| 8 |
;* Anton Mitrofanov <[email protected]> |
| 9 |
;* Fiona Glaser <[email protected]> |
| 10 |
;* |
| 11 |
;* Permission to use, copy, modify, and/or distribute this software for any |
| 12 |
;* purpose with or without fee is hereby granted, provided that the above |
| 13 |
;* copyright notice and this permission notice appear in all copies. |
| 14 |
;* |
| 15 |
;* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 16 |
;* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 17 |
;* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 18 |
;* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 19 |
;* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 20 |
;* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 21 |
;* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 22 |
;***************************************************************************** |
| 23 |
|
| 24 |
; This is a header file for the x86inc.asm assembly language, which uses |
| 25 |
; NASM/YASM syntax combined with a large number of macros to provide easy |
| 26 |
; abstraction between different calling conventions (x86_32, win64, linux64). |
| 27 |
; It also has various other useful features to simplify writing the kind of |
| 28 |
; DSP functions that are most often used. |
| 29 |
|
| 30 |
%ifndef private_prefix |
| 31 |
%error private_prefix not defined |
| 32 |
%endif |
| 33 |
|
| 34 |
%ifndef public_prefix |
| 35 |
%define public_prefix private_prefix |
| 36 |
%endif |
| 37 |
|
| 38 |
%ifndef STACK_ALIGNMENT |
| 39 |
%if ARCH_X86_64 |
| 40 |
%define STACK_ALIGNMENT 16 |
| 41 |
%else |
| 42 |
%define STACK_ALIGNMENT 4 |
| 43 |
%endif |
| 44 |
%endif |
| 45 |
|
| 46 |
%define WIN64 0 |
| 47 |
%define UNIX64 0 |
| 48 |
%if ARCH_X86_64 |
| 49 |
%ifidn __OUTPUT_FORMAT__,win32 |
| 50 |
%define WIN64 1 |
| 51 |
%elifidn __OUTPUT_FORMAT__,win64 |
| 52 |
%define WIN64 1 |
| 53 |
%elifidn __OUTPUT_FORMAT__,x64 |
| 54 |
%define WIN64 1 |
| 55 |
%else |
| 56 |
%define UNIX64 1 |
| 57 |
%endif |
| 58 |
%endif |
| 59 |
|
| 60 |
%define FORMAT_ELF 0 |
| 61 |
%define FORMAT_MACHO 0 |
| 62 |
%ifidn __OUTPUT_FORMAT__,elf |
| 63 |
%define FORMAT_ELF 1 |
| 64 |
%elifidn __OUTPUT_FORMAT__,elf32 |
| 65 |
%define FORMAT_ELF 1 |
| 66 |
%elifidn __OUTPUT_FORMAT__,elf64 |
| 67 |
%define FORMAT_ELF 1 |
| 68 |
%elifidn __OUTPUT_FORMAT__,macho |
| 69 |
%define FORMAT_MACHO 1 |
| 70 |
%elifidn __OUTPUT_FORMAT__,macho32 |
| 71 |
%define FORMAT_MACHO 1 |
| 72 |
%elifidn __OUTPUT_FORMAT__,macho64 |
| 73 |
%define FORMAT_MACHO 1 |
| 74 |
%endif |
| 75 |
|
| 76 |
%ifdef PREFIX |
| 77 |
%define mangle(x) _ %+ x |
| 78 |
%else |
| 79 |
%define mangle(x) x |
| 80 |
%endif |
| 81 |
|
| 82 |
; Use VEX-encoding even in non-AVX functions |
| 83 |
%ifndef FORCE_VEX_ENCODING |
| 84 |
%define FORCE_VEX_ENCODING 0 |
| 85 |
%endif |
| 86 |
|
| 87 |
%macro SECTION_RODATA 0-1 16 |
| 88 |
%ifidn __OUTPUT_FORMAT__,win32 |
| 89 |
SECTION .rdata align=%1 |
| 90 |
%elif WIN64 |
| 91 |
SECTION .rdata align=%1 |
| 92 |
%else |
| 93 |
SECTION .rodata align=%1 |
| 94 |
%endif |
| 95 |
%endmacro |
| 96 |
|
| 97 |
%if ARCH_X86_64 |
| 98 |
%define PIC 1 ; always use PIC on x86-64 |
| 99 |
default rel |
| 100 |
%elifidn __OUTPUT_FORMAT__,win32 |
| 101 |
%define PIC 0 ; PIC isn't used on 32-bit Windows |
| 102 |
%elifndef PIC |
| 103 |
%define PIC 0 |
| 104 |
%endif |
| 105 |
|
| 106 |
%define HAVE_PRIVATE_EXTERN 1 |
| 107 |
%ifdef __NASM_VER__ |
| 108 |
%use smartalign |
| 109 |
%if __NASM_VERSION_ID__ < 0x020e0000 ; 2.14 |
| 110 |
%define HAVE_PRIVATE_EXTERN 0 |
| 111 |
%endif |
| 112 |
%endif |
| 113 |
|
| 114 |
; Macros to eliminate most code duplication between x86_32 and x86_64: |
| 115 |
; Currently this works only for leaf functions which load all their arguments |
| 116 |
; into registers at the start, and make no other use of the stack. Luckily that |
| 117 |
; covers most use cases. |
| 118 |
|
| 119 |
; PROLOGUE: |
| 120 |
; %1 = number of arguments. loads them from stack if needed. |
| 121 |
; %2 = number of registers used. pushes callee-saved regs if needed. |
| 122 |
; %3 = number of xmm registers used. pushes callee-saved xmm regs if needed. |
| 123 |
; %4 = (optional) stack size to be allocated. The stack will be aligned before |
| 124 |
; allocating the specified stack size. If the required stack alignment is |
| 125 |
; larger than the known stack alignment the stack will be manually aligned |
| 126 |
; and an extra register will be allocated to hold the original stack |
| 127 |
; pointer (to not invalidate r0m etc.). To prevent the use of an extra |
| 128 |
; register as stack pointer, request a negative stack size. |
| 129 |
; %4+/%5+ = list of names to define to registers |
| 130 |
; PROLOGUE can also be invoked by adding the same options to cglobal |
| 131 |
|
| 132 |
; e.g. |
| 133 |
; cglobal foo, 2,3,7,0x40, dst, src, tmp |
| 134 |
; declares a function (foo) that automatically loads two arguments (dst and |
| 135 |
; src) into registers, uses one additional register (tmp) plus 7 vector |
| 136 |
; registers (m0-m6) and allocates 0x40 bytes of stack space. |
| 137 |
|
| 138 |
; TODO Some functions can use some args directly from the stack. If they're the |
| 139 |
; last args then you can just not declare them, but if they're in the middle |
| 140 |
; we need more flexible macro. |
| 141 |
|
| 142 |
; RET: |
| 143 |
; Pops anything that was pushed by PROLOGUE, and returns. |
| 144 |
|
| 145 |
; REP_RET: |
| 146 |
; Use this instead of RET if it's a branch target. |
| 147 |
|
| 148 |
; registers: |
| 149 |
; rN and rNq are the native-size register holding function argument N |
| 150 |
; rNd, rNw, rNb are dword, word, and byte size |
| 151 |
; rNh is the high 8 bits of the word size |
| 152 |
; rNm is the original location of arg N (a register or on the stack), dword |
| 153 |
; rNmp is native size |
| 154 |
|
| 155 |
%macro DECLARE_REG 2-3 |
| 156 |
%define r%1q %2 |
| 157 |
%define r%1d %2d |
| 158 |
%define r%1w %2w |
| 159 |
%define r%1b %2b |
| 160 |
%define r%1h %2h |
| 161 |
%define %2q %2 |
| 162 |
%if %0 == 2 |
| 163 |
%define r%1m %2d |
| 164 |
%define r%1mp %2 |
| 165 |
%elif ARCH_X86_64 ; memory |
| 166 |
%define r%1m [rstk + stack_offset + %3] |
| 167 |
%define r%1mp qword r %+ %1 %+ m |
| 168 |
%else |
| 169 |
%define r%1m [rstk + stack_offset + %3] |
| 170 |
%define r%1mp dword r %+ %1 %+ m |
| 171 |
%endif |
| 172 |
%define r%1 %2 |
| 173 |
%endmacro |
| 174 |
|
| 175 |
%macro DECLARE_REG_SIZE 3 |
| 176 |
%define r%1q r%1 |
| 177 |
%define e%1q r%1 |
| 178 |
%define r%1d e%1 |
| 179 |
%define e%1d e%1 |
| 180 |
%define r%1w %1 |
| 181 |
%define e%1w %1 |
| 182 |
%define r%1h %3 |
| 183 |
%define e%1h %3 |
| 184 |
%define r%1b %2 |
| 185 |
%define e%1b %2 |
| 186 |
%if ARCH_X86_64 == 0 |
| 187 |
%define r%1 e%1 |
| 188 |
%endif |
| 189 |
%endmacro |
| 190 |
|
| 191 |
DECLARE_REG_SIZE ax, al, ah |
| 192 |
DECLARE_REG_SIZE bx, bl, bh |
| 193 |
DECLARE_REG_SIZE cx, cl, ch |
| 194 |
DECLARE_REG_SIZE dx, dl, dh |
| 195 |
DECLARE_REG_SIZE si, sil, null |
| 196 |
DECLARE_REG_SIZE di, dil, null |
| 197 |
DECLARE_REG_SIZE bp, bpl, null |
| 198 |
|
| 199 |
; t# defines for when per-arch register allocation is more complex than just function arguments |
| 200 |
|
| 201 |
%macro DECLARE_REG_TMP 1-* |
| 202 |
%assign %%i 0 |
| 203 |
%rep %0 |
| 204 |
CAT_XDEFINE t, %%i, r%1 |
| 205 |
%assign %%i %%i+1 |
| 206 |
%rotate 1 |
| 207 |
%endrep |
| 208 |
%endmacro |
| 209 |
|
| 210 |
%macro DECLARE_REG_TMP_SIZE 0-* |
| 211 |
%rep %0 |
| 212 |
%define t%1q t%1 %+ q |
| 213 |
%define t%1d t%1 %+ d |
| 214 |
%define t%1w t%1 %+ w |
| 215 |
%define t%1h t%1 %+ h |
| 216 |
%define t%1b t%1 %+ b |
| 217 |
%rotate 1 |
| 218 |
%endrep |
| 219 |
%endmacro |
| 220 |
|
| 221 |
DECLARE_REG_TMP_SIZE 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14 |
| 222 |
|
| 223 |
%if ARCH_X86_64 |
| 224 |
%define gprsize 8 |
| 225 |
%else |
| 226 |
%define gprsize 4 |
| 227 |
%endif |
| 228 |
|
| 229 |
%macro LEA 2 |
| 230 |
%if ARCH_X86_64 |
| 231 |
lea %1, [%2] |
| 232 |
%elif PIC |
| 233 |
call $+5 ; special-cased to not affect the RSB on most CPU:s |
| 234 |
pop %1 |
| 235 |
add %1, (%2)-$+1 |
| 236 |
%else |
| 237 |
mov %1, %2 |
| 238 |
%endif |
| 239 |
%endmacro |
| 240 |
|
| 241 |
; Repeats an instruction/operation for multiple arguments. |
| 242 |
; Example usage: "REPX {psrlw x, 8}, m0, m1, m2, m3" |
| 243 |
%macro REPX 2-* ; operation, args |
| 244 |
%xdefine %%f(x) %1 |
| 245 |
%rep %0 - 1 |
| 246 |
%rotate 1 |
| 247 |
%%f(%1) |
| 248 |
%endrep |
| 249 |
%endmacro |
| 250 |
|
| 251 |
%macro PUSH 1 |
| 252 |
push %1 |
| 253 |
%ifidn rstk, rsp |
| 254 |
%assign stack_offset stack_offset+gprsize |
| 255 |
%endif |
| 256 |
%endmacro |
| 257 |
|
| 258 |
%macro POP 1 |
| 259 |
pop %1 |
| 260 |
%ifidn rstk, rsp |
| 261 |
%assign stack_offset stack_offset-gprsize |
| 262 |
%endif |
| 263 |
%endmacro |
| 264 |
|
| 265 |
%macro PUSH_IF_USED 1-* |
| 266 |
%rep %0 |
| 267 |
%if %1 < regs_used |
| 268 |
PUSH r%1 |
| 269 |
%endif |
| 270 |
%rotate 1 |
| 271 |
%endrep |
| 272 |
%endmacro |
| 273 |
|
| 274 |
%macro POP_IF_USED 1-* |
| 275 |
%rep %0 |
| 276 |
%if %1 < regs_used |
| 277 |
pop r%1 |
| 278 |
%endif |
| 279 |
%rotate 1 |
| 280 |
%endrep |
| 281 |
%endmacro |
| 282 |
|
| 283 |
%macro LOAD_IF_USED 1-* |
| 284 |
%rep %0 |
| 285 |
%if %1 < num_args |
| 286 |
mov r%1, r %+ %1 %+ mp |
| 287 |
%endif |
| 288 |
%rotate 1 |
| 289 |
%endrep |
| 290 |
%endmacro |
| 291 |
|
| 292 |
%macro SUB 2 |
| 293 |
sub %1, %2 |
| 294 |
%ifidn %1, rstk |
| 295 |
%assign stack_offset stack_offset+(%2) |
| 296 |
%endif |
| 297 |
%endmacro |
| 298 |
|
| 299 |
%macro ADD 2 |
| 300 |
add %1, %2 |
| 301 |
%ifidn %1, rstk |
| 302 |
%assign stack_offset stack_offset-(%2) |
| 303 |
%endif |
| 304 |
%endmacro |
| 305 |
|
| 306 |
%macro movifnidn 2 |
| 307 |
%ifnidn %1, %2 |
| 308 |
mov %1, %2 |
| 309 |
%endif |
| 310 |
%endmacro |
| 311 |
|
| 312 |
%if ARCH_X86_64 == 0 |
| 313 |
%define movsxd movifnidn |
| 314 |
%endif |
| 315 |
|
| 316 |
%macro movsxdifnidn 2 |
| 317 |
%ifnidn %1, %2 |
| 318 |
movsxd %1, %2 |
| 319 |
%endif |
| 320 |
%endmacro |
| 321 |
|
| 322 |
%macro ASSERT 1 |
| 323 |
%if (%1) == 0 |
| 324 |
%error assertion ``%1'' failed |
| 325 |
%endif |
| 326 |
%endmacro |
| 327 |
|
| 328 |
%macro DEFINE_ARGS 0-* |
| 329 |
%ifdef n_arg_names |
| 330 |
%assign %%i 0 |
| 331 |
%rep n_arg_names |
| 332 |
CAT_UNDEF arg_name %+ %%i, q |
| 333 |
CAT_UNDEF arg_name %+ %%i, d |
| 334 |
CAT_UNDEF arg_name %+ %%i, w |
| 335 |
CAT_UNDEF arg_name %+ %%i, h |
| 336 |
CAT_UNDEF arg_name %+ %%i, b |
| 337 |
CAT_UNDEF arg_name %+ %%i, m |
| 338 |
CAT_UNDEF arg_name %+ %%i, mp |
| 339 |
CAT_UNDEF arg_name, %%i |
| 340 |
%assign %%i %%i+1 |
| 341 |
%endrep |
| 342 |
%endif |
| 343 |
|
| 344 |
%xdefine %%stack_offset stack_offset |
| 345 |
%undef stack_offset ; so that the current value of stack_offset doesn't get baked in by xdefine |
| 346 |
%assign %%i 0 |
| 347 |
%rep %0 |
| 348 |
%xdefine %1q r %+ %%i %+ q |
| 349 |
%xdefine %1d r %+ %%i %+ d |
| 350 |
%xdefine %1w r %+ %%i %+ w |
| 351 |
%xdefine %1h r %+ %%i %+ h |
| 352 |
%xdefine %1b r %+ %%i %+ b |
| 353 |
%xdefine %1m r %+ %%i %+ m |
| 354 |
%xdefine %1mp r %+ %%i %+ mp |
| 355 |
CAT_XDEFINE arg_name, %%i, %1 |
| 356 |
%assign %%i %%i+1 |
| 357 |
%rotate 1 |
| 358 |
%endrep |
| 359 |
%xdefine stack_offset %%stack_offset |
| 360 |
%assign n_arg_names %0 |
| 361 |
%endmacro |
| 362 |
|
| 363 |
%define required_stack_alignment ((mmsize + 15) & ~15) |
| 364 |
%define vzeroupper_required (mmsize > 16 && (ARCH_X86_64 == 0 || xmm_regs_used > 16 || notcpuflag(avx512))) |
| 365 |
%define high_mm_regs (16*cpuflag(avx512)) |
| 366 |
|
| 367 |
; Large stack allocations on Windows need to use stack probing in order |
| 368 |
; to guarantee that all stack memory is committed before accessing it. |
| 369 |
; This is done by ensuring that the guard page(s) at the end of the |
| 370 |
; currently committed pages are touched prior to any pages beyond that. |
| 371 |
%if WIN64 |
| 372 |
%assign STACK_PROBE_SIZE 8192 |
| 373 |
%elifidn __OUTPUT_FORMAT__, win32 |
| 374 |
%assign STACK_PROBE_SIZE 4096 |
| 375 |
%else |
| 376 |
%assign STACK_PROBE_SIZE 0 |
| 377 |
%endif |
| 378 |
|
| 379 |
%macro PROBE_STACK 1 ; stack_size |
| 380 |
%if STACK_PROBE_SIZE |
| 381 |
%assign %%i STACK_PROBE_SIZE |
| 382 |
%rep %1 / STACK_PROBE_SIZE |
| 383 |
mov eax, [rsp-%%i] |
| 384 |
%assign %%i %%i+STACK_PROBE_SIZE |
| 385 |
%endrep |
| 386 |
%endif |
| 387 |
%endmacro |
| 388 |
|
| 389 |
%macro ALLOC_STACK 0-2 0, 0 ; stack_size, n_xmm_regs (for win64 only) |
| 390 |
%ifnum %1 |
| 391 |
%if %1 != 0 |
| 392 |
%assign %%pad 0 |
| 393 |
%assign stack_size %1 |
| 394 |
%if stack_size < 0 |
| 395 |
%assign stack_size -stack_size |
| 396 |
%endif |
| 397 |
%if WIN64 |
| 398 |
%assign %%pad %%pad + 32 ; shadow space |
| 399 |
%if mmsize != 8 |
| 400 |
%assign xmm_regs_used %2 |
| 401 |
%if xmm_regs_used > 8 |
| 402 |
%assign %%pad %%pad + (xmm_regs_used-8)*16 ; callee-saved xmm registers |
| 403 |
%endif |
| 404 |
%endif |
| 405 |
%endif |
| 406 |
%if required_stack_alignment <= STACK_ALIGNMENT |
| 407 |
; maintain the current stack alignment |
| 408 |
%assign stack_size_padded stack_size + %%pad + ((-%%pad-stack_offset-gprsize) & (STACK_ALIGNMENT-1)) |
| 409 |
PROBE_STACK stack_size_padded |
| 410 |
SUB rsp, stack_size_padded |
| 411 |
%else |
| 412 |
%assign %%reg_num (regs_used - 1) |
| 413 |
%xdefine rstk r %+ %%reg_num |
| 414 |
; align stack, and save original stack location directly above |
| 415 |
; it, i.e. in [rsp+stack_size_padded], so we can restore the |
| 416 |
; stack in a single instruction (i.e. mov rsp, rstk or mov |
| 417 |
; rsp, [rsp+stack_size_padded]) |
| 418 |
%if %1 < 0 ; need to store rsp on stack |
| 419 |
%xdefine rstkm [rsp + stack_size + %%pad] |
| 420 |
%assign %%pad %%pad + gprsize |
| 421 |
%else ; can keep rsp in rstk during whole function |
| 422 |
%xdefine rstkm rstk |
| 423 |
%endif |
| 424 |
%assign stack_size_padded stack_size + ((%%pad + required_stack_alignment-1) & ~(required_stack_alignment-1)) |
| 425 |
PROBE_STACK stack_size_padded |
| 426 |
mov rstk, rsp |
| 427 |
and rsp, ~(required_stack_alignment-1) |
| 428 |
sub rsp, stack_size_padded |
| 429 |
movifnidn rstkm, rstk |
| 430 |
%endif |
| 431 |
WIN64_PUSH_XMM |
| 432 |
%endif |
| 433 |
%endif |
| 434 |
%endmacro |
| 435 |
|
| 436 |
%macro SETUP_STACK_POINTER 0-1 0 |
| 437 |
%ifnum %1 |
| 438 |
%if %1 != 0 && required_stack_alignment > STACK_ALIGNMENT |
| 439 |
%if %1 > 0 |
| 440 |
; Reserve an additional register for storing the original stack pointer, but avoid using |
| 441 |
; eax/rax for this purpose since it can potentially get overwritten as a return value. |
| 442 |
%assign regs_used (regs_used + 1) |
| 443 |
%if ARCH_X86_64 && regs_used == 7 |
| 444 |
%assign regs_used 8 |
| 445 |
%elif ARCH_X86_64 == 0 && regs_used == 1 |
| 446 |
%assign regs_used 2 |
| 447 |
%endif |
| 448 |
%endif |
| 449 |
%if ARCH_X86_64 && regs_used < 5 + UNIX64 * 3 |
| 450 |
; Ensure that we don't clobber any registers containing arguments. For UNIX64 we also preserve r6 (rax) |
| 451 |
; since it's used as a hidden argument in vararg functions to specify the number of vector registers used. |
| 452 |
%assign regs_used 5 + UNIX64 * 3 |
| 453 |
%endif |
| 454 |
%endif |
| 455 |
%endif |
| 456 |
%endmacro |
| 457 |
|
| 458 |
%if WIN64 ; Windows x64 ;================================================= |
| 459 |
|
| 460 |
DECLARE_REG 0, rcx |
| 461 |
DECLARE_REG 1, rdx |
| 462 |
DECLARE_REG 2, R8 |
| 463 |
DECLARE_REG 3, R9 |
| 464 |
DECLARE_REG 4, R10, 40 |
| 465 |
DECLARE_REG 5, R11, 48 |
| 466 |
DECLARE_REG 6, rax, 56 |
| 467 |
DECLARE_REG 7, rdi, 64 |
| 468 |
DECLARE_REG 8, rsi, 72 |
| 469 |
DECLARE_REG 9, rbx, 80 |
| 470 |
DECLARE_REG 10, rbp, 88 |
| 471 |
DECLARE_REG 11, R14, 96 |
| 472 |
DECLARE_REG 12, R15, 104 |
| 473 |
DECLARE_REG 13, R12, 112 |
| 474 |
DECLARE_REG 14, R13, 120 |
| 475 |
|
| 476 |
%macro PROLOGUE 2-5+ 0, 0 ; #args, #regs, #xmm_regs, [stack_size,] arg_names... |
| 477 |
%assign num_args %1 |
| 478 |
%assign regs_used %2 |
| 479 |
ASSERT regs_used >= num_args |
| 480 |
SETUP_STACK_POINTER %4 |
| 481 |
ASSERT regs_used <= 15 |
| 482 |
PUSH_IF_USED 7, 8, 9, 10, 11, 12, 13, 14 |
| 483 |
ALLOC_STACK %4, %3 |
| 484 |
%if mmsize != 8 && stack_size == 0 |
| 485 |
WIN64_SPILL_XMM %3 |
| 486 |
%endif |
| 487 |
LOAD_IF_USED 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 |
| 488 |
%if %0 > 4 |
| 489 |
%ifnum %4 |
| 490 |
DEFINE_ARGS %5 |
| 491 |
%else |
| 492 |
DEFINE_ARGS %4, %5 |
| 493 |
%endif |
| 494 |
%elifnnum %4 |
| 495 |
DEFINE_ARGS %4 |
| 496 |
%endif |
| 497 |
%endmacro |
| 498 |
|
| 499 |
%macro WIN64_PUSH_XMM 0 |
| 500 |
; Use the shadow space to store XMM6 and XMM7, the rest needs stack space allocated. |
| 501 |
%if xmm_regs_used > 6 + high_mm_regs |
| 502 |
movaps [rstk + stack_offset + 8], xmm6 |
| 503 |
%endif |
| 504 |
%if xmm_regs_used > 7 + high_mm_regs |
| 505 |
movaps [rstk + stack_offset + 24], xmm7 |
| 506 |
%endif |
| 507 |
%assign %%xmm_regs_on_stack xmm_regs_used - high_mm_regs - 8 |
| 508 |
%if %%xmm_regs_on_stack > 0 |
| 509 |
%assign %%i 8 |
| 510 |
%rep %%xmm_regs_on_stack |
| 511 |
movaps [rsp + (%%i-8)*16 + stack_size + 32], xmm %+ %%i |
| 512 |
%assign %%i %%i+1 |
| 513 |
%endrep |
| 514 |
%endif |
| 515 |
%endmacro |
| 516 |
|
| 517 |
%macro WIN64_SPILL_XMM 1 |
| 518 |
%assign xmm_regs_used %1 |
| 519 |
ASSERT xmm_regs_used <= 16 + high_mm_regs |
| 520 |
%assign %%xmm_regs_on_stack xmm_regs_used - high_mm_regs - 8 |
| 521 |
%if %%xmm_regs_on_stack > 0 |
| 522 |
; Allocate stack space for callee-saved xmm registers plus shadow space and align the stack. |
| 523 |
%assign %%pad %%xmm_regs_on_stack*16 + 32 |
| 524 |
%assign stack_size_padded %%pad + ((-%%pad-stack_offset-gprsize) & (STACK_ALIGNMENT-1)) |
| 525 |
SUB rsp, stack_size_padded |
| 526 |
%endif |
| 527 |
WIN64_PUSH_XMM |
| 528 |
%endmacro |
| 529 |
|
| 530 |
%macro WIN64_RESTORE_XMM_INTERNAL 0 |
| 531 |
%assign %%pad_size 0 |
| 532 |
%assign %%xmm_regs_on_stack xmm_regs_used - high_mm_regs - 8 |
| 533 |
%if %%xmm_regs_on_stack > 0 |
| 534 |
%assign %%i xmm_regs_used - high_mm_regs |
| 535 |
%rep %%xmm_regs_on_stack |
| 536 |
%assign %%i %%i-1 |
| 537 |
movaps xmm %+ %%i, [rsp + (%%i-8)*16 + stack_size + 32] |
| 538 |
%endrep |
| 539 |
%endif |
| 540 |
%if stack_size_padded > 0 |
| 541 |
%if stack_size > 0 && required_stack_alignment > STACK_ALIGNMENT |
| 542 |
mov rsp, rstkm |
| 543 |
%else |
| 544 |
add rsp, stack_size_padded |
| 545 |
%assign %%pad_size stack_size_padded |
| 546 |
%endif |
| 547 |
%endif |
| 548 |
%if xmm_regs_used > 7 + high_mm_regs |
| 549 |
movaps xmm7, [rsp + stack_offset - %%pad_size + 24] |
| 550 |
%endif |
| 551 |
%if xmm_regs_used > 6 + high_mm_regs |
| 552 |
movaps xmm6, [rsp + stack_offset - %%pad_size + 8] |
| 553 |
%endif |
| 554 |
%endmacro |
| 555 |
|
| 556 |
%macro WIN64_RESTORE_XMM 0 |
| 557 |
WIN64_RESTORE_XMM_INTERNAL |
| 558 |
%assign stack_offset (stack_offset-stack_size_padded) |
| 559 |
%assign stack_size_padded 0 |
| 560 |
%assign xmm_regs_used 0 |
| 561 |
%endmacro |
| 562 |
|
| 563 |
%define has_epilogue regs_used > 7 || stack_size > 0 || vzeroupper_required || xmm_regs_used > 6+high_mm_regs |
| 564 |
|
| 565 |
%macro RET 0 |
| 566 |
WIN64_RESTORE_XMM_INTERNAL |
| 567 |
POP_IF_USED 14, 13, 12, 11, 10, 9, 8, 7 |
| 568 |
%if vzeroupper_required |
| 569 |
vzeroupper |
| 570 |
%endif |
| 571 |
AUTO_REP_RET |
| 572 |
%endmacro |
| 573 |
|
| 574 |
%elif ARCH_X86_64 ; *nix x64 ;============================================= |
| 575 |
|
| 576 |
DECLARE_REG 0, rdi |
| 577 |
DECLARE_REG 1, rsi |
| 578 |
DECLARE_REG 2, rdx |
| 579 |
DECLARE_REG 3, rcx |
| 580 |
DECLARE_REG 4, R8 |
| 581 |
DECLARE_REG 5, R9 |
| 582 |
DECLARE_REG 6, rax, 8 |
| 583 |
DECLARE_REG 7, R10, 16 |
| 584 |
DECLARE_REG 8, R11, 24 |
| 585 |
DECLARE_REG 9, rbx, 32 |
| 586 |
DECLARE_REG 10, rbp, 40 |
| 587 |
DECLARE_REG 11, R14, 48 |
| 588 |
DECLARE_REG 12, R15, 56 |
| 589 |
DECLARE_REG 13, R12, 64 |
| 590 |
DECLARE_REG 14, R13, 72 |
| 591 |
|
| 592 |
%macro PROLOGUE 2-5+ 0, 0 ; #args, #regs, #xmm_regs, [stack_size,] arg_names... |
| 593 |
%assign num_args %1 |
| 594 |
%assign regs_used %2 |
| 595 |
%assign xmm_regs_used %3 |
| 596 |
ASSERT regs_used >= num_args |
| 597 |
SETUP_STACK_POINTER %4 |
| 598 |
ASSERT regs_used <= 15 |
| 599 |
PUSH_IF_USED 9, 10, 11, 12, 13, 14 |
| 600 |
ALLOC_STACK %4 |
| 601 |
LOAD_IF_USED 6, 7, 8, 9, 10, 11, 12, 13, 14 |
| 602 |
%if %0 > 4 |
| 603 |
%ifnum %4 |
| 604 |
DEFINE_ARGS %5 |
| 605 |
%else |
| 606 |
DEFINE_ARGS %4, %5 |
| 607 |
%endif |
| 608 |
%elifnnum %4 |
| 609 |
DEFINE_ARGS %4 |
| 610 |
%endif |
| 611 |
%endmacro |
| 612 |
|
| 613 |
%define has_epilogue regs_used > 9 || stack_size > 0 || vzeroupper_required |
| 614 |
|
| 615 |
%macro RET 0 |
| 616 |
%if stack_size_padded > 0 |
| 617 |
%if required_stack_alignment > STACK_ALIGNMENT |
| 618 |
mov rsp, rstkm |
| 619 |
%else |
| 620 |
add rsp, stack_size_padded |
| 621 |
%endif |
| 622 |
%endif |
| 623 |
POP_IF_USED 14, 13, 12, 11, 10, 9 |
| 624 |
%if vzeroupper_required |
| 625 |
vzeroupper |
| 626 |
%endif |
| 627 |
AUTO_REP_RET |
| 628 |
%endmacro |
| 629 |
|
| 630 |
%else ; X86_32 ;============================================================== |
| 631 |
|
| 632 |
DECLARE_REG 0, eax, 4 |
| 633 |
DECLARE_REG 1, ecx, 8 |
| 634 |
DECLARE_REG 2, edx, 12 |
| 635 |
DECLARE_REG 3, ebx, 16 |
| 636 |
DECLARE_REG 4, esi, 20 |
| 637 |
DECLARE_REG 5, edi, 24 |
| 638 |
DECLARE_REG 6, ebp, 28 |
| 639 |
%define rsp esp |
| 640 |
|
| 641 |
%macro DECLARE_ARG 1-* |
| 642 |
%rep %0 |
| 643 |
%define r%1m [rstk + stack_offset + 4*%1 + 4] |
| 644 |
%define r%1mp dword r%1m |
| 645 |
%rotate 1 |
| 646 |
%endrep |
| 647 |
%endmacro |
| 648 |
|
| 649 |
DECLARE_ARG 7, 8, 9, 10, 11, 12, 13, 14 |
| 650 |
|
| 651 |
%macro PROLOGUE 2-5+ 0, 0 ; #args, #regs, #xmm_regs, [stack_size,] arg_names... |
| 652 |
%assign num_args %1 |
| 653 |
%assign regs_used %2 |
| 654 |
ASSERT regs_used >= num_args |
| 655 |
%if num_args > 7 |
| 656 |
%assign num_args 7 |
| 657 |
%endif |
| 658 |
%if regs_used > 7 |
| 659 |
%assign regs_used 7 |
| 660 |
%endif |
| 661 |
SETUP_STACK_POINTER %4 |
| 662 |
ASSERT regs_used <= 7 |
| 663 |
PUSH_IF_USED 3, 4, 5, 6 |
| 664 |
ALLOC_STACK %4 |
| 665 |
LOAD_IF_USED 0, 1, 2, 3, 4, 5, 6 |
| 666 |
%if %0 > 4 |
| 667 |
%ifnum %4 |
| 668 |
DEFINE_ARGS %5 |
| 669 |
%else |
| 670 |
DEFINE_ARGS %4, %5 |
| 671 |
%endif |
| 672 |
%elifnnum %4 |
| 673 |
DEFINE_ARGS %4 |
| 674 |
%endif |
| 675 |
%endmacro |
| 676 |
|
| 677 |
%define has_epilogue regs_used > 3 || stack_size > 0 || vzeroupper_required |
| 678 |
|
| 679 |
%macro RET 0 |
| 680 |
%if stack_size_padded > 0 |
| 681 |
%if required_stack_alignment > STACK_ALIGNMENT |
| 682 |
mov rsp, rstkm |
| 683 |
%else |
| 684 |
add rsp, stack_size_padded |
| 685 |
%endif |
| 686 |
%endif |
| 687 |
POP_IF_USED 6, 5, 4, 3 |
| 688 |
%if vzeroupper_required |
| 689 |
vzeroupper |
| 690 |
%endif |
| 691 |
AUTO_REP_RET |
| 692 |
%endmacro |
| 693 |
|
| 694 |
%endif ;====================================================================== |
| 695 |
|
| 696 |
%if WIN64 == 0 |
| 697 |
%macro WIN64_SPILL_XMM 1 |
| 698 |
%assign xmm_regs_used %1 |
| 699 |
%endmacro |
| 700 |
%macro WIN64_RESTORE_XMM 0 |
| 701 |
%assign xmm_regs_used 0 |
| 702 |
%endmacro |
| 703 |
%macro WIN64_PUSH_XMM 0 |
| 704 |
%endmacro |
| 705 |
%endif |
| 706 |
|
| 707 |
; On AMD cpus <=K10, an ordinary ret is slow if it immediately follows either |
| 708 |
; a branch or a branch target. So switch to a 2-byte form of ret in that case. |
| 709 |
; We can automatically detect "follows a branch", but not a branch target. |
| 710 |
; (SSSE3 is a sufficient condition to know that your cpu doesn't have this problem.) |
| 711 |
%macro REP_RET 0 |
| 712 |
%if has_epilogue || cpuflag(ssse3) |
| 713 |
RET |
| 714 |
%else |
| 715 |
rep ret |
| 716 |
%endif |
| 717 |
annotate_function_size |
| 718 |
%endmacro |
| 719 |
|
| 720 |
%define last_branch_adr $$ |
| 721 |
%macro AUTO_REP_RET 0 |
| 722 |
%if notcpuflag(ssse3) |
| 723 |
times ((last_branch_adr-$)>>31)+1 rep ; times 1 iff $ == last_branch_adr. |
| 724 |
%endif |
| 725 |
ret |
| 726 |
annotate_function_size |
| 727 |
%endmacro |
| 728 |
|
| 729 |
%macro BRANCH_INSTR 0-* |
| 730 |
%rep %0 |
| 731 |
%macro %1 1-2 %1 |
| 732 |
%2 %1 |
| 733 |
%if notcpuflag(ssse3) |
| 734 |
%%branch_instr equ $ |
| 735 |
%xdefine last_branch_adr %%branch_instr |
| 736 |
%endif |
| 737 |
%endmacro |
| 738 |
%rotate 1 |
| 739 |
%endrep |
| 740 |
%endmacro |
| 741 |
|
| 742 |
BRANCH_INSTR jz, je, jnz, jne, jl, jle, jnl, jnle, jg, jge, jng, jnge, ja, jae, jna, jnae, jb, jbe, jnb, jnbe, jc, jnc, js, jns, jo, jno, jp, jnp |
| 743 |
|
| 744 |
%macro TAIL_CALL 1-2 1 ; callee, is_nonadjacent |
| 745 |
%if has_epilogue |
| 746 |
call %1 |
| 747 |
RET |
| 748 |
%elif %2 |
| 749 |
jmp %1 |
| 750 |
%endif |
| 751 |
annotate_function_size |
| 752 |
%endmacro |
| 753 |
|
| 754 |
;============================================================================= |
| 755 |
; arch-independent part |
| 756 |
;============================================================================= |
| 757 |
|
| 758 |
%assign function_align 16 |
| 759 |
|
| 760 |
; Begin a function. |
| 761 |
; Applies any symbol mangling needed for C linkage, and sets up a define such that |
| 762 |
; subsequent uses of the function name automatically refer to the mangled version. |
| 763 |
; Appends cpuflags to the function name if cpuflags has been specified. |
| 764 |
; The "" empty default parameter is a workaround for nasm, which fails if SUFFIX |
| 765 |
; is empty and we call cglobal_internal with just %1 %+ SUFFIX (without %2). |
| 766 |
%macro cglobal 1-2+ "" ; name, [PROLOGUE args] |
| 767 |
cglobal_internal 1, %1 %+ SUFFIX, %2 |
| 768 |
%endmacro |
| 769 |
%macro cvisible 1-2+ "" ; name, [PROLOGUE args] |
| 770 |
cglobal_internal 0, %1 %+ SUFFIX, %2 |
| 771 |
%endmacro |
| 772 |
%macro cglobal_internal 2-3+ |
| 773 |
annotate_function_size |
| 774 |
%ifndef cglobaled_%2 |
| 775 |
%if %1 |
| 776 |
%xdefine %2 mangle(private_prefix %+ _ %+ %2) |
| 777 |
%else |
| 778 |
%xdefine %2 mangle(public_prefix %+ _ %+ %2) |
| 779 |
%endif |
| 780 |
%xdefine %2.skip_prologue %2 %+ .skip_prologue |
| 781 |
CAT_XDEFINE cglobaled_, %2, 1 |
| 782 |
%endif |
| 783 |
%xdefine current_function %2 |
| 784 |
%xdefine current_function_section __SECT__ |
| 785 |
%if FORMAT_ELF |
| 786 |
%if %1 |
| 787 |
global %2:function hidden |
| 788 |
%else |
| 789 |
global %2:function |
| 790 |
%endif |
| 791 |
%elif FORMAT_MACHO && HAVE_PRIVATE_EXTERN && %1 |
| 792 |
global %2:private_extern |
| 793 |
%else |
| 794 |
global %2 |
| 795 |
%endif |
| 796 |
align function_align |
| 797 |
%2: |
| 798 |
RESET_MM_PERMUTATION ; needed for x86-64, also makes disassembly somewhat nicer |
| 799 |
%xdefine rstk rsp ; copy of the original stack pointer, used when greater alignment than the known stack alignment is required |
| 800 |
%assign stack_offset 0 ; stack pointer offset relative to the return address |
| 801 |
%assign stack_size 0 ; amount of stack space that can be freely used inside a function |
| 802 |
%assign stack_size_padded 0 ; total amount of allocated stack space, including space for callee-saved xmm registers on WIN64 and alignment padding |
| 803 |
%assign xmm_regs_used 0 ; number of XMM registers requested, used for dealing with callee-saved registers on WIN64 and vzeroupper |
| 804 |
%ifnidn %3, "" |
| 805 |
PROLOGUE %3 |
| 806 |
%endif |
| 807 |
%endmacro |
| 808 |
|
| 809 |
; Create a global symbol from a local label with the correct name mangling and type |
| 810 |
%macro cglobal_label 1 |
| 811 |
%if FORMAT_ELF |
| 812 |
global current_function %+ %1:function hidden |
| 813 |
%elif FORMAT_MACHO && HAVE_PRIVATE_EXTERN |
| 814 |
global current_function %+ %1:private_extern |
| 815 |
%else |
| 816 |
global current_function %+ %1 |
| 817 |
%endif |
| 818 |
%1: |
| 819 |
%endmacro |
| 820 |
|
| 821 |
%macro cextern 1 |
| 822 |
%xdefine %1 mangle(private_prefix %+ _ %+ %1) |
| 823 |
CAT_XDEFINE cglobaled_, %1, 1 |
| 824 |
extern %1 |
| 825 |
%endmacro |
| 826 |
|
| 827 |
; like cextern, but without the prefix |
| 828 |
%macro cextern_naked 1 |
| 829 |
%ifdef PREFIX |
| 830 |
%xdefine %1 mangle(%1) |
| 831 |
%endif |
| 832 |
CAT_XDEFINE cglobaled_, %1, 1 |
| 833 |
extern %1 |
| 834 |
%endmacro |
| 835 |
|
| 836 |
%macro const 1-2+ |
| 837 |
%xdefine %1 mangle(private_prefix %+ _ %+ %1) |
| 838 |
%if FORMAT_ELF |
| 839 |
global %1:data hidden |
| 840 |
%elif FORMAT_MACHO && HAVE_PRIVATE_EXTERN |
| 841 |
global %1:private_extern |
| 842 |
%else |
| 843 |
global %1 |
| 844 |
%endif |
| 845 |
%1: %2 |
| 846 |
%endmacro |
| 847 |
|
| 848 |
; This is needed for ELF, otherwise the GNU linker assumes the stack is executable by default. |
| 849 |
%if FORMAT_ELF |
| 850 |
[SECTION .note.GNU-stack noalloc noexec nowrite progbits] |
| 851 |
%endif |
| 852 |
|
| 853 |
; Tell debuggers how large the function was. |
| 854 |
; This may be invoked multiple times per function; we rely on later instances overriding earlier ones. |
| 855 |
; This is invoked by RET and similar macros, and also cglobal does it for the previous function, |
| 856 |
; but if the last function in a source file doesn't use any of the standard macros for its epilogue, |
| 857 |
; then its size might be unspecified. |
| 858 |
%macro annotate_function_size 0 |
| 859 |
%ifdef __YASM_VER__ |
| 860 |
%ifdef current_function |
| 861 |
%if FORMAT_ELF |
| 862 |
current_function_section |
| 863 |
%%ecf equ $ |
| 864 |
size current_function %%ecf - current_function |
| 865 |
__SECT__ |
| 866 |
%endif |
| 867 |
%endif |
| 868 |
%endif |
| 869 |
%endmacro |
| 870 |
|
| 871 |
; cpuflags |
| 872 |
|
| 873 |
%assign cpuflags_mmx (1<<0) |
| 874 |
%assign cpuflags_mmx2 (1<<1) | cpuflags_mmx |
| 875 |
%assign cpuflags_3dnow (1<<2) | cpuflags_mmx |
| 876 |
%assign cpuflags_3dnowext (1<<3) | cpuflags_3dnow |
| 877 |
%assign cpuflags_sse (1<<4) | cpuflags_mmx2 |
| 878 |
%assign cpuflags_sse2 (1<<5) | cpuflags_sse |
| 879 |
%assign cpuflags_sse2slow (1<<6) | cpuflags_sse2 |
| 880 |
%assign cpuflags_lzcnt (1<<7) | cpuflags_sse2 |
| 881 |
%assign cpuflags_sse3 (1<<8) | cpuflags_sse2 |
| 882 |
%assign cpuflags_ssse3 (1<<9) | cpuflags_sse3 |
| 883 |
%assign cpuflags_sse4 (1<<10) | cpuflags_ssse3 |
| 884 |
%assign cpuflags_sse42 (1<<11) | cpuflags_sse4 |
| 885 |
%assign cpuflags_aesni (1<<12) | cpuflags_sse42 |
| 886 |
%assign cpuflags_gfni (1<<13) | cpuflags_sse42 |
| 887 |
%assign cpuflags_avx (1<<14) | cpuflags_sse42 |
| 888 |
%assign cpuflags_xop (1<<15) | cpuflags_avx |
| 889 |
%assign cpuflags_fma4 (1<<16) | cpuflags_avx |
| 890 |
%assign cpuflags_fma3 (1<<17) | cpuflags_avx |
| 891 |
%assign cpuflags_bmi1 (1<<18) | cpuflags_avx|cpuflags_lzcnt |
| 892 |
%assign cpuflags_bmi2 (1<<19) | cpuflags_bmi1 |
| 893 |
%assign cpuflags_avx2 (1<<20) | cpuflags_fma3|cpuflags_bmi2 |
| 894 |
%assign cpuflags_avx512 (1<<21) | cpuflags_avx2 ; F, CD, BW, DQ, VL |
| 895 |
%assign cpuflags_avx512icl (1<<22) | cpuflags_avx512|cpuflags_gfni ; VNNI, IFMA, VBMI, VBMI2, VPOPCNTDQ, BITALG, VAES, VPCLMULQDQ |
| 896 |
|
| 897 |
%assign cpuflags_cache32 (1<<23) |
| 898 |
%assign cpuflags_cache64 (1<<24) |
| 899 |
%assign cpuflags_aligned (1<<25) ; not a cpu feature, but a function variant |
| 900 |
%assign cpuflags_atom (1<<26) |
| 901 |
|
| 902 |
; Returns a boolean value expressing whether or not the specified cpuflag is enabled. |
| 903 |
%define cpuflag(x) (((((cpuflags & (cpuflags_ %+ x)) ^ (cpuflags_ %+ x)) - 1) >> 31) & 1) |
| 904 |
%define notcpuflag(x) (cpuflag(x) ^ 1) |
| 905 |
|
| 906 |
; Takes an arbitrary number of cpuflags from the above list. |
| 907 |
; All subsequent functions (up to the next INIT_CPUFLAGS) is built for the specified cpu. |
| 908 |
; You shouldn't need to invoke this macro directly, it's a subroutine for INIT_MMX &co. |
| 909 |
%macro INIT_CPUFLAGS 0-* |
| 910 |
%xdefine SUFFIX |
| 911 |
%undef cpuname |
| 912 |
%assign cpuflags 0 |
| 913 |
|
| 914 |
%if %0 >= 1 |
| 915 |
%rep %0 |
| 916 |
%ifdef cpuname |
| 917 |
%xdefine cpuname cpuname %+ _%1 |
| 918 |
%else |
| 919 |
%xdefine cpuname %1 |
| 920 |
%endif |
| 921 |
%assign cpuflags cpuflags | cpuflags_%1 |
| 922 |
%rotate 1 |
| 923 |
%endrep |
| 924 |
%xdefine SUFFIX _ %+ cpuname |
| 925 |
|
| 926 |
%if cpuflag(avx) |
| 927 |
%assign avx_enabled 1 |
| 928 |
%endif |
| 929 |
%if (mmsize == 16 && notcpuflag(sse2)) || (mmsize == 32 && notcpuflag(avx2)) |
| 930 |
%define mova movaps |
| 931 |
%define movu movups |
| 932 |
%define movnta movntps |
| 933 |
%endif |
| 934 |
%if cpuflag(aligned) |
| 935 |
%define movu mova |
| 936 |
%elif cpuflag(sse3) && notcpuflag(ssse3) |
| 937 |
%define movu lddqu |
| 938 |
%endif |
| 939 |
%endif |
| 940 |
|
| 941 |
%if ARCH_X86_64 || cpuflag(sse2) |
| 942 |
%ifdef __NASM_VER__ |
| 943 |
ALIGNMODE p6 |
| 944 |
%else |
| 945 |
CPU amdnop |
| 946 |
%endif |
| 947 |
%else |
| 948 |
%ifdef __NASM_VER__ |
| 949 |
ALIGNMODE nop |
| 950 |
%else |
| 951 |
CPU basicnop |
| 952 |
%endif |
| 953 |
%endif |
| 954 |
%endmacro |
| 955 |
|
| 956 |
; Merge mmx, sse*, and avx* |
| 957 |
; m# is a simd register of the currently selected size |
| 958 |
; xm# is the corresponding xmm register if mmsize >= 16, otherwise the same as m# |
| 959 |
; ym# is the corresponding ymm register if mmsize >= 32, otherwise the same as m# |
| 960 |
; zm# is the corresponding zmm register if mmsize >= 64, otherwise the same as m# |
| 961 |
; (All 4 remain in sync through SWAP.) |
| 962 |
|
| 963 |
%macro CAT_XDEFINE 3 |
| 964 |
%xdefine %1%2 %3 |
| 965 |
%endmacro |
| 966 |
|
| 967 |
%macro CAT_UNDEF 2 |
| 968 |
%undef %1%2 |
| 969 |
%endmacro |
| 970 |
|
| 971 |
%macro DEFINE_MMREGS 1 ; mmtype |
| 972 |
%assign %%prev_mmregs 0 |
| 973 |
%ifdef num_mmregs |
| 974 |
%assign %%prev_mmregs num_mmregs |
| 975 |
%endif |
| 976 |
|
| 977 |
%assign num_mmregs 8 |
| 978 |
%if ARCH_X86_64 && mmsize >= 16 |
| 979 |
%assign num_mmregs 16 |
| 980 |
%if cpuflag(avx512) || mmsize == 64 |
| 981 |
%assign num_mmregs 32 |
| 982 |
%endif |
| 983 |
%endif |
| 984 |
|
| 985 |
%assign %%i 0 |
| 986 |
%rep num_mmregs |
| 987 |
CAT_XDEFINE m, %%i, %1 %+ %%i |
| 988 |
CAT_XDEFINE nn%1, %%i, %%i |
| 989 |
%assign %%i %%i+1 |
| 990 |
%endrep |
| 991 |
%if %%prev_mmregs > num_mmregs |
| 992 |
%rep %%prev_mmregs - num_mmregs |
| 993 |
CAT_UNDEF m, %%i |
| 994 |
CAT_UNDEF nn %+ mmtype, %%i |
| 995 |
%assign %%i %%i+1 |
| 996 |
%endrep |
| 997 |
%endif |
| 998 |
%xdefine mmtype %1 |
| 999 |
%endmacro |
| 1000 |
|
| 1001 |
; Prefer registers 16-31 over 0-15 to avoid having to use vzeroupper |
| 1002 |
%macro AVX512_MM_PERMUTATION 0-1 0 ; start_reg |
| 1003 |
%if ARCH_X86_64 && cpuflag(avx512) |
| 1004 |
%assign %%i %1 |
| 1005 |
%rep 16-%1 |
| 1006 |
%assign %%i_high %%i+16 |
| 1007 |
SWAP %%i, %%i_high |
| 1008 |
%assign %%i %%i+1 |
| 1009 |
%endrep |
| 1010 |
%endif |
| 1011 |
%endmacro |
| 1012 |
|
| 1013 |
%macro INIT_MMX 0-1+ |
| 1014 |
%assign avx_enabled 0 |
| 1015 |
%define RESET_MM_PERMUTATION INIT_MMX %1 |
| 1016 |
%define mmsize 8 |
| 1017 |
%define mova movq |
| 1018 |
%define movu movq |
| 1019 |
%define movh movd |
| 1020 |
%define movnta movntq |
| 1021 |
INIT_CPUFLAGS %1 |
| 1022 |
DEFINE_MMREGS mm |
| 1023 |
%endmacro |
| 1024 |
|
| 1025 |
%macro INIT_XMM 0-1+ |
| 1026 |
%assign avx_enabled FORCE_VEX_ENCODING |
| 1027 |
%define RESET_MM_PERMUTATION INIT_XMM %1 |
| 1028 |
%define mmsize 16 |
| 1029 |
%define mova movdqa |
| 1030 |
%define movu movdqu |
| 1031 |
%define movh movq |
| 1032 |
%define movnta movntdq |
| 1033 |
INIT_CPUFLAGS %1 |
| 1034 |
DEFINE_MMREGS xmm |
| 1035 |
%if WIN64 |
| 1036 |
AVX512_MM_PERMUTATION 6 ; Swap callee-saved registers with volatile registers |
| 1037 |
%endif |
| 1038 |
%xdefine bcstd 1to4 |
| 1039 |
%xdefine bcstq 1to2 |
| 1040 |
%endmacro |
| 1041 |
|
| 1042 |
%macro INIT_YMM 0-1+ |
| 1043 |
%assign avx_enabled 1 |
| 1044 |
%define RESET_MM_PERMUTATION INIT_YMM %1 |
| 1045 |
%define mmsize 32 |
| 1046 |
%define mova movdqa |
| 1047 |
%define movu movdqu |
| 1048 |
%undef movh |
| 1049 |
%define movnta movntdq |
| 1050 |
INIT_CPUFLAGS %1 |
| 1051 |
DEFINE_MMREGS ymm |
| 1052 |
AVX512_MM_PERMUTATION |
| 1053 |
%xdefine bcstd 1to8 |
| 1054 |
%xdefine bcstq 1to4 |
| 1055 |
%endmacro |
| 1056 |
|
| 1057 |
%macro INIT_ZMM 0-1+ |
| 1058 |
%assign avx_enabled 1 |
| 1059 |
%define RESET_MM_PERMUTATION INIT_ZMM %1 |
| 1060 |
%define mmsize 64 |
| 1061 |
%define mova movdqa |
| 1062 |
%define movu movdqu |
| 1063 |
%undef movh |
| 1064 |
%define movnta movntdq |
| 1065 |
INIT_CPUFLAGS %1 |
| 1066 |
DEFINE_MMREGS zmm |
| 1067 |
AVX512_MM_PERMUTATION |
| 1068 |
%xdefine bcstd 1to16 |
| 1069 |
%xdefine bcstq 1to8 |
| 1070 |
%endmacro |
| 1071 |
|
| 1072 |
INIT_XMM |
| 1073 |
|
| 1074 |
%macro DECLARE_MMCAST 1 |
| 1075 |
%define mmmm%1 mm%1 |
| 1076 |
%define mmxmm%1 mm%1 |
| 1077 |
%define mmymm%1 mm%1 |
| 1078 |
%define mmzmm%1 mm%1 |
| 1079 |
%define xmmmm%1 mm%1 |
| 1080 |
%define xmmxmm%1 xmm%1 |
| 1081 |
%define xmmymm%1 xmm%1 |
| 1082 |
%define xmmzmm%1 xmm%1 |
| 1083 |
%define ymmmm%1 mm%1 |
| 1084 |
%define ymmxmm%1 xmm%1 |
| 1085 |
%define ymmymm%1 ymm%1 |
| 1086 |
%define ymmzmm%1 ymm%1 |
| 1087 |
%define zmmmm%1 mm%1 |
| 1088 |
%define zmmxmm%1 xmm%1 |
| 1089 |
%define zmmymm%1 ymm%1 |
| 1090 |
%define zmmzmm%1 zmm%1 |
| 1091 |
%define xm%1 xmm %+ m%1 |
| 1092 |
%define ym%1 ymm %+ m%1 |
| 1093 |
%define zm%1 zmm %+ m%1 |
| 1094 |
%endmacro |
| 1095 |
|
| 1096 |
%assign i 0 |
| 1097 |
%rep 32 |
| 1098 |
DECLARE_MMCAST i |
| 1099 |
%assign i i+1 |
| 1100 |
%endrep |
| 1101 |
|
| 1102 |
; I often want to use macros that permute their arguments. e.g. there's no |
| 1103 |
; efficient way to implement butterfly or transpose or dct without swapping some |
| 1104 |
; arguments. |
| 1105 |
; |
| 1106 |
; I would like to not have to manually keep track of the permutations: |
| 1107 |
; If I insert a permutation in the middle of a function, it should automatically |
| 1108 |
; change everything that follows. For more complex macros I may also have multiple |
| 1109 |
; implementations, e.g. the SSE2 and SSSE3 versions may have different permutations. |
| 1110 |
; |
| 1111 |
; Hence these macros. Insert a PERMUTE or some SWAPs at the end of a macro that |
| 1112 |
; permutes its arguments. It's equivalent to exchanging the contents of the |
| 1113 |
; registers, except that this way you exchange the register names instead, so it |
| 1114 |
; doesn't cost any cycles. |
| 1115 |
|
| 1116 |
%macro PERMUTE 2-* ; takes a list of pairs to swap |
| 1117 |
%rep %0/2 |
| 1118 |
%xdefine %%tmp%2 m%2 |
| 1119 |
%rotate 2 |
| 1120 |
%endrep |
| 1121 |
%rep %0/2 |
| 1122 |
%xdefine m%1 %%tmp%2 |
| 1123 |
CAT_XDEFINE nn, m%1, %1 |
| 1124 |
%rotate 2 |
| 1125 |
%endrep |
| 1126 |
%endmacro |
| 1127 |
|
| 1128 |
%macro SWAP 2+ ; swaps a single chain (sometimes more concise than pairs) |
| 1129 |
%ifnum %1 ; SWAP 0, 1, ... |
| 1130 |
SWAP_INTERNAL_NUM %1, %2 |
| 1131 |
%else ; SWAP m0, m1, ... |
| 1132 |
SWAP_INTERNAL_NAME %1, %2 |
| 1133 |
%endif |
| 1134 |
%endmacro |
| 1135 |
|
| 1136 |
%macro SWAP_INTERNAL_NUM 2-* |
| 1137 |
%rep %0-1 |
| 1138 |
%xdefine %%tmp m%1 |
| 1139 |
%xdefine m%1 m%2 |
| 1140 |
%xdefine m%2 %%tmp |
| 1141 |
CAT_XDEFINE nn, m%1, %1 |
| 1142 |
CAT_XDEFINE nn, m%2, %2 |
| 1143 |
%rotate 1 |
| 1144 |
%endrep |
| 1145 |
%endmacro |
| 1146 |
|
| 1147 |
%macro SWAP_INTERNAL_NAME 2-* |
| 1148 |
%xdefine %%args nn %+ %1 |
| 1149 |
%rep %0-1 |
| 1150 |
%xdefine %%args %%args, nn %+ %2 |
| 1151 |
%rotate 1 |
| 1152 |
%endrep |
| 1153 |
SWAP_INTERNAL_NUM %%args |
| 1154 |
%endmacro |
| 1155 |
|
| 1156 |
; If SAVE_MM_PERMUTATION is placed at the end of a function, then any later |
| 1157 |
; calls to that function will automatically load the permutation, so values can |
| 1158 |
; be returned in mmregs. |
| 1159 |
%macro SAVE_MM_PERMUTATION 0-1 |
| 1160 |
%if %0 |
| 1161 |
%xdefine %%f %1_m |
| 1162 |
%else |
| 1163 |
%xdefine %%f current_function %+ _m |
| 1164 |
%endif |
| 1165 |
%assign %%i 0 |
| 1166 |
%rep num_mmregs |
| 1167 |
%xdefine %%tmp m %+ %%i |
| 1168 |
CAT_XDEFINE %%f, %%i, regnumof %+ %%tmp |
| 1169 |
%assign %%i %%i+1 |
| 1170 |
%endrep |
| 1171 |
%endmacro |
| 1172 |
|
| 1173 |
%macro LOAD_MM_PERMUTATION 0-1 ; name to load from |
| 1174 |
%if %0 |
| 1175 |
%xdefine %%f %1_m |
| 1176 |
%else |
| 1177 |
%xdefine %%f current_function %+ _m |
| 1178 |
%endif |
| 1179 |
%xdefine %%tmp %%f %+ 0 |
| 1180 |
%ifnum %%tmp |
| 1181 |
DEFINE_MMREGS mmtype |
| 1182 |
%assign %%i 0 |
| 1183 |
%rep num_mmregs |
| 1184 |
%xdefine %%tmp %%f %+ %%i |
| 1185 |
CAT_XDEFINE %%m, %%i, m %+ %%tmp |
| 1186 |
%assign %%i %%i+1 |
| 1187 |
%endrep |
| 1188 |
%rep num_mmregs |
| 1189 |
%assign %%i %%i-1 |
| 1190 |
CAT_XDEFINE m, %%i, %%m %+ %%i |
| 1191 |
CAT_XDEFINE nn, m %+ %%i, %%i |
| 1192 |
%endrep |
| 1193 |
%endif |
| 1194 |
%endmacro |
| 1195 |
|
| 1196 |
; Append cpuflags to the callee's name iff the appended name is known and the plain name isn't |
| 1197 |
%macro call 1 |
| 1198 |
%ifid %1 |
| 1199 |
call_internal %1 %+ SUFFIX, %1 |
| 1200 |
%else |
| 1201 |
call %1 |
| 1202 |
%endif |
| 1203 |
%endmacro |
| 1204 |
%macro call_internal 2 |
| 1205 |
%xdefine %%i %2 |
| 1206 |
%ifndef cglobaled_%2 |
| 1207 |
%ifdef cglobaled_%1 |
| 1208 |
%xdefine %%i %1 |
| 1209 |
%endif |
| 1210 |
%endif |
| 1211 |
call %%i |
| 1212 |
LOAD_MM_PERMUTATION %%i |
| 1213 |
%endmacro |
| 1214 |
|
| 1215 |
; Substitutions that reduce instruction size but are functionally equivalent |
| 1216 |
%macro add 2 |
| 1217 |
%ifnum %2 |
| 1218 |
%if %2==128 |
| 1219 |
sub %1, -128 |
| 1220 |
%else |
| 1221 |
add %1, %2 |
| 1222 |
%endif |
| 1223 |
%else |
| 1224 |
add %1, %2 |
| 1225 |
%endif |
| 1226 |
%endmacro |
| 1227 |
|
| 1228 |
%macro sub 2 |
| 1229 |
%ifnum %2 |
| 1230 |
%if %2==128 |
| 1231 |
add %1, -128 |
| 1232 |
%else |
| 1233 |
sub %1, %2 |
| 1234 |
%endif |
| 1235 |
%else |
| 1236 |
sub %1, %2 |
| 1237 |
%endif |
| 1238 |
%endmacro |
| 1239 |
|
| 1240 |
;============================================================================= |
| 1241 |
; AVX abstraction layer |
| 1242 |
;============================================================================= |
| 1243 |
|
| 1244 |
%assign i 0 |
| 1245 |
%rep 32 |
| 1246 |
%if i < 8 |
| 1247 |
CAT_XDEFINE sizeofmm, i, 8 |
| 1248 |
CAT_XDEFINE regnumofmm, i, i |
| 1249 |
%endif |
| 1250 |
CAT_XDEFINE sizeofxmm, i, 16 |
| 1251 |
CAT_XDEFINE sizeofymm, i, 32 |
| 1252 |
CAT_XDEFINE sizeofzmm, i, 64 |
| 1253 |
CAT_XDEFINE regnumofxmm, i, i |
| 1254 |
CAT_XDEFINE regnumofymm, i, i |
| 1255 |
CAT_XDEFINE regnumofzmm, i, i |
| 1256 |
%assign i i+1 |
| 1257 |
%endrep |
| 1258 |
%undef i |
| 1259 |
|
| 1260 |
%macro CHECK_AVX_INSTR_EMU 3-* |
| 1261 |
%xdefine %%opcode %1 |
| 1262 |
%xdefine %%dst %2 |
| 1263 |
%rep %0-2 |
| 1264 |
%ifidn %%dst, %3 |
| 1265 |
%error non-avx emulation of ``%%opcode'' is not supported |
| 1266 |
%endif |
| 1267 |
%rotate 1 |
| 1268 |
%endrep |
| 1269 |
%endmacro |
| 1270 |
|
| 1271 |
;%1 == instruction |
| 1272 |
;%2 == minimal instruction set |
| 1273 |
;%3 == 1 if float, 0 if int |
| 1274 |
;%4 == 1 if 4-operand emulation, 0 if 3-operand emulation, 255 otherwise (no emulation) |
| 1275 |
;%5 == 1 if commutative (i.e. doesn't matter which src arg is which), 0 if not |
| 1276 |
;%6+: operands |
| 1277 |
%macro RUN_AVX_INSTR 6-9+ |
| 1278 |
%ifnum sizeof%7 |
| 1279 |
%assign __sizeofreg sizeof%7 |
| 1280 |
%elifnum sizeof%6 |
| 1281 |
%assign __sizeofreg sizeof%6 |
| 1282 |
%else |
| 1283 |
%assign __sizeofreg mmsize |
| 1284 |
%endif |
| 1285 |
%assign __emulate_avx 0 |
| 1286 |
%if avx_enabled && __sizeofreg >= 16 |
| 1287 |
%xdefine __instr v%1 |
| 1288 |
%else |
| 1289 |
%xdefine __instr %1 |
| 1290 |
%if %0 >= 8+%4 |
| 1291 |
%assign __emulate_avx 1 |
| 1292 |
%endif |
| 1293 |
%endif |
| 1294 |
%ifnidn %2, fnord |
| 1295 |
%ifdef cpuname |
| 1296 |
%if notcpuflag(%2) |
| 1297 |
%error use of ``%1'' %2 instruction in cpuname function: current_function |
| 1298 |
%elif %3 == 0 && __sizeofreg == 16 && notcpuflag(sse2) |
| 1299 |
%error use of ``%1'' sse2 instruction in cpuname function: current_function |
| 1300 |
%elif %3 == 0 && __sizeofreg == 32 && notcpuflag(avx2) |
| 1301 |
%error use of ``%1'' avx2 instruction in cpuname function: current_function |
| 1302 |
%elif __sizeofreg == 16 && notcpuflag(sse) |
| 1303 |
%error use of ``%1'' sse instruction in cpuname function: current_function |
| 1304 |
%elif __sizeofreg == 32 && notcpuflag(avx) |
| 1305 |
%error use of ``%1'' avx instruction in cpuname function: current_function |
| 1306 |
%elif __sizeofreg == 64 && notcpuflag(avx512) |
| 1307 |
%error use of ``%1'' avx512 instruction in cpuname function: current_function |
| 1308 |
%elifidn %1, pextrw ; special case because the base instruction is mmx2, |
| 1309 |
%ifnid %6 ; but sse4 is required for memory operands |
| 1310 |
%if notcpuflag(sse4) |
| 1311 |
%error use of ``%1'' sse4 instruction in cpuname function: current_function |
| 1312 |
%endif |
| 1313 |
%endif |
| 1314 |
%endif |
| 1315 |
%endif |
| 1316 |
%endif |
| 1317 |
|
| 1318 |
%if __emulate_avx |
| 1319 |
%xdefine __src1 %7 |
| 1320 |
%xdefine __src2 %8 |
| 1321 |
%if %5 && %4 == 0 |
| 1322 |
%ifnidn %6, %7 |
| 1323 |
%ifidn %6, %8 |
| 1324 |
%xdefine __src1 %8 |
| 1325 |
%xdefine __src2 %7 |
| 1326 |
%elifnnum sizeof%8 |
| 1327 |
; 3-operand AVX instructions with a memory arg can only have it in src2, |
| 1328 |
; whereas SSE emulation prefers to have it in src1 (i.e. the mov). |
| 1329 |
; So, if the instruction is commutative with a memory arg, swap them. |
| 1330 |
%xdefine __src1 %8 |
| 1331 |
%xdefine __src2 %7 |
| 1332 |
%endif |
| 1333 |
%endif |
| 1334 |
%endif |
| 1335 |
%ifnidn %6, __src1 |
| 1336 |
%if %0 >= 9 |
| 1337 |
CHECK_AVX_INSTR_EMU {%1 %6, %7, %8, %9}, %6, __src2, %9 |
| 1338 |
%else |
| 1339 |
CHECK_AVX_INSTR_EMU {%1 %6, %7, %8}, %6, __src2 |
| 1340 |
%endif |
| 1341 |
%if __sizeofreg == 8 |
| 1342 |
MOVQ %6, __src1 |
| 1343 |
%elif %3 |
| 1344 |
MOVAPS %6, __src1 |
| 1345 |
%else |
| 1346 |
MOVDQA %6, __src1 |
| 1347 |
%endif |
| 1348 |
%endif |
| 1349 |
%if %0 >= 9 |
| 1350 |
%1 %6, __src2, %9 |
| 1351 |
%else |
| 1352 |
%1 %6, __src2 |
| 1353 |
%endif |
| 1354 |
%elif %0 >= 9 |
| 1355 |
%if avx_enabled && __sizeofreg >= 16 && %4 == 1 |
| 1356 |
%ifnnum regnumof%7 |
| 1357 |
%if %3 |
| 1358 |
vmovaps %6, %7 |
| 1359 |
%else |
| 1360 |
vmovdqa %6, %7 |
| 1361 |
%endif |
| 1362 |
__instr %6, %6, %8, %9 |
| 1363 |
%else |
| 1364 |
__instr %6, %7, %8, %9 |
| 1365 |
%endif |
| 1366 |
%else |
| 1367 |
__instr %6, %7, %8, %9 |
| 1368 |
%endif |
| 1369 |
%elif %0 == 8 |
| 1370 |
%if avx_enabled && __sizeofreg >= 16 && %4 == 0 |
| 1371 |
%xdefine __src1 %7 |
| 1372 |
%xdefine __src2 %8 |
| 1373 |
%if %5 |
| 1374 |
%ifnum regnumof%7 |
| 1375 |
%ifnum regnumof%8 |
| 1376 |
%if regnumof%7 < 8 && regnumof%8 >= 8 && regnumof%8 < 16 && sizeof%8 <= 32 |
| 1377 |
; Most VEX-encoded instructions require an additional byte to encode when |
| 1378 |
; src2 is a high register (e.g. m8..15). If the instruction is commutative |
| 1379 |
; we can swap src1 and src2 when doing so reduces the instruction length. |
| 1380 |
%xdefine __src1 %8 |
| 1381 |
%xdefine __src2 %7 |
| 1382 |
%endif |
| 1383 |
%endif |
| 1384 |
%elifnum regnumof%8 ; put memory operands in src2 when possible |
| 1385 |
%xdefine __src1 %8 |
| 1386 |
%xdefine __src2 %7 |
| 1387 |
%else |
| 1388 |
%assign __emulate_avx 1 |
| 1389 |
%endif |
| 1390 |
%elifnnum regnumof%7 |
| 1391 |
; EVEX allows imm8 shift instructions to be used with memory operands, |
| 1392 |
; but VEX does not. This handles those special cases. |
| 1393 |
%ifnnum %8 |
| 1394 |
%assign __emulate_avx 1 |
| 1395 |
%elif notcpuflag(avx512) |
| 1396 |
%assign __emulate_avx 1 |
| 1397 |
%endif |
| 1398 |
%endif |
| 1399 |
%if __emulate_avx ; a separate load is required |
| 1400 |
%if %3 |
| 1401 |
vmovaps %6, %7 |
| 1402 |
%else |
| 1403 |
vmovdqa %6, %7 |
| 1404 |
%endif |
| 1405 |
__instr %6, %6, %8 |
| 1406 |
%else |
| 1407 |
__instr %6, __src1, __src2 |
| 1408 |
%endif |
| 1409 |
%else |
| 1410 |
__instr %6, %7, %8 |
| 1411 |
%endif |
| 1412 |
%elif %0 == 7 |
| 1413 |
%if avx_enabled && __sizeofreg >= 16 && %5 |
| 1414 |
%xdefine __src1 %6 |
| 1415 |
%xdefine __src2 %7 |
| 1416 |
%ifnum regnumof%6 |
| 1417 |
%ifnum regnumof%7 |
| 1418 |
%if regnumof%6 < 8 && regnumof%7 >= 8 && regnumof%7 < 16 && sizeof%7 <= 32 |
| 1419 |
%xdefine __src1 %7 |
| 1420 |
%xdefine __src2 %6 |
| 1421 |
%endif |
| 1422 |
%endif |
| 1423 |
%endif |
| 1424 |
__instr %6, __src1, __src2 |
| 1425 |
%else |
| 1426 |
__instr %6, %7 |
| 1427 |
%endif |
| 1428 |
%else |
| 1429 |
__instr %6 |
| 1430 |
%endif |
| 1431 |
%endmacro |
| 1432 |
|
| 1433 |
;%1 == instruction |
| 1434 |
;%2 == minimal instruction set |
| 1435 |
;%3 == 1 if float, 0 if int |
| 1436 |
;%4 == 1 if 4-operand emulation, 0 if 3-operand emulation, 255 otherwise (no emulation) |
| 1437 |
;%5 == 1 if commutative (i.e. doesn't matter which src arg is which), 0 if not |
| 1438 |
%macro AVX_INSTR 1-5 fnord, 0, 255, 0 |
| 1439 |
%macro %1 1-10 fnord, fnord, fnord, fnord, %1, %2, %3, %4, %5 |
| 1440 |
%ifidn %2, fnord |
| 1441 |
RUN_AVX_INSTR %6, %7, %8, %9, %10, %1 |
| 1442 |
%elifidn %3, fnord |
| 1443 |
RUN_AVX_INSTR %6, %7, %8, %9, %10, %1, %2 |
| 1444 |
%elifidn %4, fnord |
| 1445 |
RUN_AVX_INSTR %6, %7, %8, %9, %10, %1, %2, %3 |
| 1446 |
%elifidn %5, fnord |
| 1447 |
RUN_AVX_INSTR %6, %7, %8, %9, %10, %1, %2, %3, %4 |
| 1448 |
%else |
| 1449 |
RUN_AVX_INSTR %6, %7, %8, %9, %10, %1, %2, %3, %4, %5 |
| 1450 |
%endif |
| 1451 |
%endmacro |
| 1452 |
%endmacro |
| 1453 |
|
| 1454 |
; Instructions with both VEX/EVEX and legacy encodings |
| 1455 |
; Non-destructive instructions are written without parameters |
| 1456 |
AVX_INSTR addpd, sse2, 1, 0, 1 |
| 1457 |
AVX_INSTR addps, sse, 1, 0, 1 |
| 1458 |
AVX_INSTR addsd, sse2, 1, 0, 0 |
| 1459 |
AVX_INSTR addss, sse, 1, 0, 0 |
| 1460 |
AVX_INSTR addsubpd, sse3, 1, 0, 0 |
| 1461 |
AVX_INSTR addsubps, sse3, 1, 0, 0 |
| 1462 |
AVX_INSTR aesdec, aesni, 0, 0, 0 |
| 1463 |
AVX_INSTR aesdeclast, aesni, 0, 0, 0 |
| 1464 |
AVX_INSTR aesenc, aesni, 0, 0, 0 |
| 1465 |
AVX_INSTR aesenclast, aesni, 0, 0, 0 |
| 1466 |
AVX_INSTR aesimc, aesni |
| 1467 |
AVX_INSTR aeskeygenassist, aesni |
| 1468 |
AVX_INSTR andnpd, sse2, 1, 0, 0 |
| 1469 |
AVX_INSTR andnps, sse, 1, 0, 0 |
| 1470 |
AVX_INSTR andpd, sse2, 1, 0, 1 |
| 1471 |
AVX_INSTR andps, sse, 1, 0, 1 |
| 1472 |
AVX_INSTR blendpd, sse4, 1, 1, 0 |
| 1473 |
AVX_INSTR blendps, sse4, 1, 1, 0 |
| 1474 |
AVX_INSTR blendvpd, sse4, 1, 1, 0 ; last operand must be xmm0 with legacy encoding |
| 1475 |
AVX_INSTR blendvps, sse4, 1, 1, 0 ; last operand must be xmm0 with legacy encoding |
| 1476 |
AVX_INSTR cmpeqpd, sse2, 1, 0, 1 |
| 1477 |
AVX_INSTR cmpeqps, sse, 1, 0, 1 |
| 1478 |
AVX_INSTR cmpeqsd, sse2, 1, 0, 0 |
| 1479 |
AVX_INSTR cmpeqss, sse, 1, 0, 0 |
| 1480 |
AVX_INSTR cmplepd, sse2, 1, 0, 0 |
| 1481 |
AVX_INSTR cmpleps, sse, 1, 0, 0 |
| 1482 |
AVX_INSTR cmplesd, sse2, 1, 0, 0 |
| 1483 |
AVX_INSTR cmpless, sse, 1, 0, 0 |
| 1484 |
AVX_INSTR cmpltpd, sse2, 1, 0, 0 |
| 1485 |
AVX_INSTR cmpltps, sse, 1, 0, 0 |
| 1486 |
AVX_INSTR cmpltsd, sse2, 1, 0, 0 |
| 1487 |
AVX_INSTR cmpltss, sse, 1, 0, 0 |
| 1488 |
AVX_INSTR cmpneqpd, sse2, 1, 0, 1 |
| 1489 |
AVX_INSTR cmpneqps, sse, 1, 0, 1 |
| 1490 |
AVX_INSTR cmpneqsd, sse2, 1, 0, 0 |
| 1491 |
AVX_INSTR cmpneqss, sse, 1, 0, 0 |
| 1492 |
AVX_INSTR cmpnlepd, sse2, 1, 0, 0 |
| 1493 |
AVX_INSTR cmpnleps, sse, 1, 0, 0 |
| 1494 |
AVX_INSTR cmpnlesd, sse2, 1, 0, 0 |
| 1495 |
AVX_INSTR cmpnless, sse, 1, 0, 0 |
| 1496 |
AVX_INSTR cmpnltpd, sse2, 1, 0, 0 |
| 1497 |
AVX_INSTR cmpnltps, sse, 1, 0, 0 |
| 1498 |
AVX_INSTR cmpnltsd, sse2, 1, 0, 0 |
| 1499 |
AVX_INSTR cmpnltss, sse, 1, 0, 0 |
| 1500 |
AVX_INSTR cmpordpd, sse2 1, 0, 1 |
| 1501 |
AVX_INSTR cmpordps, sse 1, 0, 1 |
| 1502 |
AVX_INSTR cmpordsd, sse2 1, 0, 0 |
| 1503 |
AVX_INSTR cmpordss, sse 1, 0, 0 |
| 1504 |
AVX_INSTR cmppd, sse2, 1, 1, 0 |
| 1505 |
AVX_INSTR cmpps, sse, 1, 1, 0 |
| 1506 |
AVX_INSTR cmpsd, sse2, 1, 1, 0 |
| 1507 |
AVX_INSTR cmpss, sse, 1, 1, 0 |
| 1508 |
AVX_INSTR cmpunordpd, sse2, 1, 0, 1 |
| 1509 |
AVX_INSTR cmpunordps, sse, 1, 0, 1 |
| 1510 |
AVX_INSTR cmpunordsd, sse2, 1, 0, 0 |
| 1511 |
AVX_INSTR cmpunordss, sse, 1, 0, 0 |
| 1512 |
AVX_INSTR comisd, sse2, 1 |
| 1513 |
AVX_INSTR comiss, sse, 1 |
| 1514 |
AVX_INSTR cvtdq2pd, sse2, 1 |
| 1515 |
AVX_INSTR cvtdq2ps, sse2, 1 |
| 1516 |
AVX_INSTR cvtpd2dq, sse2, 1 |
| 1517 |
AVX_INSTR cvtpd2ps, sse2, 1 |
| 1518 |
AVX_INSTR cvtps2dq, sse2, 1 |
| 1519 |
AVX_INSTR cvtps2pd, sse2, 1 |
| 1520 |
AVX_INSTR cvtsd2si, sse2, 1 |
| 1521 |
AVX_INSTR cvtsd2ss, sse2, 1, 0, 0 |
| 1522 |
AVX_INSTR cvtsi2sd, sse2, 1, 0, 0 |
| 1523 |
AVX_INSTR cvtsi2ss, sse, 1, 0, 0 |
| 1524 |
AVX_INSTR cvtss2sd, sse2, 1, 0, 0 |
| 1525 |
AVX_INSTR cvtss2si, sse, 1 |
| 1526 |
AVX_INSTR cvttpd2dq, sse2, 1 |
| 1527 |
AVX_INSTR cvttps2dq, sse2, 1 |
| 1528 |
AVX_INSTR cvttsd2si, sse2, 1 |
| 1529 |
AVX_INSTR cvttss2si, sse, 1 |
| 1530 |
AVX_INSTR divpd, sse2, 1, 0, 0 |
| 1531 |
AVX_INSTR divps, sse, 1, 0, 0 |
| 1532 |
AVX_INSTR divsd, sse2, 1, 0, 0 |
| 1533 |
AVX_INSTR divss, sse, 1, 0, 0 |
| 1534 |
AVX_INSTR dppd, sse4, 1, 1, 0 |
| 1535 |
AVX_INSTR dpps, sse4, 1, 1, 0 |
| 1536 |
AVX_INSTR extractps, sse4, 1 |
| 1537 |
AVX_INSTR gf2p8affineinvqb, gfni, 0, 1, 0 |
| 1538 |
AVX_INSTR gf2p8affineqb, gfni, 0, 1, 0 |
| 1539 |
AVX_INSTR gf2p8mulb, gfni, 0, 0, 0 |
| 1540 |
AVX_INSTR haddpd, sse3, 1, 0, 0 |
| 1541 |
AVX_INSTR haddps, sse3, 1, 0, 0 |
| 1542 |
AVX_INSTR hsubpd, sse3, 1, 0, 0 |
| 1543 |
AVX_INSTR hsubps, sse3, 1, 0, 0 |
| 1544 |
AVX_INSTR insertps, sse4, 1, 1, 0 |
| 1545 |
AVX_INSTR lddqu, sse3 |
| 1546 |
AVX_INSTR ldmxcsr, sse, 1 |
| 1547 |
AVX_INSTR maskmovdqu, sse2 |
| 1548 |
AVX_INSTR maxpd, sse2, 1, 0, 1 |
| 1549 |
AVX_INSTR maxps, sse, 1, 0, 1 |
| 1550 |
AVX_INSTR maxsd, sse2, 1, 0, 0 |
| 1551 |
AVX_INSTR maxss, sse, 1, 0, 0 |
| 1552 |
AVX_INSTR minpd, sse2, 1, 0, 1 |
| 1553 |
AVX_INSTR minps, sse, 1, 0, 1 |
| 1554 |
AVX_INSTR minsd, sse2, 1, 0, 0 |
| 1555 |
AVX_INSTR minss, sse, 1, 0, 0 |
| 1556 |
AVX_INSTR movapd, sse2, 1 |
| 1557 |
AVX_INSTR movaps, sse, 1 |
| 1558 |
AVX_INSTR movd, mmx |
| 1559 |
AVX_INSTR movddup, sse3, 1 |
| 1560 |
AVX_INSTR movdqa, sse2 |
| 1561 |
AVX_INSTR movdqu, sse2 |
| 1562 |
AVX_INSTR movhlps, sse, 1, 0, 0 |
| 1563 |
AVX_INSTR movhpd, sse2, 1, 0, 0 |
| 1564 |
AVX_INSTR movhps, sse, 1, 0, 0 |
| 1565 |
AVX_INSTR movlhps, sse, 1, 0, 0 |
| 1566 |
AVX_INSTR movlpd, sse2, 1, 0, 0 |
| 1567 |
AVX_INSTR movlps, sse, 1, 0, 0 |
| 1568 |
AVX_INSTR movmskpd, sse2, 1 |
| 1569 |
AVX_INSTR movmskps, sse, 1 |
| 1570 |
AVX_INSTR movntdq, sse2 |
| 1571 |
AVX_INSTR movntdqa, sse4 |
| 1572 |
AVX_INSTR movntpd, sse2, 1 |
| 1573 |
AVX_INSTR movntps, sse, 1 |
| 1574 |
AVX_INSTR movq, mmx |
| 1575 |
AVX_INSTR movsd, sse2, 1, 0, 0 |
| 1576 |
AVX_INSTR movshdup, sse3, 1 |
| 1577 |
AVX_INSTR movsldup, sse3, 1 |
| 1578 |
AVX_INSTR movss, sse, 1, 0, 0 |
| 1579 |
AVX_INSTR movupd, sse2, 1 |
| 1580 |
AVX_INSTR movups, sse, 1 |
| 1581 |
AVX_INSTR mpsadbw, sse4, 0, 1, 0 |
| 1582 |
AVX_INSTR mulpd, sse2, 1, 0, 1 |
| 1583 |
AVX_INSTR mulps, sse, 1, 0, 1 |
| 1584 |
AVX_INSTR mulsd, sse2, 1, 0, 0 |
| 1585 |
AVX_INSTR mulss, sse, 1, 0, 0 |
| 1586 |
AVX_INSTR orpd, sse2, 1, 0, 1 |
| 1587 |
AVX_INSTR orps, sse, 1, 0, 1 |
| 1588 |
AVX_INSTR pabsb, ssse3 |
| 1589 |
AVX_INSTR pabsd, ssse3 |
| 1590 |
AVX_INSTR pabsw, ssse3 |
| 1591 |
AVX_INSTR packssdw, mmx, 0, 0, 0 |
| 1592 |
AVX_INSTR packsswb, mmx, 0, 0, 0 |
| 1593 |
AVX_INSTR packusdw, sse4, 0, 0, 0 |
| 1594 |
AVX_INSTR packuswb, mmx, 0, 0, 0 |
| 1595 |
AVX_INSTR paddb, mmx, 0, 0, 1 |
| 1596 |
AVX_INSTR paddd, mmx, 0, 0, 1 |
| 1597 |
AVX_INSTR paddq, sse2, 0, 0, 1 |
| 1598 |
AVX_INSTR paddsb, mmx, 0, 0, 1 |
| 1599 |
AVX_INSTR paddsw, mmx, 0, 0, 1 |
| 1600 |
AVX_INSTR paddusb, mmx, 0, 0, 1 |
| 1601 |
AVX_INSTR paddusw, mmx, 0, 0, 1 |
| 1602 |
AVX_INSTR paddw, mmx, 0, 0, 1 |
| 1603 |
AVX_INSTR palignr, ssse3, 0, 1, 0 |
| 1604 |
AVX_INSTR pand, mmx, 0, 0, 1 |
| 1605 |
AVX_INSTR pandn, mmx, 0, 0, 0 |
| 1606 |
AVX_INSTR pavgb, mmx2, 0, 0, 1 |
| 1607 |
AVX_INSTR pavgw, mmx2, 0, 0, 1 |
| 1608 |
AVX_INSTR pblendvb, sse4, 0, 1, 0 ; last operand must be xmm0 with legacy encoding |
| 1609 |
AVX_INSTR pblendw, sse4, 0, 1, 0 |
| 1610 |
AVX_INSTR pclmulhqhqdq, fnord, 0, 0, 0 |
| 1611 |
AVX_INSTR pclmulhqlqdq, fnord, 0, 0, 0 |
| 1612 |
AVX_INSTR pclmullqhqdq, fnord, 0, 0, 0 |
| 1613 |
AVX_INSTR pclmullqlqdq, fnord, 0, 0, 0 |
| 1614 |
AVX_INSTR pclmulqdq, fnord, 0, 1, 0 |
| 1615 |
AVX_INSTR pcmpeqb, mmx, 0, 0, 1 |
| 1616 |
AVX_INSTR pcmpeqd, mmx, 0, 0, 1 |
| 1617 |
AVX_INSTR pcmpeqq, sse4, 0, 0, 1 |
| 1618 |
AVX_INSTR pcmpeqw, mmx, 0, 0, 1 |
| 1619 |
AVX_INSTR pcmpestri, sse42 |
| 1620 |
AVX_INSTR pcmpestrm, sse42 |
| 1621 |
AVX_INSTR pcmpgtb, mmx, 0, 0, 0 |
| 1622 |
AVX_INSTR pcmpgtd, mmx, 0, 0, 0 |
| 1623 |
AVX_INSTR pcmpgtq, sse42, 0, 0, 0 |
| 1624 |
AVX_INSTR pcmpgtw, mmx, 0, 0, 0 |
| 1625 |
AVX_INSTR pcmpistri, sse42 |
| 1626 |
AVX_INSTR pcmpistrm, sse42 |
| 1627 |
AVX_INSTR pextrb, sse4 |
| 1628 |
AVX_INSTR pextrd, sse4 |
| 1629 |
AVX_INSTR pextrq, sse4 |
| 1630 |
AVX_INSTR pextrw, mmx2 |
| 1631 |
AVX_INSTR phaddd, ssse3, 0, 0, 0 |
| 1632 |
AVX_INSTR phaddsw, ssse3, 0, 0, 0 |
| 1633 |
AVX_INSTR phaddw, ssse3, 0, 0, 0 |
| 1634 |
AVX_INSTR phminposuw, sse4 |
| 1635 |
AVX_INSTR phsubd, ssse3, 0, 0, 0 |
| 1636 |
AVX_INSTR phsubsw, ssse3, 0, 0, 0 |
| 1637 |
AVX_INSTR phsubw, ssse3, 0, 0, 0 |
| 1638 |
AVX_INSTR pinsrb, sse4, 0, 1, 0 |
| 1639 |
AVX_INSTR pinsrd, sse4, 0, 1, 0 |
| 1640 |
AVX_INSTR pinsrq, sse4, 0, 1, 0 |
| 1641 |
AVX_INSTR pinsrw, mmx2, 0, 1, 0 |
| 1642 |
AVX_INSTR pmaddubsw, ssse3, 0, 0, 0 |
| 1643 |
AVX_INSTR pmaddwd, mmx, 0, 0, 1 |
| 1644 |
AVX_INSTR pmaxsb, sse4, 0, 0, 1 |
| 1645 |
AVX_INSTR pmaxsd, sse4, 0, 0, 1 |
| 1646 |
AVX_INSTR pmaxsw, mmx2, 0, 0, 1 |
| 1647 |
AVX_INSTR pmaxub, mmx2, 0, 0, 1 |
| 1648 |
AVX_INSTR pmaxud, sse4, 0, 0, 1 |
| 1649 |
AVX_INSTR pmaxuw, sse4, 0, 0, 1 |
| 1650 |
AVX_INSTR pminsb, sse4, 0, 0, 1 |
| 1651 |
AVX_INSTR pminsd, sse4, 0, 0, 1 |
| 1652 |
AVX_INSTR pminsw, mmx2, 0, 0, 1 |
| 1653 |
AVX_INSTR pminub, mmx2, 0, 0, 1 |
| 1654 |
AVX_INSTR pminud, sse4, 0, 0, 1 |
| 1655 |
AVX_INSTR pminuw, sse4, 0, 0, 1 |
| 1656 |
AVX_INSTR pmovmskb, mmx2 |
| 1657 |
AVX_INSTR pmovsxbd, sse4 |
| 1658 |
AVX_INSTR pmovsxbq, sse4 |
| 1659 |
AVX_INSTR pmovsxbw, sse4 |
| 1660 |
AVX_INSTR pmovsxdq, sse4 |
| 1661 |
AVX_INSTR pmovsxwd, sse4 |
| 1662 |
AVX_INSTR pmovsxwq, sse4 |
| 1663 |
AVX_INSTR pmovzxbd, sse4 |
| 1664 |
AVX_INSTR pmovzxbq, sse4 |
| 1665 |
AVX_INSTR pmovzxbw, sse4 |
| 1666 |
AVX_INSTR pmovzxdq, sse4 |
| 1667 |
AVX_INSTR pmovzxwd, sse4 |
| 1668 |
AVX_INSTR pmovzxwq, sse4 |
| 1669 |
AVX_INSTR pmuldq, sse4, 0, 0, 1 |
| 1670 |
AVX_INSTR pmulhrsw, ssse3, 0, 0, 1 |
| 1671 |
AVX_INSTR pmulhuw, mmx2, 0, 0, 1 |
| 1672 |
AVX_INSTR pmulhw, mmx, 0, 0, 1 |
| 1673 |
AVX_INSTR pmulld, sse4, 0, 0, 1 |
| 1674 |
AVX_INSTR pmullw, mmx, 0, 0, 1 |
| 1675 |
AVX_INSTR pmuludq, sse2, 0, 0, 1 |
| 1676 |
AVX_INSTR por, mmx, 0, 0, 1 |
| 1677 |
AVX_INSTR psadbw, mmx2, 0, 0, 1 |
| 1678 |
AVX_INSTR pshufb, ssse3, 0, 0, 0 |
| 1679 |
AVX_INSTR pshufd, sse2 |
| 1680 |
AVX_INSTR pshufhw, sse2 |
| 1681 |
AVX_INSTR pshuflw, sse2 |
| 1682 |
AVX_INSTR psignb, ssse3, 0, 0, 0 |
| 1683 |
AVX_INSTR psignd, ssse3, 0, 0, 0 |
| 1684 |
AVX_INSTR psignw, ssse3, 0, 0, 0 |
| 1685 |
AVX_INSTR pslld, mmx, 0, 0, 0 |
| 1686 |
AVX_INSTR pslldq, sse2, 0, 0, 0 |
| 1687 |
AVX_INSTR psllq, mmx, 0, 0, 0 |
| 1688 |
AVX_INSTR psllw, mmx, 0, 0, 0 |
| 1689 |
AVX_INSTR psrad, mmx, 0, 0, 0 |
| 1690 |
AVX_INSTR psraw, mmx, 0, 0, 0 |
| 1691 |
AVX_INSTR psrld, mmx, 0, 0, 0 |
| 1692 |
AVX_INSTR psrldq, sse2, 0, 0, 0 |
| 1693 |
AVX_INSTR psrlq, mmx, 0, 0, 0 |
| 1694 |
AVX_INSTR psrlw, mmx, 0, 0, 0 |
| 1695 |
AVX_INSTR psubb, mmx, 0, 0, 0 |
| 1696 |
AVX_INSTR psubd, mmx, 0, 0, 0 |
| 1697 |
AVX_INSTR psubq, sse2, 0, 0, 0 |
| 1698 |
AVX_INSTR psubsb, mmx, 0, 0, 0 |
| 1699 |
AVX_INSTR psubsw, mmx, 0, 0, 0 |
| 1700 |
AVX_INSTR psubusb, mmx, 0, 0, 0 |
| 1701 |
AVX_INSTR psubusw, mmx, 0, 0, 0 |
| 1702 |
AVX_INSTR psubw, mmx, 0, 0, 0 |
| 1703 |
AVX_INSTR ptest, sse4 |
| 1704 |
AVX_INSTR punpckhbw, mmx, 0, 0, 0 |
| 1705 |
AVX_INSTR punpckhdq, mmx, 0, 0, 0 |
| 1706 |
AVX_INSTR punpckhqdq, sse2, 0, 0, 0 |
| 1707 |
AVX_INSTR punpckhwd, mmx, 0, 0, 0 |
| 1708 |
AVX_INSTR punpcklbw, mmx, 0, 0, 0 |
| 1709 |
AVX_INSTR punpckldq, mmx, 0, 0, 0 |
| 1710 |
AVX_INSTR punpcklqdq, sse2, 0, 0, 0 |
| 1711 |
AVX_INSTR punpcklwd, mmx, 0, 0, 0 |
| 1712 |
AVX_INSTR pxor, mmx, 0, 0, 1 |
| 1713 |
AVX_INSTR rcpps, sse, 1 |
| 1714 |
AVX_INSTR rcpss, sse, 1, 0, 0 |
| 1715 |
AVX_INSTR roundpd, sse4, 1 |
| 1716 |
AVX_INSTR roundps, sse4, 1 |
| 1717 |
AVX_INSTR roundsd, sse4, 1, 1, 0 |
| 1718 |
AVX_INSTR roundss, sse4, 1, 1, 0 |
| 1719 |
AVX_INSTR rsqrtps, sse, 1 |
| 1720 |
AVX_INSTR rsqrtss, sse, 1, 0, 0 |
| 1721 |
AVX_INSTR shufpd, sse2, 1, 1, 0 |
| 1722 |
AVX_INSTR shufps, sse, 1, 1, 0 |
| 1723 |
AVX_INSTR sqrtpd, sse2, 1 |
| 1724 |
AVX_INSTR sqrtps, sse, 1 |
| 1725 |
AVX_INSTR sqrtsd, sse2, 1, 0, 0 |
| 1726 |
AVX_INSTR sqrtss, sse, 1, 0, 0 |
| 1727 |
AVX_INSTR stmxcsr, sse, 1 |
| 1728 |
AVX_INSTR subpd, sse2, 1, 0, 0 |
| 1729 |
AVX_INSTR subps, sse, 1, 0, 0 |
| 1730 |
AVX_INSTR subsd, sse2, 1, 0, 0 |
| 1731 |
AVX_INSTR subss, sse, 1, 0, 0 |
| 1732 |
AVX_INSTR ucomisd, sse2, 1 |
| 1733 |
AVX_INSTR ucomiss, sse, 1 |
| 1734 |
AVX_INSTR unpckhpd, sse2, 1, 0, 0 |
| 1735 |
AVX_INSTR unpckhps, sse, 1, 0, 0 |
| 1736 |
AVX_INSTR unpcklpd, sse2, 1, 0, 0 |
| 1737 |
AVX_INSTR unpcklps, sse, 1, 0, 0 |
| 1738 |
AVX_INSTR xorpd, sse2, 1, 0, 1 |
| 1739 |
AVX_INSTR xorps, sse, 1, 0, 1 |
| 1740 |
|
| 1741 |
; 3DNow instructions, for sharing code between AVX, SSE and 3DN |
| 1742 |
AVX_INSTR pfadd, 3dnow, 1, 0, 1 |
| 1743 |
AVX_INSTR pfmul, 3dnow, 1, 0, 1 |
| 1744 |
AVX_INSTR pfsub, 3dnow, 1, 0, 0 |
| 1745 |
|
| 1746 |
;%1 == instruction |
| 1747 |
;%2 == minimal instruction set |
| 1748 |
%macro GPR_INSTR 2 |
| 1749 |
%macro %1 2-5 fnord, %1, %2 |
| 1750 |
%ifdef cpuname |
| 1751 |
%if notcpuflag(%5) |
| 1752 |
%error use of ``%4'' %5 instruction in cpuname function: current_function |
| 1753 |
%endif |
| 1754 |
%endif |
| 1755 |
%ifidn %3, fnord |
| 1756 |
%4 %1, %2 |
| 1757 |
%else |
| 1758 |
%4 %1, %2, %3 |
| 1759 |
%endif |
| 1760 |
%endmacro |
| 1761 |
%endmacro |
| 1762 |
|
| 1763 |
GPR_INSTR andn, bmi1 |
| 1764 |
GPR_INSTR bextr, bmi1 |
| 1765 |
GPR_INSTR blsi, bmi1 |
| 1766 |
GPR_INSTR blsmsk, bmi1 |
| 1767 |
GPR_INSTR blsr, bmi1 |
| 1768 |
GPR_INSTR bzhi, bmi2 |
| 1769 |
GPR_INSTR mulx, bmi2 |
| 1770 |
GPR_INSTR pdep, bmi2 |
| 1771 |
GPR_INSTR pext, bmi2 |
| 1772 |
GPR_INSTR popcnt, sse42 |
| 1773 |
GPR_INSTR rorx, bmi2 |
| 1774 |
GPR_INSTR sarx, bmi2 |
| 1775 |
GPR_INSTR shlx, bmi2 |
| 1776 |
GPR_INSTR shrx, bmi2 |
| 1777 |
|
| 1778 |
; base-4 constants for shuffles |
| 1779 |
%assign i 0 |
| 1780 |
%rep 256 |
| 1781 |
%assign j ((i>>6)&3)*1000 + ((i>>4)&3)*100 + ((i>>2)&3)*10 + (i&3) |
| 1782 |
%if j < 10 |
| 1783 |
CAT_XDEFINE q000, j, i |
| 1784 |
%elif j < 100 |
| 1785 |
CAT_XDEFINE q00, j, i |
| 1786 |
%elif j < 1000 |
| 1787 |
CAT_XDEFINE q0, j, i |
| 1788 |
%else |
| 1789 |
CAT_XDEFINE q, j, i |
| 1790 |
%endif |
| 1791 |
%assign i i+1 |
| 1792 |
%endrep |
| 1793 |
%undef i |
| 1794 |
%undef j |
| 1795 |
|
| 1796 |
%macro FMA_INSTR 3 |
| 1797 |
%macro %1 4-7 %1, %2, %3 |
| 1798 |
%if cpuflag(xop) |
| 1799 |
v%5 %1, %2, %3, %4 |
| 1800 |
%elifnidn %1, %4 |
| 1801 |
%6 %1, %2, %3 |
| 1802 |
%7 %1, %4 |
| 1803 |
%else |
| 1804 |
%error non-xop emulation of ``%5 %1, %2, %3, %4'' is not supported |
| 1805 |
%endif |
| 1806 |
%endmacro |
| 1807 |
%endmacro |
| 1808 |
|
| 1809 |
FMA_INSTR pmacsdd, pmulld, paddd ; sse4 emulation |
| 1810 |
FMA_INSTR pmacsdql, pmuldq, paddq ; sse4 emulation |
| 1811 |
FMA_INSTR pmacsww, pmullw, paddw |
| 1812 |
FMA_INSTR pmadcswd, pmaddwd, paddd |
| 1813 |
|
| 1814 |
; Macros for consolidating FMA3 and FMA4 using 4-operand (dst, src1, src2, src3) syntax. |
| 1815 |
; FMA3 is only possible if dst is the same as one of the src registers. |
| 1816 |
; Either src2 or src3 can be a memory operand. |
| 1817 |
%macro FMA4_INSTR 2-* |
| 1818 |
%push fma4_instr |
| 1819 |
%xdefine %$prefix %1 |
| 1820 |
%rep %0 - 1 |
| 1821 |
%macro %$prefix%2 4-6 %$prefix, %2 |
| 1822 |
%if notcpuflag(fma3) && notcpuflag(fma4) |
| 1823 |
%error use of ``%5%6'' fma instruction in cpuname function: current_function |
| 1824 |
%elif cpuflag(fma4) |
| 1825 |
v%5%6 %1, %2, %3, %4 |
| 1826 |
%elifidn %1, %2 |
| 1827 |
; If %3 or %4 is a memory operand it needs to be encoded as the last operand. |
| 1828 |
%ifnum sizeof%3 |
| 1829 |
v%{5}213%6 %2, %3, %4 |
| 1830 |
%else |
| 1831 |
v%{5}132%6 %2, %4, %3 |
| 1832 |
%endif |
| 1833 |
%elifidn %1, %3 |
| 1834 |
v%{5}213%6 %3, %2, %4 |
| 1835 |
%elifidn %1, %4 |
| 1836 |
v%{5}231%6 %4, %2, %3 |
| 1837 |
%else |
| 1838 |
%error fma3 emulation of ``%5%6 %1, %2, %3, %4'' is not supported |
| 1839 |
%endif |
| 1840 |
%endmacro |
| 1841 |
%rotate 1 |
| 1842 |
%endrep |
| 1843 |
%pop |
| 1844 |
%endmacro |
| 1845 |
|
| 1846 |
FMA4_INSTR fmadd, pd, ps, sd, ss |
| 1847 |
FMA4_INSTR fmaddsub, pd, ps |
| 1848 |
FMA4_INSTR fmsub, pd, ps, sd, ss |
| 1849 |
FMA4_INSTR fmsubadd, pd, ps |
| 1850 |
FMA4_INSTR fnmadd, pd, ps, sd, ss |
| 1851 |
FMA4_INSTR fnmsub, pd, ps, sd, ss |
| 1852 |
|
| 1853 |
; Macros for converting VEX instructions to equivalent EVEX ones. |
| 1854 |
%macro EVEX_INSTR 2-3 0 ; vex, evex, prefer_evex |
| 1855 |
%macro %1 2-7 fnord, fnord, %1, %2, %3 |
| 1856 |
%ifidn %3, fnord |
| 1857 |
%define %%args %1, %2 |
| 1858 |
%elifidn %4, fnord |
| 1859 |
%define %%args %1, %2, %3 |
| 1860 |
%else |
| 1861 |
%define %%args %1, %2, %3, %4 |
| 1862 |
%endif |
| 1863 |
%assign %%evex_required cpuflag(avx512) & %7 |
| 1864 |
%ifnum regnumof%1 |
| 1865 |
%if regnumof%1 >= 16 || sizeof%1 > 32 |
| 1866 |
%assign %%evex_required 1 |
| 1867 |
%endif |
| 1868 |
%endif |
| 1869 |
%ifnum regnumof%2 |
| 1870 |
%if regnumof%2 >= 16 || sizeof%2 > 32 |
| 1871 |
%assign %%evex_required 1 |
| 1872 |
%endif |
| 1873 |
%endif |
| 1874 |
%ifnum regnumof%3 |
| 1875 |
%if regnumof%3 >= 16 || sizeof%3 > 32 |
| 1876 |
%assign %%evex_required 1 |
| 1877 |
%endif |
| 1878 |
%endif |
| 1879 |
%if %%evex_required |
| 1880 |
%6 %%args |
| 1881 |
%else |
| 1882 |
%5 %%args ; Prefer VEX over EVEX due to shorter instruction length |
| 1883 |
%endif |
| 1884 |
%endmacro |
| 1885 |
%endmacro |
| 1886 |
|
| 1887 |
EVEX_INSTR vbroadcastf128, vbroadcastf32x4 |
| 1888 |
EVEX_INSTR vbroadcasti128, vbroadcasti32x4 |
| 1889 |
EVEX_INSTR vextractf128, vextractf32x4 |
| 1890 |
EVEX_INSTR vextracti128, vextracti32x4 |
| 1891 |
EVEX_INSTR vinsertf128, vinsertf32x4 |
| 1892 |
EVEX_INSTR vinserti128, vinserti32x4 |
| 1893 |
EVEX_INSTR vmovdqa, vmovdqa32 |
| 1894 |
EVEX_INSTR vmovdqu, vmovdqu32 |
| 1895 |
EVEX_INSTR vpand, vpandd |
| 1896 |
EVEX_INSTR vpandn, vpandnd |
| 1897 |
EVEX_INSTR vpor, vpord |
| 1898 |
EVEX_INSTR vpxor, vpxord |
| 1899 |
EVEX_INSTR vrcpps, vrcp14ps, 1 ; EVEX versions have higher precision |
| 1900 |
EVEX_INSTR vrcpss, vrcp14ss, 1 |
| 1901 |
EVEX_INSTR vrsqrtps, vrsqrt14ps, 1 |
| 1902 |
EVEX_INSTR vrsqrtss, vrsqrt14ss, 1 |