Debian Codegraph @

TODO

raw
1 1. bug in resample code: downsampling from 44101 to 44100 causes
2 a seg fault. Workaround in place for now: resampling disabled
3 if input/output samplerates agree to 4 digits.
4
5
6 2. high bitrate encodings have trouble on some hardware players.
7 Track this down. Probably caused by --strictly-enforce-ISO and
8 IXMAX_VAL. Try setting IXMAX_VAL back to 8191 and/or
9 maxmp3buf=8*960 to see if there is a working combination.
10
11 note: one of the decoder bugs was identified. It is caused by using
12 different block sizes on both channels. A parameter need to be
13 added to Lame to handle workarounds.
14
15
16 3 frontend: code is a complete mess. But it has so many debugged
17 features it will be a lot of work to re-write.
18
19
20 4. MSVC project files. It would be nice to create a working
21 MSVC6 workspace, which included all the projects as possible
22 targets:
23 lame.exe
24 mp3x.exe (require GTK libs)
25 lame_enc.dll
26 ACM codec
27 directshow codec
28
29 I think the only MSVC5 project that we need to preserve is
30 for lame_enc.dll, since Albert Faber (still?) doesn't use VC6?
31 But no reason we cant have VC5 and VC6 project files for the dll.
32
33
34 5. NOGAP encoding:
35
36 -nogap: more testing, fix options, test id3 tags?
37 Can we change id3 tags without reseting the encoder??
38 At the end of encoding 1.wav, call lame_get_mf_samples_to_encode()
39 to find the number of non encoded buffered PCM samples. Then
40 encode samples from 2.wav until these PCM samples have been
41 encoded, *THEN* call lame_encode_flush_nogap() and close
42 out file 1.mp3.
43
44
45 NOGAP decoding:
46 lame --decode --nogap file1.mp3 file2.mp3 file3.mp3
47 should also work. What needs to be done:
48 get_audio.c: We need a way to open a second mp3 file, without
49 calling lame_decode_init() and reinitializing mpglib.
50 And the mpglib needs to know to look for new Xing
51 tags at the beginning of file2.mp3 and file3.mp3.
52
53
54 6. Does stdin work when LAME is compiled to use libsndfile?
55 (new version of libsndfile will support this - try this out)
56
57
58 7. LAME has problems with pure DC input. i.e. a square wave with
59 a frequency well below 20 Hz. Not very important, but it should
60 be fixed.
61
62
63 8. mgplib has bugs with i-stereo. flag denoting invalid
64 i-stereo value (= frame is m/s stereo) is not correct.
65
66
67 9. lowpass filter: for M/S stereo, use more filtering for the side
68 channel, less filtering for mid channel. We need to first replace
69 the polyphase filter with an FIR lowpass filter with finer frequency
70 resolution before implementing this.
71
72
73 10. LAME has a 31 point FIR filter used for resampling, which
74 can also be used as a lowpass. When resampling is done,
75 use that filter to also lowpass instead of the polyphase filter.
76
77
78 11. Even when resampling is not needed, should we use an FIR filter
79 for the lowpass? If it is not too much slower, yes. If it
80 is slower, then it should be an option since it will produce
81 higher quality.
82
83
84 12. We should consider moving the experts options from the *long
85 help* text into an *experts only* help text. The average Joe gets
86 knocked down by the huge number of possibilities to setup lame.
87
88
89
90 50. Better tonality estimation.
91 Gpsycho uses predictability, and so needs a delay to detect the tonality
92 of a sound.
93 Nspsytune seems to miss tonals when several of them are too narrow.
94 We would probably need the best of both.
95
96
97
98 60. Different ATH handling for sfb21. We are using the minimum value of ath
99 in each whole sfb. in sfb21 this leads to very high bitrates.
100 We could perhaps use 2 or 3 ath partitions in sfb21
101
102 note: partially done
103
104
105
106 70. Use mixed blocks.
107
108
109
110 90. Use intensity stereo. This is a must-have for low bitrates, but if the
111 algorythm is very good it could also be used in every case.
112 Note: mpg123 (and all derivatives, like xmms and lame/mpglib)
113 have bugs in the intensity stereo decoding. Bugs have been there
114 for years since there are very few intensity stereo mp3's out there.
115
116
117
118 95. Merge GOGO's fast assembler routines.
119
120
121
122 96. It would be nice to save some information whilst encoding
123 a: wave -> mp3
124 a RIFF/wave can contain LIST chunks with information
125 about author, title, etc.
126 ==> could go into TAG fields of resulting mp3
127 b: mp3 -> mp3
128 ==> we could copy the TAG directly
129 c: mp3 -> wave
130 ==> copy TAG into LIST chunk
131
132
133
134 97. Integrate plusV extensions
135
136
137
138 99. To be able to encode as fast as FastEnc