Debian Codegraph @

pinentry-kwallet

raw
1 #!/usr/bin/env mksh
2 rcsid='$MirOS: contrib/hosted/tg/code/kwalletcli/pinentry-kwallet,v 1.16 2016/08/30 17:37:59 tg Exp $'
3 #-
4 # Copyright © 2009, 2010, 2011
5 # mirabilos <[email protected]>
6 #
7 # Provided that these terms and disclaimer and all copyright notices
8 # are retained or reproduced in an accompanying document, permission
9 # is granted to deal in this work without restriction, including un‐
10 # limited rights to use, publicly perform, distribute, sell, modify,
11 # merge, give away, or sublicence.
12 #
13 # This work is provided “AS IS” and WITHOUT WARRANTY of any kind, to
14 # the utmost extent permitted by applicable law, neither express nor
15 # implied; without malicious intent or gross negligence. In no event
16 # may a licensor, author or contributor be held liable for indirect,
17 # direct, other damage, loss, or other issues arising in any way out
18 # of dealing in the work, even if advised of the possibility of such
19 # damage or existence of a defect, except proven that it results out
20 # of said person’s immediate fault when using the work as intended.
21
22 unset LC_ALL LANGUAGE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES \
23 LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT LC_IDENTIFICATION
24 export LANG=C LC_CTYPE=en_US.UTF-8
25 set -U
26
27 iodebug=0
28 iodp=~/pinentry-kwallet.debug
29 if (( iodebug )); then
30 print "\n$$ === new $(date)" >>"$iodp"
31 chmod 0600 "$iodp"
32 fi
33 function io_p_in {
34 local io_line
35 IFS= read -r io_line || return $?
36 (( iodebug )) && print -r -- "$$ <p $io_line" >>"$iodp"
37 eval $1='${io_line% }'
38 return 0
39 }
40 function io_s_in {
41 local io_line
42 IFS= read -pr io_line || return $?
43 (( iodebug )) && print -r -- "$$ <s $io_line" >>"$iodp"
44 eval $1=\$io_line
45 return 0
46 }
47 function io_p_out {
48 (( iodebug )) && print -r -- "$$ >p $(print "$@")" >>"$iodp"
49 print "$@"
50 }
51 function io_s_out {
52 (( iodebug )) && print -r -- "$$ >s $(print "$@")" >>"$iodp"
53 print -p "$@"
54 }
55 function log {
56 (( iodebug )) && print -r -- "$$ LOG $*" >>"$iodp"
57 }
58
59 if [[ -n $PINENTRY_KWALLET ]]; then
60 io_p_out ERR 7 trying to call me recursively
61 while io_p_in line; do
62 io_p_out ERR 7 trying to call me recursively
63 done
64 exit 1
65 fi
66
67 quiet=0
68 set -A args
69 last=
70 i=0
71 for arg in "$@"; do
72 log "argv[$((++i))]='${arg//\'/\'\\\'\'}'"
73 if [[ $last = --display ]]; then
74 v=DISPLAY
75 last=specvar
76 elif [[ $last = --ttyname ]]; then
77 v=GPG_TTY
78 last=specvar
79 elif [[ $last = --ttytype ]]; then
80 v=GPG_TERM
81 last=specvar
82 elif [[ $last = --lc-type ]]; then
83 v=LC_CTYPE
84 last=specvar
85 elif [[ $last = --lc-messages ]]; then
86 v=LC_MESSAGES
87 last=specvar
88 fi
89 if [[ $last = specvar ]]; then
90 eval $v=\$arg
91 eval export $v
92 last=addone
93 fi
94 if [[ $last = addone ]]; then
95 args[${#args[*]}]=$arg
96 last=
97 continue
98 fi
99 last=
100 if [[ $arg = -V ]]; then
101 (( quiet )) || print -ru2 -- "$rcsid"
102 exit 0
103 elif [[ $arg = --version ]]; then
104 print -r -- "$rcsid"
105 exit 0
106 elif [[ $arg = @(-h|--help) ]]; then
107 print "Usage: pinentry-kwallet [options]"
108 exit 0
109 elif [[ $arg = -q ]]; then
110 quiet=1
111 elif [[ $arg = \
112 @(-@(d|e|g)|--@(debug|enhanced|no-global-grab)) ]]; then
113 args[${#args[*]}]=$arg
114 elif [[ $arg = \
115 --@(display|ttyname|ttytype|lc-type|lc-messages) ]]; then
116 args[${#args[*]}]=$arg
117 last=$arg
118 elif [[ $arg = --parent-wid ]]; then
119 args[${#args[*]}]=$arg
120 last=addone
121 else
122 (( quiet )) || print -u2 "warning: unknown argument '$arg'"
123 args[${#args[*]}]=$arg
124 fi
125 done
126
127 if [[ -z $DISPLAY ]]; then
128 log "since DISPLAY is not set, replacing with: ${PINENTRY:-pinentry}"
129 PINENTRY_KWALLET=set exec "${PINENTRY:-pinentry}" "${args[@]}"
130 fi
131
132 PINENTRY_KWALLET=set "${PINENTRY:-pinentry}" "${args[@]}" |&
133 copid=$?
134 log "starting coproc $copid: PINENTRY_KWALLET=set '${PINENTRY:-pinentry}' args"
135 io_s_in resp || resp='ERR 14 no coprocess'
136 if [[ $resp = OK@(| *) ]]; then
137 have_sub=1
138 trap "kill $copid; exit 255" 1 2 3 5 13 15
139 else
140 have_sub=0
141 exec 3>&p; exec 3>&-
142 fi
143 log have_sub=$have_sub
144 io_p_out OK ready to listen to your demands
145
146 x_dsctxt=
147 x_prompt=
148 x_errtxt=
149
150 function getit {
151 local type=$1 key=〈${x_prompt}〉$x_dsctxt pw rv tw=0 d errcnt blst=0
152
153 copyline=0
154 # the errcnt handling is a little tricky, because GnuPG v2 does
155 # not reuse the pinentry session (suckers, unable to... *rant*)
156 if pw=$(kwalletcli -q -f pinentry-kwallet -e "$type-B-$key") && \
157 [[ $pw = yes* ]]; then
158 log "blacklisted"
159 blst=1
160 elif pw=$(kwalletcli -q -f pinentry-kwallet -e "$type-e-$key"); then
161 log "read errcnt: '$pw'"
162 set -A errcnt -- $pw
163 d=$(date -u +'%s')
164 (( errcnt[0] < (d - 15) )) && errcnt[1]=0
165 else
166 log "read errcnt failed"
167 fi
168 (( blst )) || [[ -z $x_errtxt ]] || (( errcnt[1]++ ))
169 (( blst )) || if (( errcnt[1] )); then
170 errcnt[0]=${d:-$(date -u +'%s')}
171 kwalletcli -q -f pinentry-kwallet -e "$type-e-$key" \
172 -p "${errcnt[*]}"
173 log "write errcnt: '${errcnt[*]}' -> $?"
174 fi
175 (( blst )) || if (( errcnt[1] < 2 )); then
176 pw=$(kwalletcli -q -f pinentry-kwallet -e "$type-v-$key")
177 rv=$?
178 log "read pass $rv: '$pw'"
179 case $type:$rv {
180 (bool:0)
181 if [[ $pw = \
182 @(1|-1|[Tt][Rr][Uu][Ee]|[Yy][Ee][Ss]) ]]; then
183 io_p_out OK
184 return
185 elif [[ $pw = \
186 @(0|[Ff][Aa][Ll][Ss][Ee]|[Nn][Oo]) ]]; then
187 io_p_out ERR 128 not confirmed
188 return
189 fi
190 ;;
191 (pass:0)
192 [[ -n $pw ]] && io_p_out -r "D $pw"
193 io_p_out OK
194 return
195 ;;
196 }
197 fi
198 if (( !have_sub )); then
199 io_p_out ERR 14 no coprocess
200 return
201 fi
202 if [[ $type = bool ]]; then
203 io_s_out CONFIRM
204 io_s_in resp
205 case $resp {
206 (OK@(| *))
207 pw=1
208 tw=1
209 ;;
210 (ERR\ @(128|83886194|83886179)@(| *))
211 # 128 = not confirmed (hardy)
212 # 83886194 = not confirmed (wheezy)
213 # 83886179 = canceled (wheezy)
214 pw=0
215 tw=1
216 ;;
217 }
218 else
219 io_s_out GETPIN
220 io_s_in resp
221 pw=
222 #XXX normally, read until OK|ERR
223 if [[ $resp = @(D )* ]]; then
224 pw=${resp#D }
225 io_s_in resp
226 fi
227 [[ $resp = OK@(| *) ]] && tw=1
228 fi
229 (( tw && !blst )) && if kwalletcli_getpin -q -b \
230 -t "Do you want to store your response for description
231 '$x_dsctxt',
232 prompt '$x_prompt' in the KDE Wallet?"; then
233 kwalletcli -q -f pinentry-kwallet -e "$type-v-$key" -p "$pw"
234 log "want store: yes, pw '$pw' -> $?"
235 else
236 # create blacklist entry for this answer
237 kwalletcli -q -f pinentry-kwallet -e "$type-B-$key" -p yes
238 log "want store: no"
239 fi
240 [[ $type = pass ]] && [[ -n $pw ]] && io_p_out -r "D $pw"
241 io_p_out -r -- "$resp"
242 }
243
244 while io_p_in line; do
245 [[ -z $line || $line = '#'* ]] && continue
246 copyline=1
247 case $line {
248 (SETDESC)
249 x_dsctxt=
250 ;;
251 (SETDESC\ *)
252 x_dsctxt=${line#SETDESC }
253 ;;
254 (SETPROMPT)
255 x_prompt=
256 ;;
257 (SETPROMPT\ *)
258 x_prompt=${line#SETPROMPT }
259 ;;
260 (SETTITLE@(| *))
261 ;;
262 (SET@(OK|CANCEL|NOTOK)@(| *))
263 ;;
264 (SETERROR)
265 x_errtxt=
266 ;;
267 (SETERROR\ *)
268 x_errtxt=${line#SETERROR }
269 ;;
270 (SETQUALITYBAR*)
271 ;;
272 (GETPIN)
273 getit pass
274 ;;
275 (CONFIRM)
276 getit bool
277 ;;
278 (MESSAGE|CONFIRM\ --one-button)
279 ;;
280 (OPTION\ ttyname=*)
281 GPG_TTY=${line#*=}
282 export GPG_TTY
283 ;;
284 (OPTION\ ttytype=*)
285 GPG_TERM=${line#*=}
286 export GPG_TERM
287 ;;
288 (OPTION\ lc-ctype=*)
289 LC_CTYPE=${line#*=}
290 export LC_CTYPE
291 ;;
292 (OPTION\ lc-messages=*)
293 LC_MESSAGES=${line#*=}
294 export LC_MESSAGES
295 ;;
296 (OPTION\ *)
297 ;;
298 (CONFIRM\ *)
299 (( quiet )) || print -ru2 "warning: unknown CONFIRM" \
300 "option ${line#CONFIRM }"
301 ;;
302 (BYE@(| *))
303 io_p_out OK
304 break
305 ;;
306 (NOP@(| *))
307 # copy quietly, in case of keepalive
308 ;;
309 (GETINFO\ pid)
310 # undocumented, but used by GnuPG v2
311 io_p_out D $$
312 io_p_out OK
313 copyline=0
314 ;;
315 (GETINFO\ version)
316 # undocumented, but used by GnuPG v2
317 # just copy it quietly
318 #XXX maybe return "ERR 103 unknown command"?
319 ;;
320 (GETINFO\ *)
321 # undocumented, but used by GnuPG v2
322 (( quiet )) || print -ru2 "warning: unknown GETINFO" \
323 "capability ${line#GETINFO }"
324 ;;
325 (*)
326 (( quiet )) || print -ru2 "warning: unknown line '$line'"
327 ;;
328 }
329 (( copyline )) && if (( have_sub )); then
330 io_s_out -r -- "$line"
331 resp=
332 while [[ $resp != @(OK|ERR)@(| *) ]]; do
333 io_s_in resp
334 io_p_out -r -- "$resp"
335 done
336 else
337 io_p_out OK
338 fi
339 done
340 if (( have_sub )); then
341 io_s_out BYE
342 io_s_in resp
343 fi
344 exec 2>/dev/null # avoid "no coprocess" warnings
345 exec 3>&p; exec 3>&-
346 exit 0