Debian Codegraph @

purgatory/arch/x86_64/entry64-32.S

raw
1 /*
2 * purgatory: setup code
3 *
4 * Copyright (C) 2003,2004 Eric Biederman ([email protected])
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation (version 2 of the License).
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18 */
19
20 .data
21 .equ MSR_K6_EFER, 0xC0000080
22 .equ EFER_LME, 0x00000100
23 .equ X86_CR4_PAE, 0x00000020
24 .equ CR0_PG, 0x80000000
25
26 .text
27 .balign 16
28 .globl entry32, entry32_regs
29 entry32:
30 .code64
31
32 /* Setup the 4G offset of entry32 lm_exit code segment */
33 movq $0x00CF9A000000ffff, %rax
34
35 leaq entry32(%rip), %rbx /* Low 24 bits */
36 andq $0xffffff, %rbx
37 shlq $16, %rbx
38 orq %rbx, %rax
39
40 leaq entry32(%rip), %rbx /* High 8 bits */
41 movq $0xff000000, %rdx
42 andq %rdx, %rbx
43 shlq $32, %rbx
44 orq %rbx, %rax
45
46 movq %rax, (gdt + 0x20)(%rip)
47
48 /* Setup a gdt that is generally usefully */
49 lgdt gdt(%rip)
50
51 /* Setup the far pointer to the entry point */
52 movl eip(%rip), %eax
53 movl %eax, entry32_addr(%rip)
54
55 /* Switch to 32bit compatiblity mode */
56 ljmp *lm_exit_addr(%rip)
57 lm_exit:
58 .code32
59
60 /* Disable paging */
61 movl %cr0, %eax
62 andl $~CR0_PG, %eax
63 movl %eax, %cr0
64
65 /* Disable long mode */
66 movl $MSR_K6_EFER, %ecx
67 rdmsr
68 andl $~EFER_LME, %eax
69 wrmsr
70
71 /* Disable PAE */
72 xorl %eax, %eax
73 movl %eax, %cr4
74
75 /* load the data segments */
76 movl $0x18, %eax /* data segment */
77 movl %eax, %ds
78 movl %eax, %es
79 movl %eax, %ss
80 movl %eax, %fs
81 movl %eax, %gs
82
83 /* Load the registers */
84 movl %cs:eax - entry32, %eax
85 movl %cs:ecx - entry32, %ecx
86 movl %cs:edx - entry32, %edx
87 movl %cs:esi - entry32, %esi
88 movl %cs:edi - entry32, %edi
89 movl %cs:esp - entry32, %esp
90 movl %cs:ebp - entry32, %ebp
91 movl %cs:ebx - entry32, %ebx
92
93 /* Jump to the loaded image */
94 ljmp *%cs:entry32_addr - entry32
95
96 .section ".data"
97 .balign 16
98 gdt: /* 0x00 unusable segment
99 * 0x08 unused
100 * so use them as the gdt ptr
101 */
102 .word gdt_end - gdt - 1
103 .quad gdt
104 .word 0, 0, 0
105
106 /* Documented linux kernel segments */
107 /* 0x10 4GB flat code segment */
108 .word 0xFFFF, 0x0000, 0x9A00, 0x00CF
109 /* 0x18 4GB flat data segment */
110 .word 0xFFFF, 0x0000, 0x9200, 0x00CF
111
112 /* 0x20 4GB flat code segment base at entry32 */
113 .word 0xFFFF, 0x0000, 0x9A00, 0x0CF
114 /* 0x28 dummy */
115 .word 0x0000, 0x0000, 0x0000, 0x000
116 /* 0x30 dummy */
117 .word 0x0000, 0x0000, 0x0000, 0x000
118 /* 0x38 dummy */
119 .word 0x0000, 0x0000, 0x0000, 0x000
120 /* 0x40 dummy */
121 .word 0x0000, 0x0000, 0x0000, 0x000
122 /* 0x48 dummy */
123 .word 0x0000, 0x0000, 0x0000, 0x000
124 /* 0x50 dummy */
125 .word 0x0000, 0x0000, 0x0000, 0x000
126 /* 0x58 dummy */
127 .word 0x0000, 0x0000, 0x0000, 0x000
128
129 /* Segments used by the 2.5.x kernel */
130 /* 0x60 4GB flat code segment */
131 .word 0xFFFF, 0x0000, 0x9A00, 0x00CF
132 /* 0x68 4GB flat data segment */
133 .word 0xFFFF, 0x0000, 0x9200, 0x00CF
134 gdt_end:
135
136 .section ".rodata"
137 .balign 4
138 lm_exit_addr:
139 .long lm_exit - entry32
140 .long 0x20
141
142 .section ".data"
143 .balign 4
144 entry32_addr:
145 .long 0x00000000
146 .long 0x10
147
148 .section ".rodata"
149 .balign 4
150 entry32_regs:
151 eax: .long 0x00000000
152 ebx: .long 0x00000000
153 ecx: .long 0x00000000
154 edx: .long 0x00000000
155 esi: .long 0x00000000
156 edi: .long 0x00000000
157 esp: .long 0x00000000
158 ebp: .long 0x00000000
159 eip: .quad entry16 /* low 32 bits address
160 * high 32bits zeros
161 * uses 64bit reloc
162 */
163 .size entry32_regs, (. - 4) - entry32_regs
164