Debian Codegraph @

doc/OLDNEWS

raw
1 @(#)$eterna: OLDNEWS,v 1.2 2001/08/12 15:42:26 mrg Exp $
2
3 Changes since ircII 2.2.9:
4
5 New functions:
6
7 o onchannel(nick #channel) is `nick' on `#channel' ?
8 o pid() returns the pid of this client
9 o ppid() returns the parent pid of this client
10 o chanusers(#channel) returns a list of the users on this channel
11 o for() like c's for with the separator being `,' not
12 `;'. (hop)
13 o fe() and fec() an alternative to recursion. (hop)
14
15 New commands:
16
17 o beep sends a beep to the terminal
18 o rbind function shows the keys bound to `function'
19 o stack action list arg `action' is either push or pop. list is one
20 of `on', `alias', `assign', `bind', or `set'.
21 only `on' is implemented currently
22 o window remove nick the opposite of window add.
23 o window number num changes the refnum of a window, forcing a
24 swap if so needed.
25 o window bind #chan permanently bind a channel to a window.
26 o window unbind [#chan] remove permanent binding to a window.
27 o abort drops a core file, and a saved file (hop).
28 o disconnect [ser [reason]] disconnects from the named server (number) with
29 the given reason.
30
31 Fixed commands:
32
33 o set help_window now works again.
34 o dcc close send nick file no longer requires the full path for `file'.
35 o transpose_characters now works with the cursor at the `end' of the
36 screen.
37 o topic * now works as expected.
38
39 Changed commands:
40
41 o userhost [nicks] -cmd now accepts any number of nicks.
42 o save [-all] [...] save `all' values, or any part. valid parts
43 are: assign, alias, all, bind, notify, on,
44 set and digraph.
45
46 o clear -unhold as well as clearing the screen, it also
47 unholds one screen. same as the binding
48 clear_screen
49
50 New scripts:
51
52 o newaway does `set show_away_once on' in scripts and
53 with as many nicks as you want
54 o uhnotify gives userhost with the notify list. works
55 much better with the new userhost syntax.
56 o complete, compl.mods tcsh-like complete scripts. see script for
57 more information.
58 o imap creates an irc map. see script for more info.
59 o undernet script to make ircII understand undernet extras.
60
61 Changed scripts:
62
63 o 2.8script updated for 2.8
64 o finger updated
65 o newformat updated
66 o netsplit updated
67 o tabkey fixes for nicks with \'s in them.
68
69 New variables:
70
71 o realname changes the value of your `realname' the
72 next time you change servers (or use
73 `/quote quit').
74 o notify_handler three values. `noisy', `quiet', and `old'
75 old makes /notify work like it did for 2.2,
76 `noisy' and `quiet' make it work on a lot
77 more events. join/quit/message/etc trigger
78 the notify, the difference being that `quiet'
79 won't show these extra differences, where as
80 `noisy' will. they both add/remove the
81 name to the internal `notified' list.
82 o screen_options this is orthogonal to xterm_options for
83 /window create.
84
85 Other things:
86
87 o redirect works much better. it doesn't `catch' things it shouldn't in
88 most cases.
89 o lots and lots and logs of bug fixes
90 o ctcp flooding is handled better.
91 o lots and lots of bug fixes.
92 o on dcc_raw dcc close works.
93 o all dcc messages go to level dcc
94 o level all contains `dcc' again.
95 o lots of bug fixes.
96 o gnu `autoconf'ified.
97 o did i meantion lots of bug fixes?
98 o if you add #define DYNAMIC_SLIP, you don't need to restart ircii
99 for it to notice the ip number of the local machine has changed.
100 note: this has since been obsoleted by a smarter, more general method.
101 o /window create might be stabler. really this time.
102 o new `-q' switch does `quick start' (no .ircrc processing)
103
104
105 New things for ircII 2.2
106 ^^^^^^^^^^^^^^^^^^^^^^^^
107
108 Commands that have changed.
109 It is now possible to redirect to a DCC CHAT connecoitn with
110 REDIRECT =nick
111 You can have some command execute on the results of USERHOST with
112 USERHOST -CMD command
113 You can, and are recommented to, use WAIT different now with
114 WAIT -CMD command
115 You can have ircII create new winodows on screen or xterm's with
116 WINDOW CREATE
117 The IF and WHILE commands have changed.
118 New in 2.2.2
119 You can delete a server from the server list with
120 SERVER -DELETE <num>
121 Two new IGNORE levels, CRAP and CTCP.
122
123 New commands
124 WHICH script - returns which script will be loaded with LOAD
125 FOREACH - to iterate over a list.
126 TIMER seconds command - executes `command' after `seconds' seconds.
127 INPUT "prompt" command - executes `command' when input is read from
128 the keyboard.
129 PING nick - uses CTCP PING to work out how many seconds a remote
130 is from you.
131 PARSEKEY key - acts as though a key bound to `key' was pressed.
132 SENDLINE line - is the same as typing in the line.
133 HOOK line - does an ON HOOK check.
134 EVAL line - passes `line' to the inline parser, to be executed.
135 CTCP UTC - A time CTCP.
136 MLOAD - loads a menu.
137 New in 2.2.1
138 CTCP ECHO - Similar to CTCP ERRMSG.
139 WINDOW LOGFILE - Sets the logfile for that window.
140 New in 2.2.2
141 WINDOW NOTIFY_LEVEL - sets notify level for that window.
142 XTYPE - gives full control over /type
143
144 (Set help files for these)
145
146 New alias variables:
147 $W $V $H $U $~
148
149 New SETable variables
150 NO_CTCP_FLOOD
151 SHOW_STATUS_ALL
152 STATUS_USER1-3
153 MENU
154 HIGHLIGHT_CHAR
155 HELP_PROMPT
156 HELP_SERVICE
157 HELP_PATH
158 DCC_BLOCK_SIZE
159 LOAD_PATH
160 DEBUG
161 VERBOSE_CTCP
162 SCROLL_BACKWARD
163 SCROLL_FORWARD
164 SCROLL_END
165 TRANSLATION
166 BOLD_VIDEO
167 New in 2.2.1
168 SHOW_WHO_HOPCOUNT
169 New in 2.2.2
170 XTERM_OPTIONS
171 EIGHT_BIT_CHARACTERS
172 NOTIFY_LEVEL
173
174 And STATUS_FORMAT has these new variables
175 %W %X %Y %B %# %@
176 New in 2.2.2
177 %>
178
179 New/changed on hook's.
180 ON DCC_RAW
181 ON HOOK
182 ON INPUT
183 Several of the numeric ON's have changed.
184 New in 2.2.1
185 ON SERVER_NOTICE ***** THIS HAS CHANGED *****
186 New in 2.2.2
187 ON PUBLIC ***** THIS HAS CHANGED *****
188
189 New bindable keys.
190 ERASE_TO_BEG_OF_LINE
191 REFRESH_INPUTLINE
192 META3_CHARACTER
193 META4_CHARACTER
194
195 New functions.
196 $ENCODE()
197 $DECODE()
198 $TOUPPER()
199 $TOLOWER()
200 $TDIFF()
201 $CONNECT()
202 $LISTEN()
203 $ISCHANNEL(word)
204 $ISCHANOP(nick channel)
205 $WORD(number wordlist)
206 $WINNUM()
207 $WINNAM()
208 New in 2.2.2
209 $MYCHANNELS(window)
210 $MYSERVERS()
211
212 Other
213 You can no longer use \n in a line to separate commands.
214 Functions are now access with $name(). $%name() is not supported.
215 You can access varibles in structures by using struct[index]
216 as well as struct.index.
217 You can use { } style braces around aliases.
218 You can connected to the server via Unix domain sockets.
219 The display defaults to OFF while loading a script.
220 You can #define SCROLL_AFTER_DISPLAY to get 2.1.5 like scrolling.
221 New in 2.2.2
222 New command line option, -v, which prints the version
223 and internal version (release date).
224 You can use literal ^M's and ^J's to seperate the input line.
225
226 New in 2.2.3
227 The character atribute chars have changed in this version. They
228 are now:
229 ^_ does underline
230 ^B does bold
231 ^V does inverse.
232 ^O turns them all off.
233
234 old HISTORY file:
235 2.2.9
236 fixed memory leak
237
238 2.2.7
239 DCC SEND/GET now shows the size, if it exists.
240
241 You can now use \ to escape newlines in scripts.
242
243 2.2.5
244 New key binding, SCROLL_START, which moves the scroll
245 buffer to the start of the lastlog buffer. Bound to
246 meta1-< by default.
247
248 New arguemnt to /LASTLOG, -LITERAL, which allows you
249 to specify the next argument as the pattern to match.
250 Allows matching of numbers, eg
251 /LASTLOG -LITERNAL 6667
252
253 Channel keys, if set, are now shown in STATUS_MODE.
254
255 When DCC connections become connected, the remote IP number
256 is shown, for additional security.
257
258 2.2.3
259 I think the Makefile and config.h file are easier to use
260 now.
261
262 The control characters for bold, inverse and underline
263 have been changed to ^B ^V and ^_ respectively, so make
264 some sort of visual connection (B to bold, _ to underline)
265 with these characters.
266
267 2.2.2
268 New command, XTYPE. Happens like this;
269 XTYPE [-LITERAL] <text>
270
271 This text gets added to the input cursor, like /type does,
272 except bindings are ignored with the -LITERAL switch is
273 used.
274
275 New function $CURPOS() which returns the postition from the
276 start of the input line to where the cursor is now.
277
278 New STATUS_FORMAT variable, %> which makes anything beyond
279 it right justified.
280
281 It is now possible to close all DCC connections and kill all
282 EXEC'ec process by sending the client a SIGUSR1.
283
284 ON PUBLIC has now got this format:
285 $0 sender
286 $1 channel sent to
287 $2- message
288
289 New variable, NOTIFY_LEVEL, and window command NOTIFY_LEVEL,
290 which affect the notification of hidden windows. Same
291 arguments as LASTLOG_LEVEL.
292
293 Two new level of /IGNORE, CRAP, and CTCP.
294
295 New functions, MYCHANNELS() and MYSERVERS() added.
296 MYCHANNELS() takes a window refnum (defaults to current
297 window), and returns a string with a list of channels on that
298 windows server. MYSERVERS() returns a string of the names of
299 the servers you are connected to.
300
301 New variable, XTERM_OPTIONS, which are passed to xterm, when
302 using WINDOW CREATE. Note that -geom switches are already
303 generated by ircII, so these will be ignored by xterm.
304
305 New variables, EIGHT_BIT_CHARACTERS, which, if set, allows
306 you to input 8 bit characters (such as the Swedish character
307 set).
308
309 New SERVER option, -DELETE, allows you to remove servers
310 from the internal server list.
311
312 New command line option, -v, which prints the version
313 and internal version (release date).
314
315 2.2.1
316 New WINDOW command LOGFILE has been added. It takes one
317 argument, the file name of the logfile to be used for this
318 window. Nothing is appended to this name, if you use
319 WINDOW LOG. If you don't set a logfile for the window, and
320 use WINDOW LOG, then ircII creates a name for you (old way).
321
322 ON SERVER_NOTICE has been changed, and any script which used
323 this will most likely not work any more. In the new format,
324 $0 is the server name, and $1- is the notice itself.
325
326 New variable, SHOW_WHO_HOPCOUNT, which if set will not filter
327 out the hopcount on a who reply.
328
329 2.2c
330 New CTCP, ECHO, which just returns what you sent.
331
332 2.2
333 New alias variables `$W', `$V' and `$H' which expand to the
334 current working directory, the internal ircII release date,
335 in YYYYMMDD format, and the current numeric being processed,
336 respectively.
337
338 /ME and /DESCRIBE no longer add a period to the end.
339
340 New variable NO_CTCP_FLOOD has been added. When set, it makes
341 your client only send out one CTCP REPLY each second, and will
342 ignore anyothers it gets for that second.
343
344 New BINDable key function, REFRESH_INPUTLINE, which, amazingly,
345 refreshes the input line.
346
347 Several /ON NUMERICS's have been changed such that $0 is now the
348 server name of the originating. These include the 31x series
349 (/WHOIS replies), which in turn is /ON WHO and /ON WHOIS.
350 Numberics 401, have also been changd for this.
351
352 MSG -channel is no longer supported. Multi-channal make
353 this switch unreliable.
354
355 IRCII now supports CTCP PING. You can call this with
356 /PING nick[,nick[,nick...]]
357 And it will show you how many seconds to takes to get a
358 message to them and back. Be warned that too many nick
359 will cause the server flood control to be used, making
360 the times calculated wrong.
361
362 You can now redirect in to a dcc chat connection, with
363 REDIRECT =nick command.
364
365 2.2pre8
366 New command, INPUT has been added. It takes arguments like:
367 /INPUT "prompt" command args
368
369 Where it displays "prompt" and then calls command, with args,
370 and with the line prompted for as $*. The use of this is
371 strongly encouraged over the use of variable $"..". Similar
372 problems that occur in /wait.
373
374 USERHOST and HOST commands have been changed to allow
375 asymnronous command execution, depening on the return of
376 the userhost reply. The form is
377 /USERHOST <nick> -CMD <commands>
378
379 Where $0 - $4 expand to the nick, oper status, away status,
380 username and hostname respectively.
381
382 If you want the screen to be scrolled like it was in 2.1.5
383 and before (A line at the bottom), edit source/window.h and
384 define SCROLL_AFTER_DISPLAY.
385
386 DCC CHAT has be improved. No longer will a collision cause
387 nasty things to happen - the client will automatically connect
388 if a collision is detected.
389
390 LASTLOG has been changed so that you can now use it like this:
391 /LASTLOG <pattern> <count> to get the last <count> lines that
392 match <pattern>.
393
394 LIST -TOPIC has been fixed, and its functionality changed,
395 so that it do NOT over ride other switches, but works with
396 them.
397
398 Three new variables STATUS_USER1-3 have been added, to combine
399 with the new STATUS_FORMAT variables, %X, %Y and %Z. <poxaV>
400
401 New command, PARSEKEY, added. The argument is one of the key
402 functions, and the effect is the same as would be if you
403 pressed a key bound to that function.
404
405 New command, SENDLINE added. The arguments parsed to it
406 are processed like normal text input, except they are not
407 caught by ON INPUT.
408
409 ON INPUT changed to catch all inputted text, not just
410 text being send to a channel or a nick. New variable
411 INPUT_PROTECTION added to stop people shooting their
412 own foot with the new ON INPUT.
413
414 One new BIND functions has been implimented -
415 ERASE_TO_BEG_OF_LINE (not bound to anything by default),
416 erases from the current cursor position to the beginning
417 of the input line - <poxaV>
418
419 Added new variable HIGHLIGHT_CHAR. That is /setable to either
420 BOLD, INVERSE, or UNDERLINE. It effects the character that
421 ignore + uses.
422
423 Made dcc chat messages show the time after them, if away,
424 like normal messages.
425
426 Made ctcp not reply to global messages, either in the form
427 of $*.domain, or #*.domain.
428
429 Added a new command line argument. `-S'. It does the
430 oppsite of the `-s' option, and also made -s the default.
431 Make then run ircserv if they want it, not if they don't
432 know.
433
434 Rewrote BreakArgs() in parse.c trying to fix a bug with
435 referencing NULL pointers on domain/ox.
436
437 More of the source files reformatted. Starting to get some
438 distance with this finally.
439
440 We now understand that &channel are channels, for the 2.8 servers
441 that will be arriving soon.
442
443 DCC LIST now shows the start time, and the number of bytes
444 sent, and read on a dcc connection.
445
446 Added a ctcp reply to dcc.c so that when a dcc collision
447 occurs, we also inform the other client of the event, rather
448 than them not knowing about it. (obsoleted)
449
450 Added new functiality to the /TIMER command. If it is called
451 with out arguments, then it list the commands that were
452 added with /TIMER, that are pending to be executed. If it is
453 called with the -DELETE flag, and given a refnum (first column
454 in the timer list), it will attempt to delete the timer. You
455 can also specific the TIMER command to use a refnum of your
456 choice, with the -REFNUM n flag. It generates an error if
457 the refnum already exists, or you specify a negative number.
458 It is illegal to remove a timer from itself.
459
460 Added new functionality to /window server command. You can now
461 do /window server server.name:port:password:nick, and the nick
462 will be set properly for that server.
463
464 Two new functions, $ENCODE() and $DECODE(). They work as a
465 pair, such that $ENCODE($DECODE(blah)) will return blah, and
466 the other way around. The primary use is tha $ENCODE() always
467 returns a value that is suitable for a variable name, so that
468 the well used $strip_chan() alias is not needed. <Daemon>
469
470 Added -WIDE flag to /LIST. Shows the channel names, and their
471 sizes in as little space as possible. <Troy>
472
473 HELP now works properly again. No recusive calls to irc_io, and
474 no ping timeouts, but with the same functionality as 2.2pre7.
475
476 New variable added, HELP_PROMPT. If set ON, nothing different
477 happens, but if set OFF, then ircII will not prompt for more
478 help after showing a file.
479
480 All the header files reformatted, and some of the source files.
481
482 Fixed bug in window server which caused the client to become
483 confused about nicks for each window.
484
485 Fixed bug that caused ircII to continue trying to connect to the
486 last server in the server list if it failed on every other one,
487 and often flooded umode s people. Nasty Nasty.
488
489 Fixed bug in status.c/window.c that caused the window_notify
490 to be out of date on occasion.
491
492 When changing servers, or when the last window to a server is
493 closed, the QUIT is actually sent.
494
495 2.2pre8.troy
496 A new command has been added - /TIMER. This takes the form:
497
498 TIMER seconds command
499
500 and causes the given command to be executed after the specified
501 number of seconds. Any number of timers can be issued, and
502 they do not need to be issued in order. For example, the following
503 alias:
504
505 ALIAS JUMBLE TIMER 10 echo one;TIMER 5 echo two; \
506 TIMER 15 echo three
507
508 will cause "two", "one" and "three" to be printed at 5 second
509 intervals, starting with "two" in 5 seconds. Using /TIMER should
510 be the preferred approach over /SLEEP.
511
512 ircII can now take advantage of X windows and screen to create
513 windows in different xterms or screen windows. The command to
514 create such a window is /WINDOW CREATE. Each window created in
515 this manner gets its own input line. This feature is
516 particularly useful if you use multiple channels. There are
517 still some things to be fixed with this. In particular,
518 prompted input can give unexpected results ($"..", /Oper and
519 server passwords, confirmations), as can the old form of the
520 /WAIT command. In short, when using multiple windows,
521 expect the unexpected. To use this feature you will have to
522 define WINDOW_CREATE in source/window.c.
523
524 A new form of the WAIT command, /WAIT -CMD command,
525 (or WAIT -CMD %process command) causes the given command
526 to be executed after the wait condition has occured.
527 For example, the following alias:
528
529 ALIAS BACKWARDS wait -cmd echo hello there;echo hi there
530
531 Will actually display "hi there" before "hello there", because
532 the "hello there" echo is not executed until a WAIT token is
533 received from the server.
534
535 This new form of /WAIT is to be used in preference over the
536 old form. The old form has innumerable problems, among them being:
537
538 If one WAIT is executed while another is pending,
539 both will be registered as satisfied when the first
540 returns. A warning is now issued when this happens.
541
542 If you are in a prompted input sequence (such as oper
543 password, confirmation prompts, and $".." input),
544 results can be unpredictable.
545
546 It is not consistant with the message driven programming
547 model which exists in ircII.
548
549 With multi window enhancements the problems with WAIT become even
550 more prohibitive, unless used in the -CMD form.
551
552 If you are echoing output to the screen from within the WAIT -CMD
553 form, it is probably a good idea to record the current window
554 and use XECHO -WINDOW to ensure that output goes where it should.
555
556 2.2lynx.pre8
557 Modified /me (edit.c) to automatically append periods,
558 feature used by new 'action' script.
559
560 Revamped many scripts, the config.h, little changes to
561 Makefile and help files.
562
563 Globally replaced all put_it("*** .. by new function say()
564 and changed put_it_always into yell.
565
566
567 2.2pre7.myc6.phone
568 Added Megre support of irc 2.8, there is still a long way to
569 go here. Code for the user mode e has been written, but not
570 added, as it probably won't be in the server.
571
572 Added window refnum to the output of the WINDOW LIST command.
573
574 Notify bug on start up fixed.
575
576 Two new functions GETPID() and GETPPID() added to allow the
577 process ID, and parent process ID to be accessable with in
578 a script. These have been left out for now.
579
580 Changed the KICK command, to allow the sending of kick
581 comments.
582
583 Bug in QUIT_ON_OPERATOR_KILL fixed, where last time was
584 not `seen' for long enough to be read.
585
586 Mail checking bug fixed.
587
588 Added new variable SHOW_STATUS_ALL. When set, it shows everthing
589 in every (visible) status line. When not set, it only show
590 things that (I think) are relevant to that window, and are
591 not the same as the current window. Things like nickname,
592 usermode, are only shown on one window, if connected to only
593 one server.
594
595 Made DCC with no arguments the same as DCC LIST.
596
597 Added the window notification status to WINDOW command (no args).
598
599 Away changed to allow different away messages on different
600 servers. Two flags -ONE and -ALL (-ONE default) for the sending
601 of the away message to the servers you are on.
602
603 Bug in $RAND() fixed <Daemon>.
604
605 2.2pre7.myc6
606 HELP_SERVICE and HELP_PATH are now SETtable variables.
607
608 Memory leak in add_to_window() is fixed.
609
610 WHICH doesn't wedge the client (by corrupting load_depth) any more.
611
612 MSG *, QUERY *, CTCP *, REDIRECT *, NAMES *, LIST *. [Daemon]
613
614 $U inserts cut buffer. [Daemon]
615
616 $RAND() is a bit more portable and doesn't use floating point.
617
618 Scripts updated to use `:' as noop rather than `#'.
619
620 2.2pre7.myc5
621 QUOTE USERHOST *really* doesn't core dump any more. B-)
622
623 `voice' script updated for new script parser.
624
625 2.2pre7.myc4
626 The Makefile now handles making the symlink for config.h. This
627 has the advantage of being slightly easier to use on a machine
628 without symbolic links; you just change the `LN' variable in the
629 top-level Makefile to `cp'. It also has the advantage that we
630 won't see patch files with two copies of the diffs for config.h
631 any more. B-)
632
633 Makefile.proto has been rearranged somewhat, and the dependencies
634 have been updated.
635
636 DCC GET bug from myc2 fixed.
637
638 2.2pre7.myc3
639 All the bloody #defines at the beginning of keys.c are now in
640 keys.h.proto, and are handled by `count'.
641
642 Stupid inverse (and bold) video bug from myc2 fixed.
643
644 2.2pre7.myc2
645 ^Os are no longer appended to lines before storing them in the
646 lastlog. This avoids adding ^Os to lines in the log file when
647 using /LASTLOG. Bleah.
648
649 New commmand :, which is a noop. Using # as a noop command is
650 strongly discouraged, as it is treated differently in scripts.
651 (# at the beginning of a line in a script (ignoring spaces) means
652 to ignore the whole line.)
653
654 Bug in handling quoted braces from 2.2pre7.myc1 fixed.
655
656 `DCC GET nickname' gets the first file offered by `nickname'.
657
658 KICK comments are now displayed, if present.
659
660 Removed silly whitespace limitation in scripts.
661
662 JOIN no longer automatically adds a `#' to a channel name if missing.
663 [Avalon]
664
665 2.2pre7.myc1
666 New commands WINDOW BACK, NEXT, PREVIOUS. [phone]
667
668 New commands ON HOOK and HOOK. [Daemon]
669
670 DCC SEND and GET now display speed when transfer is finished. [Avalon]
671
672 (Rest of these by Mycroft:)
673
674 Added declaration for `newexp' in whilecmd() which Troy left
675 out.
676
677 Removed line discipline code for AIX.
678
679 Fixed ON_KICK.
680
681 Tabs now display in reverse video after limit reached, so you
682 can actually see them.
683
684 -c works again.
685
686 ON WINDOW doesn't recurse (and thus doesn't crash).
687
688 TOPIC and ACTION messages go in the right windows.
689
690 PAUSE_AFTER_MOTD is now a compile-time option and actually
691 works.
692
693 QUOTE USERHOST doesn't crash.
694
695 QUOTE ISON does something sensible.
696
697 USERHOST and ISON with no arguments no longer corrupt the
698 whois queue.
699
700 \ is no longer converted to \\ by /SAVE and in the history.
701
702 /MSG FOO, does the right thing.
703
704 /TYPE \^ now types out a caret, which you couldn't do before.
705
706 White space around braces is less important. The main effect
707 is that K&R style braces now work. You should be able to use
708 whatever indenting style you prefer. Note that braces inside
709 a command should be quoted now, a la \{ and \}.
710
711 2.2pre7
712 Meta4 is now sticky. That is, Meta4-C-D-E-F-G invokes the
713 meta4 versions of C, D, E, F and G. This effect lasts until
714 meta4 is invoked again. Additionally, the Meta4 characters
715 ^h, SPACE, h, i, j, k, x, H, I, J, K, L and X have been
716 bound in such a way that BIND ^[ META4_CHARACTER now
717 gives a vi editing mode.
718
719 Bugs in complex '@' expressions fixed.
720
721 Thu Jun 11 09:48:47 1992 Charles Hannum ([email protected]):
722
723 * Makefile: Change RS/6000 support.
724
725 * config.h (DEFAULT_STATUS_CHANNEL): Delete duplicate definition.
726
727 * script/action: Remove `on's.
728
729 * script/bigcheese: Convert to 2.2pre6 syntax.
730 script/finger.who, script/fnet, script/killpath: Likewise.
731 script/kpstat, script/log, script/nicks, script/repeat: Likewise.
732 script/shell, script/voice: Likewise.
733
734 * script/version: Update version number.
735 script/netsplit: Rewrite to handle multiple splits.
736 script/brc: Fix typo.
737
738 * source/alias.c: Change function prototypes to match definitions.
739 source/ctcp.c, source/edit.c, source/status.c: Likewise.
740 source/term.c, source/translat.c, source/vars.c: Likewise.
741 source/window.c: Likewise.
742
743 * source/edit.c: Put comment delimiters around text after #endif.
744 source/help.c, source/hold.h, source/irc.h, source/ircaux.c: Likewise.
745 source/lastlog.h, source/term.h: Likewise.
746
747 * source/exec.c: Add support for AIX 3.
748 source/help.c, source/irc.h, source/ircserv.c: Likewise.
749 source/log.c, source/newio.c, source/scandir.c: Likewise.
750 * source/ircaux.c: Rename _RS6000 to _IBMR2.
751 source/status.c: Likewise.
752 * source/term.c: Remove unnecessary code for AIX 3.
753
754 * source/vars.c: Replace NULLs with 0s in integer context.
755
756 * source/status.c (convert_sub_format): Make bletch an array to
757 prevent being put in readonly storage.
758 (status_channel): Use format string even if *private*.
759
760 * source/notice.c (parse_server_notice): Don't call
761 reconnect_all_channels and reinstate_user_modes if first connect
762 (phone bug).
763
764 * source/menu.c: Make sure menu cursor doesn't get redrawn if menu
765 disappears.
766
767 * source/exec.c: Make sure messages get redirected after EXEC output.
768
769 * source/edit.c (evalcmd): Fix EVAL when subargs == NULL.
770 source/if.c (ifcmd, whilecmd, foreach): Likewise for IF, WHILE,
771 and FOREACH.
772
773 * source/if.c (whilecmd): Copy exp on every iteration, as parse_inline
774 destroys it.
775
776 * source/irc.c: Update version number.
777
778 * source/dcc.c: Include arpa/inet.h for prototypes.
779
780 * script/ping, script/whowas: New scripts.
781 2.2pre6
782 WARNING. 2.2pre6 will almost certainly require changes
783 to your .ircrc and script files due to changes in the
784 parsing. The intention at this point is to keep the new
785 syntax forever. That is, unless there's something I
786 have missed, there will be no further script breaking
787 changes.
788
789 DISPLAY now defaults to OFF in scripts.
790
791 Two new meta keys have been added. Meta3 is bound by
792 default to META1-[, and Meta4 is left unbound.
793
794 DCC SEND now checks that a file exists before sending
795 the request. Memory allocation bugs when using DCC
796 file transfers with ~ pathnames fixed.
797
798 If you have experienced corrupted output from ircII,
799 this should be fixed.
800
801 Several display bugs, including a memory leak related
802 to using windows have been fixed.
803
804 Missed PINGs when in the help pager fixed.
805
806 A new command, EVAL, has been added. EVAL causes
807 its arguments to be passed through variable substitution
808 and executed.
809
810 Alias substitution is no longer performed in scripts,
811 regardless of the setting of INPUT_ALIASES. To force alias
812 substitution, use EVAL.
813
814 A command beginning with '@' is taken to be an
815 alias expression as would be normally parsed
816 from within ${}. The expression is substituted and
817 the substituted value discarded.
818
819 The script loading path is now accessible as the SET
820 variable, LOAD_PATH. Additionally, if you are unsure
821 as to which directory a script being loaded is in,
822 the /WHICH command will display the full path to a
823 script. eg. /which global shouls give something on all
824 systems.
825
826 Bugs in Menus which caused core dumps have been fixed.
827
828 Bug in DCC which caused incoming DCC messages not to be
829 directed to window level DCC fixed.
830
831 Bug with +s channels and /names fixed.
832
833 Connections to servers on UNIX domain sockets are now
834 supported.
835
836 Aliases can now be recursive up to a maximum level
837 as specified in the variable MAX_RECURSIONS.
838
839 The inline variable parser now substitutes \n, \r, \0
840 and \p too their equivalents in the CTRL-P convention.
841
842 Having ! as the first character for the INDEX function
843 no longer causes just unescaped characters to be matched.
844 It is now a normal character in this context.
845
846 The $%FUNCTION syntax is no longer supported. You can
847 still use functions - just remove the '%'.
848
849 The parser used when INPUT_ALIASES is on has been changed
850 again. Text between brackets (...) and {...} is no longer
851 subject to alias expansion, unless the opening bracket is
852 escaped (ie... \( or \{ ). This affects alii and input when
853 INPUT_ALIASES is on.
854
855 Additionally, You can return to full alias substitution
856 within ${...} by enclosing the substitution text in
857 [...]. Thus if $0 == test, and $bear == black
858 ${[$0]} expands to "test"
859 ${[$bear]} expands to "black"
860 ${bear} also expands to "black"
861 ${ bear == [black] } expands to "1",
862 ${ [$0] == [test] ) expands to "1"
863 ${ [$0] == [black] ) expands to "0"
864 ${ [$0](this) } expands to the return value of $test(this)
865
866 There is a new form for the if command. This is:
867 if (expr) {then_commands} {else_commands}
868 Note that because the expression, the then_commands
869 and the else_commands are between brackets, they are
870 not expanded in alias expansion. This is taken care of
871 in the if statement itself. The expression is treated
872 as if it were enclosed in ${...}. Thus all the comparisons,
873 groupings, arithmetic and boolean operations that a
874 available in ${...} can be used in the expression.
875 Also note that you can have more than one command in
876 each of the then and else parts of the condition.
877
878 The result is that what used to look like this:
879
880 on ^send_public * if "$^!^=^>^<C=$^!^=^>^<0" \
881 "echo $%format(11 <$N>) $^"1-" \
882 "echo $%format(10 <$N):$^"0> $^"1-"
883
884 can (and must) now be expressed like this:
885
886 on ^send_public * if ( C == [$0] ) \
887 { echo $format(11 <$N> $1- } \
888 { echo $format(10 <$N):$0> $1- }
889
890 Note that this means there is no longer any need for using the
891 ^ escaping, and this may disappear in a later version unless
892 there are strong objections.
893
894 The same thing has happened to while and foreach, which now
895 have the syntax:
896 WHILE (expr) {commands}
897 AND
898 FOREACH structure index {commands}
899
900 The effect of this on WHILE and FOREACH is that you no longer
901 need to double up occurrences of '$'. You can still get this
902 effect if you wish by escaping the leading bracket in the
903 appropriate expression. Additionally, both while and foreach
904 can now be recursive. Thus the following works as expected:
905
906 assign a.1.1 one one
907 assign a.1.2 one two
908 assign a.2.1 two one
909 assign a.2.2 two two
910 alias fe
911 {
912 foreach a i
913 {
914 foreach a.$i j
915 {
916 echo $i $j $a[$i][$j]
917 }
918 }
919 }
920
921 THE OLD SYNTAX FOR IF, WHILE AND FOREACH IS NO LONGER SUPPORTED.
922
923 In scripts, lines beginning with '{' and containing other text
924 are joined on to the previous line with one space placed between
925 the two lines, thus the above example could have been written as:
926
927 on ^send_public * if ( C == [$0] )
928 { echo $format(11 <$N> $1- }
929 { echo $format(10 <$N):$0> $1- }
930
931 Additionally, the {..} syntax for grouping within scripts
932 can now be nested. Nested {...} pairs must have the brackets
933 placed on their own line, and the brackets are included in the
934 resulting text. Thus the following is equivalent to the above:
935
936 on ^send_public * if ( C == [$0] )
937 {
938 echo $format(11 <$N> $1-
939 }
940 {
941 echo $format(10 <$N):$0> $1-
942 }
943
944 Or, for a little more verbosity:
945
946 on ^send_public * if ( C == [$0] )
947 {
948 echo Current Channel:
949 echo $format(11 <$N> $1-
950 }
951 {
952 echo Another Channel:
953 echo $format(10 <$N):$0> $1-
954 }
955
956 2.2pre5
957 Bug in "Password" prompt for server passwords fixed.
958
959 Bug in WINDOW REFNUM fixed. <phone>
960
961 Bug in ON DCC_CHAT which prevented interaction with
962 the server fixed. <phone>
963
964 Bug which caused +w'd non-opers to see their own WALLOPs
965 twice fixed. <phone>
966
967 Additional operators have been added to the ${...}
968 expresions. They are the equality and inequality
969 operators (==, !=, >, >=, <, <=), the unary NOT
970 operator (!), and the conjugation operators (&&, ||, ^^).
971 These take 0 as false and any other number as true,
972 and return 1 as true and 0 as false.
973
974 On top of these are the assignment operator (=) and the
975 string concatenation operator (##). The assignment operator
976 means that the following now makess sense, and causes the value
977 of first_name and last_name to be concatenated with a space
978 inserted between them, and the value assigned to full_name.
979
980 @ full_name = first_name ## [ ] ## last_name
981
982 The following is also possible:
983
984 @ a = b * (c + d)
985
986 A new variable has been added for script developers.
987 The DEBUG variable enables three types of debugging
988 output dependant on the settings of various bits.
989 bit value purpose
990 0 1 Display all commands executed
991 1 2 Display all alias substitutions made
992 2 4 Display all function calls and return values
993
994 More changes to parsing have occured. Firstly, there
995 is no longer any '\' substitution on input. Thus, when
996 you type text to a channel, in a /msg or elsewhere, it
997 comes out exactly as you type it.
998
999 On the other hand, '\' processing does exist anywhere
1000 that alias expansion occurs. The result is that if you
1001 have INPUT_ALIASES ON, you won't notice the difference.
1002 Also, aliases and ons still get the '\' substitution
1003 performed on them. All \c pairs where c is any character
1004 are collapsed to just 'c' after all parsing has been done,
1005 with the exception of ", !, =, < and >, which are
1006 required by if and while. This shouldn't be the case
1007 for much longer.
1008
1009 Function and array index expansion now only observes
1010 unescaped bracket delimiters. Thus $%index(\) abc\)def)
1011 returns 3.
1012
1013 Finally, the '%' is no longer needed for functions.
1014 Thus you the above example is the same as
1015 $index(\) abc\)def)
1016
1017 The net result of all the changes to parsing in this
1018 version should be to make both command entry and alias
1019 construction much more intuitive.
1020
1021 A new function, TDIFF, has been implemented.
1022 TDIFF takes as its argument a time interval in seconds
1023 and returns it as the english representation of
1024 that number in the form:
1025
1026 dd days hh hours mm minutes ss seconds
1027
1028 omiting any zero values, unless all values are zero,
1029 in which case the seconds field is returned.
1030
1031 Bugs in dumb mode fixed.
1032
1033 The parsing of ${} expressions has been changed. When
1034 mathematical expressions are being used, order of
1035 operations is respected and brackets are recognised
1036 and treated correctly. Additionally, functions can
1037 be referenced (without needing the % qualifier), and
1038 functions and aliases can be mixed to give versatility.
1039 This may break some numeric expressions, but will make
1040 a lot more a whole lot more legible and intuitive. For
1041 example, the following:
1042
1043 ${3*(INDEX(x abcxdef)+2)}
1044
1045 Yields 3*(3+2) = 15
1046 or, if you have an alias:
1047
1048 ALIAS TEST echo ${INDEX(x $0)*5}
1049
1050 and then type:
1051
1052 /TEST abcxdef
1053
1054 you will get back 15
1055
1056 Then, if you have a set of functions, A.1, A.2, A.3,
1057 and the variable IND is set to 2, then ${A[$IND]()}
1058 will resolve to an invocation of A.2 as a function.
1059
1060 If you have a function, F, and a pair of arrays A
1061 and B, each with elements numbered 1-10, and F returns
1062 either A for 1 and B for 2, then the following:
1063
1064 ${F(2)[5]}
1065
1066 returns element 5 from array B.
1067 Because order of operations is now respected, both
1068 ${3*2+5} and ${5+2*3} return 11.
1069
1070 2.2pre4
1071 /WHO * now results in failure if you are not on a channel.
1072
1073 Behaviour of positioning when menus are being used has been
1074 corrected. There's the possibility that I broke something
1075 else while doing it though.
1076
1077 The worst of the memory leaks has been fixed. There are
1078 still some memory leaks apparently present. If you compile
1079 with ALLOC_DEBUG defined, then when the memory tracking
1080 table gets full (indicating a leak), IRCII will abort,
1081 generating a debug.log which lists all allocated blocks
1082 with their sizes and contents in ASCII. This should
1083 prove helpful in tracking leaks.
1084
1085 The slosh (\) no longer quotes characters which have no
1086 special meaning, thus allowing you to enter a '\' in the
1087 text without doubling it up. Additionally, The \n sequence
1088 no longer works. Use ';' in aliases instead, and quote the
1089 CR or NL character to get the same effect interactively
1090 (ie. ^Q^J or similar).
1091
1092 Fixes to the multitude of bugs in pre3.
1093
1094 2.2pre3
1095 If the environment variable "MAIL" is set, IRCII now uses
1096 it to determine which file to check for mail.
1097
1098 The VERBOSE_CTCP variable has been fixed.
1099
1100 A new function, CONNECT(), gives access to TCP sockets
1101 at the application level. The arguments are the destination
1102 host and port number, and the return value is the
1103 file descriptor (fd) associated with that socket.
1104 A null file descriptor indicates that the host could
1105 not be resolved, and a negative descriptor indicates
1106 that an error occured in connecting.
1107
1108 To test this facility, create a connection to the
1109 echo service on some machine with:
1110
1111 /alias socktest echo $%connect(host 7)
1112
1113 Which will echo the file descriptor.
1114 Then send messages to it with:
1115
1116 /dcc raw fd host message
1117
1118 These will be echoed back at you by the remote host.
1119 Incoming messages can be intercepted with ON DCC_RAW,
1120 which has the following formats:
1121
1122 fd host D data
1123 fd host C
1124 fd host N port
1125 fd host E port
1126
1127 The D message indicated incoming data.
1128 The C message indicates that the socket has been closed.
1129 The N message indicates that a socket listening on the
1130 specified port has accepted a connection. fd in this case
1131 is the file descriptor for the new connection.
1132 The E message is generated when a CONNECT() results in a
1133 successful connection.
1134
1135 The LISTEN() function creates a listening socket. It takes
1136 a single argument - the port number on which to listen. If
1137 this is zero, then a port number is assigned. The return
1138 value is the port number on which the socket is listening
1139 for connections. A port number below 1025 results in an
1140 error.
1141
1142 Conventions to be used for the socket access:
1143
1144 Scripts using sockets should never use the
1145 serial number 0 in their hooks. As their first
1146 act before using the DCC_RAW hooks, they should
1147 set:
1148
1149 ON ^DCC RAW * #
1150
1151 To ensure that all raw DCC sockets produce no
1152 output.
1153
1154 A new set of hooks should be created for each
1155 active socket at a chosen serial number. One
1156 must always exist to detect the close message,
1157 and as its last act must remove all the hooks
1158 for that file descriptor.
1159
1160
1161 You can now "send" a message to a command. For example,
1162 /msg /echo this is a test
1163 is the same as
1164 /echo this is a test.
1165 The primary use of this is to allow a /QUERY of a command.
1166 Thus if you /query /echo, everything you type to the
1167 current window will simply be echoed back, and if you
1168 /query /exec, you can use IRCII as a shell. Note that
1169 when querying a command, you may need to use XECHO -WINDOW
1170 to ensure output goes to the right place.
1171
1172 CTCP UTC has been added. This is primarily for robots
1173 to send date and time information to users and have it
1174 displayed in local time. The format of the UTC
1175 CTCP is:
1176 UTC number
1177 where number is the ASCII representation of the 32 bit
1178 integer representing the time as is used on UNIX machines.
1179 When IRCII receives this CTCP, it replaces the text of
1180 the local time expressed in the local language back into
1181 the original message. Thus if you send the following:
1182
1183 /NOTICE nick The time is ^AUTC 702777074^A
1184
1185 The user might see:
1186
1187 -yournick- The time is Thu Apr 9 09:51:14 1992
1188
1189 (if their timezone is Australian Eastern Standard Time).
1190
1191 Menus have been added. The menus are totally user
1192 configurable and a test menu has been provided in
1193 the top level directory of the IRCII source distribution.
1194 To use this menu, copy it to your home directory,
1195 run IRC, and to the following:
1196
1197 /MLOAD test
1198 /SET menu Main Menu
1199
1200 Control-R is bound to ENTER_MENU, and while in the menu
1201 you can use vi-like keys or EMACS-like keys to move
1202 through the options, and either '.' or SPACE to select
1203 an option. The format of the menu file is as follows
1204
1205 A line beginning with a '#' represents a comment.
1206 Blank lines are ignored.
1207 A line beginning with the word "MENU" starts a new menu
1208 and gives it a name.
1209 A line beginning with the word "OPTION" adds a new option
1210 to the menu, gives it a name and describes what it does.
1211
1212 For more information, see the demonstration menu shipped
1213 with the sources.
1214
1215 Bug which cleared the input line when calling WAIT from
1216 ON TIMER fixed.
1217
1218 Bug which left channel names from a previous connection
1219 in the channel list even if they could not be rejoined
1220 fixed.
1221
1222 User modes are now restored after a disconnect/reconnect.
1223
1224 Bug which caused the scrollback buffer to duplicate messages
1225 when HOLD_MODE is on fixed.
1226
1227 USERHOST is now used in place of WHOIS to retrieve IRC-Op
1228 information on WALLOPing users and in the case of 2.6.2
1229 servers, user@host information for IGNORE. This means
1230 that there are now three commands going through the WHOIS
1231 queue - WHOIS, ISON and USERHOST. It is not a good idea
1232 to /quote these, as you will be likely to corrupt the
1233 WHOIS queue. USERHOST can now be issued with /HOST and
1234 /USERHOST
1235
1236 It is now possible to have more than one ON hook executed for
1237 each event triggering a hook. This has been done by adding a
1238 new serial number concept to the ON command. Each ON hook has
1239 a serial number attached. Serial numbers can be any number
1240 from -maxint to maxint, with the default being 0.
1241
1242 When an event triggers a hook, IRCII now goes through the ON
1243 hooks added for that event, and for each serial number used
1244 by ON hooks in that hook type, finds the best match out of those
1245 ON hooks which have that serial number and executes that ON
1246 hook. The hooks are executed in order of serial number. Thus
1247 if you set up the following set of MSG hooks.
1248
1249 ON #^MSG -666 * echo Message coming:
1250 ON ^MSG * echo Message from $0: $1-
1251 ON #^MSG 666 * echo I got one, I got one!
1252 ON #^MSG 666 WiZ echo WiZ hath spoken
1253
1254 will cause the following to appear when you receive a message:
1255
1256 Message coming:
1257 Message from nick: text
1258 I got one, I got one!
1259
1260 And the following if you receive a message from WiZ:
1261
1262 Message coming:
1263 Message from WiZ: text
1264 WiZ hath spoken
1265
1266 The default serial number is 0, and the serial numbers are always
1267 executed in order, starting with the lowest, and ending with the
1268 highest.
1269
1270 Although the '^' modifier can be used with any serial number,
1271 it will only suppress the decault action if used with serial
1272 number 0. Thus if the only message hook you have is:
1273
1274 ON #^MSG -666 * echo Incoming:
1275
1276 You will see the following when you receive a message:
1277
1278 Incoming:
1279 *nick* text
1280
1281 It is advisable to place any ON hooks which do not suppress the
1282 default action in a serial number other than 0. In particular,
1283 TIMER hooks, which are generally not intended to exclude other
1284 TIMER hooks, should be placed at different serial numbers wherever
1285 possible, and never on 0 (since 0 is the most likely place to
1286 get a clash if anybody does use it).
1287
1288 The # modifier (bind to current server) for ON commands has been
1289 changed to '&'.
1290
1291 Fixed display bug with reverse and bold modes which caused
1292 these modes to be turned off if a line wrapped. Also fixed
1293 NOTIFY and LINKS problems.
1294
1295 The bug in user mode processing when a MODE command makes no
1296 actual changes to the user mode has been fixed.
1297
1298 A new status line variable, %B, gives the number of lines
1299 in the hold buffer for the current window. Its format
1300 is controlled by the STATUS_HOLD_LINES variable. %B is only
1301 updates once for every ten lines.
1302
1303 New status line variable, %# added. This returns the current
1304 user mode. Its format is controlled by the STATUS_UMODE
1305 variable.
1306
1307 The behaviour of FLUSH when HOLD_MODE is on has changed.
1308 it now clears the hold buffer for the current window before
1309 flushing further output from the server. The result is that
1310 with HOLD_MODE on it is now impossible to get into a
1311 situation where you are being flooded by server output
1312 with no hope of reprieve.
1313
1314 2.2pre2
1315 ^G bug fixed. A couple of small things cleaned up.
1316
1317 2.2pre1
1318 Note that there have been several new variables added in
1319 this version, so old config.h files won't work. Also the
1320 IRCIIhelp service is being regionalised. You should set
1321 HELP_SERVICE to the nearest IRCII help service in config.h
1322
1323 Three new BIND functions have been implimented -
1324 SCROLL_BACKWARD (bound by default to ESC-p), SCROLL_FORWARD
1325 (bound by default to ESC-n), and SCROLL_END (bound by
1326 default to ESC-e). These allow you to scroll through the
1327 output stored in LASTLOG without having to use the
1328 LASTLOG command. SCROLL_BACKWARD causes IRCII to scroll
1329 half a window of LASTLOG data on to the screen, pushing
1330 whatever is in the window towards the bottom. ESC-p
1331 reverses this, thus looking at newer parts of the LASTLOG
1332 history. ESC-e exits this scrollback buffer facility
1333 at any time. This facility is probably best used with
1334 HOLD_MODE set to ON, and requires SCROLL to be set to ON.
1335 If you use this facility with HOLD_MODE off, then when you
1336 leave the scrollback buffer, either by SCROLL_FORWARDing
1337 to the end of it or SCROLL_ENDing, all text that has been
1338 accumulated will be printed. If you have HOLD_MODE on,
1339 the window will be held until you manually unhold it.
1340
1341 Provision has been made for memory allocation debugging
1342 for developers. Add -DALLOC_DEBUG to the CFLAGS, and
1343 IRCII will abort (generating a core dump) should memory
1344 be freed which was never allocated. Additionally, a
1345 dump will be made showing the locations of all allocated
1346 memory with the two preceding long integers in memory.
1347 Additionally, SEGV will be trapped and will generate
1348 a similar log, with the addition that if you are using
1349 an IBM RS6000 it will dump a heap walk. People on other
1350 platforms will need to either add heap walk code for
1351 those systems or manually walk the heap using the
1352 debugging information. The dump is stored in debug.log
1353
1354 A new XECHO flag, -WINDOW, has been implimented. Thus:
1355 XECHO -WINDOW 1
1356 always sends output to window 1, and
1357 XECHO -WINDOW JUNK
1358 always sends output to the window named "junk". If the
1359 window does not exist, the -WINDOW flag has no effect,
1360 except to cancel any earlier -WINDOW flag.
1361
1362 Two new modifiers have been added to /ON. If the first
1363 character of the first argument (the hook name or numeric
1364 number) is '#' or '@', the ON only affects things relating
1365 to the current server. Additionally, if it is '@', and there
1366 is no match for things in the list of ONs applying to the
1367 current server, it will not resort to the default list.
1368 [Changed in pre3]
1369
1370 WHO -LUSERS (returns only non-operators) and
1371 WHO -NICK <nickname> (returns only people matching the
1372 nickname argument) have been implimented.
1373
1374 A new variable, DCC_BLOCK_SIZE controls the size of
1375 blocks sent when sending files using DCC SEND.
1376 The default is normally 512. Increasing this number
1377 increases network efficiency. Decreasing this number
1378 slows down the transfer, but also decreases the chances
1379 of the transfer being aborted over bad links.
1380
1381 Use of real estate when SCROLL is ON has been improved.
1382 There is no longer a blank line between the text and
1383 the status bar. This takes a little getting used to,
1384 as now the screen scrolls before a line is printed
1385 rather than after.
1386
1387 You can now include text modification characters
1388 (^B, ^V, ^_ and ^O) in STATUS_FORMAT. If you change
1389 the format at the start of STATUS_FORMAT, you will
1390 have to do it again after any %C or %U, as these
1391 both reset it to reverse video.
1392
1393 You can no longer abbreviate QUIT, SIGNOFF, BYE or EXIT
1394 in NOVICE mode.
1395
1396 All restrictions on IGNORE by user@host removed.
1397
1398 Internals given a decent reworking. There could be bugs here.
1399 You should now never see ircd's colons marking the last
1400 argument.
1401
1402 Added two new wildcards to the pattern matching system.
1403 '%' matches any sequence of characters except a space.
1404 '?' matches any single character.
1405
1406 International character set support added. Translation
1407 tables are supplied for various terminal types. To activate
1408 the appropriate character set, /SET TRANSLATION charset_name
1409 eg. For an IBM PC set up for US English (Code page 437),
1410 /SET TRANSLATION CP437
1411 The translation tables assume that text transmitted on the
1412 servers adheres to ISO 8859/1. If your terminal understands
1413 ISO8859/1, set TRANSLATION to LATIN_1. The default is ASCII,
1414 due to the fact that nothing can be safelt assumed about any
1415 terminal.
1416
1417 Bug in /set history 1 fixed
1418
1419 Bug with redirecting to yourself fixed. It is now illegal
1420 to redirect to yourself.
1421
1422 $P (Chanop status variable) fixed, and a new status line
1423 substitution, %@, which subsitutes to STATUS_CHANOP if
1424 you are chanop on the channel shown on the status bar.
1425
1426 $~ now substitutes to the last word on a line.
1427
1428 New functions:
1429
1430 ISCHANNEL(word) Returns 1 if word is a valid
1431 channel name.
1432 ISCHANOP(nick channel) Returns 1 if nick is a chanop
1433 on the given channel.
1434 WORD(number wordlist) Returns the specified word from
1435 wordlist. The first word is
1436 numbered 0.
1437 WINNUM() Returns the current window number.
1438 this is always the window which is
1439 indicated by STATUS_WINDOW.
1440 WINNAM() Returns the current window name.
1441 this is always the window which is
1442 indicated by STATUS_WINDOW.
1443 If the window has no name, it returns
1444 nothing.
1445
1446 INVERSE_VIDEO variable and beyond fixed.
1447
1448 A new character attribute, bold, has been added. This
1449 is enabled and disabled with ^_. Disabling bold has
1450 the side effect of disabling inverse and underline
1451 without recording it internally. You should allow for
1452 this when using bold text. Bold text can be enabled
1453 and disabled with the BOLD_VIDEO variable.
1454
1455 The status line problems with attribute characters
1456 have been fixed. You can now include attribute characters
1457 in the status line and they will take effect. One
1458 application of this is to change the status bar from
1459 inverse text to bold or underlined by including ^_ or
1460 ^V at the start of STATUS_FORMAT.
1461
1462 You can now refer to the elements of structures
1463 (normally Structure.Element) as Structure[Element].
1464 When you do this, Element is evaluated as an expression
1465 before it is appended to Structure. Thus if A has the
1466 value "TEST", and there is a variable "B.TEST" with the
1467 value "Message":
1468 echo $B[$A]
1469 yields:
1470 Message
1471 These can be repeated, as in:
1472 $MATRIX[0][0]
1473 which becomes "$MATRIX.0.0". The result is a pseudo-array
1474 effect.
1475
1476 New command, FOREACH has been added. The format is
1477 FOREACH structure variable command
1478 This causes command to be executed once for each
1479 element in the named structure, with variable
1480 substituted to the name of the element. Thus
1481 if you have assigned:
1482 /ASSIGN A.1 ONE
1483 /ASSIGN A.2 TWO
1484 /ASSIGN A.3 THREE
1485 /ASSIGN A.4 FOUR
1486 /ASSIGN A.5 FIVE
1487 and have an alias:
1488 /ALIAS SHOWA FOREACH a i ECHO $$i
1489 and type
1490 /SHOWA
1491 The output will be:
1492 1
1493 2
1494 3
1495 4
1496 5
1497 Alternatively, you can use:
1498 /ALIAS SHOWA FOREACH a i ECHO $$a[$$i]
1499 to get:
1500 ONE
1501 TWO
1502 THREE
1503 FOUR
1504 FIVE
1505 Note that if you use numbers, 11 comes before 2.
1506 The easiest way around this is to start numbering
1507 elements at a higher number, such as 100.
1508 Note that FOREACH, like WHILE, does variable
1509 substitution once when the FOREACH command is
1510 evaluated, and once for each iteration. This
1511 means that in general you will need to double
1512 up any occurences of '$'.
1513 2.1.5b-2.1.5g
1514
1515 Functionality of WHO -HOST and WHO -SERVER returned.
1516
1517 New WHO flags, -HERE and -AWAY added.
1518
1519 New functions:
1520
1521 MATCH(pattern word-list) Returns an index into the word
1522 list of the first word that matches
1523 the pattern, starting at 1 and
1524 returning 0 for no match.
1525 RMATCH(word pattern-list) Returns an index into the pattern
1526 list of the pattern that word best
1527 matches.
1528 STRIP(charlist line) Strips all occurrences of characters
1529 contained in charlist from the line.
1530
1531 You no longer need to supply the leading # to JOIN and PART.
1532 If the leading # is omitted, and you are on a 2.7 server,
1533 it will be inserted. Notable exceptions to this rule are
1534 channel '#', which would have no name if the # were omitted,
1535 and channels beginning with '##'.
1536
1537 CTCP Action format changed so as not to interfere with channel
1538 text. ON ACTION and ON SEND_ACTION added. You can now suppress
1539 ACTION text with these, or reformat it.
1540
1541 Many bugs fixed.
1542
1543 2.1.5-2.1.5a
1544
1545 New functions:
1546
1547 USERHOST() Returns the user@host of the sender
1548 of the message currently being
1549 processed.
1550
1551 WHO -HOST and -SERVER is no more supported. (This is reenabled
1552 in a later version).
1553
1554 The contents of an alias can now be surrounded by '{' and '}'
1555 in and broken over multiple lines. See script/finger for an example.
1556
1557 Indentation with leading tabs and spaces is now permitted in script
1558 files. See /HELP LOAD.
1559
1560 HOLD_MODE no longer holds when you are being active in that window.
1561
1562 If you have SHOW_AWAY_ONCE on, away messages are remembered and
1563 only displayed when they change.
1564
1565 Notification of the receipt of a CTCP request no longer occurs
1566 unless VERBOSE_CTCP is on.
1567
1568 Prompts from EXECed processes now appear in the input window if
1569 $T appears in INPUT_PROMPT.
1570
1571 Scripts and help files can now be stored in compressed format.
1572 They will be uncompressed as they are used.
1573
1574 All the scripts have been updated and many helpfiles written and
1575 rewritten. Many bugs have been fixed, support of newer server
1576 features added. Server 2.7 compatibility improved.
1577
1578 There have been major changes in the command parser. Commands
1579 are not expected to have a leading / unless entered interactively,
1580 if you experience incompatibilities, you will have to add 'say' and
1581 'send' wherever you have made aliases that send to the channel or query.
1582 See also /help ircII programming for this. Also the ';' has a new
1583 meaning as command seperator within ALIAS, BIND and ON. You might have
1584 to \escape it.
1585
1586 CTCP ACTION has been implemented which permits you to send
1587 descriptions of actions/'feelings' to other people on channels
1588 and even through queries. You can use it with /me and the action
1589 script. See also: /help load action.
1590
1591 * 2.1.5 (by lynX) Text is historically from new to old, that is - read it from bottom to top!
1592
1593 Updated help files: NEWS LOAD/* WHOIS IRCII/IRCII IRCII/PROGRAMMING
1594 ALIAS/ALIAS BIND/PARSE_COMMAND BIND/EXAMPLES ON/ON CTCP/* ME DESCRIBE
1595 ON/SIGNOFF SEND SAY NOTIFY SET/COMMAND_MODE ALIAS/SPECIAL RESTART
1596 SET/LASTLOG_LEVEL
1597
1598 Threw out /who -s and -h, they were superflous and bad.
1599 Cleaned up the vars.h and hook.h by cleaning the protos... FINALLY!
1600 Wrote count.c and the proto headerfiles, adapted the Makefile.proto
1601 Added underlining mechanism with put_it-code ^V.
1602 Updated man page a bit.
1603 Added optional code to limit the notify list length (MAX_NOTIFY).
1604 Removed lots of do_hook-numeric if's by splitting the numeric's switch.
1605 Rewritten /notify list.
1606 Simplified notify.c and whois.c to no more support channel notify.
1607 (If ISON doesn't, why should we then?).
1608 Added Troy's alias functions MATCH and USERHOST, but no HELPs.
1609 Added support for { } constructs in scripts and indentation.
1610
1611 Removed the oper-flags from the IRC commands, if you issue oper commands while
1612 you're not one, you get the beautiful ircd error messages.
1613
1614 Seem to have fixed the problem in the status_mail sprintf...
1615 Changed the handling of 2.7 UserHost in PRIVMSG etc.
1616 The $, is now also set when you get an invitation.
1617 Added oneself's nickname as command alias for /me. "/lynx smiles."
1618 Improved HOLD_MODE: it no more holds a window if the user is being active on it.
1619 Added some numeric codes in numbers.c for 2.7 compatibility.
1620 Added support for ~ in IRCPATH, but only referring to the user's own home-dir.
1621 Suspended a piece of new code in mail.c which seems to cause weird problems.
1622 Introduced lastlog_level 'ACTIONS' to log in and outgoing CTCP ACTION lines.
1623 Made 317 (whois-idle) a tiny bit smarter (seconds or minutes).
1624 Added #ifdef SVR4 code.
1625 Added SHOW_AWAY_ONCE and VERBOSE_CTCP vars.
1626 Replaced QUIT_ON_KILL variable by a #define.
1627 Applied Allanon's patches to ctcp.c and dcc.c, removal of DCC/SENDCRC + GETCRC.
1628 Added support for numeric 364 (new LINREPLY). Old LINREPLY code not removed.
1629
1630 New handling of process prompts. In the past they were put into the window->prompt
1631 and then inserted into the INPUT_PROMPT var mask, which looks *ugly*, also the
1632 input would not get echoed. Now it does this: If a prompt is detected you are
1633 elegantly prompted, as if you were in the program itself, when you enter your
1634 datum prompt and input are displayed in the window the way it would look outside
1635 ircII. This is a great step towards using ircII as an interface to all kinds of
1636 things, ircII + /bin/sh as a replacement for tcsh.. Ha ha I'm kidding. Well, for
1637 a MUD client it's fine. ircII can now be used as MUD client.
1638 BTW, I had to do profound changes in the handling of prompts throughout the source.
1639
1640 Fixed ancient bug concerning process-query: you can now type 'just CR' into an exec.
1641
1642 Fixed strange bug with /save prompt. Still don't know what was actually wrong,
1643 but it behaves correctly now. :-I
1644
1645 Away messages are only displayed ONCE.
1646
1647 Added #ifdef into new_free() to hunt for free's that should not take place.
1648 If you have spare time hunt some of those.. ;)
1649
1650 Added the commands '<text> and :<text> which only work in COMMAND_MODE and
1651 act like /send and /me respectively. This is a MUD standard.
1652
1653 Added /restart, /xtra and /host which calls USERHOST. The last two have no
1654 /help files.
1655
1656 Introduced Allanon's implementation of ZCAT help file display.
1657 Also scripts (files for /load) can be stored in compressed format if one likes.
1658
1659 Patched /save to work with totally dumb terminals, with -d it saves without prompting.
1660
1661 Added special sequence '$D' to the alias parser. Thanks to The_Edge for the idea.
1662 Added binding ESC-G to the 'commander' script that uses it.
1663
1664 Applied Veggen's patch to alias.c concerning uninitialized variables.
1665
1666 Removed /set VERBOSE_QUERY since the same can be achieved with /^query...
1667 (If you want it use /alias quer ^query)
1668
1669 Added DCC SENDCRC and GETCRC by Allanon. These functions transmit and receive
1670 files with checksum. It has to be tested and decided if a checksum is needed
1671 or futile by TCP definition. The commands are temporary and should replace
1672 the current SEND/GET or be removed away again. Since this decision affects
1673 other client coders, too, it should be discussed via USENET or interactively.
1674
1675 Added ';' handling: In ALIASes, ONs and BINDs it is legal to use ; as command
1676 seperator instead of \\n while in LOAD and interactive mode ';' is considered a
1677 normal character (to be able to type ;-) ). With a little magic I managed to make
1678 it possible to escape the ; with \; in aliases if you want it as character. *PHEW*
1679
1680 Repaired /whois 317 (idle time output).
1681 Added /whois <server> <nick>[,<nick2>..] format to /whois command.
1682
1683 Added commands /me and /describe to produce ACTION messages.
1684
1685 Added CTCP ACTION handling.
1686
1687 Disabled GLOBAL_IRCRC, replaced by automatic /load of 'global' which is
1688 supposed to be in the IRCPATH. This permits easier debugging and developing
1689 of scripts by redirecting everything into an other directory.
1690
1691 If a person has an .ircrc the person is assumed to not be a novice, the /HELP NEWUSER
1692 notice is not output.
1693
1694 Added variable QUIT_ON_KILL to select if one wants to /quit when
1695 one is killed. /ON KILL has not been implemented for obvious
1696 reasons of possible misuse.. :-(
1697
1698 Added #ifdef AUTO_RECONNECT to make ircII not auto-reconnecting.
1699
1700 Added CTCP TIME by Veggen.
1701
1702 Added 'signoff reason' to signoff message. Modified some messages concerning
1703 CTCP and NOTIFY for beauty or better elequence...
1704
1705 Added /send command which sends something to the current query or channel
1706 as if it were typed. Acts as replacement to bare text, since that is now
1707 interpreted as commands
1708
1709 Added /say command which does the same as '/ <text>'
1710 and /# (or # in script mode) command which is the same as /comment.
1711
1712 Introduced script (command) mode and COMMAND_MODE variable.
1713
1714 Removed some code that would never get used, as my optimizer told me.
1715
1716 Bug fixes concerning buffers, /if command with HP/UX, ...
1717 by Allanon and Veggen.
1718
1719 * 2.1.4c
1720 Some bug fixes, including the CTCP DCC bug and substitution
1721 of '\' in alias expansion.
1722
1723 Bug in SAVE with "-d" mode fixed.
1724
1725 * 2.1.4b
1726 Support for server version 2.7
1727
1728 * 2.1.4a
1729 Bug fixes.
1730
1731 * 2.1.4
1732 $N now substitutes correctly to the nick on the current server.
1733
1734 Bug with changing servers when on multiple channels fixed.
1735
1736 ISON based NOTIFY has been implemented. In addition, the
1737 code has been modified so that NOTIFY will cause much lower
1738 network loads.
1739
1740 /TOPIC can now change the topic of a # channel on a 2.6.2b
1741 or newer server. The new format for /TOPIC is:
1742 /TOPIC [<channel>] [<topic>]
1743
1744 Aliases and ASSIGNed variables can now include a dot
1745 ('.') in their names. When listing aliases and assigned
1746 variables, anthing after a dot in the variable name
1747 is suppressed, unless typed explicitly. If two variables
1748 have the same name after this, only the first occurence
1749 is printed. This allows a structure-like effect.
1750
1751 /ASSIGN A.A This is a
1752 *** Assign A.A added
1753 /ASSIGN A.B this is B
1754 *** Assign A.B added
1755 /ASSIGN A.C This is c
1756 *** Assign A.C added
1757 /ASSIGN A
1758 *** Assigns:
1759 *** A <Structure>
1760 /ASSIGN A.
1761 *** Assigns:
1762 *** A.A This is a
1763 *** A.B this is B
1764 *** A.C This is c
1765 /ALIAS A.A alias a
1766 *** Alias A.A added
1767 /ALIAS A.B alias b
1768 *** Alias A.B added
1769 /ALIAS A.C alias c
1770 *** Alias A.C added
1771 /ALIAS A
1772 *** Aliases:
1773 *** A <Structure>
1774 /ALIAS A.
1775 *** Aliases:
1776 *** A.A alias a
1777 *** A.B alias b
1778 *** A.C alias c
1779
1780 Note that structures are effectively in a different naming
1781 space to non structures. Thus, you can have a structure called
1782 'A' and a normal variable, also called 'A'.
1783
1784 Server notices are now displayed with the SNOTE level.
1785 Four additional lastlog levels, USERLOG1-USERLOG4, are
1786 reserved for users. These can be used by displaying text
1787 with the XECHO command.
1788
1789 Four new alias substitutions: $O substitutes to the value
1790 of STATUS_OPER if you are an operator, $P to '@' if you are
1791 a channel operator on the current channel, $M to the modes
1792 on the current channel, and $A to the current away message.
1793 * 2.1.3c
1794 A new DCC command, rename, changes the name of a file sent
1795 to you by somebody else. DCC file transfer should also accept
1796 the ~ now.
1797
1798 Some bug fixes.
1799 * 2.1.3b
1800 A new log level, OPNOTE, has been added. This level applies
1801 to notices sent to operators, such as KILL notices.
1802
1803 A new status line variable, %F, lists the hidden windows in
1804 which there has been activity since they were made hidden.
1805 An associated IRCII variable, STATUS_NOTIFY, sets the format
1806 for this to be displayed.
1807
1808 New ONs: CHANNEL_NICK and CHANNEL_SIGNOFF are executed once
1809 for each channel from which the user changes nick or signs off.
1810 If all the CHANNEL_NICK and CHANNEL_SIGNOFF hooks which are
1811 matched suppress output, then the default output and the NICKNAME
1812 and SIGNOFF hooks will be suppressed.
1813
1814 Various bug fixes.
1815 * 2.1.3a
1816 Various bug fixes.
1817 * 2.1.3
1818 Added support for the Tektronix XD88
1819
1820 Added DCC talk. To use this, /DCC TALK user@host. DCC talk
1821 will only send an announcement once, rather than an infinite
1822 number of times.
1823
1824 Fixed bug with functions which have no arguments. Added RINDEX
1825 function.
1826
1827 * 2.1.2.2
1828 New help files RULES and IMPORTANT included. You should
1829 read these before installing help and decide on a site
1830 by site basis if you wish to install them. If not, remove
1831 them from the help directory.
1832
1833 Hopefully fixed the WHOIS queue once and for all.
1834
1835 Fixed some bugs outstanding from 2.1 (HELP paging with
1836 HOLD_MODE ON, Core dumps after a WHOIS or WHOWAS if the
1837 WHOIS queue was empty, core dumps when the status line
1838 is an empty string)
1839
1840 * 2.1.2
1841 Added DCC file transfers (GET and SEND), and DCC CLOSE
1842
1843 Added new window command - NOTIFY. This toggles the
1844 notification status of the current window. A window with
1845 notification on causes a message to be printed in the
1846 current window if output to that window occurs while
1847 it is hidden.
1848
1849 Changed group message ([$#]*.domain) handling so that such
1850 messages are treated more like WALLs than MSGs. (Meaning
1851 that it beeps if you have WALLs set in BEEP_ON_MSG, not
1852 if you have MSGs set).
1853
1854 The type of the MAIL variable has been changed from BOOLEAN
1855 back to INTEGER. If set to 2, it will now display some of the
1856 headers from incoming mail. Setting it to 1 is the same as
1857 setting it to ON used to be.
1858
1859 /ON SERVER_NOTICE processes messages sent from the server
1860 as NOTICEs, including MOTDs and many server status messages.
1861 The easiest way to see what is trapped by this is to do a
1862 /ON ^SERVER_NOTICE * /echo [SNOTICE] $* and see what happens.
1863
1864 /WHO -FILE performs a /WHO, displaying only those nnicks
1865 contained in the named file. This allows a larger list to
1866 be kept of people you know on IRC but not well enough to
1867 put them in the NOTIFY list.
1868
1869 If a channel name exceeds the channel name width in the output
1870 of /NAMES or /WHO, the last character that would be displayed
1871 is shown as a '>'.
1872
1873 Added NOVICE variable. Causes a new user message to be printed
1874 after .ircrc has been loaded if it is still set to ON, and
1875 refuses to allow any ON commands to be executed.
1876
1877 Added /ON RAW_IRC to deal with any unknown commands coming from
1878 the server. This is primarily of use to people working on server
1879 code, or people using servers with new commands which IRCII does
1880 not yet recognise.
1881
1882 Direct Client Connections implemented. /DCC CHAT opens a direct
1883 connection to another client. The user at the other end can either
1884 accept the chat with a /DCC chat or ignore it. Messages are sent
1885 across DCC CHAT connections with DMSG or DQUERY. A new status
1886 specifier, %D (STATUS_DQUERY) is supported, which substitutes
1887 the DQUERY value. Two more /ONs, DCC_CHAT and SEND_DCC_CHAT, deal
1888 with DMSG messages.
1889
1890 * 2.1.1
1891 Version 2.1.1 supports user defined functions. A user
1892 defined functions is an alias that ASSIGNs a value to
1893 FUNCTION_RETURN. Another alias can substitute the return
1894 value with $%FUNCTION(ARGUMENTS). See /HELP ALIAS FUNCTIONS
1895
1896 Pattern matching has been improved. IRCII now has an idea
1897 of the "best" match. This allows #* to be treated differently
1898 to * in /ON NAMES, for example.
1899
1900 IF and WHILE now only use unescaped operators. Thus if it
1901 is possible for a substitution in an if or while to produce
1902 an operator, such as a channel name containing !, it can
1903 be entered as $^!CHANNEL, escaping the ! and making IF
1904 and WHILE work as expected.
1905
1906 Support has been added for privileged ports. If IRCII is
1907 installed setuid->root it will attempt to bind the local
1908 socket to a privileged port, allowing some servers to
1909 verify connecting users on this basis. The PP_OBJS and
1910 PP_DEFS macros in Makefile must be uncommented.