| 1 |
# Sample configuration file for Debian's ipband package. |
| 2 |
# Simple version. |
| 3 |
|
| 4 |
# The "fork" directive tells ipband to avoid forking into the background. |
| 5 |
# Since our init script does this, we say "no". |
| 6 |
fork no |
| 7 |
|
| 8 |
# The "interface" directive tells ipband which adapter to monitor. |
| 9 |
interface eth0 |
| 10 |
|
| 11 |
# Make sure the device is put into promiscuous mode. |
| 12 |
promisc yes |
| 13 |
|
| 14 |
# The "bandwidth" directive is the default amount of bandwidth a subnet |
| 15 |
# must exceed before being reported. The unit is kilobytes per second. |
| 16 |
# It can be modified on a per-subnet basis, see below. |
| 17 |
bandwidth 600 |
| 18 |
|
| 19 |
# The "average" directive specifies how often we should average the used |
| 20 |
# bandwidth. The value is in seconds. |
| 21 |
average 60 |
| 22 |
|
| 23 |
# The "report" directive determines how long time a subnet must exceed the |
| 24 |
# bandwidth limit before being reported. The value is in seconds. |
| 25 |
# Default: five minutes. |
| 26 |
report 300 |
| 27 |
|
| 28 |
# The "top" setting is used in the report. At most this number of connec- |
| 29 |
# tions are included in the report, ordered according to bandwidth usage in |
| 30 |
# falling relative order. |
| 31 |
top 15 |
| 32 |
|
| 33 |
# Email-address we report to. |
| 34 |
mailto root@localhost |
| 35 |
|
| 36 |
# Do not collect reports in files by default, instead preferring mail |
| 37 |
# message reporting. Be sure to change these settings to sensible loca- |
| 38 |
# tions in the contrary case. Beware that the default file 'ipband.txt' |
| 39 |
# is probably dropped below '/' in the absence of this blocker. |
| 40 |
outfile /dev/null |
| 41 |
|
| 42 |
# To be active, HTML output needs an explicitly set location. |
| 43 |
## htmlfile /var/www/html/ipband/ipband.html |
| 44 |
|
| 45 |
# Number of significant bits in the hostmask. The default is "24", which |
| 46 |
# means for a subnet like "192.168.0.0", that all hosts from 192.168.0.0 |
| 47 |
# to 192.168.0.255 will be monitored. |
| 48 |
maskbits 24 |
| 49 |
|
| 50 |
# Subnet declarations: Here we describe what networks and hosts we wish to |
| 51 |
# monitor. In this example, we have two networks. One is 10.0.0.1, which |
| 52 |
# is part of a low-bandwidth WAN, and then 192.168.0.0, which is a local |
| 53 |
# 10 Mbps LAN. The default 600 kB/s limit for the LAN is chosen since it |
| 54 |
# is a fast network. A bandwidth of 60 kB/s is set for the WAN, since it |
| 55 |
# is imagined as slow, and we care more about who is using what bandwidth. |
| 56 |
subnet 192.168.0.0 bandwidth 600 |
| 57 |
subnet 10.0.0.1 bandwidth 60 |