Debian Codegraph @

src/shaders/post_processing/gen8/Set_AVS_Buf_0123_PL2.g8a

raw
1 /*
2 * Copyright 2000-2011 Intel Corporation All Rights Reserved
3 *
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
7 *
8 * http://www.apache.org/licenses/LICENSE-2.0
9 *
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
15 */
16 // 7 // Total instruction count
17 // 1 // Total kernel count
18
19
20
21 // Module name: common.inc
22 //
23 // Common header file for all Video-Processing kernels
24 //
25
26 .default_execution_size (16)
27 .default_register_type :ub
28
29 .reg_count_total 128
30 .reg_count_payload 7
31
32 //========== Common constants ==========
33
34
35 //========== Macros ==========
36
37
38 //Fast Jump, For more details see "Set_Layer_N.asm"
39
40
41 //========== Defines ====================
42
43 //========== Static Parameters (Common To All) ==========
44 //r1
45
46
47 //r2
48
49 // e.g. byte0 byte1 byte2
50 // YUYV 0 1 3
51 // YVYU 0 3 1
52
53 //Color Pipe (IECP) parameters
54
55
56 //ByteCopy
57
58
59 //r4
60
61 // e.g. byte0 byte1 byte2
62 // YUYV 0 1 3
63 // YVYU 0 3 1
64
65
66 //========== Inline parameters (Common To All) ===========
67
68
69 //============== Binding Index Table===========
70 //Common between DNDI and DNUV
71
72
73 //================= Common Message Descriptor =====
74 // Message descriptor for thread spawning
75 // Message Descriptors
76 // = 000 0001 (min message len 1 ) 0,0000 (resp len 0 -add later)
77 // 0000,0000,0000
78 // 0001(Spawn a root thread),0001 (Root thread spawn thread)
79 // = 0x02000011
80 // Thread Spawner Message Descriptor
81
82
83 // Message descriptor for atomic operation add
84 // Message Descriptors
85 // = 000 0110 (min message len 6 ) 0,0000 (resp len 0 -add later)
86 // 1(header present)001,10(typed atomic operation)0(return enabled)0(slot group, low 8 bits),0111 (AOP_Add)
87 // 0000,0000 (Binding table index, added later)
88 // = 0x02000011
89
90 // Atomic Operation Add Message Descriptor
91
92
93 // Message descriptor for dataport media write
94 // Message Descriptors
95 // = 000 0001 (min message len 1 - add later) 00000 (resp len 0)
96 // 1 (header present 1) 0 1010 (media block write) 000000
97 // 00000000 (binding table index - set later)
98 // = 0x020A8000
99
100
101 // Message Length defines
102
103
104 // Response Length defines
105
106
107 // Block Width and Height Size defines
108
109
110 // Extended Message Descriptors
111
112
113 // Common message descriptors:
114
115
116 //===================== Math Function Control ===================================
117
118
119 //============ Message Registers ===============
120 // buf4 starts from r28
121
122
123 //#define mMSGHDR_EOT r43 // Dummy Message Register for EOT
124
125
126 .declare mubMSGPAYLOAD Base=r30 ElementSize=1 SrcRegion=<16;16,1> Type=ub
127 .declare muwMSGPAYLOAD Base=r30 ElementSize=2 SrcRegion=<16;16,1> Type=uw
128 .declare mudMSGPAYLOAD Base=r30 ElementSize=4 SrcRegion=<8;8,1> Type=ud
129 .declare mfMSGPAYLOAD Base=r30 ElementSize=4 SrcRegion=<8;8,1> Type=f
130
131 //=================== End of thread instruction ===========================
132
133
134 //=====================Pointers Used=====================================
135
136
137 //=======================================================================
138
139
140 //r11-r17
141 // Define temp space for any usages
142
143
144 // Common Buffers
145
146
147 // temp space for rotation
148
149 .declare fROBUF Base=r11.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f
150
151 .declare udROBUF Base=r11.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud
152
153 .declare uwROBUF Base=r11.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw
154
155 .declare ubROBUF Base=r11.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub
156
157 .declare ub4ROBUF Base=r11.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub
158
159
160 // End of common.inc
161
162
163 //Module Name: Set_AVS_Buf_0123_PL2.asm
164
165
166
167 //Module Name: Set_Buf_0123_PL2
168
169
170
171
172 // Description: Includes all definitions explicit to Fast Composite.
173
174
175
176
177 // End of common.inc
178
179
180 //========== GRF partition ==========
181 // r0 header : r0 (1 GRF)
182 // Static parameters : r1 - r6 (6 GRFS)
183 // Inline parameters : r7 - r8 (2 GRFs)
184 // MSGSRC : r27 (1 GRF)
185 //===================================
186
187 //Interface:
188 //========== Static Parameters (Explicit To Fast Composite) ==========
189 //r1
190 //CSC Set 0
191
192
193 .declare udCSC_CURBE Base=r1.0 ElementSize=4 Type=ud
194
195 //Constant alpha
196
197
198 //r2
199
200
201 // Gen7 AVS WA
202
203
204 // WiDi Definitions
205
206
207 //Colorfill
208
209
210 // 0: 0-degree, 1: 90, 2: 180, 3: 270-degree, clockwise.
211
212 .declare ubCOLOR_PIXEL_VAL Base=r2.20 ElementSize=1 SrcRegion=<0;1,0> DstRegion=<1> Type=ub
213
214 //r3
215 //Normalised Ratio of Horizontal step size with main video for all layers
216
217
218 //Normalised Ratio of Horizontal step size with main video for all layers becomes
219 //Normalised Horizontal step size for all layers in VP_Setup.asm
220
221
222 //r4
223 //Normalised Vertical step size for all layers
224
225
226 //r5
227 //Normalised Vertical Frame Origin for all layers
228
229
230 //r6
231 //Normalised Horizontal Frame Origin for all layers
232
233
234 //========== Inline Parameters (Explicit To Fast Composite) ==========
235
236
237 //Main video Step X
238
239
240 //====================== Binding table (Explicit To Fast Composite)=========================================
241
242
243 //Used by Interlaced Scaling Kernels
244
245
246 //========== Sampler State Table Index (Explicit To Fast Composite)==========
247 //Sampler Index for AVS/IEF messages
248
249
250 //Sampler Index for SIMD16 sampler messages
251
252
253 //=============================================================================
254
255 .declare fBUFFER_0 Base=r64.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f
256 .declare fBUFFER_1 Base=r80.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f
257 .declare fBUFFER_2 Base=r96.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f
258 .declare fBUFFER_3 Base=r112.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f
259 .declare fBUFFER_4 Base=r28.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f
260 .declare fBUFFER_5 Base=r46.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f
261
262 .declare udBUFFER_0 Base=r64.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud
263 .declare udBUFFER_1 Base=r80.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud
264 .declare udBUFFER_2 Base=r96.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud
265 .declare udBUFFER_3 Base=r112.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud
266 .declare udBUFFER_4 Base=r28.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud
267 .declare udBUFFER_5 Base=r46.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud
268
269 .declare uwBUFFER_0 Base=r64.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw
270 .declare uwBUFFER_1 Base=r80.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw
271 .declare uwBUFFER_2 Base=r96.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw
272 .declare uwBUFFER_3 Base=r112.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw
273 .declare uwBUFFER_4 Base=r28.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw
274 .declare uwBUFFER_5 Base=r46.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw
275
276 .declare ubBUFFER_0 Base=r64.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub
277 .declare ubBUFFER_1 Base=r80.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub
278 .declare ubBUFFER_2 Base=r96.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub
279 .declare ubBUFFER_3 Base=r112.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub
280 .declare ubBUFFER_4 Base=r28.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub
281 .declare ubBUFFER_5 Base=r46.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub
282
283 .declare ub4BUFFER_0 Base=r64.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub
284 .declare ub4BUFFER_1 Base=r80.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub
285 .declare ub4BUFFER_2 Base=r96.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub
286 .declare ub4BUFFER_3 Base=r112.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub
287 .declare ub4BUFFER_4 Base=r28.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub
288 .declare ub4BUFFER_5 Base=r46.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub
289
290 //Pointer to mask reg
291
292
293 //r18
294
295
296 //Always keep Cannel Pointers and Offsets in same GRF, so that we can use
297 // NODDCLR, NODDCHK flags. -rT
298
299
300 .declare udCSC_COEFF_0 Base=r18.0 ElementSize=4 Type=ud // 1 GRF
301
302 //r19
303
304
305 .declare udCSC_COEFF_1 Base=r19.0 ElementSize=4 Type=ud // 1 GRF
306
307
308 //r20
309
310 .declare uwALPHA_MASK_REG_TEMP Base=r20.0 ElementSize=2 SrcRegion=<16;16,1> Type=uw // 1 GRF
311
312 //r21
313
314 .declare uwALPHA_MASK_REG Base=r21.0 ElementSize=2 SrcRegion=<16;16,1> Type=uw // 1 GRF
315
316 //r22
317
318
319 //Always keep Cannel Pointers and Offsets in same GRF, so that we can use
320 // NODDCLR, NODDCHK flags. -rT
321
322
323 //Keep fORIGIN_X_NLAS, fY_OFFSET_2ND_BLOCK, fSTEP_X_NLAS, pMSGDSC_COPY, ubCONST_ALPHA_COPY as
324 //sub registers of same GRF to enable using NODDCLR NODDCHK. -rT
325
326 //r23
327
328
329 //Lumakey
330
331
332 //r24
333
334
335 //r25
336
337
338 //r26
339
340
341 //defines to generate LABELS during compile time.
342
343
344 //AVS LAYOUT: (YYUUVVAA)
345 //Assign buffer channel order for Buffer 0123 in the order AUYV a0.3>A, a0.2>U, a0.1>Y, a0.0>V
346 //For PL2-AVS: V = 8, Y= 0, U = 4, A = 12.
347 mov (4) r22.0<1>:w 0x6EA2:v //Subtract 6 from 0,4,8,12
348 add (4) r22.0<1>:w r22.0<4;4,1>:w 70:uw //add 6 back
349 shl (4) r22.0<1>:w r22.0<4;4,1>:w 5:uw //Convert to BYTE address.
350
351 //OPT: wAVS_SU_SHUFFLE_PTR_0 and udAVS_SU_SHUFFLE_OFF_0 are sub-regs of same GRF. -rT
352 //SU LAYOUT:(YUVAYUVA)
353 //V = 4, Y = 0, U = 2, A = 6
354 mov (4) r18.0<1>:w 0x6204:v
355 add (4) r18.0<1>:w r18.0<4;4,1>:w 64:uw
356 shl (4) r18.0<1>:w r18.0<4;4,1>:w 5:uw { NoDDClr } //Convert to BYTE address.
357
358 //OFFSET:
359 mov (1) r18.4<1>:ud 0x1000100:ud { NoDDChk }
360
361