Debian Codegraph @

src/shaders/post_processing/gen7/NV12_DN_NV12.g4a

raw
1 /*
2 * Copyright 2000-2011 Intel Corporation All Rights Reserved
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the
6 * "Software"), to deal in the Software without restriction, including
7 * without limitation the rights to use, copy, modify, merge, publish,
8 * distribute, sub license, and/or sell copies of the Software, and to
9 * permit persons to whom the Software is furnished to do so, subject to
10 * the following conditions:
11 *
12 * The above copyright notice and this permission notice (including the
13 * next paragraph) shall be included in all copies or substantial portions
14 * of the Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
17 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
18 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
19 * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR
20 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
21 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
22 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
23 *
24 * This file was originally licensed under the following license
25 *
26 * Licensed under the Apache License, Version 2.0 (the "License");
27 * you may not use this file except in compliance with the License.
28 * You may obtain a copy of the License at
29 *
30 * http://www.apache.org/licenses/LICENSE-2.0
31 *
32 * Unless required by applicable law or agreed to in writing, software
33 * distributed under the License is distributed on an "AS IS" BASIS,
34 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
35 * See the License for the specific language governing permissions and
36 * limitations under the License.
37 */
38 // 40 // Total instruction count
39 // 1 // Total kernel count
40
41 .kernel NV12_DN_NV12
42 .code
43
44
45
46 // FileName: DN_PL_Core.asm
47 // Author: Vivek Kumar
48 // Description: Tasks for DN only case (16x8 block) for planar format
49
50
51
52 // FileName: DN.asm
53 // Author: Vivek Kumar
54 // Description: Tasks for DN only case (16x8 block)
55
56
57
58
59 // Module name: common.inc
60 //
61 // Common header file for all Video-Processing kernels
62 //
63
64 .default_execution_size (16)
65 .default_register_type :ub
66
67 .reg_count_total 128
68 .reg_count_payload 7
69
70 //========== Common constants ==========
71
72
73 //========== Macros ==========
74
75
76 //Fast Jump, For more details see "Set_Layer_N.asm"
77
78
79 //========== Defines ====================
80
81 //========== Static Parameters (Common To All) ==========
82 //r1
83
84
85 //r2
86
87 // e.g. byte0 byte1 byte2
88 // YUYV 0 1 3
89 // YVYU 0 3 1
90
91 //Color Pipe (IECP) parameters
92
93
94 //ByteCopy
95
96
97 //r4
98
99 // e.g. byte0 byte1 byte2
100 // YUYV 0 1 3
101 // YVYU 0 3 1
102
103
104 //========== Inline parameters (Common To All) ===========
105
106
107 //============== Binding Index Table===========
108 //Common between DNDI and DNUV
109
110
111 //================= Common Message Descriptor =====
112 // Message descriptor for thread spawning
113 // Message Descriptors
114 // = 000 0001 (min message len 1 ) 0,0000 (resp len 0 -add later)
115 // 0000,0000,0000
116 // 0001(Spawn a root thread),0001 (Root thread spawn thread)
117 // = 0x02000011
118 // Thread Spawner Message Descriptor
119
120
121 // Message descriptor for atomic operation add
122 // Message Descriptors
123 // = 000 0110 (min message len 6 ) 0,0000 (resp len 0 -add later)
124 // 1(header present)001,10(typed atomic operation)0(return enabled)0(slot group, low 8 bits),0111 (AOP_Add)
125 // 0000,0000 (Binding table index, added later)
126 // = 0x02000011
127
128 // Atomic Operation Add Message Descriptor
129
130
131 // Message descriptor for dataport media write
132 // Message Descriptors
133 // = 000 0001 (min message len 1 - add later) 00000 (resp len 0)
134 // 1 (header present 1) 0 1010 (media block write) 000000
135 // 00000000 (binding table index - set later)
136 // = 0x020A8000
137
138
139 // Message Length defines
140
141
142 // Response Length defines
143
144
145 // Block Width and Height Size defines
146
147
148 // Extended Message Descriptors
149
150
151 // Common message descriptors:
152
153
154 //===================== Math Function Control ===================================
155
156
157 //============ Message Registers ===============
158 // buf4 starts from r28
159
160
161 //#define mMSGHDR_EOT r43 // Dummy Message Register for EOT
162
163
164 .declare mubMSGPAYLOAD Base=r30 ElementSize=1 SrcRegion=<16;16,1> Type=ub
165 .declare muwMSGPAYLOAD Base=r30 ElementSize=2 SrcRegion=<16;16,1> Type=uw
166 .declare mudMSGPAYLOAD Base=r30 ElementSize=4 SrcRegion=<8;8,1> Type=ud
167 .declare mfMSGPAYLOAD Base=r30 ElementSize=4 SrcRegion=<8;8,1> Type=f
168
169 //=================== End of thread instruction ===========================
170
171
172 //=====================Pointers Used=====================================
173
174
175 //=======================================================================
176
177
178 //r11-r17
179 // Define temp space for any usages
180
181
182 // Common Buffers
183
184
185 // temp space for rotation
186
187 .declare fROBUF Base=r11.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f
188
189 .declare udROBUF Base=r11.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud
190
191 .declare uwROBUF Base=r11.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw
192
193 .declare ubROBUF Base=r11.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub
194
195 .declare ub4ROBUF Base=r11.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub
196
197
198 // End of common.inc
199
200
201 // FileName: DNDI.inc
202 // Author: Vivek Kumar
203 // Description: Include file for DN, DI and DNDI
204 // Inputs: DI_ENABLE, DN_ENABLE, DN_PLANAR, DN_PACKED
205
206
207
208
209 // End of common.inc
210
211
212 //Interface:
213 //Static Parameters:
214 //r1
215
216
217 //====================== Binding table (Explicit To DNDI)=========================================
218
219
220 .declare mudMSGHDR_DNDI Base=r18 ElementSize=4 Type=ud
221 .declare mdMSGHDR_DNDI Base=r18 ElementSize=4 Type=d
222 .declare mwMSGHDR_DNDI Base=r18 ElementSize=2 Type=w
223
224
225 .declare mudMSGHDR_STMM Base=r20 ElementSize=4 Type=ud
226
227
228 .declare mudMSGHDR_HIST Base=r22 ElementSize=4 Type=ud
229
230
231 .declare mudMSGHDR_ENC_STATS Base=r24 ElementSize=4 Type=ud
232 .declare muwMSGHDR_ENC_STATS Base=r24 ElementSize=2 Type=uw
233 .declare mubMSGHDR_ENC_STATS Base=r24 ElementSize=1 Type=ub
234
235
236 .declare mudMSGHDR_DN_OUT Base=r31.0 ElementSize=4 Type=ud
237 .declare mdMSGHDR_DN_OUT Base=r31.0 ElementSize=4 Type=d
238 .declare mubMSGHDR_DN_OUT Base=r31.0 ElementSize=1 Type=ub
239
240
241 .declare mudMSGHDR_UVCOPY Base=r36 ElementSize=4 Type=ud
242 .declare mdMSGHDR_UVCOPY Base=r36 ElementSize=4 Type=d
243 .declare mudMSGHDR_UCOPY Base=r36 ElementSize=4 Type=ud
244 .declare mudMSGHDR_VCOPY Base=r38 ElementSize=4 Type=ud
245
246
247 .declare mudMSGHDR_DI_OUT1 Base=r18.0 ElementSize=4 Type=ud
248 .declare mubMSGHDR_DI_OUT1 Base=r18.0 ElementSize=1 Type=ub
249
250
251 .declare mudMSGHDR_DI_OUT2 Base=r23.0 ElementSize=4 Type=ud
252 .declare mubMSGHDR_DI_OUT2 Base=r23.0 ElementSize=1 Type=ub
253
254 //r45
255 //Use r45 as message header, so no need to "mov" the data.
256
257 .declare mudDN_Y_OUT Base=r45.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud
258
259 // Message response (Denoised & DI-ed pixels & statistics); Use buffer 5
260 .declare udDNDI_RESP Base=r46.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud
261 .declare uwDNDI_RESP Base=r46.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw
262 .declare ubDNDI_RESP Base=r46.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub
263
264 // Message response (UV Copy); Use buffer 5
265 .declare udDNDI_UV_RESP Base=r58.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud
266 .declare ubDNDI_UV_RESP Base=r58.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub
267
268 //Temp GRFs: For 42X to 422 Conversion
269 .declare uwDNDI_UVCOPY_TEMP Base=r10.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw //8 GRFs
270 .declare ubDNDI_UVCOPY_TEMP Base=r10.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub //8 GRFs
271 //---------------------------------------------------------------------------
272 // Message descriptors
273 //---------------------------------------------------------------------------
274 // Extended message descriptor
275 // Message descriptor for sampler read
276 // = 000 0010 (message len 2) 00000 (resp len - set later, 12 or 5 or 11)
277 // 1 (header present 1) 0 11 (SIMD32/64 mode)
278 // 1000 (message type) 0000 (DI state index)
279 // 00000000 (binding table index - set later)
280 // = 0x040b8000
281
282
283 // Attention: The Message Length is The Number of GRFs with Data Only, without the Header
284
285
286 //---------------------------------------------------------------------------
287 // VDI Return Data format
288 //---------------------------------------------------------------------------
289 // Defines for DI enabled
290
291
292 // Defines for DI disabled
293
294
295
296 // FileName: DNDI_Command.asm
297 // Author: Vivek Kumar
298 // Description: Sends a message to the VDI to process one DN (16x8) or DNDI (16x4) block
299
300 // Prepare the DNDI send command
301 mov (8) mudMSGHDR_DNDI(0)<1> r0.0<8;8,1>:ud // message header
302 mov (1) mwMSGHDR_DNDI(1,4)<1> r9.0<0;1,0>:w { NoDDClr } // horizontal origin // Do we need to add offset here? -vK
303 mov (1) mwMSGHDR_DNDI(1,12)<1> r9.1<0;1,0>:w { NoDDChk } // vertical origin // Can these 2 be combined? - vK
304
305 send (8) udDNDI_RESP(0)<1> r18 0x2 0x45E8003:ud
306
307 // On Gen6, with VDI walker, use the XY pair returned rather than programmed above
308 // VDI_RETURNED_XY is ordered XY in case of walker enables and the same as programmed in case of walker disabled
309 mov (2) r9.0<1>:w uwDNDI_RESP(4,14)<2;2,1> // horizontal/Vertial origin in W.14 and W.15
310
311
312
313 // FileName: DN_Hist_Save.asm
314 // Author: Vivek Kumar
315 // Description: Saves DN history data to statistics surface
316
317 // Write denoise history to memory
318 mov (8) r27<1>:ud r0.0<8;8,1>:ud // message header
319
320
321 mov (2) mudMSGHDR_HIST(1)<1> udDNDI_RESP(4,0)<2;2,1> // Move denoise history to MRF (4x2)
322
323
324 shr (2) r27.0<1>:ud r9.0<2;2,1>:w 2:w // X,Y origin / 4
325 add (1) r27.0<1>:ud r27.0<0;1,0>:ud r1.12<0;1,0>:uw { NoDDClr } // Add pitch to X origin
326 mov (1) r27.2<1>:ud 0x10003:ud { NoDDChk } // block width and height
327
328 mov (8) mudMSGHDR_HIST(0)<1> r27.0<8;8,1>:ud
329 send (8) null<1>:d r22 0x5 0x40A8021:ud
330
331
332
333 // FileName: DNDI_Enc_Stats_Save.asm
334 // Author: Vivek Kumar
335 // Description: Saves Encoder Statistics data to statistics surface in case of DI enabled (for 16x4 block)
336
337 // Write encoder statistics to memory
338 //Currently enable this only on Gen6 validation
339 mov (8) mudMSGHDR_ENC_STATS(1)<1> 0x0:ud // Init payload MRF
340 mov (8) mudMSGHDR_ENC_STATS(0)<1> r0.0<8;8,1>:ud // message header
341
342 shr (1) mudMSGHDR_ENC_STATS(0,0)<1> r9.0<0;1,0>:w 1:w { NoDDClr } //enable the flag after testing on si { NoDDClr } // X origin / 2
343 mul (1) acc0.1<1>:ud r9.1<0;1,0>:w 3:w // Y origin * 3
344 shr (1) mudMSGHDR_ENC_STATS(0,1)<1> acc0.1<0;1,0>:ud 2:w { NoDDClr, NoDDChk } //enable the flag after testing on si { NoDDClr, NoDDChk } // Y origin * 3/4
345 mov (1) mudMSGHDR_ENC_STATS(0,2)<1> 0x50003:ud { NoDDChk } //enable the flag after testing on si { NoDDChk } // block width and height (8x3)
346 add (2) mudMSGHDR_ENC_STATS(0,0)<1> mudMSGHDR_ENC_STATS(0,0)<2;2,1> r1.12<2;2,1>:uw // Add pitch to X,Y origin
347
348
349 //Data block for Encoder Statistics
350 //----------------------------------------------------
351 //| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | Bytes
352 //----------------------------------------------------
353 //| BNE | X | X | X | X |
354 //----------------------------------------------------
355 //| X | SVCM | X |
356 //----------------------------------------------------
357 //| SHCM | STAD | X |
358 //----------------------------------------------------
359 //| X | X |
360 //----------------------------------------------------
361 //| X | SVCM | X |
362 //----------------------------------------------------
363 //| SHCM | STAD | X |
364 //----------------------------------------------------
365 mov (1) mubMSGHDR_ENC_STATS(1,0)<1> ubDNDI_RESP(4,8)<0;1,0> { NoDDClr } // Move encoder statistics to MRF
366 mov (1) muwMSGHDR_ENC_STATS(1,3)<1> uwDNDI_RESP(4,11)<0;1,0> { NoDDClr, NoDDChk } // Move encoder statistics to MRF
367 mov (2) muwMSGHDR_ENC_STATS(1,4)<1> uwDNDI_RESP(4,12)<2;2,1> { NoDDClr, NoDDChk } // Move encoder statistics to MRF
368 mov (1) muwMSGHDR_ENC_STATS(1,9)<1> uwDNDI_RESP(4,8)<0;1,0> { NoDDClr, NoDDChk } // Move encoder statistics to MRF
369 mov (2) muwMSGHDR_ENC_STATS(1,10)<1> uwDNDI_RESP(4,9)<2;2,1> { NoDDChk } // Move encoder statistics to MRF
370
371
372 send (8) null<1>:d r24 0x5 0x40A8021:ud
373
374
375
376 // FileName: DN_Load_UV_NV12_16x8.asm
377 // Author: Vivek Kumar
378 // Description: Read UV for 16x8 block through DATAPORT
379
380
381
382 // FileName: UVCopy_Load_16x8.asm
383 // Author: Vivek Kumar
384 // Description: Read UV for 16x8 block through DATAPORT
385
386 //CHANGE : Read extra UV data to convert to 422. -rT
387 //we are reading extra data in ALL cases irrespective of whether upsampling is reqd or not later on, to keep things simple.
388
389
390 add (2) r27.0<1>:d r9.0<2;2,1>:w r4.4<2;2,1>:w // Source Y Block origin
391 asr (1) r27.1<1>:d r27.1<0;1,0>:d 1:w { NoDDClr } // U/V block origin should be half of Y's
392 mov (1) r27.2<1>:ud 0x4000F:ud { NoDDChk } // U/V block width and height (8x5)
393 mov (8) mudMSGHDR_UVCOPY(0)<1> r27.0<8;8,1>:ud
394 send (8) udDNDI_UV_RESP(0)<1> r36 0x4 0x2390001:ud
395
396 //Update Header for Save
397 mov (1) mudMSGHDR_UVCOPY(0,2)<1> 0x3000F:ud // U/V block width and height (8x4)
398
399
400
401 // FileName: DN_Save_Y_16x8.asm
402 // Author: Vivek Kumar
403 // Description: Save one 16x8 blocks of Y channel of DN output for reference
404
405
406 mov (8) mudDN_Y_OUT(0,0)<1> r0<8;8,1>:ud // message header
407 mov (2) mudDN_Y_OUT(0,0)<1> r9.0<2;2,1>:w { NoDDClr } // X origin
408 mov (1) mudDN_Y_OUT(0,2)<1> 0x7000F:ud { NoDDChk } // block width and height (16x8)
409
410 //send out data through data port
411 send (8) null<1>:d mudDN_Y_OUT 0x5 0xA0A8018:ud
412
413
414
415 // FileName: DN_Save_UV_NV12_16x8.asm
416 // Author: Vivek Kumar
417 // Description: Save UV for 16x8 block through DATAPORT
418
419
420
421 // FileName: UVCopy_Save_16x8.asm
422 // Author: Vivek Kumar
423 // Description: Save UV for 16x8 block through DATAPORT
424
425
426 //Reuse the header from Load component
427 //Header is modified at the end of load - to be usable for save.
428
429 mov (8) mudMSGHDR_UVCOPY(1)<1> udDNDI_UV_RESP(0)<8;8,1>
430 mov (8) mudMSGHDR_UVCOPY(2)<1> udDNDI_UV_RESP(1)<8;8,1>
431 send (8) null<1>:d r36 0x5 0x60A8019:ud
432
433
434
435 //End of Thread message
436
437 mov (8) r127<1>:ud r0.0<8;8,1>:ud
438 send (1) null<1>:d r127 0x27 0x02000010
439
440
441 .end_code
442 .end_kernel