Debian Codegraph @

README

raw
1
2 This is a small collection of input layer utilities. I wrote them
3 mainly for testing and debugging, but maybe others find them useful
4 too :-)
5
6
7 lsinput
8 =======
9
10 probe and list all devices
11
12
13 input-event
14 ===========
15
16 listen for events and print them. Expects a device number as argument
17 (0 == /dev/input/event0, ...).
18
19 -t <sec> set timeout, quits after <sec> seconds without input.
20 default is 10
21 -g grab device using EVIOCGRAB, i.e. get exclusive access to
22 the device
23
24
25 input-kbd
26 =========
27
28 read/write keyboard maps (scancode => linux keycode). Also expects a
29 device number as argument.
30
31 If the input device supports maps, it will print them to stdout.
32 Looks like this (AT Keyboard):
33
34 0x0001 = 67 # KEY_F9
35 0x0002 = 65 # KEY_F7
36 0x0003 = 63 # KEY_F5
37 0x0004 = 61 # KEY_F3
38 [ ... ]
39
40 If the device doesn't support maps the utility just prints the keys
41 and/or buttons supported by the device (my mouse):
42
43 bits: BTN_LEFT
44 bits: BTN_RIGHT
45 bits: BTN_MIDDLE
46
47 If you pass a map file via -f switch the utility will parse it and
48 reconfigure the device. Syntax is identical to the maps printed out,
49 i.e. you can dump the current map to some file, edit it and then apply
50 the changes. The key names are also accepted, i.e. both this ...
51
52 0x0001 = 67
53
54 ... and this ...
55
56 0x0001 = KEY_F9
57
58 ... works.
59
60
61 input-send
62 ==========
63
64 small daemon which reads from a input device and sends it over the
65 network to everyone who connects. Listens on tcp port 1234.
66
67
68 input-recv
69 ==========
70
71 the receiving end for the send utility. Connects to localhost:1234
72 right now and prints stuff to stderr. Plan is to put events into
73 /dev/input/uinput some day which basically gives you a remote input
74 device.
75
76
77 Have fun,
78
79 Gerd
80
81 --
82 Gerd Hoffmann <[email protected]>