Debian Codegraph @

sample-configs/config.data-uxpds

raw
1 ## Sample config.data for UXPDS
2
3 ##
4 ## 1. MAKE CONFIG PARAMETERS
5 ## Where the DBZ sources are, from C News. INN has a (maybe old) copy.
6 #### =()<DBZDIR @<DBZDIR>@>()=
7 DBZDIR ../dbz
8 ## If you have a parallel make, set this to "&"
9 #### =()<P @<P>@>()=
10 P
11 ## C pre-processor flags
12 #### =()<DEFS @<DEFS>@>()=
13 DEFS -I../include
14 ## C compiler
15 #### =()<CC @<CC>@>()=
16 CC /usr/ccs/bin/cc
17 ## Does your compiler properly do "char const *"? Pick DO DONT or DUNNO
18 #### =()<USE_CHAR_CONST @<USE_CHAR_CONST>@>()=
19 USE_CHAR_CONST DO
20 ## C compiler flags
21 #### =()<CFLAGS @<CFLAGS>@>()=
22 CFLAGS $(DEFS) -O
23 ## C compiler flags to use when compiling dbz
24 #### =()<DBZCFLAGS @<DBZCFLAGS>@>()=
25 DBZCFLAGS $(CFLAGS)
26 ## What flags to use if profiling; -p or -pg, e.g.
27 #### =()<PROF @<PROF>@>()=
28 PROF -p
29 ## Flags for the "cc -o" line; e.g., -Bstatic on SunOS4.x while debugging.
30 #### =()<LDFLAGS @<LDFLAGS>@>()=
31 LDFLAGS -g
32 ## If you use the standard NNTP way of connecting, where is the library?
33 #### =()<NNTPLIB @<NNTPLIB>@>()=
34 NNTPLIB
35 ## If you need to link in other libraries, add them here.
36 ## On NetBSD and FreeBSD, you must add the -lcrypt directive here
37 ## -lutil on BSD/OS gives you setproctitle() see HAVE_SETPROCTITLE.
38 #### =()<LIBS @<LIBS>@>()=
39 LIBS -lnsl -lsocket -lelf
40 ## How to make a lint library; pick BSD, SYSV, or NONE.
41 #### =()<LINTLIBSTYLE @<LINTLIBSTYLE>@>()=
42 LINTLIBSTYLE SYSV
43 ## Flags for lint. AIX wants "-wkD"; it and others don't want "-z".
44 #### =()<LINTFLAGS @<LINTFLAGS>@>()=
45 LINTFLAGS -b -h $(DEFS)
46 ## Some lints insist on putting out the filename and other crap.
47 ## Possible values:
48 ## LINTFILTER | sed -n -f ../sedf.aix
49 ## LINTFILTER | sed -n -f ../sedf.osx
50 ## LINTFILTER | sed -n -f ../sedf.sun
51 ## LINTFILTER | sed -n -f ../sedf.sysv
52 ## LINTFILTER
53 #### =()<LINTFILTER @<LINTFILTER>@>()=
54 LINTFILTER | sed -n -f ../sedf.sysv
55 ## How to install manpages; pick SOURCE, NROFF-PACK, NROFF-PACK-SCO,
56 ## BSD4.4 or NONE.
57 #### =()<MANPAGESTYLE @<MANPAGESTYLE>@>()=
58 MANPAGESTYLE SOURCE
59 ## Where various manpages should go
60 #### =()<MAN1 @<MAN1>@>()=
61 MAN1 /usr/news/man/man1
62 #### =()<MAN3 @<MAN3>@>()=
63 MAN3 /usr/news/man/man3
64 #### =()<MAN5 @<MAN5>@>()=
65 MAN5 /usr/news/man/man5
66 #### =()<MAN8 @<MAN8>@>()=
67 MAN8 /usr/news/man/man8
68 ## Ranlib command. Use echo if you don't need ranlib.
69 #### =()<RANLIB @<RANLIB>@>()=
70 RANLIB echo
71 ## YACC (yet another config control?)
72 #### =()<YACC @<YACC>@>()=
73 YACC yacc
74 ## Ctags command. Use echo if you don't have ctags.
75 #### =()<CTAGS @<CTAGS>@>()=
76 CTAGS ctags -t -w
77
78
79 ##
80 ## 2. LOGGING LEVELS
81 ## Facility innd should log under.
82 #### =()<LOG_INN_SERVER @<LOG_INN_SERVER>@>()=
83 LOG_INN_SERVER LOG_NEWS
84 ## Facility all other programs should log under.
85 #### =()<LOG_INN_PROG @<LOG_INN_PROG>@>()=
86 LOG_INN_PROG LOG_NEWS
87 ## Flags to use in opening the logs; some programs add LOG_PID.
88 #### =()<L_OPENLOG_FLAGS @<L_OPENLOG_FLAGS>@>()=
89 L_OPENLOG_FLAGS (LOG_CONS | LOG_NDELAY)
90 ## Log a fatal error; program is about to exit.
91 #### =()<L_FATAL @<L_FATAL>@>()=
92 L_FATAL LOG_CRIT
93 ## Log an error that might mean one or more articles get lost.
94 #### =()<L_ERROR @<L_ERROR>@>()=
95 L_ERROR LOG_ERR
96 ## Informational notice, usually not worth caring about.
97 #### =()<L_NOTICE @<L_NOTICE>@>()=
98 L_NOTICE LOG_WARNING
99 ## A protocol trace.
100 #### =()<L_TRACE @<L_TRACE>@>()=
101 L_TRACE LOG_DEBUG
102 ## All incoming control commands (ctlinnd, etc).
103 #### =()<L_CC_CMD @<L_CC_CMD>@>()=
104 L_CC_CMD LOG_INFO
105
106
107 ##
108 ## 3. OWNERSHIPS AND FILE MODES
109 ## Owner of articles and directories and _PATH_INNDDIR
110 #### =()<NEWSUSER @<NEWSUSER>@>()=
111 NEWSUSER news
112 ## Group, for same purpose
113 #### =()<NEWSGROUP @<NEWSGROUP>@>()=
114 NEWSGROUP news
115 ## Who gets email from news.daily and about control messages.
116 #### =()<NEWSMASTER @<NEWSMASTER>@>()=
117 NEWSMASTER usenet
118 ## Who gets email on the Path line?
119 #### =()<PATHMASTER @<PATHMASTER>@>()=
120 PATHMASTER not-for-mail
121 ## Umask to set.
122 #### =()<NEWSUMASK @<NEWSUMASK>@>()=
123 NEWSUMASK 02
124 ## Mode that incoming articles are created under.
125 #### =()<ARTFILE_MODE @<ARTFILE_MODE>@>()=
126 ARTFILE_MODE 0664
127 ## Mode that batch files are created under.
128 #### =()<BATCHFILE_MODE @<BATCHFILE_MODE>@>()=
129 BATCHFILE_MODE 0664
130 ## Mode that directories are created under.
131 #### =()<GROUPDIR_MODE @<GROUPDIR_MODE>@>()=
132 GROUPDIR_MODE 0775
133
134
135 ##
136 ## 4. C LIBRARY DIFFERENCES
137 ## Use stdargs, varargs, or neither? Pick VARARGS STDARGS or NONE.
138 ## You need vfprintf and vfsprintf if not NONE.
139 #### =()<VAR_STYLE @<VAR_STYLE>@>()=
140 VAR_STYLE STDARGS
141 ## If you don't have <string.h>, set this to "mystring.h"
142 #### =()<STR_HEADER @<STR_HEADER>@>()=
143 STR_HEADER <string.h>
144 ## If you don't have <memory.h>, set this to "mymemory.h"
145 #### =()<MEM_HEADER @<MEM_HEADER>@>()=
146 MEM_HEADER <memory.h>
147 ## What is a file offset? MUST BE LONG FOR NOW.
148 #### =()<OFFSET_T @<OFFSET_T>@>()=
149 OFFSET_T long
150 ## What is the type of an object size? Usually size_t or unsigned int.
151 #### =()<SIZE_T @<SIZE_T>@>()=
152 SIZE_T size_t
153 ## What is the type of a passwd uid and gid, for use in chown(2)?
154 #### =()<UID_T @<UID_T>@>()=
155 UID_T uid_t
156 #### =()<GID_T @<GID_T>@>()=
157 GID_T gid_t
158 ## Type of a pid, for use in kill(2).
159 #### =()<PID_T @<PID_T>@>()=
160 PID_T pid_t
161 ## Generic pointer, used by memcpy, malloc, etc. Usually char or void.
162 #### =()<POINTER @<POINTER>@>()=
163 POINTER void
164 ## Worst-case alignment, in order to shut lint up
165 #### =()<ALIGNPTR @<ALIGNPTR>@>()=
166 ALIGNPTR int
167 ## What should a signal handler return? Usually int or void.
168 #### =()<SIGHANDLER @<SIGHANDLER>@>()=
169 SIGHANDLER void
170 ## Type of variables can be modified in a signal handler? sig_atomic_t
171 #### =()<SIGVAR @<SIGVAR>@>()=
172 SIGVAR int
173 ## Function that returns no value, and a pointer to it. Pick int or void
174 #### =()<FUNCTYPE @<FUNCTYPE>@>()=
175 FUNCTYPE void
176 ## Type of 32 bit unsigned integer.
177 #### =()<U_INT32_T @<U_INT32_T>@>()=
178 U_INT32_T unsigned int
179 ## Type of 32 bit signed integer.
180 #### =()<INT32_T @<INT32_T>@>()=
181 INT32_T int
182 ## Use BSD4.2 or Posix directory names? Pick DIRENT or DIRECT.
183 #### =()<DIR_STYLE @<DIR_STYLE>@>()=
184 DIR_STYLE DIRENT
185 ## Use flock, lockf, or nothing to lock files?
186 ## Pick FLOCK, LOCKF, FCNTL, or NONE
187 #### =()<LOCK_STYLE @<LOCK_STYLE>@>()=
188 LOCK_STYLE LOCKF
189 ## Do you have <unistd.h>? Pick DO or DONT
190 #### =()<HAVE_UNISTD @<HAVE_UNISTD>@>()=
191 HAVE_UNISTD DO
192 ## Do you have setbuffer? Pick DO or DONT.
193 #### =()<HAVE_SETBUFFER @<HAVE_SETBUFFER>@>()=
194 HAVE_SETBUFFER DONT
195 ## Do you have gettimeofday? Pick DO or DONT.
196 #### =()<HAVE_GETTIMEOFDAY @<HAVE_GETTIMEOFDAY>@>()=
197 HAVE_GETTIMEOFDAY DO
198 ## Do you have setproctitle()? Pick DO or DONT.
199 ## You may need to adjust LIBS for this.
200 #### =()<HAVE_SETPROCTITLE @<HAVE_SETPROCTITLE>@>()=
201 HAVE_SETPROCTITLE DO
202 ## Do you have fchmod? Pick DO or DONT.
203 #### =()<HAVE_FCHMOD @<HAVE_FCHMOD>@>()=
204 HAVE_FCHMOD DO
205 ## Do you have setsid()? Pick DO or DONT.
206 #### =()<HAVE_SETSID @<HAVE_SETSID>@>()=
207 HAVE_SETSID DO
208 ## Does your (struct tm) have a tm_gmtoff field? Pick DO or DONT.
209 #### =()<HAVE_TM_GMTOFF @<HAVE_TM_GMTOFF>@>()=
210 HAVE_TM_GMTOFF DONT
211 ## Does your (struct stat) have a st_blksize field? Pick DO or DONT.
212 #### =()<HAVE_ST_BLKSIZE @<HAVE_ST_BLKSIZE>@>()=
213 HAVE_ST_BLKSIZE DO
214 ## Use waitpid instead of wait3? Pick DO or DONT.
215 #### =()<HAVE_WAITPID @<HAVE_WAITPID>@>()=
216 HAVE_WAITPID DO
217 ## Use "union wait" instead of int? Pick DO or DONT.
218 #### =()<USE_UNION_WAIT @<USE_UNION_WAIT>@>()=
219 USE_UNION_WAIT DONT
220 ## How to fork? Pick fork or vfork.
221 #### =()<FORK @<FORK>@>()=
222 FORK vfork
223 ## Do you have <vfork.h>? Pick DO or DONT.
224 #### =()<HAVE_VFORK @<HAVE_VFORK>@>()=
225 HAVE_VFORK DONT
226 ## Do you have symbolic links? Pick DO or DONT.
227 #### =()<HAVE_SYMLINK @<HAVE_SYMLINK>@>()=
228 HAVE_SYMLINK DO
229 ## Do you have Unix-domain sockets? Pick DO or DONT.
230 #### =()<HAVE_UNIX_DOMAIN @<HAVE_UNIX_DOMAIN>@>()=
231 HAVE_UNIX_DOMAIN DO
232 ## Does your AF_UNIX bind use sizeof for the socket size? Pick DO or DONT.
233 #### =()<BIND_USE_SIZEOF @<BIND_USE_SIZEOF>@>()=
234 BIND_USE_SIZEOF DO
235 ## How should close-on-exec be done? Pick IOCTL or FCNTL.
236 #### =()<CLX_STYLE @<CLX_STYLE>@>()=
237 CLX_STYLE FCNTL
238 ## How should non-blocking I/O be done? Pick IOCTL or FCNTL.
239 #### =()<NBIO_STYLE @<NBIO_STYLE>@>()=
240 NBIO_STYLE FCNTL
241 ## How should resource-totalling be done? Pick RUSAGE or TIMES
242 #### =()<RES_STYLE @<RES_STYLE>@>()=
243 RES_STYLE TIMES
244 ## How to get number of available descriptors?
245 ## Pick GETDTAB, GETRLIMIT, SYSCONF, ULIMIT, or CONSTANT.
246 #### =()<FDCOUNT_STYLE @<FDCOUNT_STYLE>@>()=
247 FDCOUNT_STYLE SYSCONF
248 ## If greater than -1, then use [gs]etrlimit to set that many descriptors.
249 ## If -1, then no [gs]etrlimit calls are done.
250 #### =()<NOFILE_LIMIT @<NOFILE_LIMIT>@>()=
251 NOFILE_LIMIT -1
252 ## Do you need <time.h> as well as <sys/time.h>? Pick DO or DONT.
253 #### =()<NEED_TIME @<NEED_TIME>@>()=
254 NEED_TIME DONT
255 ## What predicate, if any, the <ctype.h> macros need
256 #### =()<CTYPE @<CTYPE>@>()=
257 CTYPE (isascii((c)) && isXXXXX((c)))
258 #CTYPE ((c) > 0 && isXXXXX((c)))
259 #CTYPE isXXXXX((c))
260 ## What's the return type of abort? Usually int or void.
261 #### =()<ABORTVAL @<ABORTVAL>@>()=
262 ABORTVAL void
263 ## What's the return type of alarm? Usually int or unsigned int.
264 #### =()<ALARMVAL @<ALARMVAL>@>()=
265 ALARMVAL unsigned
266 ## What's the return type of getpid? Usually int or unsigned int.
267 #### =()<GETPIDVAL @<GETPIDVAL>@>()=
268 GETPIDVAL pid_t
269 ## What's the return type of sleep? Usually int or unsigned int.
270 #### =()<SLEEPVAL @<SLEEPVAL>@>()=
271 SLEEPVAL unsigned
272 ## What's the return type of qsort? Usually int or void.
273 #### =()<QSORTVAL @<QSORTVAL>@>()=
274 QSORTVAL void
275 ## What's the return type of lseek? Usually long or off_t.
276 #### =()<LSEEKVAL @<LSEEKVAL>@>()=
277 LSEEKVAL off_t
278 ## What's the return type of free? Usually int or void.
279 #### =()<FREEVAL @<FREEVAL>@>()=
280 FREEVAL void
281 ## What's the return type of exit? Usually int or void.
282 ## (For gcc (not pedantic ANSI) use "volatile void" in EXITVAL and _EXITVAL.)
283 #### =()<EXITVAL @<EXITVAL>@>()=
284 EXITVAL void
285 ## What's the return type of _exit? Usually int or void.
286 #### =()<_EXITVAL @<_EXITVAL>@>()=
287 _EXITVAL void
288
289
290 ##
291 ## 5. C LIBRARY OMISSIONS
292 ## Possible values:
293 ## MISSING_MAN strcasecmp.3 syslog.3
294 ## MISSING_SRC strcasecmp.c syslog.c strerror.c getdtab.c
295 ## MISSING_OBJ strcasecmp.o syslog.o strerror.o getdtab.c
296 ## getdtab has a getdtablesize() routine if you need it; see the lib
297 ## directory and Install.ms for others.
298 ## OSx systems should add $(OSXATTOBJ) to MISSING_OBJ.
299 #### =()<MISSING_MAN @<MISSING_MAN>@>()=
300 MISSING_MAN
301 #### =()<MISSING_SRC @<MISSING_SRC>@>()=
302 MISSING_SRC
303 #### =()<MISSING_OBJ @<MISSING_OBJ>@>()=
304 MISSING_OBJ
305
306
307 ##
308 ## 6. MISCELLANEOUS CONFIG DATA
309 ##
310 ## Use read/write to update the active file, or mmap? Pick READ or MMAP.
311 #### =()<ACT_STYLE @<ACT_STYLE>@>()=
312 ACT_STYLE READ
313 ## Do you want mail notifications of bad control messages. DO or DONT
314 ## Setting it to do results in a lot of mail with the number of spammers
315 ## out there.
316 #### =()<MAIL_BADCONTROLS @<MAIL_BADCONTROLS>@>()=
317 MAIL_BADCONTROLS DONT
318 ## What type of pointer does mmap() manage? Normally ``caddr_t'' or ``void *''
319 ## or ``char *''
320 #### =()<MMAP_PTR @<MMAP_PTR>@>()=
321 MMAP_PTR caddr_t
322 ## Should we msync when using mmap? Pick DO or DONT. Useful
323 ## with some slightly broken mmap implementations. (like HPUX and BSD/OS).
324 #### =()<MMAP_SYNC @<MMAP_SYNC>@>()=
325 MMAP_SYNC DONT
326 ## Should we call your msync() with 3 args? (addr,len,flags)
327 ## Choose DO or DONT.
328 #### =()<MSYNC_3_ARG @<MSYNC_3_ARG>@>()=
329 MSYNC_3_ARG DONT
330 ## Do clients use our NNTP-server-open routine, or the one in NNTP?
331 ## INND is nicer, but you must install inn.conf files everywhere; NNTP
332 ## is better if you already have lots of /usr/lib/news/server files.
333 ## Pick INND or NNTP.
334 #### =()<REM_STYLE @<REM_STYLE>@>()=
335 REM_STYLE INND
336 ## Should rnews save articles that the server rejects? Pick DO or DONT.
337 #### =()<RNEWS_SAVE_BAD @<RNEWS_SAVE_BAD>@>()=
338 RNEWS_SAVE_BAD DONT
339 ## Should rnews log articles innd already has? Pick SYSLOG, FILE, OR DONT.
340 #### =()<RNEWS_LOG_DUPS @<RNEWS_LOG_DUPS>@>()=
341 RNEWS_LOG_DUPS DONT
342 ## Look in _PATH_RNEWSPROGS for rnews unpackers? Pick DO or DONT.
343 #### =()<RNEWSPROGS @<RNEWSPROGS>@>()=
344 RNEWSPROGS DO
345 ## Should rnews try the local host? Pick DO or DONT.
346 #### =()<RNEWSLOCALCONNECT @<RNEWSLOCALCONNECT>@>()=
347 RNEWSLOCALCONNECT DO
348 ## Environment variable that has remote hostname for rnews.
349 #### =()<_ENV_UUCPHOST @<_ENV_UUCPHOST>@>()=
350 _ENV_UUCPHOST UU_MACHINE
351 ## Require posts to have under 50% inclusion (">") lines? Pick DO OR DONT.
352 ## (This is only for inews and nnrpd.)
353 #### =()<CHECK_INCLUDED_TEXT @<CHECK_INCLUDED_TEXT>@>()=
354 CHECK_INCLUDED_TEXT DO
355 ## Put hosts in the inews Path header? Pick DO or DONT.
356 #### =()<INEWS_PATH @<INEWS_PATH>@>()=
357 INEWS_PATH DO
358 ## Munge the gecos field of password entry? Pick DO or DONT.
359 #### =()<MUNGE_GECOS @<MUNGE_GECOS>@>()=
360 MUNGE_GECOS DO
361 ## How many times to try to fork before giving up
362 #### =()<MAX_FORKS @<MAX_FORKS>@>()=
363 MAX_FORKS 10
364 ## Largest acceptable article size; 0 allows any size
365 #### =()<MAX_ART_SIZE @<MAX_ART_SIZE>@>()=
366 MAX_ART_SIZE 1000000L
367 ## Value of dbzincore(FLAG) call in innd. Pick 1 or 0.
368 #### =()<INND_DBZINCORE @<INND_DBZINCORE>@>()=
369 INND_DBZINCORE 1
370 ## Should sub-processes get a nice(2) value? Pick DO or DONT.
371 #### =()<INND_NICE_KIDS @<INND_NICE_KIDS>@>()=
372 INND_NICE_KIDS DO
373 ## Value for nice(2) call in innd.
374 #### =()<INND_NICE_VALUE @<INND_NICE_VALUE>@>()=
375 INND_NICE_VALUE 4
376 ## Null-terminated list of unknown commands to not log to syslog.
377 ## INND_QUIET_BADLIST "xstream", "xfoo", NULL
378 #### =()<INND_QUIET_BADLIST @<INND_QUIET_BADLIST>@>()=
379 INND_QUIET_BADLIST NULL
380 ## Null-terminated set of illegal distribution patterns for local postings.
381 #### =()<BAD_DISTRIBS @<BAD_DISTRIBS>@>()=
382 BAD_DISTRIBS "*.*",NULL
383 ## Verify that the poster is the person doing the cancel? Pick DO or DONT.
384 ## (Can't do this if cancel arrives before the article does, by the way,
385 ## in which case the early cancel will be ignored.)
386 #### =()<VERIFY_CANCELS @<VERIFY_CANCELS>@>()=
387 VERIFY_CANCELS DONT
388 ## Log "ctlinnd cancel" commands to syslog? Pick DO or DONT.
389 #### =()<LOG_CANCEL_COMMANDS @<LOG_CANCEL_COMMANDS>@>()=
390 LOG_CANCEL_COMMANDS DONT
391 ## File unknown "to.*" groups into the "to" newsgroup? Pick DO or DONT.
392 #### =()<MERGE_TO_GROUPS @<MERGE_TO_GROUPS>@>()=
393 MERGE_TO_GROUPS DONT
394 ## File articles in unknown newsgroups into junk? Pick DO or DONT.
395 #### =()<WANT_TRASH @<WANT_TRASH>@>()=
396 WANT_TRASH DONT
397 ## Record rejected articles in history? Pick DO or DONT.
398 #### =()<REMEMBER_TRASH @<REMEMBER_TRASH>@>()=
399 REMEMBER_TRASH DO
400 ## Check the linecount against the Lines header? Pick DO or DONT.
401 #### =()<CHECK_LINECOUNT @<CHECK_LINECOUNT>@>()=
402 CHECK_LINECOUNT DONT
403 ## If checking, the error must be within LINECOUNT_FUZZ lines.
404 ## Five is number of .signature lines + 1.
405 #### =()<LINECOUNT_FUZZ @<LINECOUNT_FUZZ>@>()=
406 LINECOUNT_FUZZ 5
407 ## Have innd throttle itself after this many I/O errors.
408 #### =()<IO_ERROR_COUNT @<IO_ERROR_COUNT>@>()=
409 IO_ERROR_COUNT 50
410 ## Default value for ctlinnd -t flag; use 0 to wait and poll.
411 #### =()<CTLINND_TIMEOUT @<CTLINND_TIMEOUT>@>()=
412 CTLINND_TIMEOUT 0
413 ## Flush logs if we go this long with no I/O.
414 #### =()<DEFAULT_TIMEOUT @<DEFAULT_TIMEOUT>@>()=
415 DEFAULT_TIMEOUT 300
416 ## INND closes channel if inactive this long (seconds).
417 #### =()<PEER_TIMEOUT @<PEER_TIMEOUT>@>()=
418 PEER_TIMEOUT (1 * 60 * 60)
419 ## NNRP exits if first command doesn't arrive within this time (seconds).
420 #### =()<INIT_CLIENT_TIMEOUT @<INIT_CLIENT_TIMEOUT>@>()=
421 INIT_CLIENT_TIMEOUT 30
422 ## NNRP exits if inactive for this long (seconds).
423 #### =()<CLIENT_TIMEOUT @<CLIENT_TIMEOUT>@>()=
424 CLIENT_TIMEOUT (10 * 60)
425 ## Allow nnrpd readers when paused or throttled? Pick DO or DONT.
426 #### =()<ALLOW_READERS @<ALLOW_READERS>@>()=
427 ALLOW_READERS DO
428 ## Refuse newsreader connections if load is higher then this; -1 disables.
429 #### =()<NNRP_LOADLIMIT @<NNRP_LOADLIMIT>@>()=
430 NNRP_LOADLIMIT 16
431 ## Don't readdir() spool dir if same group within this many secs.
432 #### =()<NNRP_RESCAN_DELAY @<NNRP_RESCAN_DELAY>@>()=
433 NNRP_RESCAN_DELAY 60
434 ## Do gethostbyaddr on client adresses in nnrp? Pick DO or DONT.
435 ## (If DONT, then use only IP addresses in hosts.nnrp)
436 #### =()<NNRP_GETHOSTBYADDR @<NNRP_GETHOSTBYADDR>@>()=
437 NNRP_GETHOSTBYADDR DO
438 ## How many Message-ID retrievals until nnrpd does a dbzincore? Set
439 ## to -1 to never do incore.
440 #### =()<NNRP_DBZINCORE_DELAY @<NNRP_DBZINCORE_DELAY>@>()=
441 NNRP_DBZINCORE_DELAY 40
442 ## Strip Sender from posts that didn't authenticate? Pick DO or DONT.
443 #### =()<NNRP_AUTH_SENDER @<NNRP_AUTH_SENDER>@>()=
444 NNRP_AUTH_SENDER DO
445 ## Do you want to make life easy for peers to pull feeds from you (it's
446 ## harder on your machine). Pick DO or DONT. With DONT, you get a small
447 ## sleep inserted before each ARTICLE command is processed. (With
448 ## apologies to the Australians in the audience).
449 #### =()<LIKE_PULLERS @<LIKE_PULLERS>@>()=
450 LIKE_PULLERS DO
451 ## Allow the NEWNEWS NNTP command? Pick DO or DONT.
452 ## (RFC 977 says you should; your server performance may not agree...)
453 #### =()<ALLOW_NEWNEWS @<ALLOW_NEWNEWS>@>()=
454 ALLOW_NEWNEWS DONT
455 ## How many read/write failures until channel is put to sleep or closed?
456 #### =()<BAD_IO_COUNT @<BAD_IO_COUNT>@>()=
457 BAD_IO_COUNT 5
458 ## Multiplier for sleep in EWOULDBLOCK writes (seconds).
459 #### =()<BLOCK_BACKOFF @<BLOCK_BACKOFF>@>()=
460 BLOCK_BACKOFF (2 * 60)
461 ## How many article-writes between active and history updates?
462 #### =()<ICD_SYNC_COUNT @<ICD_SYNC_COUNT>@>()=
463 ICD_SYNC_COUNT 10
464 ## Tell resolver _res.options to be fast? Pick DO or DONT.
465 #### =()<FAST_RESOLV @<FAST_RESOLV>@>()=
466 FAST_RESOLV DONT
467 ## Drop articles that were posted this many days ago.
468 #### =()<DEFAULT_CUTOFF @<DEFAULT_CUTOFF>@>()=
469 DEFAULT_CUTOFF 14
470 ## Maximum number of incoming NNTP connections.
471 #### =()<DEFAULT_CONNECTIONS @<DEFAULT_CONNECTIONS>@>()=
472 DEFAULT_CONNECTIONS 50
473 ## Wait this many seconds before channel restarts.
474 #### =()<CHANNEL_RETRY_TIME @<CHANNEL_RETRY_TIME>@>()=
475 CHANNEL_RETRY_TIME (5 * 60)
476 ## Wait this many seconds before seeing if pause is ended.
477 #### =()<PAUSE_RETRY_TIME @<PAUSE_RETRY_TIME>@>()=
478 PAUSE_RETRY_TIME (5 * 60)
479 ## Wait this many seconds between noticing inactive channels.
480 #### =()<CHANNEL_INACTIVE_TIME @<CHANNEL_INACTIVE_TIME>@>()=
481 CHANNEL_INACTIVE_TIME (10 * 60)
482 ## Put nntplink info (filename) into the log?
483 #### =()<NNTPLINK_LOG @<NNTPLINK_LOG>@>()=
484 NNTPLINK_LOG DONT
485 ## Put article size into the log?
486 #### =()<LOG_SIZE @<LOG_SIZE>@>()=
487 LOG_SIZE DO
488 ## Log by host IP address, rather than from Path line?
489 #### =()<IPADDR_LOG @<IPADDR_LOG>@>()=
490 IPADDR_LOG DO
491 ## Log NNTP activity after this many articles.
492 #### =()<NNTP_ACTIVITY_SYNC @<NNTP_ACTIVITY_SYNC>@>()=
493 NNTP_ACTIVITY_SYNC 200
494 ## Free buffers bigger than this when we're done with them.
495 #### =()<BIG_BUFFER @<BIG_BUFFER>@>()=
496 BIG_BUFFER (2 * START_BUFF_SIZE)
497 ## A general small buffer.
498 #### =()<SMBUF @<SMBUF>@>()=
499 SMBUF 256
500 ## Buffer for a single article name.
501 #### =()<MAXARTFNAME @<MAXARTFNAME>@>()=
502 MAXARTFNAME 10
503 ## Buffer for a single pathname in the spool directory.
504 #### =()<SPOOLNAMEBUFF @<SPOOLNAMEBUFF>@>()=
505 SPOOLNAMEBUFF 512
506 ## Maximum size of a single header.
507 #### =()<MAXHEADERSIZE @<MAXHEADERSIZE>@>()=
508 MAXHEADERSIZE 1024
509 ## Byte limit on locally-posted articles; 0 to disable the check.
510 #### =()<LOCAL_MAX_ARTSIZE @<LOCAL_MAX_ARTSIZE>@>()=
511 LOCAL_MAX_ARTSIZE 1000000L
512 ## Default number of bytes to hold in memory when buffered.
513 #### =()<SITE_BUFFER_SIZE @<SITE_BUFFER_SIZE>@>()=
514 SITE_BUFFER_SIZE (16 * 1024)
515 ## Do you have uustat, or just uuq? Pick DO or DONT
516 #### =()<HAVE_UUSTAT @<HAVE_UUSTAT>@>()=
517 HAVE_UUSTAT DO
518 ## Should INN do some setsockopts on network connections. Pick DO or DONT.
519 ## Some versions of Solaris should set to DONT (pre 2.4 it seems)
520 #### =()<SET_SOCKOPT @<SET_SOCKOPT>@>()=
521 SET_SOCKOPT DO
522
523
524 ##
525 ## 7. PATHS TO COMMON PROGRAMS
526 ## Where the raison d'etre for this distribution lives.
527 #### =()<_PATH_INND @<_PATH_INND>@>()=
528 _PATH_INND /usr/news/bin/innd
529 ## Where the optional front-end that exec's innd lives.
530 #### =()<_PATH_INNDSTART @<_PATH_INNDSTART>@>()=
531 _PATH_INNDSTART /usr/news/bin/inndstart
532 ## Where news boot-up script should be installed.
533 #### =()<_PATH_NEWSBOOT @<_PATH_NEWSBOOT>@>()=
534 _PATH_NEWSBOOT /usr/news/bin/rc.news
535 ## Where sendmail, or a look-alike, lives. Inlude %s for addresses.
536 #### =()<_PATH_SENDMAIL @<_PATH_SENDMAIL>@>()=
537 _PATH_SENDMAIL /usr/ucblib/sendmail -oi %s
538 ## Where the shell is.
539 #### =()<_PATH_SH @<_PATH_SH>@>()=
540 _PATH_SH /bin/sh
541 ## Where the compress program lives.
542 #### =()<_PATH_COMPRESS @<_PATH_COMPRESS>@>()=
543 _PATH_COMPRESS /usr/bin/compress
544 ## What extension your compress appends
545 #### =()<_PATH_COMPRESSEXT @<_PATH_COMPRESSEXT>@>()=
546 _PATH_COMPRESSEXT .Z
547 ## Where egrep lives (you might need the FSF one; see scanlogs)
548 #### =()<_PATH_EGREP @<_PATH_EGREP>@>()=
549 _PATH_EGREP /usr/bin/egrep
550 ## Where perl lives
551 #### =()<_PATH_PERL @<_PATH_PERL>@>()=
552 _PATH_PERL /usr/local/bin/perl
553 ## Where awk lives
554 #### =()<_PATH_AWK @<_PATH_AWK>@>()=
555 _PATH_AWK /usr/bin/awk
556 ## Where sed lives (you might need the FSF one)
557 #### =()<_PATH_SED @<_PATH_SED>@>()=
558 _PATH_SED /usr/bin/sed
559 ## Where sort lives (you may want the FSF one).
560 #### =()<_PATH_SORT @<_PATH_SORT>@>()=
561 _PATH_SORT /usr/bin/sort
562 ## Where inews lives.
563 #### =()<_PATH_INEWS @<_PATH_INEWS>@>()=
564 _PATH_INEWS /usr/news/bin/inews
565 ## Where rnews lives.
566 #### =()<_PATH_RNEWS @<_PATH_RNEWS>@>()=
567 _PATH_RNEWS /usr/news/bin/rnews
568 ## Where generic authentication programs live.
569 #### =()<_PATH_AUTHDIR @<_PATH_AUTHDIR>@>()=
570 _PATH_AUTHDIR /usr/news/bin/auth
571 ## Where the NNRP server lives.
572 #### =()<_PATH_NNRPD @<_PATH_NNRPD>@>()=
573 _PATH_NNRPD /usr/news/bin/nnrpd
574 ## The path of the process run when an unknown host connects to innd.
575 ## Usually the same as _PATH_NNRPD, but may be, e.g., the path to
576 ## nntpd from the reference implementation.
577 #### =()<_PATH_NNTPD @<_PATH_NNTPD>@>()=
578 _PATH_NNTPD /usr/news/bin/nnrpd
579 ## Where the NNQR server lives. Make same as _PATH_NNRPD for now
580 #### =()<_PATH_NNQRD @<_PATH_NNRPD>@>()=
581 _PATH_NNQRD /usr/news/bin/nnrpd
582 ## Where most other programs live.
583 ## See also _PATH_RNEWSPROGS and _PATH_CONTROLPROGS, below.
584 #### =()<_PATH_NEWSBIN @<_PATH_NEWSBIN>@>()=
585 _PATH_NEWSBIN /usr/news/bin
586 ## Where temporary files live on the server. Probably shouldn't be world
587 ## writable.
588 #### =()<_PATH_TMP @<_PATH_TMP>@>()=
589 _PATH_TMP /var/tmp
590 ## Command to send mail (with -s "subject" allowed)
591 #### =()<_PATH_MAILCMD @<_PATH_MAILCMD>@>()=
592 _PATH_MAILCMD /usr/news/bin/innmail
593 ## Where scripts should have shlock create locks.
594 #### =()<_PATH_LOCKS @<_PATH_LOCKS>@>()=
595 _PATH_LOCKS /var/news/locks
596 ## Where your GNU gzip binary is (for rnews to run on gzipped batches).
597 #### =()<_PATH_GZIP @<_PATH_GZIP>@>()=
598 _PATH_GZIP /usr/contrib/bin/gzip
599
600 ##
601 ## 8. PATHS RELATED TO THE SPOOL DIRECTORY
602 ## Spool directory, where articles live.
603 #### =()<_PATH_SPOOL @<_PATH_SPOOL>@>()=
604 _PATH_SPOOL /var/news/spool/articles
605 ## Spool directory where overview data lives.
606 #### =()<_PATH_OVERVIEWDIR @<_PATH_OVERVIEWDIR>@>()=
607 _PATH_OVERVIEWDIR /var/news/spool/over.view
608 ## Name of overview file within its spool directory.
609 #### =()<_PATH_OVERVIEW @<_PATH_OVERVIEW>@>()=
610 _PATH_OVERVIEW .overview
611 ## Where rnews spools its input.
612 #### =()<_PATH_SPOOLNEWS @<_PATH_SPOOLNEWS>@>()=
613 _PATH_SPOOLNEWS /var/news/spool/in.coming
614 ## Where rnews creates temporary files until finished
615 #### =()<_PATH_SPOOLTEMP @<_PATH_SPOOLTEMP>@>()=
616 _PATH_SPOOLTEMP /var/news/spool/tmp
617 ## Where rnews puts bad input.
618 #### =()<_PATH_BADNEWS @<_PATH_BADNEWS>@>()=
619 _PATH_BADNEWS /var/news/spool/in.coming/bad
620 ## Where rnews puts bad input, relative to _PATH_SPOOLNEWS.
621 #### =()<_PATH_RELBAD @<_PATH_RELBAD>@>()=
622 _PATH_RELBAD bad
623 ## Where the XBATCH command should put the batches. Normally same as
624 ## _PATH_SPOOLNEWS so that 'rnews -U' can find it.
625 #### =()<_PATH_XBATCHES @<_PATH_XBATCHES>@>()=
626 _PATH_XBATCHES /var/news/spool/in.coming
627
628
629 ##
630 ## 9. EXECUTION PATHS FOR INND AND RNEWS
631 ## Pathname where dups are logged if RNEWS_LOG_DUPS is FILE.
632 #### =()<_PATH_RNEWS_DUP_LOG @<_PATH_RNEWS_DUP_LOG>@>()=
633 _PATH_RNEWS_DUP_LOG /dev/null
634 ## Rnews may execute any program in this directory; see RNEWSPROGS.
635 #### =()<_PATH_RNEWSPROGS @<_PATH_RNEWSPROGS>@>()=
636 _PATH_RNEWSPROGS /usr/news/bin/rnews.libexec
637 ## Path to control messages scripts.
638 #### =()<_PATH_CONTROLPROGS @<_PATH_CONTROLPROGS>@>()=
639 _PATH_CONTROLPROGS /usr/news/bin/control
640 ## Default "unknown/illegal" control script, within _PATH_CONTROLPROGS.
641 #### =()<_PATH_BADCONTROLPROG @<_PATH_BADCONTROLPROG>@>()=
642 _PATH_BADCONTROLPROG default
643
644
645 ##
646 ## 10. SOCKETS CREATED BY INND OR CLIENTS
647 #### =()<_PATH_INNDDIR @<_PATH_INNDDIR>@>()=
648 _PATH_INNDDIR /var/news/run
649 ## Unix-domain stream socket that rnews connects to.
650 #### =()<_PATH_NNTPCONNECT @<_PATH_NNTPCONNECT>@>()=
651 _PATH_NNTPCONNECT /var/news/run/nntpin
652 ## Unix-domain datagram socket that ctlinnd to.
653 #### =()<_PATH_NEWSCONTROL @<_PATH_NEWSCONTROL>@>()=
654 _PATH_NEWSCONTROL /var/news/run/control
655 ## Temporary socket created by ctlinnd; run through mktemp
656 #### =()<_PATH_TEMPSOCK @<_PATH_TEMPSOCK>@>()=
657 _PATH_TEMPSOCK /var/news/run/ctlinndXXXXXX
658
659
660 ##
661 ## 11. LOG AND CONFIG FILES
662 ## Shell script that sets most of these as shell vars
663 #### =()<_PATH_SHELLVARS @<_PATH_SHELLVARS>@>()=
664 _PATH_SHELLVARS /var/news/etc/innshellvars
665 ## Perl script that sets most of these as perl variables
666 #### =()<_PATH_PERL_SHELLVARS @<_PATH_PERL_SHELLVARS>@>()=
667 _PATH_PERL_SHELLVARS /var/news/etc/innshellvars.pl
668 ## TCL script that sets most of these as tcl variables
669 #### =()<_PATH_TCL_SHELLVARS @<_PATH_TCL_SHELLVARS>@>()=
670 _PATH_TCL_SHELLVARS /var/news/etc/innshellvars.tcl
671 ## csh script that sets most of these as csh variables
672 #### =()<_PATH_CSH_SHELLVARS @<_PATH_CSH_SHELLVARS>@>()=
673 _PATH_CSH_SHELLVARS /var/news/etc/innshellvars.csh
674 ## Where most config and data files are usually stored; not required
675 ## to the home directory of NEWSUSER.
676 #### =()<_PATH_NEWSLIB @<_PATH_NEWSLIB>@>()=
677 _PATH_NEWSLIB /var/news/etc
678 ## The group owner of the rnews program. Usually uucp.
679 #### =()<RNEWS_GROUP @<RNEWS_GROUP>@>()=
680 RNEWS_GROUP uucp
681 ## The server's log file.
682 #### =()<_PATH_LOGFILE @<_PATH_LOGFILE>@>()=
683 _PATH_LOGFILE /var/log/news/news
684 ## The server's error log file.
685 #### =()<_PATH_ERRLOG @<_PATH_ERRLOG>@>()=
686 _PATH_ERRLOG /var/log/news/errlog
687 ## Where most sylog log files go; see also scanlogs, innstat, etc.
688 #### =()<_PATH_MOST_LOGS @<_PATH_MOST_LOGS>@>()=
689 _PATH_MOST_LOGS /var/log/news
690 ## How many generates of log files to keep.
691 #### =()<LOG_CYCLES @<LOG_CYCLES>@>()=
692 LOG_CYCLES 3
693 ## Text value of the server's pid.
694 #### =()<_PATH_SERVERPID @<_PATH_SERVERPID>@>()=
695 _PATH_SERVERPID /var/news/run/innd.pid
696 ## The newsfeeds file, on the server host.
697 #### =()<_PATH_NEWSFEEDS @<_PATH_NEWSFEEDS>@>()=
698 _PATH_NEWSFEEDS /var/news/etc/newsfeeds
699 ## The article history database, on the server host.
700 #### =()<_PATH_HISTORY @<_PATH_HISTORY>@>()=
701 _PATH_HISTORY /var/news/etc/history
702 ## File listing the sites that feed us news.
703 #### =()<_PATH_INNDHOSTS @<_PATH_INNDHOSTS>@>()=
704 _PATH_INNDHOSTS /var/news/etc/hosts.nntp
705 ## The active file, on the server host.
706 #### =()<_PATH_ACTIVE @<_PATH_ACTIVE>@>()=
707 _PATH_ACTIVE /var/news/etc/active
708 ## A temporary active file, for writing on the server host.
709 #### =()<_PATH_NEWACTIVE @<_PATH_NEWACTIVE>@>()=
710 _PATH_NEWACTIVE /var/news/etc/active.tmp
711 ## An old active file on the server host.
712 #### =()<_PATH_OLDACTIVE @<_PATH_OLDACTIVE>@>()=
713 _PATH_OLDACTIVE /var/news/etc/active.old
714 ## The log of when groups are created.
715 #### =()<_PATH_ACTIVETIMES @<_PATH_ACTIVETIMES>@>()=
716 _PATH_ACTIVETIMES /var/news/etc/active.times
717 ## Where batch files are located.
718 #### =()<_PATH_BATCHDIR @<_PATH_BATCHDIR>@>()=
719 _PATH_BATCHDIR /var/news/spool/out.going
720 ## Where archives are kept.
721 #### =()<_PATH_ARCHIVEDIR @<_PATH_ARCHIVEDIR>@>()=
722 _PATH_ARCHIVEDIR /var/news/spool/archive
723 ## Where NNRP distributions file is
724 #### =()<_PATH_NNRPDIST @<_PATH_NNRPDIST>@>()=
725 _PATH_NNRPDIST /var/news/etc/distributions
726 ## Where the NNRP automatic subscriptions file is
727 #### =()<_PATH_NNRPSUBS @<_PATH_NNRPSUBS>@>()=
728 _PATH_NNRPSUBS /var/news/etc/subscriptions
729 ## Where the default Distribution assignments file is
730 #### =()<_PATH_DISTPATS @<_PATH_DISTPATS>@>()=
731 _PATH_DISTPATS /var/news/etc/distrib.pats
732 #### =()<_PATH_NEWSGROUPS @<_PATH_NEWSGROUPS>@>()=
733 _PATH_NEWSGROUPS /var/news/etc/newsgroups
734 ## File where client configuration parameters can be read.
735 #### =()<_PATH_CONFIG @<_PATH_CONFIG>@>()=
736 _PATH_CONFIG /var/news/etc/inn.conf
737 ## The possible active file, on clients (NFS-mounted, e.g.).
738 #### =()<_PATH_CLIENTACTIVE @<_PATH_CLIENTACTIVE>@>()=
739 _PATH_CLIENTACTIVE /var/news/etc/active
740 ## A temporary file, for client inews to use.
741 #### =()<_PATH_TEMPACTIVE @<_PATH_TEMPACTIVE>@>()=
742 _PATH_TEMPACTIVE /var/tmp/activeXXXXXX
743 ## Where to mail to the moderators.
744 #### =()<_PATH_MODERATORS @<_PATH_MODERATORS>@>()=
745 _PATH_MODERATORS /var/news/etc/moderators
746 ## A temporary file, for client inews to use.
747 #### =()<_PATH_TEMPMODERATORS @<_PATH_TEMPMODERATORS>@>()=
748 _PATH_TEMPMODERATORS /var/tmp/moderatorsXXXXXX
749 ## Where NNTP puts the name of the server.
750 #### =()<_PATH_SERVER @<_PATH_SERVER>@>()=
751 _PATH_SERVER /var/news/etc/server
752 ## File with name/password for all remote connections.
753 #### =()<_PATH_NNTPPASS @<_PATH_NNTPPASS>@>()=
754 _PATH_NNTPPASS /var/news/etc/passwd.nntp
755 ## NNRP access file.
756 #### =()<_PATH_NNRPACCESS @<_PATH_NNRPACCESS>@>()=
757 _PATH_NNRPACCESS /var/news/etc/nnrp.access
758 ## Default expire control file.
759 #### =()<_PATH_EXPIRECTL @<_PATH_EXPIRECTL>@>()=
760 _PATH_EXPIRECTL /var/news/etc/expire.ctl
761 ## Prolog to parse control scripts
762 #### =()<_PATH_PARSECTL @<_PATH_PARSECTL>@>()=
763 _PATH_PARSECTL /var/news/etc/parsecontrol
764 ## Access control file for control scripts.
765 #### =()<_PATH_CONTROLCTL @<_PATH_CONTROLCTL>@>()=
766 _PATH_CONTROLCTL /var/news/etc/control.ctl
767 ## Innwatch control file.
768 #### =()<_PATH_CTLWATCH @<_PATH_CTLWATCH>@>()=
769 _PATH_CTLWATCH /var/news/etc/innwatch.ctl
770 ## Where innwatch writes its own pid.
771 #### =()<_PATH_WATCHPID @<_PATH_WATCHPID>@>()=
772 _PATH_WATCHPID /var/news/run/innwatch.pid
773 ## Where innwatch writes status when it gets an interrupt
774 #### =()<_PATH_INNWSTATUS @<_PATH_INNWSTATUS>@>()=
775 _PATH_INNWSTATUS /var/news/run/innwatch.status
776 ## Format of news overview database
777 #### =()<_PATH_SCHEMA @<_PATH_SCHEMA>@>()=
778 _PATH_SCHEMA /var/news/etc/overview.fmt
779
780
781 ##
782 ## 12. INNWATCH CONFIGURATION
783 ## Load average (* 100) at which innd should be paused.
784 #### =()<INNWATCH_PAUSELOAD @<INNWATCH_PAUSELOAD>@>()=
785 INNWATCH_PAUSELOAD 1500
786 ## Load average (* 100) at which innd should be throttled.
787 #### =()<INNWATCH_HILOAD @<INNWATCH_HILOAD>@>()=
788 INNWATCH_HILOAD 2000
789 ## Load average (* 100) at which to restart innd (pause/throttle undone).
790 #### =()<INNWATCH_LOLOAD @<INNWATCH_LOLOAD>@>()=
791 INNWATCH_LOLOAD 1000
792 ## Space, in df output units, at which to throttle innd on _PATH_SPOOL
793 ## or _PATH_OVERVIEWDIR.
794 #### =()<INNWATCH_SPOOLSPACE @<INNWATCH_SPOOLSPACE>@>()=
795 INNWATCH_SPOOLSPACE 8000
796 ## Space, in df output units, at which to throttle innd on _PATH_BATCHDIR.
797 #### =()<INNWATCH_BATCHSPACE @<INNWATCH_BATCHSPACE>@>()=
798 INNWATCH_BATCHSPACE 800
799 ## Space, in df output units, at which to throttle innd on _PATH_NEWSLIB.
800 #### =()<INNWATCH_LIBSPACE @<INNWATCH_LIBSPACE>@>()=
801 INNWATCH_LIBSPACE 25000
802 ## Number of inodes at which to throttle innd on _PATH_SPOOL.
803 #### =()<INNWATCH_SPOOLNODES @<INNWATCH_SPOOLNODES>@>()=
804 INNWATCH_SPOOLNODES 200
805 ## How long to sleep between innwatch iterations.
806 #### =()<INNWATCH_SLEEPTIME @<INNWATCH_SLEEPTIME>@>()=
807 INNWATCH_SLEEPTIME 600
808 ## How inn (not just innwatch anymore) gets disk space usage
809 ## (SVR4 machine would probably use /usr/ucb/df)
810 #### =()<INNWATCH_DF @<INNWATCH_DF>@>()=
811 INNWATCH_DF /bin/df
812 ## Field number of INNWATCH_DF (with -i) output that gives free
813 ## inodes (starting at 1).
814 #### =()<INNWATCH_INODES @<INNWATCH_INODES>@>()=
815 INNWATCH_INODES 7
816 ## Field number of INNWATCH_DF output that gives the free block count.
817 ##### =()<INNWATCH_BLOCKS @<INNWATCH_BLOCKS>@>()=
818 INNWATCH_BLOCKS 4
819
820
821
822 ##
823 ## 13. TCL Configuration
824 ## Do you want TCL support? Pick DO or DONT
825 #### =()<TCL_SUPPORT @<TCL_SUPPORT>@>()=
826 TCL_SUPPORT DONT
827 ## Where your tcl header file live. Blank if no TCL
828 ### =()<TCL_INC @<TCL_INC>@>()=
829 TCL_INC
830 # TCL_INC -I/usr/local/include
831 ## How do you get the TCL library? Probably -ltcl -lm, blank if no TCL
832 #### =()<TCL_LIB @<TCL_LIB>@>()=
833 TCL_LIB
834 # TCL_LIB -ltcl -lm
835 ## TCL Startup File. Should probably be prefixed with the same value as
836 ## _PATH_CONTROLPROGS.
837 #### =()<_PATH_TCL_STARTUP @<_PATH_TCL_STARTUP>@>()=
838 _PATH_TCL_STARTUP /usr/news/bin/control/startup.tcl
839 ## TCL Filter File. Should probably be prefixed with the same value as
840 ## _PATH_CONTROLPROGS.
841 #### =()<_PATH_TCL_FILTER @<_PATH_TCL_FILTER>@>()=
842 _PATH_TCL_FILTER /usr/news/bin/control/filter.tcl
843
844
845 ##
846 ## 14. PGP Configuration
847 ##
848
849 ## Do you want PGP verification of control messages? Pick DO or DONT
850 ## If you change this then you need to fiddle with control.ctl.
851 ## Setting it DONT is a really bad idea with all the miscreants out there...
852 #### =()<WANT_PGPVERIFY @<WANT_PGPVERIFY>@>()=
853 WANT_PGPVERIFY DO
854 ## PGP binary.
855 #### =()<_PATH_PGP @<_PATH_PGP>@>()=
856 _PATH_PGP /usr/local/bin/pgp
857
858 ##
859 ## 15. Local Configuration
860 ##
861
862 ## Home of the NEWSUSER
863 #### =()<_PATH_NEWSHOME @<_PATH_NEWSHOME>@>()=
864 _PATH_NEWSHOME /usr/news
865
866
867 ##
868 ## 16. Actsync Configuration.
869 ##
870
871 ## Host to synchoronize active file with (see actsync and actsyncd manpages).
872 #### =()<ACTSYNC_HOST @<ACTSYNC_HOST>@>()=
873 ACTSYNC_HOST news.foo.bar.com
874 ## Flags actsyncd is to pass to actsync.
875 #### =()<ACTSYNC_FLAGS @<ACTSYNC_FLAGS>@>()=
876 ACTSYNC_FLAGS -v 2 -q 2 -b 0 -d 0 -g 7 -s 79 -t 2
877 ## Actsyncd config file.
878 #### =()<_PATH_ACTSYNC_CFG @<_PATH_ACTSYNC_CFG>@>()=
879 _PATH_ACTSYNC_CFG /var/news/etc/actsync.cfg
880 ## Actsyncd ignore file.
881 #### =()<_PATH_ACTSYNC_IGN @<_PATH_ACTSYNC_IGN>@>()=
882 _PATH_ACTSYNC_IGN /var/news/etc/actsync.ign
883
884
885
886 ## 17. Perl Configuration
887 ## Do you want Perl support? Pick DO or DONT
888 #### =()<PERL_SUPPORT @<PERL_SUPPORT>@>()=
889 PERL_SUPPORT DONT
890 ## How do you get the PERL libraries? Probably -lperl -lm, blank if no PERL
891 #### =()<PERL_LIB @<PERL_LIB>@>()=
892 PERL_LIB
893 #PERL_LIB -L/usr/local/gnu/lib/perl5/i386-bsdos/5.003/CORE -lperl -lm
894 ## Core directory (includes, libs). See perlembed(1)
895 #### =()<PERL_INC @<PERL_INC>@>()=
896 PERL_INC
897 #PERL_INC -I/usr/local/gnu/lib/perl5/i386-bsdos/5.003/CORE
898 ## Perl Filter Files. Should probably be prefixed with the same value as
899 ## _PATH_CONTROLPROGS.
900 #### =()<_PATH_PERL_STARTUP_INND @<_PATH_PERL_STARTUP_INND>@>()=
901 _PATH_PERL_STARTUP_INND /usr/news/bin/control/startup_innd.pl
902 #### =()<_PATH_PERL_FILTER_INND @<_PATH_PERL_FILTER_INND>@>()=
903 _PATH_PERL_FILTER_INND /usr/news/bin/control/filter_innd.pl
904 #### =()<_PATH_PERL_FILTER_NNRPD @<_PATH_PERL_FILTER_NNRPD>@>()=
905 _PATH_PERL_FILTER_NNRPD /usr/news/bin/control/filter_nnrpd.pl