Debian Codegraph @

executor-scripts/linux/bridge

raw
1 #!/bin/sh
2 [ -n "$VERBOSE" ] && set -x
3
4 # Copyright (C) 2012, 2020 Natanael Copa <[email protected]>
5 # Copyright (C) 2020 Ariadne Conill <[email protected]>
6 # Copyright (C) 2020 Maximilian Wilhelm <[email protected]>
7 #
8 # Permission to use, copy, modify, and/or distribute this software for any
9 # purpose with or without fee is hereby granted, provided that the above
10 # copyright notice and this permission notice appear in all copies.
11 #
12 # This software is provided 'as is' and without any warranty, express or
13 # implied. In no event shall the authors be liable for any damages arising
14 # from the use of this software.
15
16 ################################################################################
17 # Bridge management functions #
18 ################################################################################
19
20 all_ports_exist() {
21 local i=
22 for i in "$@"; do
23 [ -d /sys/class/net/$i ] || return 1
24 done
25 return 0
26 }
27
28 wait_ports() {
29 local timeout= waitports=
30 [ -z "$IF_BRIDGE_WAITPORT" ] && return 0
31 set -- $IF_BRIDGE_WAITPORT
32 timeout="$1"
33 shift
34 waitports="$@"
35 [ -z "$waitports" ] && waitports="$PORTS"
36 while ! all_ports_exist $waitports; do
37 [ "$timeout" -eq 0 ] && return 0
38 timeout=$(($timeout - 1))
39 sleep 1
40 done
41 }
42
43 all_ports() {
44 local i=
45 for i in /sys/class/net/*/ifindex; do
46 i=${i%/*}
47 i=${i##*/}
48 case "$i" in
49 lo|$IFACE) continue;;
50 *) echo $i;;
51 esac
52 done
53 }
54
55 add_ports() {
56 local port=
57 for port in $PORTS; do
58 if [ -n "$IF_BRIDGE_HW" ]; then
59 ip link set dev $port addr $IF_BRIDGE_HW
60 fi
61 ip link set dev $port master $IFACE && ip link set dev $port up
62 done
63 }
64
65 del_ports() {
66 local port=
67 for port in $PORTS; do
68 ip link set dev $port down
69 ip link set dev $port nomaster
70 done
71 }
72
73 set_bridge_opts_brctl() {
74 [ -n "$IF_BRIDGE_AGEING" ] \
75 && brctl setageing $IFACE $IF_BRIDGE_AGEING
76 [ -n "$IF_BRIDGE_BRIDGEPRIO" ] \
77 && brctl setbridgeprio $IFACE $IF_BRIDGE_BRIDGEPRIO
78 [ -n "$IF_BRIDGE_FD" ] \
79 && brctl setfd $IFACE $IF_BRIDGE_FD
80 [ -n "$IF_BRIDGE_HELLO" ] \
81 && brctl sethello $IFACE $IF_BRIDGE_HELLO
82 [ -n "$IF_BRIDGE_MAXAGE" ] \
83 && brctl setmaxage $IFACE $IF_BRIDGE_MAXAGE
84 [ -n "$IF_BRIDGE_PATHCOST" ] \
85 && brctl setpathcost $IFACE $IF_BRIDGE_PATHCOST
86 [ -n "$IF_BRIDGE_PORTPRIO" ] \
87 && brctl setportprio $IFACE $IF_BRIDGE_PORTPRIO
88 [ -n "$IF_BRIDGE_STP" ] \
89 && brctl stp $IFACE $IF_BRIDGE_STP
90 }
91
92 yesno() {
93 case "$1" in
94 yes|YES|true|TRUE|1)
95 echo 1
96 ;;
97 *)
98 echo 0
99 ;;
100 esac
101 }
102
103 set_bridge_opts_iproute2() {
104 [ -n "$IF_BRIDGE_AGEING" ] \
105 && ip link set dev $IFACE type bridge ageing_time $IF_BRIDGE_AGEING
106 [ -n "$IF_BRIDGE_BRIDGEPRIO" ] \
107 && ip link set dev $IFACE type bridge priority $IF_BRIDGE_BRIDGEPRIO
108 [ -n "$IF_BRIDGE_FD" ] \
109 && ip link set dev $IFACE type bridge forward_delay $IF_BRIDGE_FD
110 [ -n "$IF_BRIDGE_HELLO" ] \
111 && ip link set dev $IFACE type bridge hello_time $IF_BRIDGE_HELLO
112 [ -n "$IF_BRIDGE_MAXAGE" ] \
113 && ip link set dev $IFACE type bridge max_age $IF_BRIDGE_MAXAGE
114 [ -n "$IF_BRIDGE_PATHCOST" ] \
115 && bridge link set dev $IFACE cost $IF_BRIDGE_PATHCOST
116 [ -n "$IF_BRIDGE_PORTPRIO" ] \
117 && bridge link set dev $IFACE priority $IF_BRIDGE_PORTPRIO
118 [ -n "$IF_BRIDGE_STP" ] \
119 && ip link set dev $IFACE type bridge stp $(yesno $IF_BRIDGE_STP)
120 [ -n "$IF_BRIDGE_VLAN_AWARE" ] \
121 && ip link set dev $IFACE type bridge vlan_filtering $(yesno $IF_BRIDGE_VLAN_AWARE)
122 }
123
124 set_bridge_opts() {
125 [ -x /sbin/bridge ] && set_bridge_opts_iproute2 && return 0
126 [ -x /sbin/brctl ] && set_bridge_opts_brctl && return 0
127 }
128
129
130 all_ports_ready() {
131 local port=
132 for port in $PORTS; do
133 case $(cat /sys/class/net/$IFACE/brif/$port/state) in
134 ""|0|3) ;; # 0 = disabled, 3 = forwarding
135 [12]) return 1;;
136 esac
137 done
138 return 0
139 }
140
141 find_maxwait() {
142 awk '{printf("%.f\n", 2 * $0 / 100); }' \
143 /sys/class/net/$IFACE/bridge/forward_delay
144 }
145
146 wait_bridge() {
147 local timeout=$IF_BRIDGE_MAXWAIT
148 if [ -z "$timeout" ]; then
149 timeout=$(find_maxwait)
150 fi
151 ip link set dev $IFACE up
152 while ! all_ports_ready; do
153 [ $timeout -eq 0 ] && break
154 timeout=$(($timeout - 1))
155 sleep 1
156 done
157 }
158
159
160 ################################################################################
161 # Bridge port management functions #
162 ################################################################################
163
164 configure_access_port() {
165 port="$1"
166 vlan="$2"
167 self="$3"
168
169 # Cleans all existing VLANs (probably at least VLAN 1)
170 bridge vlan show dev ${port} | tail -n +2 | grep -v '^$' | sed -e "s/^${port}//" | while read vid flags; do
171 bridge vlan del vid "${vid}" dev "${port}" ${self}
172 done
173
174 bridge vlan add vid "${vlan}" pvid untagged dev "${port}" ${self}
175 }
176
177 configure_trunk_port() {
178 port="$1"
179 self="$2"
180
181 # Working on the bridge itself?
182 if [ "${self}" ]; then
183 allow_untagged="${IF_BRIDGE_ALLOW_UNTAGGED}"
184 pvid="${IF_BRIDGE_PVID}"
185 vids="${IF_BRIDGE_VIDS}"
186 else
187 allow_untagged=$(ifquery -p bridge-allow-untagged ${port} 2>/dev/null || true)
188 pvid=$(ifquery -p bridge-pvid ${port} 2>/dev/null || true)
189 vids=$(ifquery -p bridge-vids ${port} 2>/dev/null || true)
190 fi
191
192 # If bridge-allow-untagged if set to off, remove untagged VLAN. If it's
193 # one of our bridge-vids, it will be set again later.
194 if [ "${allow_untagged}" -a "$(yesno ${allow_untagged})" = 0 ]; then
195 untagged_vid=$(bridge vlan show dev ${port} | tail -n +2 | grep -v '^$' | sed -e "s/^${port}//" | awk '/Untagged/ { print $1 }')
196 if [ "${untagged_vid}" ]; then
197 bridge vlan del vid "${untagged_vid}" dev "${port}" ${self}
198 fi
199 fi
200
201 # The vlan specified is to be considered a PVID at ingress.
202 # Any untagged frames will be assigned to this VLAN.
203 if [ "${pvid}" ]; then
204 cur_pvid=$(bridge vlan show dev ${port} | tail -n +2 | grep -v '^$' | sed -e "s/^${port}//" | awk '/PVID/ { print $1 }')
205 if [ "${cur_pvid}" ]; then
206 bridge vlan del vid ${cur_pvid} dev "${port}" ${self}
207 fi
208
209 bridge vlan add vid "${pvid}" dev "${port}" pvid untagged ${self}
210 fi
211
212 # Add regular tagged VLANs
213 for vid in ${vids}; do
214 bridge vlan add vid $vid dev "${port}" ${self}
215 done
216 }
217
218 # Configure VLANs on the bridge interface itself
219 set_bridge_vlans() {
220 # Shall the bridge interface be an untagged port?
221 if [ "${IF_BRIDGE_ACCESS}" ]; then
222 configure_access_port "${IFACE}" "${IF_BRIDGE_ACCESS}" "self"
223
224 # Configure bridge interface as trunk port
225 else
226 configure_trunk_port "${IFACE}" "self"
227 fi
228 }
229
230 # Configure VLANs on the bridge-ports
231 set_bridge_port_vlans() {
232 for port in ${PORTS}; do
233 access_vlan=$(ifquery -p bridge-access ${port} 2>/dev/null || true)
234
235 # Shall this prot interface be an untagged port?
236 if [ "${access_vlan}" ]; then
237 configure_access_port "${port}" "${access_vlan}"
238
239 # Configure port as trunk
240 else
241 configure_trunk_port "${port}"
242 fi
243 done
244 }
245
246 case "$IF_BRIDGE_PORTS" in
247 "") ;;
248 none) PORTS="";;
249 all) PORTS=$(all_ports);;
250 *) PORTS="$IF_BRIDGE_PORTS";;
251 esac
252
253 case "$PHASE" in
254 depend)
255 # Called for the bridge interface
256 if [ "${IF_BRIDGE_PORTS}" ]; then
257 echo "$PORTS"
258 fi
259 ;;
260
261 create)
262 # Called for the bridge interface
263 if [ "${IF_BRIDGE_PORTS}" -a ! -d "/sys/class/net/${IFACE}" ]; then
264 ip link add "${IFACE}" type bridge
265 fi
266 ;;
267
268 pre-up)
269 # Called for the bridge interface
270 if [ "${IF_BRIDGE_PORTS}" ]; then
271 wait_ports
272 set_bridge_opts
273 set_bridge_vlans
274 add_ports
275 set_bridge_port_vlans
276 wait_bridge
277
278 # Called for a bridge member port
279 elif [ "${IF_BRIDGE_VIDS}" -o "${IF_BRIDGE_PVID}" -o "${IF_BRIDGE_ACCESS}" -o "${IF_BRIDGE_ALLOW_UNTAGGED}" ]; then
280 # Eventually we want to configure VLAN settings of member ports here.
281 # The current execution model does not allow this, so this is a no-op
282 # for now and we work around this by configuring ports while configuring
283 # the bridge.
284 true
285 fi
286 ;;
287
288 post-down)
289 # Called for the bridge interface
290 if [ "${IF_BRIDGE_PORTS}" ]; then
291 del_ports
292 ip link set dev $IFACE down
293 fi
294 ;;
295
296 destroy)
297 # Called for the bridge interface
298 if [ "${IF_BRIDGE_PORTS}" -a -d "/sys/class/net/${IFACE}" ]; then
299 ip link del "${IFACE}"
300 fi
301 ;;
302 esac