| 1 |
ISO-10303-21; |
| 2 |
HEADER; |
| 3 |
/* NOTE a valid model view name has to be asserted, replacing 'notYetAssigned' ----------------- */ |
| 4 |
FILE_DESCRIPTION( |
| 5 |
( 'ViewDefinition [notYetAssigned]' |
| 6 |
,'Comment [manual creation of example file]' |
| 7 |
) |
| 8 |
,'2;1'); |
| 9 |
/* NOTE standard header information according to ISO 10303-21 ---------------------------------- */ |
| 10 |
FILE_NAME( |
| 11 |
'standard_case_element_beam.ifc', |
| 12 |
'2011-11-07T18:00:00', |
| 13 |
('Thomas Liebich'), |
| 14 |
('buildingSMART International'), |
| 15 |
'IFC text editor', |
| 16 |
'IFC text editor', |
| 17 |
'reference file created for the IFC4 specification'); |
| 18 |
/* NOTE schema name to be replaced with 'IFC4' after the final release ------------------------ */ |
| 19 |
FILE_SCHEMA(('IFC4')); |
| 20 |
ENDSEC; |
| 21 |
|
| 22 |
DATA; |
| 23 |
#100= IFCBEAMTYPE('0juf4qyggSstrxA20Qwnsj',$,'IPE220','Beam type',$,$,$,$,$,.BEAM.); |
| 24 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 25 |
/* assignment of material and profile to the beam type */ |
| 26 |
#110= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20Q49sj',$,$,$,(#100),#111); |
| 27 |
#111= IFCMATERIALPROFILESET($,$,(#112),$); |
| 28 |
#112= IFCMATERIALPROFILE('IPE220',$,#113,#120,$,$); |
| 29 |
#113= IFCMATERIAL('S275J2',$,'Steel'); |
| 30 |
/* end of enhanced definitions --------------------------------------------- */ |
| 31 |
#120= IFCISHAPEPROFILEDEF(.AREA.,'IPE220',$,110.,220.,5.9,9.2,12.0,$,$); |
| 32 |
|
| 33 |
|
| 34 |
#200= IFCBEAMTYPE('0juf4qyggSstrxA20Qdisj',$,'1/2IPE300','Beam type',$,$,$,$,$,.BEAM.); |
| 35 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 36 |
/* assignment of material and profile to the beam type */ |
| 37 |
#210= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20Q2fsj',$,$,$,(#200),#211); |
| 38 |
#211= IFCMATERIALPROFILESET($,$,(#212),$); |
| 39 |
#212= IFCMATERIALPROFILE('1/2IPE300',$,#213,#220,$,$); |
| 40 |
#213= IFCMATERIAL('S275J2',$,'Steel'); |
| 41 |
/* end of enhanced definitions --------------------------------------------- */ |
| 42 |
#220= IFCTSHAPEPROFILEDEF(.AREA.,'1/2IPE300',$,150.0,150.0,7.1,10.7,15.0,$,$,$,$); |
| 43 |
|
| 44 |
|
| 45 |
/* beam A-1 - beam axis along global x axis -------------------------------- */ |
| 46 |
/* cardinal point = 1 - bottom left */ |
| 47 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 48 |
#1000= IFCBEAMSTANDARDCASE('0juf4qyggSI8rxA20Qwnsj',$,'A-1','IPE220','Beam',#1001,#1010,'A-1',$); |
| 49 |
#1001= IFCLOCALPLACEMENT(#100025,#1002); |
| 50 |
/* set local placement so that the z-axis is co-linear to the beam axis ---- */ |
| 51 |
/* the y-axis (cross product of x & z axis) is up direction of profile ----- */ |
| 52 |
#1002= IFCAXIS2PLACEMENT3D(#1003,#1004,#1005); |
| 53 |
#1003= IFCCARTESIANPOINT((0.,0.,0.)); |
| 54 |
#1004= IFCDIRECTION((1.,0.,0.)); /* local z-axis co-linear to beam axis */ |
| 55 |
#1005= IFCDIRECTION((0.,1.,0.)); /* local x-axis */ |
| 56 |
#1010= IFCPRODUCTDEFINITIONSHAPE($,$,(#1050,#1020)); |
| 57 |
#1020= IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#1021)); |
| 58 |
#1021= IFCEXTRUDEDAREASOLID(#120,#1030,#1034,2000.); |
| 59 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 60 |
/* extrusion position z = default = (0.,0.,1.),x = default = (1.,0.,0.) */ |
| 61 |
/* translation provides the cardinal point offset -------------------------- */ |
| 62 |
#1030= IFCAXIS2PLACEMENT3D(#1031,$,$); |
| 63 |
#1031= IFCCARTESIANPOINT((-55.0,110.0,0.)); /* defines cardinal point 1 */ |
| 64 |
#1034= IFCDIRECTION((0.,0.,1.)); |
| 65 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 66 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 67 |
#1040= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20QfZsj',$,$,$,(#1000),#1041); |
| 68 |
#1041= IFCMATERIALPROFILESETUSAGE(#111,1,$); |
| 69 |
/* end of enhanced definitions --------------------------------------------- */ |
| 70 |
#1050= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#1051)); |
| 71 |
#1051= IFCPOLYLINE((#1052,#1053)); |
| 72 |
#1052= IFCCARTESIANPOINT((0.,0.,0.)); |
| 73 |
#1053= IFCCARTESIANPOINT((0.,0.,2000.)); |
| 74 |
|
| 75 |
|
| 76 |
/* beam A-2 - beam axis along global x axis -------------------------------- */ |
| 77 |
/* cardinal point = 2 - bottom center */ |
| 78 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 79 |
#1100= IFCBEAMSTANDARDCASE('0juf4qyggSI8rxA20sznsj',$,'A-2','IPE220','Beam',#1101,#1110,'A-2',$); |
| 80 |
#1101= IFCLOCALPLACEMENT(#100025,#1102); |
| 81 |
/* set local placement so that the z-axis is co-linear to the beam axis ---- */ |
| 82 |
/* the y-axis (cross product of x & z axis) is up direction of profile ----- */ |
| 83 |
#1102= IFCAXIS2PLACEMENT3D(#1103,#1104,#1105); |
| 84 |
#1103= IFCCARTESIANPOINT((0.,1500.,0.)); |
| 85 |
#1104= IFCDIRECTION((1.,0.,0.)); /* local z-axis co-linear to beam axis */ |
| 86 |
#1105= IFCDIRECTION((0.,1.,0.)); /* local x-axis */ |
| 87 |
#1110= IFCPRODUCTDEFINITIONSHAPE($,$,(#1150,#1120)); |
| 88 |
#1120= IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#1121)); |
| 89 |
#1121= IFCEXTRUDEDAREASOLID(#120,#1130,#1134,2000.); |
| 90 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 91 |
/* extrusion position z = default = (0.,0.,1.),x = default = (1.,0.,0.) */ |
| 92 |
/* translation provides the cardinal point offset -------------------------- */ |
| 93 |
#1130= IFCAXIS2PLACEMENT3D(#1131,$,$); |
| 94 |
#1131= IFCCARTESIANPOINT((0.,110.0,0.)); /* defines cardinal point 2 */ |
| 95 |
#1134= IFCDIRECTION((0.,0.,1.)); |
| 96 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 97 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 98 |
#1140= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20QgAsj',$,$,$,(#1100),#1141); |
| 99 |
#1141= IFCMATERIALPROFILESETUSAGE(#111,2,$); |
| 100 |
/* end of enhanced definitions --------------------------------------------- */ |
| 101 |
#1150= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#1151)); |
| 102 |
#1151= IFCPOLYLINE((#1152,#1153)); |
| 103 |
#1152= IFCCARTESIANPOINT((0.,0.,0.)); |
| 104 |
#1153= IFCCARTESIANPOINT((0.,0.,2000.)); |
| 105 |
|
| 106 |
|
| 107 |
/* beam A-3 - beam axis along global x axis -------------------------------- */ |
| 108 |
/* cardinal point = 3 - bottom right */ |
| 109 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 110 |
#1200= IFCBEAMSTANDARDCASE('0juf4qyggSI8s4A20sznsj',$,'A-3','IPE220','Beam',#1201,#1210,'A-3',$); |
| 111 |
#1201= IFCLOCALPLACEMENT(#100025,#1202); |
| 112 |
/* set local placement so that the z-axis is co-linear to the beam axis ---- */ |
| 113 |
/* the y-axis (cross product of x & z axis) is up direction of profile ----- */ |
| 114 |
#1202= IFCAXIS2PLACEMENT3D(#1203,#1204,#1205); |
| 115 |
#1203= IFCCARTESIANPOINT((0.,3000.,0.)); |
| 116 |
#1204= IFCDIRECTION((1.,0.,0.)); /* local z-axis co-linear to beam axis */ |
| 117 |
#1205= IFCDIRECTION((0.,1.,0.)); /* local x-axis */ |
| 118 |
#1210= IFCPRODUCTDEFINITIONSHAPE($,$,(#1250,#1220)); |
| 119 |
#1220= IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#1221)); |
| 120 |
#1221= IFCEXTRUDEDAREASOLID(#120,#1230,#1234,2000.); |
| 121 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 122 |
/* extrusion position z = default = (0.,0.,1.),x = default = (1.,0.,0.) */ |
| 123 |
/* translation provides the cardinal point offset -------------------------- */ |
| 124 |
#1230= IFCAXIS2PLACEMENT3D(#1231,$,$); |
| 125 |
#1231= IFCCARTESIANPOINT((55.0,110.0,0.)); /* defines cardinal point 3 */ |
| 126 |
#1234= IFCDIRECTION((0.,0.,1.)); |
| 127 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 128 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 129 |
#1240= IFCRELASSOCIATESMATERIAL('3x0gFSPAr5puQ5WI22xYOm',$,$,$,(#1200),#1241); |
| 130 |
#1241= IFCMATERIALPROFILESETUSAGE(#111,3,$); |
| 131 |
/* end of enhanced definitions --------------------------------------------- */ |
| 132 |
#1250= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#1251)); |
| 133 |
#1251= IFCPOLYLINE((#1252,#1253)); |
| 134 |
#1252= IFCCARTESIANPOINT((0.,0.,0.)); |
| 135 |
#1253= IFCCARTESIANPOINT((0.,0.,2000.)); |
| 136 |
|
| 137 |
|
| 138 |
/* beam A-4 - beam axis along global x axis -------------------------------- */ |
| 139 |
/* cardinal point = 3 - bottom right */ |
| 140 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 141 |
#1300= IFCBEAMSTANDARDCASE('0juf4qyggSI8s4A20sznw6',$,'A-4','IPE220','Beam',#1301,#1310,'A-4',$); |
| 142 |
#1301= IFCLOCALPLACEMENT(#100025,#1302); |
| 143 |
/* set local placement so that the z-axis is co-linear to the beam axis ---- */ |
| 144 |
/* the y-axis (cross product of x & z axis) is up direction of profile ----- */ |
| 145 |
#1302= IFCAXIS2PLACEMENT3D(#1303,#1304,#1305); |
| 146 |
#1303= IFCCARTESIANPOINT((0.,4500.,0.)); |
| 147 |
#1304= IFCDIRECTION((1.,0.,0.)); /* local z-axis co-linear to beam axis */ |
| 148 |
#1305= IFCDIRECTION((0.,1.,0.)); /* local x-axis */ |
| 149 |
#1310= IFCPRODUCTDEFINITIONSHAPE($,$,(#1350,#1320)); |
| 150 |
#1320= IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#1321)); |
| 151 |
#1321= IFCEXTRUDEDAREASOLID(#120,#1330,#1334,2000.); |
| 152 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 153 |
/* extrusion position z = default = (0.,0.,1.),x = default = (1.,0.,0.) */ |
| 154 |
/* translation provides the cardinal point offset -------------------------- */ |
| 155 |
#1330= IFCAXIS2PLACEMENT3D(#1331,$,$); |
| 156 |
#1331= IFCCARTESIANPOINT((-55.0,0.,0.)); /* defines cardinal point 4 */ |
| 157 |
#1334= IFCDIRECTION((0.,0.,1.)); |
| 158 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 159 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 160 |
#1340= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20QOHsj',$,$,$,(#1300),#1341); |
| 161 |
#1341= IFCMATERIALPROFILESETUSAGE(#111,4,$); |
| 162 |
/* end of enhanced definitions --------------------------------------------- */ |
| 163 |
#1350= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#1351)); |
| 164 |
#1351= IFCPOLYLINE((#1352,#1353)); |
| 165 |
#1352= IFCCARTESIANPOINT((0.,0.,0.)); |
| 166 |
#1353= IFCCARTESIANPOINT((0.,0.,2000.)); |
| 167 |
|
| 168 |
|
| 169 |
/* beam A-5 - beam axis along global x axis -------------------------------- */ |
| 170 |
/* cardinal point = 5 - mid-depth center */ |
| 171 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 172 |
#1400= IFCBEAMSTANDARDCASE('0juf4qyggSI8rxA20Qwnab',$,'A-5','IPE220','Beam',#1401,#1410,'A-5',$); |
| 173 |
#1401= IFCLOCALPLACEMENT(#100025,#1402); |
| 174 |
/* set local placement so that the z-axis is co-linear to the beam axis ---- */ |
| 175 |
/* the y-axis (cross product of x & z axis) is up direction of profile ----- */ |
| 176 |
#1402= IFCAXIS2PLACEMENT3D(#1403,#1404,#1405); |
| 177 |
#1403= IFCCARTESIANPOINT((0.,6000.,0.)); |
| 178 |
#1404= IFCDIRECTION((1.,0.,0.)); /* local z-axis co-linear to beam axis */ |
| 179 |
#1405= IFCDIRECTION((0.,1.,0.)); /* local x-axis */ |
| 180 |
#1410= IFCPRODUCTDEFINITIONSHAPE($,$,(#1450,#1420)); |
| 181 |
#1420= IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#1421)); |
| 182 |
#1421= IFCEXTRUDEDAREASOLID(#120,#1430,#1434,2000.); |
| 183 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 184 |
/* extrusion position z = default = (0.,0.,1.),x = default = (1.,0.,0.) */ |
| 185 |
/* translation provides the cardinal point offset -------------------------- */ |
| 186 |
#1430= IFCAXIS2PLACEMENT3D(#1431,$,$); |
| 187 |
#1431= IFCCARTESIANPOINT((0.,0.,0.)); /* defines cardinal point 5 */ |
| 188 |
#1434= IFCDIRECTION((0.,0.,1.)); |
| 189 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 190 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 191 |
#1440= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20QRLsj',$,$,$,(#1400),#1441); |
| 192 |
#1441= IFCMATERIALPROFILESETUSAGE(#111,5,$); |
| 193 |
/* end of enhanced definitions --------------------------------------------- */ |
| 194 |
#1450= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#1451)); |
| 195 |
#1451= IFCPOLYLINE((#1452,#1453)); |
| 196 |
#1452= IFCCARTESIANPOINT((0.,0.,0.)); |
| 197 |
#1453= IFCCARTESIANPOINT((0.,0.,2000.)); |
| 198 |
|
| 199 |
|
| 200 |
/* beam A-6 - beam axis along global x axis -------------------------------- */ |
| 201 |
/* cardinal point = 6 - mid-depth right */ |
| 202 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 203 |
#1500= IFCBEAMSTANDARDCASE('0juf4qyggSI8rxA20Qwng1',$,'A-6','IPE220','Beam',#1501,#1510,'A-6',$); |
| 204 |
#1501= IFCLOCALPLACEMENT(#100025,#1502); |
| 205 |
/* set local placement so that the z-axis is co-linear to the beam axis ---- */ |
| 206 |
/* the y-axis (cross product of x & z axis) is up direction of profile ----- */ |
| 207 |
#1502= IFCAXIS2PLACEMENT3D(#1503,#1504,#1505); |
| 208 |
#1503= IFCCARTESIANPOINT((0.,7500.,0.)); |
| 209 |
#1504= IFCDIRECTION((1.,0.,0.)); /* local z-axis co-linear to beam axis */ |
| 210 |
#1505= IFCDIRECTION((0.,1.,0.)); /* local x-axis */ |
| 211 |
#1510= IFCPRODUCTDEFINITIONSHAPE($,$,(#1550,#1520)); |
| 212 |
#1520= IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#1521)); |
| 213 |
#1521= IFCEXTRUDEDAREASOLID(#120,#1530,#1534,2000.); |
| 214 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 215 |
/* extrusion position z = default = (0.,0.,1.),x = default = (1.,0.,0.) */ |
| 216 |
/* translation provides the cardinal point offset -------------------------- */ |
| 217 |
#1530= IFCAXIS2PLACEMENT3D(#1531,$,$); |
| 218 |
#1531= IFCCARTESIANPOINT((55.0,0.,0.)); /* defines cardinal point 6 */ |
| 219 |
#1534= IFCDIRECTION((0.,0.,1.)); |
| 220 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 221 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 222 |
#1540= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20QMmsj',$,$,$,(#1500),#1541); |
| 223 |
#1541= IFCMATERIALPROFILESETUSAGE(#111,6,$); |
| 224 |
/* end of enhanced definitions --------------------------------------------- */ |
| 225 |
#1550= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#1551)); |
| 226 |
#1551= IFCPOLYLINE((#1552,#1553)); |
| 227 |
#1552= IFCCARTESIANPOINT((0.,0.,0.)); |
| 228 |
#1553= IFCCARTESIANPOINT((0.,0.,2000.)); |
| 229 |
|
| 230 |
|
| 231 |
/* beam A-7 - beam axis along global x axis -------------------------------- */ |
| 232 |
/* cardinal point = 7 - top left */ |
| 233 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 234 |
#1600= IFCBEAMSTANDARDCASE('0juf4qyggSI8rxA20Qwn3s',$,'A-7','IPE220','Beam',#1601,#1610,'A-7',$); |
| 235 |
#1601= IFCLOCALPLACEMENT(#100025,#1602); |
| 236 |
/* set local placement so that the z-axis is co-linear to the beam axis ---- */ |
| 237 |
/* the y-axis (cross product of x & z axis) is up direction of profile ----- */ |
| 238 |
#1602= IFCAXIS2PLACEMENT3D(#1603,#1604,#1605); |
| 239 |
#1603= IFCCARTESIANPOINT((0.,9000.,0.)); |
| 240 |
#1604= IFCDIRECTION((1.,0.,0.)); /* local z-axis co-linear to beam axis */ |
| 241 |
#1605= IFCDIRECTION((0.,1.,0.)); /* local x-axis */ |
| 242 |
#1610= IFCPRODUCTDEFINITIONSHAPE($,$,(#1650,#1620)); |
| 243 |
#1620= IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#1621)); |
| 244 |
#1621= IFCEXTRUDEDAREASOLID(#120,#1630,#1634,2000.); |
| 245 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 246 |
/* extrusion position z = default = (0.,0.,1.),x = default = (1.,0.,0.) */ |
| 247 |
/* translation provides the cardinal point offset -------------------------- */ |
| 248 |
#1630= IFCAXIS2PLACEMENT3D(#1631,$,$); |
| 249 |
#1631= IFCCARTESIANPOINT((-55.0,-110.0,0.)); /* defines cardinal point 7 */ |
| 250 |
#1634= IFCDIRECTION((0.,0.,1.)); |
| 251 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 252 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 253 |
#1640= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20Qh4sj',$,$,$,(#1600),#1641); |
| 254 |
#1641= IFCMATERIALPROFILESETUSAGE(#111,7,$); |
| 255 |
/* end of enhanced definitions --------------------------------------------- */ |
| 256 |
#1650= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#1651)); |
| 257 |
#1651= IFCPOLYLINE((#1652,#1653)); |
| 258 |
#1652= IFCCARTESIANPOINT((0.,0.,0.)); |
| 259 |
#1653= IFCCARTESIANPOINT((0.,0.,2000.)); |
| 260 |
|
| 261 |
|
| 262 |
/* beam A-8 - beam axis along global x axis -------------------------------- */ |
| 263 |
/* cardinal point = 8 - top center */ |
| 264 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 265 |
#1700= IFCBEAMSTANDARDCASE('0juf4qyggSI8rxA20Qwnlq',$,'A-8','IPE220','Beam',#1701,#1710,'A-8',$); |
| 266 |
#1701= IFCLOCALPLACEMENT(#100025,#1702); |
| 267 |
/* set local placement so that the z-axis is co-linear to the beam axis ---- */ |
| 268 |
/* the y-axis (cross product of x & z axis) is up direction of profile ----- */ |
| 269 |
#1702= IFCAXIS2PLACEMENT3D(#1703,#1704,#1705); |
| 270 |
#1703= IFCCARTESIANPOINT((0.,10500.,0.)); |
| 271 |
#1704= IFCDIRECTION((1.,0.,0.)); /* local z-axis co-linear to beam axis */ |
| 272 |
#1705= IFCDIRECTION((0.,1.,0.)); /* local x-axis */ |
| 273 |
#1710= IFCPRODUCTDEFINITIONSHAPE($,$,(#1750,#1720)); |
| 274 |
#1720= IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#1721)); |
| 275 |
#1721= IFCEXTRUDEDAREASOLID(#120,#1730,#1734,2000.); |
| 276 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 277 |
/* extrusion position z = default = (0.,0.,1.),x = default = (1.,0.,0.) */ |
| 278 |
/* translation provides the cardinal point offset -------------------------- */ |
| 279 |
#1730= IFCAXIS2PLACEMENT3D(#1731,$,$); |
| 280 |
#1731= IFCCARTESIANPOINT((0.,-110.0,0.)); /* defines cardinal point 7 */ |
| 281 |
#1734= IFCDIRECTION((0.,0.,1.)); |
| 282 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 283 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 284 |
#1740= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20QwKsj',$,$,$,(#1700),#1741); |
| 285 |
#1741= IFCMATERIALPROFILESETUSAGE(#111,8,$); |
| 286 |
/* end of enhanced definitions --------------------------------------------- */ |
| 287 |
#1750= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#1751)); |
| 288 |
#1751= IFCPOLYLINE((#1752,#1753)); |
| 289 |
#1752= IFCCARTESIANPOINT((0.,0.,0.)); |
| 290 |
#1753= IFCCARTESIANPOINT((0.,0.,2000.)); |
| 291 |
|
| 292 |
|
| 293 |
/* beam A-9 - beam axis along global x axis -------------------------------- */ |
| 294 |
/* cardinal point = 9 - top right */ |
| 295 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 296 |
#1800= IFCBEAMSTANDARDCASE('0juf4qyggSI8s4A20sznrt',$,'A-9','IPE220','Beam',#1801,#1810,'A-9',$); |
| 297 |
#1801= IFCLOCALPLACEMENT(#100025,#1802); |
| 298 |
/* set local placement so that the z-axis is co-linear to the beam axis ---- */ |
| 299 |
/* the y-axis (cross product of x & z axis) is up direction of profile ----- */ |
| 300 |
#1802= IFCAXIS2PLACEMENT3D(#1803,#1804,#1805); |
| 301 |
#1803= IFCCARTESIANPOINT((0.,12000.,0.)); |
| 302 |
#1804= IFCDIRECTION((1.,0.,0.)); /* local z-axis co-linear to beam axis */ |
| 303 |
#1805= IFCDIRECTION((0.,1.,0.)); /* local x-axis */ |
| 304 |
#1810= IFCPRODUCTDEFINITIONSHAPE($,$,(#1850,#1820)); |
| 305 |
#1820= IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#1821)); |
| 306 |
#1821= IFCEXTRUDEDAREASOLID(#120,#1830,#1834,2000.); |
| 307 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 308 |
/* extrusion position z = default = (0.,0.,1.),x = default = (1.,0.,0.) */ |
| 309 |
/* translation provides the cardinal point offset -------------------------- */ |
| 310 |
#1830= IFCAXIS2PLACEMENT3D(#1831,$,$); |
| 311 |
#1831= IFCCARTESIANPOINT((55.0,-110.0,0.)); /* defines cardinal point 9 */ |
| 312 |
#1834= IFCDIRECTION((0.,0.,1.)); |
| 313 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 314 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 315 |
#1840= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20QJksj',$,$,$,(#1800),#1841); |
| 316 |
#1841= IFCMATERIALPROFILESETUSAGE(#111,9,$); |
| 317 |
/* end of enhanced definitions --------------------------------------------- */ |
| 318 |
#1850= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#1851)); |
| 319 |
#1851= IFCPOLYLINE((#1852,#1853)); |
| 320 |
#1852= IFCCARTESIANPOINT((0.,0.,0.)); |
| 321 |
#1853= IFCCARTESIANPOINT((0.,0.,2000.)); |
| 322 |
|
| 323 |
|
| 324 |
|
| 325 |
/* beam B-1 - beam axis along global x axis -------------------------------- */ |
| 326 |
/* cardinal point = 1 - bottom left */ |
| 327 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 328 |
#2000=IFCBEAMSTANDARDCASE('3QbcAsYoB7Hvx$4VHzijYi',$,'B-1','1/2IPE300','Beam',#2001,#2010,'B-1',$); |
| 329 |
#2001=IFCLOCALPLACEMENT(#100025,#2002); |
| 330 |
/* set local placement so that the z-axis is co-linear to the beam axis ---- */ |
| 331 |
/* the y-axis (cross product of x & z axis) is up direction of profile ----- */ |
| 332 |
#2002=IFCAXIS2PLACEMENT3D(#2003,#2004,#2005); |
| 333 |
#2003=IFCCARTESIANPOINT((0.,0.,1500.)); |
| 334 |
#2004=IFCDIRECTION((0.98,0.081,0.182)); /* local z-axis co-linear to beam axis */ |
| 335 |
#2005=IFCDIRECTION((-0.0001,0.9138,-0.40616)); /* local x-axis */ |
| 336 |
#2010=IFCPRODUCTDEFINITIONSHAPE($,$,(#2050,#2020)); |
| 337 |
#2020=IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#2021)); |
| 338 |
#2021=IFCEXTRUDEDAREASOLID(#220,#2030,#2034,3000.); |
| 339 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 340 |
/* translation provides the cardinal point offset -------------------------- */ |
| 341 |
#2030=IFCAXIS2PLACEMENT3D(#2031,$,$); |
| 342 |
#2031=IFCCARTESIANPOINT((-75.0,75.0,0.)); /* defines cardinal point 1 */ |
| 343 |
#2034=IFCDIRECTION((0.,0.,1.)); |
| 344 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 345 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 346 |
#2040= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20QbFsj',$,$,$,(#2000),#2041); |
| 347 |
#2041= IFCMATERIALPROFILESETUSAGE(#211,1,$); |
| 348 |
/* end of enhanced definitions --------------------------------------------- */ |
| 349 |
#2050= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#2051)); |
| 350 |
#2051= IFCPOLYLINE((#2052,#2053)); |
| 351 |
#2052= IFCCARTESIANPOINT((0.,0.,0.)); |
| 352 |
#2053= IFCCARTESIANPOINT((0.,0.,3000.)); |
| 353 |
|
| 354 |
|
| 355 |
/* beam B-2 - beam axis along global x axis -------------------------------- */ |
| 356 |
/* cardinal point = 2 - bottom center */ |
| 357 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 358 |
#2100=IFCBEAMSTANDARDCASE('3Qb5gsYoB7Hvx$4VHzijYi',$,'B-2','1/2IPE300','Beam',#2101,#2110,'B-2',$); |
| 359 |
#2101=IFCLOCALPLACEMENT(#100025,#2102); |
| 360 |
/* set local placement so that the z-axis is co-linear to the beam axis ---- */ |
| 361 |
/* the y-axis (cross product of x & z axis) is up direction of profile ----- */ |
| 362 |
#2102=IFCAXIS2PLACEMENT3D(#2103,#2104,#2105); |
| 363 |
#2103=IFCCARTESIANPOINT((0.,1500.,1500.)); |
| 364 |
#2104=IFCDIRECTION((0.98,0.081,0.182)); /* local z-axis co-linear to beam axis */ |
| 365 |
#2105=IFCDIRECTION((-0.0001,0.9138,-0.40616)); /* local x-axis */ |
| 366 |
#2110=IFCPRODUCTDEFINITIONSHAPE($,$,(#2150,#2120)); |
| 367 |
#2120=IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#2121)); |
| 368 |
#2121=IFCEXTRUDEDAREASOLID(#220,#2130,#2134,3000.); |
| 369 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 370 |
/* translation provides the cardinal point offset -------------------------- */ |
| 371 |
#2130=IFCAXIS2PLACEMENT3D(#2131,$,$); |
| 372 |
#2131=IFCCARTESIANPOINT((0.,75.0,0.)); /* defines cardinal point 2 */ |
| 373 |
#2134=IFCDIRECTION((0.,0.,1.)); |
| 374 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 375 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 376 |
#2140= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20Qqlsj',$,$,$,(#2100),#2141); |
| 377 |
#2141= IFCMATERIALPROFILESETUSAGE(#211,2,$); |
| 378 |
/* end of enhanced definitions --------------------------------------------- */ |
| 379 |
#2150= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#2151)); |
| 380 |
#2151= IFCPOLYLINE((#2152,#2153)); |
| 381 |
#2152= IFCCARTESIANPOINT((0.,0.,0.)); |
| 382 |
#2153= IFCCARTESIANPOINT((0.,0.,3000.)); |
| 383 |
|
| 384 |
|
| 385 |
/* beam B-3 - beam axis along global x axis -------------------------------- */ |
| 386 |
/* cardinal point = 3 - bottom right */ |
| 387 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 388 |
#2200=IFCBEAMSTANDARDCASE('3QbcAsYsg7Hvx$4VHzijYi',$,'B-3','1/2IPE300','Beam',#2201,#2210,'B-3',$); |
| 389 |
#2201=IFCLOCALPLACEMENT(#100025,#2202); |
| 390 |
#2202=IFCAXIS2PLACEMENT3D(#2203,#2204,#2205); |
| 391 |
#2203=IFCCARTESIANPOINT((0.,3000.,1500.)); |
| 392 |
#2204=IFCDIRECTION((0.98,0.081,0.182)); /* local z-axis co-linear to beam axis */ |
| 393 |
#2205=IFCDIRECTION((-0.0001,0.9138,-0.40616)); /* local x-axis ---------------------- */ |
| 394 |
#2210=IFCPRODUCTDEFINITIONSHAPE($,$,(#2250,#2220)); |
| 395 |
#2220=IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#2221)); |
| 396 |
#2221=IFCEXTRUDEDAREASOLID(#220,#2230,#2234,3000.); |
| 397 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 398 |
/* translation provides the cardinal point offset -------------------------- */ |
| 399 |
#2230=IFCAXIS2PLACEMENT3D(#2231,$,$); |
| 400 |
#2231=IFCCARTESIANPOINT((75.0,75.0,0.)); /* defines cardinal point 3 */ |
| 401 |
#2234=IFCDIRECTION((0.,0.,1.)); |
| 402 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 403 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 404 |
#2240= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20Q7isj',$,$,$,(#2200),#2241); |
| 405 |
#2241= IFCMATERIALPROFILESETUSAGE(#211,3,$); |
| 406 |
/* end of enhanced definitions --------------------------------------------- */ |
| 407 |
#2250= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#2251)); |
| 408 |
#2251= IFCPOLYLINE((#2252,#2253)); |
| 409 |
#2252= IFCCARTESIANPOINT((0.,0.,0.)); |
| 410 |
#2253= IFCCARTESIANPOINT((0.,0.,3000.)); |
| 411 |
|
| 412 |
|
| 413 |
/* beam B-4 - beam axis along global x axis -------------------------------- */ |
| 414 |
/* cardinal point = 4 - mid-depth left */ |
| 415 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 416 |
#2300=IFCBEAMSTANDARDCASE('3QbcAsYsg7Hvx$4VHzijGT',$,'B-4','1/2IPE300','Beam',#2301,#2310,'B-4',$); |
| 417 |
#2301=IFCLOCALPLACEMENT(#100025,#2302); |
| 418 |
#2302=IFCAXIS2PLACEMENT3D(#2303,#2304,#2305); |
| 419 |
#2303=IFCCARTESIANPOINT((0.,4500.,1500.)); |
| 420 |
#2304=IFCDIRECTION((0.98,0.081,0.182)); /* local z-axis co-linear to beam axis */ |
| 421 |
#2305=IFCDIRECTION((-0.0001,0.9138,-0.40616)); /* local x-axis ---------------------- */ |
| 422 |
#2310=IFCPRODUCTDEFINITIONSHAPE($,$,(#2350,#2320)); |
| 423 |
#2320=IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#2321)); |
| 424 |
#2321=IFCEXTRUDEDAREASOLID(#220,#2330,#2334,3000.); |
| 425 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 426 |
/* translation provides the cardinal point offset -------------------------- */ |
| 427 |
#2330=IFCAXIS2PLACEMENT3D(#2331,$,$); |
| 428 |
#2331=IFCCARTESIANPOINT((-75.0,0.,0.)); /* defines cardinal point 4 */ |
| 429 |
#2334=IFCDIRECTION((0.,0.,1.)); |
| 430 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 431 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 432 |
#2340= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20Q4nsj',$,$,$,(#2300),#2341); |
| 433 |
#2341= IFCMATERIALPROFILESETUSAGE(#211,4,$); |
| 434 |
/* end of enhanced definitions --------------------------------------------- */ |
| 435 |
#2350= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#2351)); |
| 436 |
#2351= IFCPOLYLINE((#2352,#2353)); |
| 437 |
#2352= IFCCARTESIANPOINT((0.,0.,0.)); |
| 438 |
#2353= IFCCARTESIANPOINT((0.,0.,3000.)); |
| 439 |
|
| 440 |
|
| 441 |
/* beam B-5 - beam axis along global x axis -------------------------------- */ |
| 442 |
/* cardinal point = 5 - mid-depth centre */ |
| 443 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 444 |
#2400=IFCBEAMSTANDARDCASE('3QbcAsYsg7Hvx$4VHzijdF',$,'B-5','1/2IPE300','Beam',#2401,#2410,'B-5',$); |
| 445 |
#2401=IFCLOCALPLACEMENT(#100025,#2402); |
| 446 |
#2402=IFCAXIS2PLACEMENT3D(#2403,#2404,#2405); |
| 447 |
#2403=IFCCARTESIANPOINT((0.,6000.,1500.)); |
| 448 |
#2404=IFCDIRECTION((0.98,0.081,0.182)); /* local z-axis co-linear to beam axis */ |
| 449 |
#2405=IFCDIRECTION((-0.0001,0.9138,-0.40616)); /* local x-axis ---------------------- */ |
| 450 |
#2410=IFCPRODUCTDEFINITIONSHAPE($,$,(#2450,#2420)); |
| 451 |
#2420=IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#2421)); |
| 452 |
#2421=IFCEXTRUDEDAREASOLID(#220,#2430,#2434,3000.); |
| 453 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 454 |
/* translation provides the cardinal point offset -------------------------- */ |
| 455 |
#2430=IFCAXIS2PLACEMENT3D(#2431,$,$); |
| 456 |
#2431=IFCCARTESIANPOINT((0.,0.,0.)); /* defines cardinal point 5 */ |
| 457 |
#2434=IFCDIRECTION((0.,0.,1.)); |
| 458 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 459 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 460 |
#2440= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20Q41sj',$,$,$,(#2400),#2441); |
| 461 |
#2441= IFCMATERIALPROFILESETUSAGE(#211,5,$); |
| 462 |
/* end of enhanced definitions --------------------------------------------- */ |
| 463 |
#2450= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#2451)); |
| 464 |
#2451= IFCPOLYLINE((#2452,#2453)); |
| 465 |
#2452= IFCCARTESIANPOINT((0.,0.,0.)); |
| 466 |
#2453= IFCCARTESIANPOINT((0.,0.,3000.)); |
| 467 |
|
| 468 |
|
| 469 |
/* beam B-6 - beam axis along global x axis -------------------------------- */ |
| 470 |
/* cardinal point = 6 - mid-depth right */ |
| 471 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 472 |
#2500=IFCBEAMSTANDARDCASE('3QbcAsYsg7Hvx$4VHzij3V',$,'B-6','1/2IPE300','Beam',#2501,#2510,'B-6',$); |
| 473 |
#2501=IFCLOCALPLACEMENT(#100025,#2502); |
| 474 |
#2502=IFCAXIS2PLACEMENT3D(#2503,#2504,#2505); |
| 475 |
#2503=IFCCARTESIANPOINT((0.,7500.,1500.)); |
| 476 |
#2504=IFCDIRECTION((0.98,0.081,0.182)); /* local z-axis co-linear to beam axis */ |
| 477 |
#2505=IFCDIRECTION((-0.0001,0.9138,-0.40616)); /* local x-axis ---------------------- */ |
| 478 |
#2510=IFCPRODUCTDEFINITIONSHAPE($,$,(#2550,#2520)); |
| 479 |
#2520=IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#2521)); |
| 480 |
#2521=IFCEXTRUDEDAREASOLID(#220,#2530,#2534,3000.); |
| 481 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 482 |
/* translation provides the cardinal point offset -------------------------- */ |
| 483 |
#2530=IFCAXIS2PLACEMENT3D(#2531,$,$); |
| 484 |
#2531=IFCCARTESIANPOINT((75.,0.,0.)); /* defines cardinal point 6 */ |
| 485 |
#2534=IFCDIRECTION((0.,0.,1.)); |
| 486 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 487 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 488 |
#2540= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20QURsj',$,$,$,(#2500),#2541); |
| 489 |
#2541= IFCMATERIALPROFILESETUSAGE(#211,6,$); |
| 490 |
/* end of enhanced definitions --------------------------------------------- */ |
| 491 |
#2550= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#2551)); |
| 492 |
#2551= IFCPOLYLINE((#2552,#2553)); |
| 493 |
#2552= IFCCARTESIANPOINT((0.,0.,0.)); |
| 494 |
#2553= IFCCARTESIANPOINT((0.,0.,3000.)); |
| 495 |
|
| 496 |
|
| 497 |
/* beam B-7 - beam axis along global x axis -------------------------------- */ |
| 498 |
/* cardinal point = 7 - top left */ |
| 499 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 500 |
#2600=IFCBEAMSTANDARDCASE('3QbcAsYsg7Hvx$4VHzij71',$,'B-7','1/2IPE300','Beam',#2601,#2610,'B-7',$); |
| 501 |
#2601=IFCLOCALPLACEMENT(#100025,#2602); |
| 502 |
#2602=IFCAXIS2PLACEMENT3D(#2603,#2604,#2605); |
| 503 |
#2603=IFCCARTESIANPOINT((0.,9000.,1500.)); |
| 504 |
#2604=IFCDIRECTION((0.98,0.081,0.182)); /* local z-axis co-linear to beam axis */ |
| 505 |
#2605=IFCDIRECTION((-0.0001,0.9138,-0.40616)); /* local x-axis ---------------------- */ |
| 506 |
#2610=IFCPRODUCTDEFINITIONSHAPE($,$,(#2650,#2620)); |
| 507 |
#2620=IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#2621)); |
| 508 |
#2621=IFCEXTRUDEDAREASOLID(#220,#2630,#2634,3000.); |
| 509 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 510 |
/* translation provides the cardinal point offset -------------------------- */ |
| 511 |
#2630=IFCAXIS2PLACEMENT3D(#2631,$,$); |
| 512 |
#2631=IFCCARTESIANPOINT((-75.0,-75.0,0.)); /* defines cardinal point 7 - */ |
| 513 |
#2634=IFCDIRECTION((0.,0.,1.)); |
| 514 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 515 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 516 |
#2640= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20Qw9sj',$,$,$,(#2600),#2641); |
| 517 |
#2641= IFCMATERIALPROFILESETUSAGE(#211,7,$); |
| 518 |
/* end of enhanced definitions --------------------------------------------- */ |
| 519 |
#2650= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#2651)); |
| 520 |
#2651= IFCPOLYLINE((#2652,#2653)); |
| 521 |
#2652= IFCCARTESIANPOINT((0.,0.,0.)); |
| 522 |
#2653= IFCCARTESIANPOINT((0.,0.,3000.)); |
| 523 |
|
| 524 |
|
| 525 |
/* beam B-8 - beam axis along global x axis -------------------------------- */ |
| 526 |
/* cardinal point = 3 - top center */ |
| 527 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 528 |
#2700=IFCBEAMSTANDARDCASE('3QbcAsYsg7Hvx$4VHzijvb',$,'B-8','1/2IPE300','Beam',#2701,#2710,'B-8',$); |
| 529 |
#2701=IFCLOCALPLACEMENT(#100025,#2702); |
| 530 |
#2702=IFCAXIS2PLACEMENT3D(#2703,#2704,#2705); |
| 531 |
#2703=IFCCARTESIANPOINT((0.,10500.,1500.)); |
| 532 |
#2704=IFCDIRECTION((0.98,0.081,0.182)); /* local z-axis co-linear to beam axis */ |
| 533 |
#2705=IFCDIRECTION((-0.0001,0.9138,-0.40616)); /* local x-axis ---------------------- */ |
| 534 |
#2710=IFCPRODUCTDEFINITIONSHAPE($,$,(#2750,#2720)); |
| 535 |
#2720=IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#2721)); |
| 536 |
#2721=IFCEXTRUDEDAREASOLID(#220,#2730,#2734,3000.); |
| 537 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 538 |
/* translation provides the cardinal point offset -------------------------- */ |
| 539 |
#2730=IFCAXIS2PLACEMENT3D(#2731,$,$); |
| 540 |
#2731=IFCCARTESIANPOINT((0.,-75.0,0.)); /* defines cardinal point 8 */ |
| 541 |
#2734=IFCDIRECTION((0.,0.,1.)); |
| 542 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 543 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 544 |
#2740= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20QOcsj',$,$,$,(#2700),#2741); |
| 545 |
#2741= IFCMATERIALPROFILESETUSAGE(#211,8,$); |
| 546 |
/* end of enhanced definitions --------------------------------------------- */ |
| 547 |
#2750= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#2751)); |
| 548 |
#2751= IFCPOLYLINE((#2752,#2753)); |
| 549 |
#2752= IFCCARTESIANPOINT((0.,0.,0.)); |
| 550 |
#2753= IFCCARTESIANPOINT((0.,0.,3000.)); |
| 551 |
|
| 552 |
|
| 553 |
/* beam B-9 - beam axis along global x axis -------------------------------- */ |
| 554 |
/* cardinal point = 9 - top right */ |
| 555 |
/* enhanced definitions introduced in IFC2x4 - IfcBeamStandardCase --------- */ |
| 556 |
#2800=IFCBEAMSTANDARDCASE('3QbcAsYsg7Hvx$4VHzijp1',$,'B-9','1/2IPE300','Beam',#2801,#2810,'B-9',$); |
| 557 |
#2801=IFCLOCALPLACEMENT(#100025,#2802); |
| 558 |
#2802=IFCAXIS2PLACEMENT3D(#2803,#2804,#2805); |
| 559 |
#2803=IFCCARTESIANPOINT((0.,12000.,1500.)); |
| 560 |
#2804=IFCDIRECTION((0.98,0.081,0.182)); /* local z-axis co-linear to beam axis */ |
| 561 |
#2805=IFCDIRECTION((-0.0001,0.9138,-0.40616)); /* local x-axis ---------------------- */ |
| 562 |
#2810=IFCPRODUCTDEFINITIONSHAPE($,$,(#2850,#2820)); |
| 563 |
#2820=IFCSHAPEREPRESENTATION(#100011,'Body','SweptSolid',(#2821)); |
| 564 |
#2821=IFCEXTRUDEDAREASOLID(#220,#2830,#2834,3000.); |
| 565 |
/* extrusion body is placed with no rotation inside local placement -------- */ |
| 566 |
/* translation provides the cardinal point offset -------------------------- */ |
| 567 |
#2830=IFCAXIS2PLACEMENT3D(#2831,$,$); |
| 568 |
#2831=IFCCARTESIANPOINT((75.0,-75.0,0.)); /* defines cardinal point 9 - */ |
| 569 |
#2834=IFCDIRECTION((0.,0.,1.)); |
| 570 |
/* enhanced definitions introduced in IFC2x4 ------------------------------- */ |
| 571 |
/* assignment of material and cardinal point to the beam occurrence */ |
| 572 |
#2840= IFCRELASSOCIATESMATERIAL('0juf4qyggSstrxA20Qw6sj',$,$,$,(#2800),#2841); |
| 573 |
#2841= IFCMATERIALPROFILESETUSAGE(#211,9,$); |
| 574 |
/* end of enhanced definitions --------------------------------------------- */ |
| 575 |
#2850= IFCSHAPEREPRESENTATION(#100011,'Axis','Curve3D',(#2851)); |
| 576 |
#2851= IFCPOLYLINE((#2852,#2853)); |
| 577 |
#2852= IFCCARTESIANPOINT((0.,0.,0.)); |
| 578 |
#2853= IFCCARTESIANPOINT((0.,0.,3000.)); |
| 579 |
|
| 580 |
|
| 581 |
#90000=IFCRELCONTAINEDINSPATIALSTRUCTURE('2aq$Crcs_xJvtg9lbm2bMM',$,'Physical model',$,(#1000,#1100,#1200,#1300,#1400,#1500,#1600,#1700,#1800,#2000,#2100,#2200,#2300,#2400,#2500,#2600,#2700,#2800),#100023); |
| 582 |
#90010=IFCRELDEFINESBYTYPE('2aq$Crcs_xJvd69lbm2bMM',$,'beam typing',$,(#1000,#1100,#1200,#1300,#1400,#1500,#1600,#1700,#1800),#100); |
| 583 |
#90020=IFCRELDEFINESBYTYPE('2aq$Crcs_xJvN69lbm2bMM',$,'beam typing',$,(#2000,#2100,#2200,#2300,#2400,#2500,#2600,#2700,#2800),#200); |
| 584 |
|
| 585 |
|
| 586 |
/* --------------------------------------------------------------------------------------------- */ |
| 587 |
/* general entities required for all IFC data sets, defining the context for the exchange ------ */ |
| 588 |
#100001= IFCPERSON($,'Liebich',$,$,$,$,$,$); |
| 589 |
#100002= IFCORGANIZATION($,'AEC3',$,$,$); |
| 590 |
#100003= IFCPERSONANDORGANIZATION(#100001,#100002,$); |
| 591 |
#100004= IFCAPPLICATION(#100002,'Unknown','SDS/2 Version 6.300 on NT','Unknown'); |
| 592 |
#100005= IFCOWNERHISTORY(#100003,#100004,$,.NOTDEFINED.,$,$,$,1320688800); |
| 593 |
#100010= IFCPROJECT('32DJhIf6esIeAOIlD4Xw2m',#100005,'Test model for beam cardinal points',$,$,$,$,(#100011),#100060); |
| 594 |
#100011= IFCGEOMETRICREPRESENTATIONCONTEXT($,'Model',3,1.0E-5,#100040,$); |
| 595 |
#100020= IFCSITE('10cTefjFQoJexBQrSqFcWZ',$,'Site',$,$,#100022,$,$,.ELEMENT.,$,$,$,$,$); |
| 596 |
#100021= IFCRELAGGREGATES('0ZdtoJM$VsHBqD_feRfxAg',$,$,$,#100010,(#100020)); |
| 597 |
#100022= IFCLOCALPLACEMENT($,#100040); |
| 598 |
#100023= IFCBUILDING('0Xwup04AK2G8Mt0WNZVy_Z',$,'Building',$,$,#100025,$,$,.ELEMENT.,$,$,$); |
| 599 |
#100024= IFCRELAGGREGATES('1FUTCayKJbIQqDNnZzXu07',$,$,$,#100020,(#100023)); |
| 600 |
#100025= IFCLOCALPLACEMENT(#100022,#100040); |
| 601 |
#100040= IFCAXIS2PLACEMENT3D(#100041,#100044,#100042); |
| 602 |
#100041= IFCCARTESIANPOINT((0.,0.,0.)); |
| 603 |
#100042= IFCDIRECTION((1.,0.,0.)); |
| 604 |
#100043= IFCDIRECTION((0.,1.,0.)); |
| 605 |
#100044= IFCDIRECTION((0.,0.,1.)); |
| 606 |
#100048= IFCDIRECTION((0.,0.,-1.)); |
| 607 |
#100059= IFCCARTESIANTRANSFORMATIONOPERATOR3D($,$,#100041,1.,$); |
| 608 |
#100060= IFCUNITASSIGNMENT((#100061,#100062,#100063,#100064,#100065,#100066,#100067,#100068)); |
| 609 |
#100061= IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); |
| 610 |
#100062= IFCSIUNIT(*,.PLANEANGLEUNIT.,$,.RADIAN.); |
| 611 |
#100063= IFCSIUNIT(*,.MASSUNIT.,.KILO.,.GRAM.); |
| 612 |
#100064= IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); |
| 613 |
#100065= IFCSIUNIT(*,.AREAUNIT.,$,.SQUARE_METRE.); |
| 614 |
#100066= IFCSIUNIT(*,.PRESSUREUNIT.,$,.PASCAL.); |
| 615 |
#100067= IFCSIUNIT(*,.FORCEUNIT.,$,.NEWTON.); |
| 616 |
#100068= IFCSIUNIT(*,.THERMODYNAMICTEMPERATUREUNIT.,$,.DEGREE_CELSIUS.); |
| 617 |
|
| 618 |
#100069= IFCRELDECLARES('3P3zL0KYv4C9D9h3OX$dey',$,$,$,#100010,(#100,#200)); |
| 619 |
|
| 620 |
ENDSEC; |
| 621 |
|
| 622 |
END-ISO-10303-21; |