| 1 |
Creating Walls |
| 2 |
-------------- |
| 3 |
|
| 4 |
Walls are fundamental elements in any building design. Bonsai provides powerful tools for creating and manipulating wall elements. |
| 5 |
This section will guide you through the process of creating standalone walls, multiple connected walls, and joining walls using various techniques. |
| 6 |
|
| 7 |
By following these steps and utilizing the various tools provided by Bonsai, |
| 8 |
you can efficiently create, modify, and join walls to form complex building layouts. |
| 9 |
Remember to use snapping and alignment tools to ensure precision in your model. |
| 10 |
|
| 11 |
Creating a Standalone Wall |
| 12 |
^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| 13 |
|
| 14 |
1. Open an empty model (without predefined types). |
| 15 |
2. Click on the wall icon in the toolbar. The top bar will display "[No IfcWallType Found] | Name [TYPEX] | + Add IfcWallType". |
| 16 |
3. Edit [TYPEX] to use a wall type name of your choice (e.g., WALL100). |
| 17 |
4. Click "+ Add IfcWallType". The top bar will change, providing you with additional options. |
| 18 |
5. Click "Add" (or press SHIFT+A) to create a wall with its own type. |
| 19 |
6. You can adjust the wall's length and height using the parameters in the top bar. |
| 20 |
|
| 21 |
Creating Multiple Connected Walls |
| 22 |
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| 23 |
|
| 24 |
1. Activate the wall tool from the toolbar or use the shortcut (SHIFT + SPACEBAR, 6). |
| 25 |
2. Select the wall type from the dropdown menu, or create a new wall type if needed. |
| 26 |
3. Set the 3D cursor to the desired starting location for the wall by holding SHIFT and left-clicking in the 3D viewport. |
| 27 |
4. Add the first wall segment by pressing SHIFT + A. |
| 28 |
5. Adjust the length of the wall segment by dragging the "Length" parameter or entering a numeric value. |
| 29 |
6. Set the 3D cursor to the location for the next wall segment. Enable snapping to ensure precise connections between segments. |
| 30 |
7. Add the next wall segment by pressing SHIFT + A again. |
| 31 |
8. If needed, rotate the new wall segment by pressing SHIFT + R and adjusting the angle. |
| 32 |
9. Adjust the length of the new segment as required. |
| 33 |
10. Repeat steps 6-9 to create additional wall segments, setting the 3D cursor to the desired locations, until you've completed the wall layout. |
| 34 |
|
| 35 |
Modifying and Joining Walls |
| 36 |
^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| 37 |
|
| 38 |
Bonsai offers various tools for modifying and joining wall segments: |
| 39 |
|
| 40 |
- **Extend (SHIFT + E)**: Extend an existing wall to intersect with another face. |
| 41 |
- **Butt (SHIFT + T)**: Join wall segments end-to-end. |
| 42 |
- **Mitre (SHIFT + Y)**: Create a mitre joint between two wall segments. |
| 43 |
- **Merge (SHIFT + M)**: Combine two wall segments into a single wall. |
| 44 |
- **Flip (SHIFT + F)**: Reverse the direction of a wall segment. |
| 45 |
- **Split (SHIFT + K)**: Divide a wall segment into two parts. |
| 46 |
- **Rotate 90° (SHIFT + R)**: Rotate the wall by 90 degrees. |
| 47 |
|
| 48 |
To use these tools: |
| 49 |
|
| 50 |
1. Select the wall segment(s) you want to modify. |
| 51 |
2. Use the appropriate shortcut or select the tool from the top bar. |
| 52 |
3. Follow the on-screen prompts or adjust parameters as needed. |
| 53 |
|
| 54 |
Aligning Walls |
| 55 |
^^^^^^^^^^^^^^ |
| 56 |
|
| 57 |
You can align walls using the following options: |
| 58 |
|
| 59 |
- **Align Exterior (SHIFT + X)**: Align the wall to its exterior face. |
| 60 |
- **Align Centerline (SHIFT + C)**: Align the wall to its centerline. |
| 61 |
- **Align Interior (SHIFT + V)**: Align the wall to its interior face. |
| 62 |
|
| 63 |
Adding Openings |
| 64 |
^^^^^^^^^^^^^^^ |
| 65 |
|
| 66 |
To add openings (e.g., for doors or windows) to your walls: |
| 67 |
|
| 68 |
1. Select the wall where you want to add an opening. |
| 69 |
2. Click "Add Void" in the top bar or press SHIFT + O. |
| 70 |
3. Adjust the opening's size and position as needed. |
| 71 |
|
| 72 |
Calculating Quantities |
| 73 |
^^^^^^^^^^^^^^^^^^^^^^ |
| 74 |
|
| 75 |
After creating your walls, you can calculate quantities to ensure accurate measurements: |
| 76 |
|
| 77 |
1. Select the wall(s) you want to measure. |
| 78 |
2. Press Q or click "Calculate All Quantities" in the top bar. |
| 79 |
|