| 1 |
Source: idle3-tools |
| 2 |
Section: admin |
| 3 |
Priority: optional |
| 4 |
Maintainer: Debian QA Group <[email protected]> |
| 5 |
Build-Depends: debhelper-compat (= 13) |
| 6 |
Standards-Version: 4.5.0 |
| 7 |
Rules-Requires-Root: no |
| 8 |
Homepage: http://idle3-tools.sourceforge.net/ |
| 9 |
Vcs-Browser: https://salsa.debian.org/debian/idle3-tools |
| 10 |
Vcs-Git: https://salsa.debian.org/debian/idle3-tools.git |
| 11 |
|
| 12 |
Package: idle3-tools |
| 13 |
Architecture: any |
| 14 |
Depends: ${shlibs:Depends}, ${misc:Depends} |
| 15 |
Description: change the idle3 timer of recent Western Digital Hard Disk Drives |
| 16 |
Idle3-tools provides a linux/unix utility that can disable, get and |
| 17 |
set the value of the infamous idle3 timer found on recent Western |
| 18 |
Digital Hard Disk Drives. |
| 19 |
. |
| 20 |
It can be used as an alternative to the official wdidle3.exe |
| 21 |
proprietary utility, without the need to reboot in a DOS environment. |
| 22 |
. |
| 23 |
A power off/on cycle of the drive will still be mandatory for new |
| 24 |
settings to be taken into account. |
| 25 |
. |
| 26 |
Modern Western Digital "Green" Drives include the Intellipark feature |
| 27 |
that stops the disk when not in use. |
| 28 |
. |
| 29 |
Unfortunately, the default timer setting is not perfect on linux/unix |
| 30 |
systems, including many NAS, and leads to a dramatic increase of the |
| 31 |
Load Cycle Count value (SMART attribute #193). With the default timer |
| 32 |
setting, the drive will spin down *every eight seconds* if idle and |
| 33 |
this may get the spindle motor to burn out in a few months or so. |
| 34 |
. |
| 35 |
If you have a Western Digital EADS or EARS drive, please check you |
| 36 |
SMART information before it's too late by running the following |
| 37 |
command: |
| 38 |
. |
| 39 |
sudo smartctl -A /dev/sda | grep "^193" |
| 40 |
. |
| 41 |
If the Load cycle count (which is in the last column) exceeds 1000, |
| 42 |
you're probably affected by the idle3 timer problem. |