Debian Codegraph @

hfaxd/Admin.c++

raw
1 /* $Id$ */
2 /*
3 * Copyright (c) 1995-1996 Sam Leffler
4 * Copyright (c) 1995-1996 Silicon Graphics, Inc.
5 * HylaFAX is a trademark of Silicon Graphics
6 *
7 * Permission to use, copy, modify, distribute, and sell this software and
8 * its documentation for any purpose is hereby granted without fee, provided
9 * that (i) the above copyright notices and this permission notice appear in
10 * all copies of the software and related documentation, and (ii) the names of
11 * Sam Leffler and Silicon Graphics may not be used in any advertising or
12 * publicity relating to the software without the specific, prior written
13 * permission of Sam Leffler and Silicon Graphics.
14 *
15 * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
16 * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
17 * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
18 *
19 * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
20 * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
21 * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
22 * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
23 * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
24 * OF THIS SOFTWARE.
25 */
26
27 /*
28 * Administrative Support.
29 */
30 #include "HylaFAXServer.h"
31 #include "Sys.h"
32 #include "config.h"
33
34 #include <time.h>
35
36 /*
37 * Abort an active call on the specified modem.
38 * The best we can do is send a message to the
39 * current process via the FIFO for that modem;
40 * we cannot be certain if the abort operation
41 * actually takes place.
42 */
43 void
44 HylaFAXServer::abortCallCmd(const char* modem)
45 {
46 logcmd(T_ABOR, "%s", modem);
47 fxStr emsg;
48 if (sendModem(modem, emsg, "Z"))
49 reply(200, "Modem %s told to abort current call.", modem);
50 else
51 reply(500, "Abort request failed: %s.", (const char*) emsg);
52 }
53
54 /*
55 * Answer an inbound call on the specified modem.
56 * The best we can do is send a message to the
57 * faxgetty process via the FIFO for that modem;
58 * we cannot be certain if the operation happens
59 * or is successful because there is no return
60 * channel.
61 *
62 * The ``how'' parameter should be one of fax,
63 * data, voice, or any (note all lower case).
64 */
65 void
66 HylaFAXServer::answerCallCmd(const char* modem, const char* how)
67 {
68 logcmd(T_ANSWER, "%s %s", modem, how);
69 fxStr emsg;
70 if (sendModem(modem, emsg, "A%s", how))
71 reply(200, "Modem %s told to answer call as %s.", modem, how);
72 else
73 reply(500, "Answer request failed: %s.", (const char*) emsg);
74 }
75
76 /*
77 * Disable outbound use of the specified modem. We
78 * first try to notify the appropriate faxgetty process
79 * and if that fails then go directly to the scheduler.
80 * This should handle both send+recv and send-only system
81 * configurations.
82 *
83 * NB: There currently is no place to stash the reason
84 * the modem's use is disabled.
85 */
86 void
87 HylaFAXServer::disableModemCmd(const char* modem, const char* reason)
88 {
89 logcmd(T_DISABLE, "%s %s", modem, reason);
90 fxStr emsg;
91 if (sendModem(modem, emsg, "SD"))
92 reply(200, "Modem %s told to disable outbound use.", modem);
93 else if (sendQueuer(emsg, "+%s:D", modem))
94 reply(200, "Scheduler told to disable use of modem %s.", modem);
95 else
96 reply(500, "Unable to disable use of %s: %s.",
97 modem, (const char*) emsg);
98 }
99
100 /*
101 * Enable outbound use of the specified modem. We
102 * first try to notify the appropriate faxgetty process
103 * and if that fails then go directly to the scheduler.
104 * This should handle both send+recv and send-only system
105 * configurations.
106 */
107 void
108 HylaFAXServer::enableModemCmd(const char* modem)
109 {
110 logcmd(T_ENABLE, "%s", modem);
111 fxStr emsg;
112 if (sendModem(modem, emsg, "SR"))
113 reply(200, "Modem %s told to enable outbound use.", modem);
114 else if (sendQueuer(emsg, "+%s:R", modem))
115 reply(200, "Scheduler told to enable use of modem %s.", modem);
116 else
117 reply(500, "Unable to enable use of %s: %s.",
118 modem, (const char*) emsg);
119 }
120
121 /*
122 * Shutdown client access to the server machine by installing
123 * a shutdown file with the specified reason. The shutdown
124 * may be scheduled for some time in the future in which case
125 * when indicates when the shutdown is to take place.
126 */
127 void
128 HylaFAXServer::shutCmd(const struct tm& when, const char* reason)
129 {
130 logcmd(T_SHUT, "%.24s %s", asctime(&when), reason);
131 if (shutdownFile == "") {
132 reply(503, "Null configured shutdown filename; something is hosed.");
133 return;
134 }
135 const char* msg = "Shutdown failed; ";
136
137 const char* templ = FAX_TMPDIR "/shutXXXXXX";
138 char* buff = strcpy(new char[strlen(templ) + 1], templ);
139
140 int fd = Sys::mkstemp(buff);
141 fxStr tfile = buff;
142 delete [] buff;
143 if (fd < 0) {
144 reply(550, "%serror creating temp file %s: %s.", msg,
145 (const char*) tfile, strerror(errno));
146 return;
147 }
148 FILE* fp = fdopen(fd, "w");
149 if (fp) {
150 fprintf(fp, "%d %d %d %d %d 5 1\n"
151 , when.tm_year+1900
152 , when.tm_mon
153 , when.tm_mday
154 , when.tm_hour
155 , when.tm_min
156 );
157 fprintf(fp, "\n%s\n\n", reason);
158 if (fclose(fp) != 0) {
159 reply(450, "%sI/O error writing %s.", msg, (const char*) tfile);
160 (void) Sys::unlink(tfile);
161 } else if (Sys::rename(tfile, fixPathname(shutdownFile)) < 0) {
162 reply(550, "%srename %s.", msg, strerror(errno));
163 } else {
164 reply(200, "System shutdown scheduled for %.24s.",
165 asctime(&when));
166 return;
167 }
168 } else {
169 reply(550, "%serror opening file: %s", msg, strerror(errno));
170 Sys::close(fd);
171 }
172 (void) Sys::unlink(tfile);
173 }
174
175 void
176 HylaFAXServer::addModemCmd(const char* modem)
177 {
178 logcmd(T_ADDMODEM, "%s", modem);
179 reply(200, "Modem %s added.", modem); // XXX
180 }
181
182 void
183 HylaFAXServer::delModemCmd(const char* modem)
184 {
185 logcmd(T_DELMODEM, "%s", modem);
186 reply(200, "Modem %s deleted.", modem); // XXX
187 }
188
189 void
190 HylaFAXServer::configQueryCmd(const char* where)
191 {
192 logcmd(T_CONFIG, "%s", where);
193 lreply(200, "Configuration info for %s.", where); // XXX
194 // XXX
195 reply(200, "End of configuration info.");
196 }
197
198 void
199 HylaFAXServer::configCmd(const char* where, const char* info)
200 {
201 logcmd(T_CONFIG, "%s %s", where, info);
202 reply(200, "Config info %s sent to %s.", info, where); // XXX
203 }