Debian Codegraph @

debian/NEWS

raw
1 hylafax (3:6.0.7-1) unstable; urgency=medium
2
3 This new package version is rather different from previous ones because
4 it integrates with systemd and changes the way to copy/overlap the
5 configuration directory /etc/hylafax to /var/spool/hylafax/etc.
6
7 1. systemd configuration
8
9 Please note that on new installation, systemd services are not started
10 automatically. You should enable them in order to start on boot:
11
12 # systemctl enable hylafax.service hfaxd.service
13
14 If you configure a modem with faxaddmodem, a new systemd unit file
15 will be created, [email protected], wher DEVICE is the complete
16 name of the device without the leading /dev. After the modem is configured
17 another systemd service is enabled, faxq.
18
19 So, on systems with a modem on /dev/ttyUSB0 and another on /dev/ttyS0,
20 you should normally have these units:
21 hylafax.service ** hides any script in /etc/init.d
22 hfaxd.service ** the server letting client submit faxes
23 [email protected] ** send/receive faxes on /dev/ttyUSB0 modem
24 [email protected] ** send/receive faxes on /dev/ttyS0 modem
25 faxq.service ** manage the queue of faxes
26
27 They are all configured as part of the first one, so starting
28 hylafax.service will start all other services as well.
29
30 faxgetty services are created by faxaddmodem and when upgrading
31 hylafax to 6.0.7-1.
32
33 The systemd dependency from faxgetty to the device is coupled with an
34 udev rule. Rules are defined in /lib/udev/rules.d/*hylafax-server*
35 and only include ttyS0-4, ttyUSB0-15, ttyIAX0-7
36
37 2. /var/spool/hylafax/etc
38
39 The configuration is still in /etc/hylafax, but all daemons running as
40 systemd services mount the directory in /var/spool/hylafax/etc as
41 well. This is configured in the systemd unit file.
42
43 All other commands that are not run as daemons, have been moved
44 to directory /var/lib/hylafax/bin. In their original pathnames
45 has been installed a wrapper that mount the directory, calls
46 the real command, then umount the directory.
47
48 -- Giuseppe Sacco <[email protected]> Fri, 14 Feb 2020 00:24:41 +0100