Debian Codegraph @

debian/extras/kdc.conf

raw
1 [logging]
2 # Specifies that entity should use the specified
3 # destination for logging.
4 #
5 # Format format destinations:
6 #
7 # STDERR
8 # This logs to the program's stderr.
9 #
10 # FILE:/file
11 # FILE=/file
12 # Log to the specified file. The form using a colon appends to the file,
13 # the form with an equal truncates the file. The truncating form keeps the
14 # file open, while the appending form closes it after each log message
15 # (which makes it possible to rotate logs). The truncating form is mainly
16 # for compatibility with the MIT libkrb5.
17 #
18 # DEVICE=/device
19 # This logs to the specified device, at present this is the same as
20 # FILE:/device.
21 #
22 # CONSOLE
23 # Log to the console, this is the same as DEVICE=/dev/console.
24
25 # SYSLOG[:priority[:facility]]
26 # Send messages to the syslog system, using priority, and facility. To get
27 # the name for one of these, you take the name of the macro passed to
28 # syslog(3), and remove the leading LOG_ (LOG_NOTICE becomes NOTICE). The
29 # default values (as well as the values used for unrecognised values), are ERR,
30 # and AUTH, respectively. See syslog(3) for a list of priorities and
31 # facilities.
32 #
33 # Each destination may optionally be prepended with a range of logging levels,
34 # specified as min-max/. Either of the min and max valued may be omitted, in
35 # this case min is assumed to be zero, and max is assumed to be infinity. If
36 # you don't include a dash, both min and max gets set to the specified value.
37 # If no range is specified, all messages gets logged.
38 #
39 kdc = FILE:/var/log/heimdal-kdc.log
40 # kdc = SYSLOG:INFO
41
42 [kdc]
43
44 # database = {
45 #
46 # dbname = DATABASENAME
47 # Use this database for this realm. See
48 # the info documetation how to configure
49 # diffrent database backends.
50 #
51 # realm = REALM
52 # Specifies the realm that will be stored
53 # in this database. It realm isn't set,
54 # it will used as the default database,
55 # there can only be one entry that doesn't
56 # have a realm stanza.
57 #
58 # mkey_file = FILENAME
59 # Use this keytab file for the master key
60 # of this database. If not specified
61 # DATABASENAME.mkey will be used.
62 #
63 # acl_file = PA FILENAME
64 # Use this file for the ACL list of this
65 # database.
66 #
67 # log_file = FILENAME
68 # Use this file as the log of changes per-
69 # formed to the database. This file is
70 # used by ipropd-master for propagating
71 # changes to slaves.
72 #
73 # }
74
75 database = {
76 dbname = /var/lib/heimdal-kdc/heimdal
77 acl_file = /etc/heimdal-kdc/kadmind.acl
78 }
79
80 # Maximum size of a kdc request.
81 #
82 # max-request = SIZE
83
84 # If set pre-authentication is required. Since krb4
85 # requests are not pre-authenticated they will be
86 # rejected.
87 #
88 # require-preauth = BOOL
89
90 # List of ports the kdc should listen to.
91 #
92 # ports = list of ports
93
94 # List of addresses the kdc should bind to.
95 #
96 # addresses = list of interfaces
97
98 # Should the kdc answer kdc-requests over http.
99 #
100 # enable-http = BOOL
101
102 # If this kdc should emulate the AFS kaserver.
103 #
104 # enable-kaserver = BOOL
105
106 # Verify the addresses in the tickets used in tgs
107 # requests.
108 #
109 # check-ticket-addresses = BOOL
110
111 # Allow address-less tickets.
112 #
113 # allow-null-ticket-addresses = BOOL
114
115 # If the kdc is allowed to hand out anonymous tick-
116 # ets.
117 #
118 # allow-anonymous = BOOL
119
120 # Encode as-rep as tgs-rep tobe compatible with mis-
121 # takes older DCE secd did.
122 # encode_as_rep_as_tgs_rep = BOOL
123
124 # The time before expiration that the user should be
125 # warned that her password is about to expire.
126 #
127 # kdc_warn_pwexpire = TIME
128
129 # What type of logging the kdc should use, see also
130 # [logging]/kdc.
131 #
132 # logging = Logging
133
134 # use_2b = {
135 #
136 # principal = BOOL
137 # boolean value if the 524 daemon should
138 # return AFS 2b tokens for principal.
139 #
140 # ...
141 #
142 # }
143
144 # If the LDAP backend is used for storing principals,
145 # this is the structural object that will be used
146 # when creating and when reading objects. The
147 # default value is account .
148 #
149 # hdb-ldap-structural-object structural object
150
151 # is the dn that will be appended to the principal
152 # when creating entries. Default value is the search
153 # dn.
154 #
155 # hdb-ldap-create-base creation dn
156
157 [kadmin]
158
159 # If pre-authentication is required to talk to the
160 # kadmin server.
161 #
162 # require-preauth = BOOL
163
164 # If a principal already have its password set for
165 # expiration, this is the time it will be valid for
166 # after a change.
167 #
168 # password_lifetime = time
169
170 # For each entry in default_keys try to parse it as a
171 # sequence of etype:salttype:salt syntax of this if
172 # something like:
173 #
174 # [(des|des3|etype):](pw-salt|afs3-salt)[:string]
175 #
176 # If etype is omitted it means everything, and if
177 # string is omitted it means the default salt string
178 # (for that principal and encryption type). Addi-
179 # tional special values of keytypes are:
180 #
181 # v5 The Kerberos 5 salt pw-salt
182 #
183 # v4 The Kerberos 4 salt des:pw-salt:
184 #
185 # default_keys = keytypes...
186
187 # When true, this is the same as
188 #
189 # default_keys = des3:pw-salt v4
190 #
191 # and is only left for backwards compatibility.
192 # use_v4_salt = BOOL
193
194 [password_quality]
195 # Check the Password quality assurance in the info documentation
196 # for more information.
197
198 # Library name that contains the password check_func-
199 # tion
200 #
201 # check_library = library-name
202
203 # Function name for checking passwords in
204 # check_library
205 #
206 # check_function = function-name
207
208 # List of libraries that can do password policy
209 # checks
210 #
211 # policy_libraries = library1 ... libraryN
212
213 # List of policy names to apply to the password.
214 # Builtin policies are among other minimum-length,
215 # character-class, external-check.
216 #
217 # policies = policy1 ... policyN
218