Debian Codegraph @

NEWS

raw
1 Version 1.0.4
2
3 * fixed remotely exploited vulnerability that can be used
4 for denial-of-service attack and, potentially, arbitrary
5 code execution
6
7 Version 1.0.3
8
9 * properly handle IPv6 source addresses
10 * check IPv6 addresses with DNSBL/DNSWL
11 * fixed build with glibc (function name conflict)
12 * fixed a number of errors found by static and dynamic analysis
13 * fixed build with --enable-milter option (experimental)
14 * fixed build with gcc -Werror=return-type
15 * fixed mistakes in manual pages
16
17 Version 1.0.2
18
19 * do not check /etc/hosts in dnsbl check
20 * -u command line option to run grossd with a differnet uid
21
22 Issues fixed:
23 #71: grossd dies under Linux
24 #72: freebsd port broken
25 #77: grossd does not call initgroups() prior setgid()
26
27 Version 1.0.1
28
29 * Two new configuration options: postfix_response_grey and
30 postfix_response_block. Now it's possible to configure
31 responses grossd sends in reply to Postfix policy delegation
32 client.
33 * Now grossd allows only the configured sync_peer to connect
34 to sync server port.
35 * When grey_threshold = 0 is set grossd defaults to greylisting.
36 Now it's possible to combine traditional greylisting with
37 blocking based on check results.
38
39 Issues fixed:
40 #65: Version number to log (RFE)
41 #66: Compiler warnings on with 1.0.0
42 #67: Setting grey_threshold = 0 is not intuitive
43 #68: grossd should accept sync connections only from the configured sync_peer
44 #69: Implement postfix_response_grey and postfix_response_block (RFE)
45 #70: Busyloop if no access to configured statefile
46
47 Version 1.0.0
48
49 * Prevent grossd from running as root (euid == 0). You may
50 have to modify configuration and state file ownerships
51 and/or permissions. Grossd tries to setuid() and setgid()
52 to nobody if started by root.
53 * New match shortcut logic. Now grossd will shortcut after
54 a filter match only if no checks are configured (traditional
55 greylister) or block_threshold == 0.
56 * A lot of Milter related fixes.
57
58 - changed filter_bits default back to 24, as stated in the docs.
59 - added grey_reason configuration file option. See block_reason.
60
61 Issues fixed:
62 #48: Need man pages
63 #59: grossd 0.9.3 leaks memory
64 #60: Grossd should do all dns queries as fully qualified
65 #61: Space Character in Mail From Crashing Gross
66 #62: Double free() with milter
67 #63: Apostrophe chokes old gcc
68 #64: Garbage in logs with milter api
69
70 Version 0.9.3
71
72 * HELOified all the rest of the code. There are still no checks
73 that use helo info, but now grossd logs it and also gclient
74 can send it to the server. Check INSTALL details about
75 configuring SJSMS to send helo string over to grossd.
76 * New logfile format! An example log line:
77
78 Thu Apr 17 14:50:05 2008 #8505600: a=greylist d=3 w=5 c=127.0.0.2
79 s=sender r=recipient h=utu.fi m=cbl.abuseat.org+1 m=bl.spamcop.net+2
80 m=combined.njabl.org+1 m=dnsbl.sorbs.net+1
81
82 where
83 a = action
84 d = delay
85 w = total weight
86 c = client ip
87 s = sender
88 r = recipient
89 h = helo/ehlo
90 m = matched check with possible weight
91
92 - A few important bug fixes to milter server
93 - behaviour change: grossd now exits after creating the
94 statefile when invoked with -C command line option. This
95 makes life easier for package maintainers in the future.
96 - Implemented pidfile creation and checking. New config option
97 'pidfile' controls the behaviour. Setting the option will make
98 grossd to write the process pid into the file specified by the
99 full path. An optional parameter 'check' can be set to keep
100 grossd from starting if the pidfile already exists.
101
102 pidfile = /full/path[;check]
103
104 Another way to control this is by command line options -p and -P.
105 Both of the options will enable pidfile creation, and -P will
106 check the existence of the file.
107
108 Issues fixed:
109 #58: grossd should write a pid file after daemonizing (RFE)
110
111 Version 0.9.2
112
113 - documented configuration options query_timelimit and
114 block_reason. See doc/examples/grossd.conf
115 - new option: pool_maxthreads, you may need to change this
116 if you get more than 100 queries per second and/or have
117 slow dns servers
118 - some log messages got sent with wrong priorities
119
120 #56: Grossd skips all the checks if block_threshold not set
121 #57: sjsms: query_timelimit is one second off
122
123 Version 0.9.1
124
125 Issues fixed:
126 #55: --disable-dnsbl broken on 0.9
127
128 Version 0.9
129
130 * changed the port defaults to be more compatible with
131 the community, grossd now defaults to ports 5525 (grossd),
132 5524 (sync), and 5522 (status queries)
133 * preliminary support for MILTER protocol, check config file
134 * support for definitive checks: it's now possible to write
135 checks that cause grossd to block or pass (whitelisting)
136 * dnsbl check is now run time configurable
137 * two new check types: RHSBL and DNSWL - check config file
138 for documentation and examples. DNSWL is first definitive
139 check.
140
141 - improved thread counting in thread_pool.c
142 - code cleaning
143 - default for grey_mask was 0, effectively discarding client_ip
144 information from greylisting triplet. Changed it to 24.
145 - checks for c-ares version: there's an API change between
146 1.4.x and 1.5.0
147
148 Issues fixed:
149 #40: new type of check - RHSBL (RFE)
150 #41: new type of check - DNSWL (RFE)
151 #46: Make dnsbl checking run time configurable (RFE)
152 #47: Grossd will not run any checks if configured with --disable-dnsbl
153 #54: Grossd dies without error msg in non-localhost setup (with linux)
154
155 Version 0.8.2
156
157 - updating mappings example in INSTALL
158 - logging less verbose (one line per query)
159
160 Issues fixed:
161 #39: blocker queries cause segmentation fault
162 #43: Lot's of open udp connections when using grosscheck
163
164 Version 0.8.1
165
166 A couple of bugs fixed.
167
168 Issues fixed:
169 #35: grossd crashes when starting
170 #36: synchronization still loses one update message
171
172 Version 0.8.0
173
174 In short: Important changes from the previous version
175
176 * You must configure protocols in config file. This is done via
177 'protocol' config file parameter. Either 'protocol = sjsms' or
178 'protocol = postfix' or both.
179 * 'sync_host' and 'peer_host' has been deprecated. Use new
180 'sync_listen' and 'sync_peer' options.
181
182
183 The longer list:
184 - Checks are now done in thread pools, which makes it easier to
185 develop new checks, like Sophos blocker or SPF.
186 - grossd can log aggregate statistics about query results. Check
187 'stat_type' and 'stat_interval' configuration parameters.
188 - grossd can now serve different query protocols simultaneously.
189 This is controlled by the 'protocol' config parameter.
190 - Preliminary support for Sophos blocker. Not yet production
191 quality, needs testing. Check issue #19.
192 - check also doc/examples/grossd.conf, which make install will
193 install as the default config file if there is no existing
194 grossd.conf
195
196 Issues fixed:
197 #16: synchronization is confusing to configure
198 #18: documented and configurable timeouts
199 #23: Customizable SMTP error messages
200 #26: connections could come from different IP addresses
201 #27: configurable greylisting time
202 #28: Bug in the mapping file example
203 #29: dnsbl tolerance counters not working on OS X
204 #31: Get rid of --with-worker configure option
205 #32: gcc makes grosscheck so dependent on libgcc_s.so.1
206 #33: Update queue synchronizing
207
208
209 Version 0.7.2
210
211 - Configurable log_level and syslog_method.
212 - Message queue enhancements under the hood
213 - Status counters for various events implemented
214 - You can now use host names in the configuration
215
216 Issues fixed:
217 #20: allow host names in configuration
218 #21: A dry run option for testing needed
219 #22: configurable logging
220
221 Version 0.7.1
222
223 A replacement of 0.7.0, there was a bug that prevented grossd
224 from compiling --with-worker=postfix.
225
226 Version 0.7.0
227
228 Implemented a thread pool feature. Worker threads are now
229 reused, instead of firing up one on each connection. Numerous
230 bug fixes, most notably byte order related bugs in proto_sjsms.c.
231 Some configuration file changes: peerhost and synchost has been
232 replaced by sync_listen and sync_peer.
233
234 #Issues fixed:
235 #15: postfix protocol broken
236 #17: proto-sjsms breaks between hosts of different endianess
237
238 Version 0.6.3
239
240 Ported to OS X. Since sem_getvalue() is not implemented on
241 OS X, skipping unresponsive dnsbls does not work, yet.
242
243 Issues fixed:
244 #14: processing delay should be included in the logs
245
246 Version 0.6.2
247
248 Issues fixed:
249 #1: -lpthread also on Solaris 9.
250 #2: Logging has been trimmed down.
251 #7: Libdir is now installed same as other directories.
252 #8: Removed relays.ordb.org from example config.
253 #9: SJSMS client library path corrected in INSTALL.
254 #10: Default config file path is now correct with default prefix.
255 #11: Implemented -D command line option for enabling debug logging.
256 #12: grosscheck now sends empty sender address as <> in query to grossd.
257
258 - Installs libraries to $prefix/lib/ instead of previous
259 $prefix/lib/gross/
260
261 Version 0.6.1
262
263 - You can now create statfile with grossd -C command line option
264 - Config file defaults to $sysconfdir/grossd.conf
265 - example config in doc/examples/grossd.conf