Debian Codegraph @

regressiontests/complex/octahedron/grompp.mdp

raw
1 ;
2 ; File 'mdout.mdp' was generated
3 ; By user: mark (1302)
4 ; On host: gromacs
5 ; At date: Thu Dec 11 12:13:15 2014
6 ;
7
8 ; VARIOUS PREPROCESSING OPTIONS
9 ; Preprocessor information: use cpp syntax.
10 ; e.g.: -I/home/joe/doe -I/home/mary/roe
11 include =
12 ; e.g.: -DPOSRES -DFLEXIBLE (note these variable names are case sensitive)
13 define =
14
15 ; RUN CONTROL PARAMETERS
16 integrator = md
17 ; Start time and timestep in ps
18 tinit = 0
19 dt = 0.002
20 nsteps = 20
21 ; For exact run continuation or redoing part of a run
22 init_step = 0
23 ; Part index is updated automatically on checkpointing (keeps files separate)
24 simulation-part = 1
25 ; mode for center of mass motion removal
26 comm-mode = Linear
27 ; number of steps for center of mass motion removal
28 nstcomm = 100
29 ; group(s) for center of mass motion removal
30 comm-grps =
31
32 ; LANGEVIN DYNAMICS OPTIONS
33 ; Friction coefficient (amu/ps) and random seed
34 bd-fric = 0
35 ld-seed = 299383
36
37 ; ENERGY MINIMIZATION OPTIONS
38 ; Force tolerance and initial step-size
39 emtol = 10
40 emstep = 0.01
41 ; Max number of iterations in relax-shells
42 niter = 20
43 ; Step size (ps^2) for minimization of flexible constraints
44 fcstep = 0
45 ; Frequency of steepest descents steps when doing CG
46 nstcgsteep = 1000
47 nbfgscorr = 10
48
49 ; TEST PARTICLE INSERTION OPTIONS
50 rtpi = 0.05
51
52 ; OUTPUT CONTROL OPTIONS
53 ; Output frequency for coords (x), velocities (v) and forces (f)
54 nstxout = 10
55 nstvout = 0
56 nstfout = 10
57 ; Output frequency for energies to log file and energy file
58 nstlog = 10
59 nstcalcenergy = 10
60 nstenergy = 10
61 ; Output frequency and precision for .xtc file
62 nstxout-compressed = 0
63 compressed-x-precision = 1000
64 ; This selects the subset of atoms for the compressed
65 ; trajectory file. You can select multiple groups. By
66 ; default, all atoms will be written.
67 compressed-x-grps =
68 ; Selection of energy groups
69 energygrps =
70
71 ; NEIGHBORSEARCHING PARAMETERS
72 ; cut-off scheme (Verlet: particle based cut-offs, group: using charge groups)
73 cutoff-scheme = Verlet
74 ; nblist update frequency
75 nstlist = 10
76 ; ns algorithm (simple or grid)
77 ns_type = grid
78 ; Periodic boundary conditions: xyz, no, xy
79 pbc = xyz
80 periodic-molecules = no
81 ; Allowed energy error due to the Verlet buffer in kJ/mol/ps per atom,
82 ; a value of -1 means: use rlist
83 verlet-buffer-tolerance = 0.001
84 ; Allowed error in the average pressure due to the Verlet buffer for LJ interactions
85 verlet-buffer-pressure-tolerance = -1
86 ; nblist cut-off
87 rlist = 1.4
88 ; long-range cut-off for switched potentials
89 rlistlong = -1
90 nstcalclr = -1
91
92 ; OPTIONS FOR ELECTROSTATICS AND VDW
93 ; Method for doing electrostatics
94 coulombtype = PME
95 coulomb-modifier = Potential-shift-Verlet
96 rcoulomb-switch = 0
97 rcoulomb = 1.4
98 ; Relative dielectric constant for the medium and the reaction field
99 epsilon-r = 1
100 epsilon-rf = 0
101 ; Method for doing Van der Waals
102 vdw-type = cut-off
103 vdw-modifier = Potential-shift-Verlet
104 ; cut-off lengths
105 rvdw-switch = 0
106 rvdw = 1.4
107 ; Apply long range dispersion corrections for Energy and Pressure
108 DispCorr = no
109 ; Extension of the potential lookup tables beyond the cut-off
110 table-extension = 1
111 ; Separate tables between energy group pairs
112 energygrp-table =
113 ; Spacing for the PME/PPPM FFT grid
114 fourierspacing = 0.15
115 ; FFT grid size, when a value is 0 fourierspacing will be used
116 fourier_nx = 0
117 fourier_ny = 0
118 fourier_nz = 0
119 ; EWALD/PME/PPPM parameters
120 pme_order = 4
121 ewald_rtol = 1e-05
122 ewald-rtol-lj = 0.001
123 lj-pme-comb-rule = Geometric
124 ewald_geometry = 3d
125 epsilon_surface = 0
126
127 ; IMPLICIT SOLVENT ALGORITHM
128 implicit-solvent = No
129
130 ; GENERALIZED BORN ELECTROSTATICS
131 ; Algorithm for calculating Born radii
132 gb-algorithm = Still
133 ; Frequency of calculating the Born radii inside rlist
134 nstgbradii = 1
135 ; Cutoff for Born radii calculation; the contribution from atoms
136 ; between rlist and rgbradii is updated every nstlist steps
137 rgbradii = 1
138 ; Dielectric coefficient of the implicit solvent
139 gb-epsilon-solvent = 80
140 ; Salt concentration in M for Generalized Born models
141 gb-saltconc = 0
142 ; Scaling factors used in the OBC GB model. Default values are OBC(II)
143 gb-obc-alpha = 1
144 gb-obc-beta = 0.8
145 gb-obc-gamma = 4.85
146 gb-dielectric-offset = 0.009
147 sa-algorithm = Ace-approximation
148 ; Surface tension (kJ/mol/nm^2) for the SA (nonpolar surface) part of GBSA
149 ; The value -1 will set default value for Still/HCT/OBC GB-models.
150 sa-surface-tension = -1
151
152 ; OPTIONS FOR WEAK COUPLING ALGORITHMS
153 ; Temperature coupling
154 Tcoupl = V-rescale
155 nsttcouple = 10
156 nh-chain-length = 10
157 print-nose-hoover-chain-variables = no
158 ; Groups to couple separately
159 tc-grps = System
160 ; Time constant (ps) and reference temperature (K)
161 tau_t = 0.5
162 ref_t = 298
163 ; pressure coupling
164 pcoupl = No
165 pcoupltype = Isotropic
166 nstpcouple = -1
167 ; Time constant (ps), compressibility (1/bar) and reference P (bar)
168 tau-p = 1
169 compressibility =
170 ref-p =
171 ; Scaling of reference coordinates, No, All or COM
172 refcoord-scaling = No
173
174 ; Optimization of QM subsystem
175 bOPT =
176 bTS =
177
178 ; SIMULATED ANNEALING
179 ; Type of annealing for each temperature group (no/single/periodic)
180 annealing =
181 ; Number of time points to use for specifying annealing in each group
182 annealing-npoints =
183 ; List of times at the annealing points for each group
184 annealing-time =
185 ; Temp. at each annealing point, for each group.
186 annealing-temp =
187
188 ; GENERATE VELOCITIES FOR STARTUP RUN
189 gen-vel = no
190 gen-temp = 300
191 gen-seed = -1
192
193 ; OPTIONS FOR BONDS
194 constraints = all-bonds
195 ; Type of constraint algorithm
196 constraint-algorithm = LINCS
197 ; Do not constrain the start configuration
198 continuation = no
199 ; Use successive overrelaxation to reduce the number of shake iterations
200 Shake-SOR = no
201 ; Relative tolerance of shake
202 shake-tol = 1e-05
203 ; Highest order in the expansion of the constraint coupling matrix
204 lincs-order = 4
205 ; Number of iterations in the final step of LINCS. 1 is fine for
206 ; normal simulations, but use 2 to conserve energy in NVE runs.
207 ; For energy minimization with constraints it should be 4 to 8.
208 lincs-iter = 1
209 ; Lincs will write a warning to the stderr if in one step a bond
210 ; rotates over more degrees than
211 lincs-warnangle = 30
212 ; Convert harmonic bonds to morse potentials
213 morse = no
214
215 ; ENERGY GROUP EXCLUSIONS
216 ; Pairs of energy groups for which all non-bonded interactions are excluded
217 energygrp-excl =
218
219 ; WALLS
220 ; Number of walls, type, atom types, densities and box-z scale factor for Ewald
221 nwall = 0
222 wall-type = 9-3
223 wall-r-linpot = -1
224 wall-atomtype =
225 wall-density =
226 wall-ewald-zfac = 3
227
228 ; COM PULLING
229 ; Pull type: no, umbrella, constraint or constant-force
230 pull = no
231
232 ; ENFORCED ROTATION
233 ; Enforced rotation: No or Yes
234 rotation = no
235
236 ; Group to display and/or manipulate in interactive MD session
237 IMD-group =
238
239 ; NMR refinement stuff
240 ; Distance restraints type: No, Simple or Ensemble
241 disre = No
242 ; Force weighting of pairs in one distance restraint: Conservative or Equal
243 disre-weighting = Conservative
244 ; Use sqrt of the time averaged times the instantaneous violation
245 disre-mixed = no
246 disre-fc = 1000
247 disre-tau = 0
248 ; Output frequency for pair distances to energy file
249 nstdisreout = 100
250 ; Orientation restraints: No or Yes
251 orire = no
252 ; Orientation restraints force constant and tau for time averaging
253 orire-fc = 0
254 orire-tau = 0
255 orire-fitgrp =
256 ; Output frequency for trace(SD) and S to energy file
257 nstorireout = 100
258
259 ; Free energy variables
260 free-energy = no
261 couple-moltype =
262 couple-lambda0 = vdw-q
263 couple-lambda1 = vdw-q
264 couple-intramol = no
265 init-lambda = -1
266 init-lambda-state = -1
267 delta-lambda = 0
268 nstdhdl = 50
269 fep-lambdas =
270 mass-lambdas =
271 coul-lambdas =
272 vdw-lambdas =
273 bonded-lambdas =
274 restraint-lambdas =
275 temperature-lambdas =
276 calc-lambda-neighbors = 1
277 init-lambda-weights =
278 dhdl-print-energy = no
279 sc-alpha = 0
280 sc-power = 1
281 sc-r-power = 6
282 sc-sigma = 0.3
283 sc-coul = no
284 separate-dhdl-file = yes
285 dhdl-derivatives = yes
286 dh_hist_size = 0
287 dh_hist_spacing = 0.1
288
289 ; Non-equilibrium MD stuff
290 acc-grps =
291 accelerate =
292 freezegrps =
293 freezedim =
294 cos-acceleration = 0
295 deform =
296
297 ; simulated tempering variables
298 simulated-tempering = no
299 simulated-tempering-scaling = geometric
300 sim-temp-low = 300
301 sim-temp-high = 300
302
303 ; Electric fields
304 ; Format is number of terms (int) and for all terms an amplitude (real)
305 ; and a phase angle (real)
306 E-x =
307 E-xt =
308 E-y =
309 E-yt =
310 E-z =
311 E-zt =
312
313 ; Ion/water position swapping for computational electrophysiology setups
314 ; Swap positions along direction: no, X, Y, Z
315 swapcoords = no
316
317 ; AdResS parameters
318 adress = no
319
320 ; User defined thingies
321 user1-grps =
322 user2-grps =
323 userint1 = 0
324 userint2 = 0
325 userint3 = 0
326 userint4 = 0
327 userreal1 = 0
328 userreal2 = 0
329 userreal3 = 0
330 userreal4 = 0