Debian Codegraph @

regressiontests/complex/nbnxn-vdw-potential-switch-argon/grompp.mdp

raw
1 ;
2 ; File 'done.mdp' was generated
3 ; By user: mark (1302)
4 ; On host: amd2
5 ; At date: Mon Feb 17 15:10:46 2014
6 ;
7
8 ; VARIOUS PREPROCESSING OPTIONS
9 ; Preprocessor information: use cpp syntax.
10 ; e.g.: -I/home/joe/doe -I/home/mary/roe
11 include =
12 ; e.g.: -DPOSRES -DFLEXIBLE (note these variable names are case sensitive)
13 define =
14
15 ; RUN CONTROL PARAMETERS
16 integrator = md
17 ; Start time and timestep in ps
18 tinit = 0
19 dt = 0.002
20 nsteps = 20
21 ; For exact run continuation or redoing part of a run
22 init-step = 0
23 ; Part index is updated automatically on checkpointing (keeps files separate)
24 simulation-part = 1
25 ; mode for center of mass motion removal
26 comm-mode = linear
27 ; number of steps for center of mass motion removal
28 nstcomm = 20
29 ; group(s) for center of mass motion removal
30 comm-grps =
31
32 ; LANGEVIN DYNAMICS OPTIONS
33 ; Friction coefficient (amu/ps) and random seed
34 bd-fric = 0
35 ld-seed = 1993
36
37 ; ENERGY MINIMIZATION OPTIONS
38 ; Force tolerance and initial step-size
39 emtol = 10
40 emstep = 0.01
41 ; Max number of iterations in relax-shells
42 niter = 20
43 ; Step size (ps^2) for minimization of flexible constraints
44 fcstep = 0
45 ; Frequency of steepest descents steps when doing CG
46 nstcgsteep = 1000
47 nbfgscorr = 10
48
49 ; TEST PARTICLE INSERTION OPTIONS
50 rtpi = 0.05
51
52 ; OUTPUT CONTROL OPTIONS
53 ; Output frequency for coords (x), velocities (v) and forces (f)
54 nstxout = 20
55 nstvout = 20
56 nstfout = 20
57 ; Output frequency for energies to log file and energy file
58 nstlog = 20
59 nstcalcenergy = 20
60 nstenergy = 20
61 ; Output frequency and precision for .xtc file
62 nstxout-compressed = 0
63 compressed-x-precision = 1000
64 ; This selects the subset of atoms for the compressed
65 ; trajectory file. You can select multiple groups. By
66 ; default, all atoms will be written.
67 compressed-x-grps =
68 ; Selection of energy groups
69 energygrps =
70
71 ; NEIGHBORSEARCHING PARAMETERS
72 ; cut-off scheme (Verlet: particle based cut-offs, group: using charge groups)
73 cutoff-scheme = Verlet
74 ; nblist update frequency
75 nstlist = 10
76 ; ns algorithm (simple or grid)
77 ns-type = grid
78 ; Periodic boundary conditions: xyz, no, xy
79 pbc = xyz
80 periodic-molecules = no
81 ; Allowed energy error due to the Verlet buffer in kJ/mol/ps per atom,
82 ; a value of -1 means: use rlist
83 verlet-buffer-tolerance = 0.005
84 ; Allowed error in the average pressure due to the Verlet buffer for LJ interactions
85 verlet-buffer-pressure-tolerance = -1
86 ; nblist cut-off
87 rlist = 2.5
88 ; long-range cut-off for switched potentials
89 rlistlong = -1
90 nstcalclr = -1
91
92 ; OPTIONS FOR ELECTROSTATICS AND VDW
93 ; Method for doing electrostatics
94 coulombtype = Cut-off
95 coulomb-modifier = Potential-shift-Verlet
96 rcoulomb-switch = 0
97 rcoulomb = 2.5
98 ; Relative dielectric constant for the medium and the reaction field
99 epsilon-r = 1
100 epsilon-rf = 1
101 ; Method for doing Van der Waals
102 vdw-type = Cut-off
103 vdw-modifier = Potential-switch
104 ; cut-off lengths
105 rvdw-switch = 2.2
106 rvdw = 2.5
107 ; Apply long range dispersion corrections for Energy and Pressure
108 DispCorr = enerpres
109 ; Extension of the potential lookup tables beyond the cut-off
110 table-extension = 1
111 ; Separate tables between energy group pairs
112 energygrp-table =
113 ; Spacing for the PME/PPPM FFT grid
114 fourierspacing = 0.12
115 ; FFT grid size, when a value is 0 fourierspacing will be used
116 fourier-nx = 0
117 fourier-ny = 0
118 fourier-nz = 0
119 ; EWALD/PME/PPPM parameters
120 pme-order = 4
121 ewald-rtol = 1e-05
122 ewald-rtol-lj = 0.001
123 lj-pme-comb-rule = Geometric
124 ewald-geometry = 3d
125 epsilon-surface = 0
126 optimize-fft = no
127
128 ; IMPLICIT SOLVENT ALGORITHM
129 implicit-solvent = No
130
131 ; GENERALIZED BORN ELECTROSTATICS
132 ; Algorithm for calculating Born radii
133 gb-algorithm = Still
134 ; Frequency of calculating the Born radii inside rlist
135 nstgbradii = 1
136 ; Cutoff for Born radii calculation; the contribution from atoms
137 ; between rlist and rgbradii is updated every nstlist steps
138 rgbradii = 1
139 ; Dielectric coefficient of the implicit solvent
140 gb-epsilon-solvent = 80
141 ; Salt concentration in M for Generalized Born models
142 gb-saltconc = 0
143 ; Scaling factors used in the OBC GB model. Default values are OBC(II)
144 gb-obc-alpha = 1
145 gb-obc-beta = 0.8
146 gb-obc-gamma = 4.85
147 gb-dielectric-offset = 0.009
148 sa-algorithm = Ace-approximation
149 ; Surface tension (kJ/mol/nm^2) for the SA (nonpolar surface) part of GBSA
150 ; The value -1 will set default value for Still/HCT/OBC GB-models.
151 sa-surface-tension = -1
152
153 ; OPTIONS FOR WEAK COUPLING ALGORITHMS
154 ; Temperature coupling
155 tcoupl = No
156 nsttcouple = -1
157 nh-chain-length = 10
158 print-nose-hoover-chain-variables = no
159 ; Groups to couple separately
160 tc-grps =
161 ; Time constant (ps) and reference temperature (K)
162 tau-t =
163 ref-t =
164 ; pressure coupling
165 pcoupl = No
166 pcoupltype = Isotropic
167 nstpcouple = -1
168 ; Time constant (ps), compressibility (1/bar) and reference P (bar)
169 tau-p = 1
170 compressibility =
171 ref-p =
172 ; Scaling of reference coordinates, No, All or COM
173 refcoord-scaling = No
174
175 ; Optimization of QM subsystem
176 bOPT =
177 bTS =
178
179 ; SIMULATED ANNEALING
180 ; Type of annealing for each temperature group (no/single/periodic)
181 annealing =
182 ; Number of time points to use for specifying annealing in each group
183 annealing-npoints =
184 ; List of times at the annealing points for each group
185 annealing-time =
186 ; Temp. at each annealing point, for each group.
187 annealing-temp =
188
189 ; GENERATE VELOCITIES FOR STARTUP RUN
190 gen-vel = no
191 gen-temp = 300
192 gen-seed = -1
193
194 ; OPTIONS FOR BONDS
195 constraints = none
196 ; Type of constraint algorithm
197 constraint-algorithm = Lincs
198 ; Do not constrain the start configuration
199 continuation = no
200 ; Use successive overrelaxation to reduce the number of shake iterations
201 Shake-SOR = no
202 ; Relative tolerance of shake
203 shake-tol = 0.0001
204 ; Highest order in the expansion of the constraint coupling matrix
205 lincs-order = 4
206 ; Number of iterations in the final step of LINCS. 1 is fine for
207 ; normal simulations, but use 2 to conserve energy in NVE runs.
208 ; For energy minimization with constraints it should be 4 to 8.
209 lincs-iter = 1
210 ; Lincs will write a warning to the stderr if in one step a bond
211 ; rotates over more degrees than
212 lincs-warnangle = 30
213 ; Convert harmonic bonds to morse potentials
214 morse = no
215
216 ; ENERGY GROUP EXCLUSIONS
217 ; Pairs of energy groups for which all non-bonded interactions are excluded
218 energygrp-excl =
219
220 ; WALLS
221 ; Number of walls, type, atom types, densities and box-z scale factor for Ewald
222 nwall = 0
223 wall-type = 9-3
224 wall-r-linpot = -1
225 wall-atomtype =
226 wall-density =
227 wall-ewald-zfac = 3
228
229 ; COM PULLING
230 ; Pull type: no, umbrella, constraint or constant-force
231 pull = no
232
233 ; ENFORCED ROTATION
234 ; Enforced rotation: No or Yes
235 rotation = no
236
237 ; NMR refinement stuff
238 ; Distance restraints type: No, Simple or Ensemble
239 disre = No
240 ; Force weighting of pairs in one distance restraint: Conservative or Equal
241 disre-weighting = Conservative
242 ; Use sqrt of the time averaged times the instantaneous violation
243 disre-mixed = no
244 disre-fc = 1000
245 disre-tau = 0
246 ; Output frequency for pair distances to energy file
247 nstdisreout = 100
248 ; Orientation restraints: No or Yes
249 orire = no
250 ; Orientation restraints force constant and tau for time averaging
251 orire-fc = 0
252 orire-tau = 0
253 orire-fitgrp =
254 ; Output frequency for trace(SD) and S to energy file
255 nstorireout = 100
256
257 ; Free energy variables
258 free-energy = no
259 couple-moltype =
260 couple-lambda0 = vdw-q
261 couple-lambda1 = vdw-q
262 couple-intramol = no
263 init-lambda = -1
264 init-lambda-state = -1
265 delta-lambda = 0
266 nstdhdl = 50
267 fep-lambdas =
268 mass-lambdas =
269 coul-lambdas =
270 vdw-lambdas =
271 bonded-lambdas =
272 restraint-lambdas =
273 temperature-lambdas =
274 calc-lambda-neighbors = 1
275 init-lambda-weights =
276 dhdl-print-energy = no
277 sc-alpha = 0
278 sc-power = 1
279 sc-r-power = 6
280 sc-sigma = 0.3
281 sc-coul = no
282 separate-dhdl-file = yes
283 dhdl-derivatives = yes
284 dh_hist_size = 0
285 dh_hist_spacing = 0.1
286
287 ; Non-equilibrium MD stuff
288 acc-grps =
289 accelerate =
290 freezegrps =
291 freezedim =
292 cos-acceleration = 0
293 deform =
294
295 ; simulated tempering variables
296 simulated-tempering = no
297 simulated-tempering-scaling = geometric
298 sim-temp-low = 300
299 sim-temp-high = 300
300
301 ; Electric fields
302 ; Format is number of terms (int) and for all terms an amplitude (real)
303 ; and a phase angle (real)
304 E-x =
305 E-xt =
306 E-y =
307 E-yt =
308 E-z =
309 E-zt =
310
311 ; Ion/water position swapping for computational electrophysiology setups
312 ; Swap positions along direction: no, X, Y, Z
313 swapcoords = no
314
315 ; AdResS parameters
316 adress = no
317
318 ; User defined thingies
319 user1-grps =
320 user2-grps =
321 userint1 = 0
322 userint2 = 0
323 userint3 = 0
324 userint4 = 0
325 userreal1 = 0
326 userreal2 = 0
327 userreal3 = 0
328 userreal4 = 0