Debian Codegraph @

regressiontests/complex/nbnxn-ljpme-LB/grompp.mdp

raw
1 ;
2 ; File 'mdout.mdp' was generated
3 ; By user: onbekend (0)
4 ; On host: onbekend
5 ; At date: Fri May 27 10:01:49 2011
6 ;
7
8 ; VARIOUS PREPROCESSING OPTIONS
9 ; Preprocessor information: use cpp syntax.
10 ; e.g.: -I/home/joe/doe -I/home/mary/roe
11 include =
12 ; e.g.: -DI_Want_Cookies -DMe_Too
13 define =
14
15 ; RUN CONTROL PARAMETERS
16 integrator = md
17 ; Start time and timestep in ps
18 tinit = 0
19 dt = 0.002
20 nsteps = 20
21 ; For exact run continuation or redoing part of a run
22 init_step = 0
23 ; Part index is updated automatically on checkpointing (keeps files separate)
24 simulation_part = 1
25 ; mode for center of mass motion removal
26 comm-mode = Linear
27 ; number of steps for center of mass motion removal
28 nstcomm = 20
29 ; group(s) for center of mass motion removal
30 comm_grps = System
31
32 ; LANGEVIN DYNAMICS OPTIONS
33 ; Friction coefficient (amu/ps) and random seed
34 bd-fric = 0
35 ld-seed = 1993
36
37 ; ENERGY MINIMIZATION OPTIONS
38 ; Force tolerance and initial step-size
39 emtol = 10
40 emstep = 0.01
41 ; Max number of iterations in relax_shells
42 niter = 20
43 ; Step size (ps^2) for minimization of flexible constraints
44 fcstep = 0
45 ; Frequency of steepest descents steps when doing CG
46 nstcgsteep = 1000
47 nbfgscorr = 10
48
49 ; TEST PARTICLE INSERTION OPTIONS
50 rtpi = 0.05
51
52 ; OUTPUT CONTROL OPTIONS
53 ; Output frequency for coords (x), velocities (v) and forces (f)
54 nstxout = 20
55 nstvout = 20
56 nstfout = 20
57 ; Output frequency for energies to log file and energy file
58 nstlog = 20
59 nstcalcenergy = 20
60 nstenergy = 20
61 ; Output frequency and precision for xtc file
62 nstxtcout = 0
63 xtc-precision = 1000
64 ; This selects the subset of atoms for the xtc file. You can
65 ; select multiple groups. By default all atoms will be written.
66 xtc-grps =
67 ; Selection of energy groups
68 energygrps =
69
70 ; NEIGHBORSEARCHING PARAMETERS
71 ; cut-off scheme (group: using charge groups, Verlet: particle based cut-offs)
72 cutoff-scheme = Verlet
73 ; nblist update frequency
74 nstlist = 1
75 ; ns algorithm (simple or grid)
76 ns_type = grid
77 ; Periodic boundary conditions: xyz, no, xy
78 pbc = xyz
79 periodic_molecules = no
80 ; Allowed error in the average pressure due to the Verlet buffer for LJ interactions
81 verlet-buffer-pressure-tolerance = -1
82 ; nblist cut-off
83 rlist = 1.0
84 ; long-range cut-off for switched potentials
85 rlistlong = -1
86
87 ; OPTIONS FOR ELECTROSTATICS AND VDW
88 ; Method for doing electrostatics
89 coulombtype = PME
90 rcoulomb-switch = 0
91 rcoulomb = 1.0
92 ; Relative dielectric constant for the medium and the reaction field
93 epsilon_r = 1
94 epsilon_rf = 1
95 ; Method for doing Van der Waals
96 vdw-type = PME
97 ;cut-off lengths
98 rvdw-switch = 0
99 rvdw = 1.0
100 ; Apply long range dispersion corrections for Energy and Pressure
101 dispcorr =
102 ; Extension of the potential lookup tables beyond the cut-off
103 table-extension = 1
104 ; Seperate tables between energy group pairs
105 energygrp_table =
106 ; Spacing for the PME/PPPM FFT grid
107 fourierspacing = 0.12
108 ; FFT grid size, when a value is 0 fourierspacing will be used
109 fourier_nx = 0
110 fourier_ny = 0
111 fourier_nz = 0
112 ; EWALD/PME/PPPM parameters
113 pme_order = 4
114 ewald-rtol = 1e-05
115 ewald-rtol-lj = 0.001
116 ewald_geometry = 3d
117 epsilon_surface = 0
118 optimize_fft = no
119 lj-pme-comb-rule = Lorentz-Berthelot
120
121 ; IMPLICIT SOLVENT ALGORITHM
122 implicit_solvent = No
123
124 ; GENERALIZED BORN ELECTROSTATICS
125 ; Algorithm for calculating Born radii
126 gb_algorithm = Still
127 ; Frequency of calculating the Born radii inside rlist
128 nstgbradii = 1
129 ; Cutoff for Born radii calculation; the contribution from atoms
130 ; between rlist and rgbradii is updated every nstlist steps
131 rgbradii = 1
132 ; Dielectric coefficient of the implicit solvent
133 gb_epsilon_solvent = 80
134 ; Salt concentration in M for Generalized Born models
135 gb_saltconc = 0
136 ; Scaling factors used in the OBC GB model. Default values are OBC(II)
137 gb_obc_alpha = 1
138 gb_obc_beta = 0.8
139 gb_obc_gamma = 4.85
140 gb_dielectric_offset = 0.009
141 sa_algorithm = Ace-approximation
142 ; Surface tension (kJ/mol/nm^2) for the SA (nonpolar surface) part of GBSA
143 ; The value -1 will set default value for Still/HCT/OBC GB-models.
144 sa_surface_tension = -1
145
146 ; OPTIONS FOR WEAK COUPLING ALGORITHMS
147 ; Temperature coupling
148 tcoupl = nose-hoover
149 nsttcouple = 1
150 nh-chain-length = 1
151 ; Groups to couple separately
152 tc-grps = System
153 ; Time constant (ps) and reference temperature (K)
154 tau-t = 0.4
155 ref-t = 298
156 ; Pressure coupling
157 Pcoupl = Parrinello-Rahman
158 Pcoupltype = isotropic
159 nstpcouple = 1
160 ; Time constant (ps), compressibility (1/bar) and reference P (bar)
161 tau-p = 1
162 compressibility = 4.5e-5
163 ref-p = 1.0
164 ; Scaling of reference coordinates, No, All or COM
165 refcoord_scaling = No
166 ; Random seed for Andersen thermostat
167 andersen_seed = 815131
168
169 ; Optimization of QM subsystem
170 bOPT =
171 bTS =
172
173 ; SIMULATED ANNEALING
174 ; Type of annealing for each temperature group (no/single/periodic)
175 annealing =
176 ; Number of time points to use for specifying annealing in each group
177 annealing_npoints =
178 ; List of times at the annealing points for each group
179 annealing_time =
180 ; Temp. at each annealing point, for each group.
181 annealing_temp =
182
183 ; GENERATE VELOCITIES FOR STARTUP RUN
184 gen-vel = no
185 gen-temp = 300
186 gen-seed = 173529
187
188 ; OPTIONS FOR BONDS
189 constraints = all-bonds
190 ; Type of constraint algorithm
191 constraint-algorithm = Lincs
192 ; Do not constrain the start configuration
193 continuation = no
194 ; Use successive overrelaxation to reduce the number of shake iterations
195 Shake-SOR = no
196 ; Relative tolerance of shake
197 shake-tol = 0.0001
198 ; Highest order in the expansion of the constraint coupling matrix
199 lincs-order = 4
200 ; Number of iterations in the final step of LINCS. 1 is fine for
201 ; normal simulations, but use 2 to conserve energy in NVE runs.
202 ; For energy minimization with constraints it should be 4 to 8.
203 lincs-iter = 1
204 ; Lincs will write a warning to the stderr if in one step a bond
205 ; rotates over more degrees than
206 lincs-warnangle = 30
207 ; Convert harmonic bonds to morse potentials
208 morse = no
209
210 ; ENERGY GROUP EXCLUSIONS
211 ; Pairs of energy groups for which all non-bonded interactions are excluded
212 energygrp_excl =
213
214 ; WALLS
215 ; Number of walls, type, atom types, densities and box-z scale factor for Ewald
216 nwall = 0
217 wall_type = 9-3
218 wall_r_linpot = -1
219 wall_atomtype =
220 wall_density =
221 wall_ewald_zfac = 3
222
223 ; COM PULLING
224 ; Pull type: no, umbrella, constraint or constant_force
225 pull = no
226
227 ; NMR refinement stuff
228 ; Distance restraints type: No, Simple or Ensemble
229 disre = No
230 ; Force weighting of pairs in one distance restraint: Conservative or Equal
231 disre-weighting = Conservative
232 ; Use sqrt of the time averaged times the instantaneous violation
233 disre-mixed = no
234 disre-fc = 1000
235 disre-tau = 0
236 ; Output frequency for pair distances to energy file
237 nstdisreout = 100
238 ; Orientation restraints: No or Yes
239 orire = no
240 ; Orientation restraints force constant and tau for time averaging
241 orire-fc = 0
242 orire-tau = 0
243 orire-fitgrp =
244 ; Output frequency for trace(SD) and S to energy file
245 nstorireout = 100
246 ; Dihedral angle restraints: No or Yes
247 dihre = no
248 dihre-fc = 1000
249
250 ; Free energy control stuff
251 free-energy = no
252 init-lambda = 0
253 delta-lambda = 0.01
254 foreign_lambda =
255 sc-alpha = 0
256 sc-power = 0
257 sc-sigma = 0.3
258 nstdhdl = 10
259 separate-dhdl-file = yes
260 dhdl-derivatives = yes
261 dh_hist_size = 0
262 dh_hist_spacing = 0.1
263 couple-moltype =
264 couple-lambda0 = q
265 couple-lambda1 = vdw-q
266 couple-intramol = no
267
268 ; Non-equilibrium MD stuff
269 acc-grps =
270 accelerate =
271 freezegrps =
272 freezedim =
273 cos-acceleration = 0
274 deform =
275
276 ; Electric fields
277 ; Format is number of terms (int) and for all terms an amplitude (real)
278 ; and a phase angle (real)
279 E-x =
280 E-xt =
281 E-y =
282 E-yt =
283 E-z =
284 E-zt =
285
286 ; User defined thingies
287 user1-grps =
288 user2-grps =
289 userint1 = 0
290 userint2 = 0
291 userint3 = 0
292 userint4 = 0
293 userreal1 = 0
294 userreal2 = 0
295 userreal3 = 0
296 userreal4 = 0