Debian Codegraph @

regressiontests/complex/nbnxn-energy-groups/grompp.mdp

raw
1 ;
2 ; File 'mdout.mdp' was generated
3 ; By user: mark (1302)
4 ; On host: amd2
5 ; At date: Wed Dec 19 13:43:21 2012
6 ;
7
8 ; VARIOUS PREPROCESSING OPTIONS
9 ; Preprocessor information: use cpp syntax.
10 ; e.g.: -I/home/joe/doe -I/home/mary/roe
11 include =
12 ; e.g.: -DPOSRES -DFLEXIBLE (note these variable names are case sensitive)
13 define =
14
15 ; RUN CONTROL PARAMETERS
16 integrator = md
17 ; Start time and timestep in ps
18 tinit = 0
19 dt = 0.002
20 nsteps = 20
21 ; For exact run continuation or redoing part of a run
22 init_step = 0
23 ; Part index is updated automatically on checkpointing (keeps files separate)
24 simulation-part = 1
25 ; mode for center of mass motion removal
26 comm-mode = linear
27 ; number of steps for center of mass motion removal
28 nstcomm = 20
29 ; group(s) for center of mass motion removal
30 comm-grps =
31
32 ; LANGEVIN DYNAMICS OPTIONS
33 ; Friction coefficient (amu/ps) and random seed
34 bd-fric = 0
35 ld-seed = 1993
36
37 ; ENERGY MINIMIZATION OPTIONS
38 ; Force tolerance and initial step-size
39 emtol = 10
40 emstep = 0.01
41 ; Max number of iterations in relax-shells
42 niter = 20
43 ; Step size (ps^2) for minimization of flexible constraints
44 fcstep = 0
45 ; Frequency of steepest descents steps when doing CG
46 nstcgsteep = 1000
47 nbfgscorr = 10
48
49 ; TEST PARTICLE INSERTION OPTIONS
50 rtpi = 0.05
51
52 ; OUTPUT CONTROL OPTIONS
53 ; Output frequency for coords (x), velocities (v) and forces (f)
54 nstxout = 20
55 nstvout = 20
56 nstfout = 20
57 ; Output frequency for energies to log file and energy file
58 nstlog = 20
59 nstcalcenergy = 20
60 nstenergy = 20
61 ; Output frequency and precision for .xtc file
62 nstxtcout = 0
63 xtc-precision = 1000
64 ; This selects the subset of atoms for the .xtc file. You can
65 ; select multiple groups. By default all atoms will be written.
66 xtc-grps =
67 ; Selection of energy groups
68 energygrps = HEX
69
70 ; NEIGHBORSEARCHING PARAMETERS
71 ; cut-off scheme (group: using charge groups, Verlet: particle based cut-offs)
72 cutoff-scheme = verlet
73 ; nblist update frequency
74 nstlist = 10
75 ; ns algorithm (simple or grid)
76 ns_type = grid
77 ; Periodic boundary conditions: xyz, no, xy
78 pbc = xyz
79 periodic-molecules = no
80 ; Allowed energy drift due to the Verlet buffer in kJ/mol/ps per atom,
81 ; a value of -1 means: use rlist
82 verlet-buffer-drift = 0.005
83 ; Allowed error in the average pressure due to the Verlet buffer for LJ interactions
84 verlet-buffer-pressure-tolerance = -1
85 ; nblist cut-off
86 rlist = 0.9
87 ; long-range cut-off for switched potentials
88 rlistlong = -1
89 nstcalclr = -1
90
91 ; OPTIONS FOR ELECTROSTATICS AND VDW
92 ; Method for doing electrostatics
93 coulombtype = PME
94 coulomb-modifier = Potential-shift-Verlet
95 rcoulomb-switch = 0
96 rcoulomb = 0.9
97 ; Relative dielectric constant for the medium and the reaction field
98 epsilon-r = 1
99 epsilon-rf = 0
100 ; Method for doing Van der Waals
101 vdw-type = cut-off
102 vdw-modifier = Potential-shift-Verlet
103 ; cut-off lengths
104 rvdw-switch = 0
105 rvdw = 0.9
106 ; Apply long range dispersion corrections for Energy and Pressure
107 DispCorr = EnerPres
108 ; Extension of the potential lookup tables beyond the cut-off
109 table-extension = 1
110 ; Seperate tables between energy group pairs
111 energygrp-table =
112 ; Spacing for the PME/PPPM FFT grid
113 fourierspacing = 0.12
114 ; FFT grid size, when a value is 0 fourierspacing will be used
115 fourier_nx = 56
116 fourier_ny = 28
117 fourier_nz = 28
118 ; EWALD/PME/PPPM parameters
119 pme_order = 4
120 ewald_rtol = 1e-05
121 ewald-geometry = 3d
122 epsilon_surface = 0
123 optimize_fft = no
124
125 ; IMPLICIT SOLVENT ALGORITHM
126 implicit-solvent = No
127
128 ; GENERALIZED BORN ELECTROSTATICS
129 ; Algorithm for calculating Born radii
130 gb-algorithm = Still
131 ; Frequency of calculating the Born radii inside rlist
132 nstgbradii = 1
133 ; Cutoff for Born radii calculation; the contribution from atoms
134 ; between rlist and rgbradii is updated every nstlist steps
135 rgbradii = 1
136 ; Dielectric coefficient of the implicit solvent
137 gb-epsilon-solvent = 80
138 ; Salt concentration in M for Generalized Born models
139 gb-saltconc = 0
140 ; Scaling factors used in the OBC GB model. Default values are OBC(II)
141 gb-obc-alpha = 1
142 gb-obc-beta = 0.8
143 gb-obc-gamma = 4.85
144 gb-dielectric-offset = 0.009
145 sa-algorithm = Ace-approximation
146 ; Surface tension (kJ/mol/nm^2) for the SA (nonpolar surface) part of GBSA
147 ; The value -1 will set default value for Still/HCT/OBC GB-models.
148 sa-surface-tension = -1
149
150 ; OPTIONS FOR WEAK COUPLING ALGORITHMS
151 ; Temperature coupling
152 Tcoupl = v-rescale
153 nsttcouple = 10
154 nh-chain-length = 10
155 print-nose-hoover-chain-variables = no
156 ; Groups to couple separately
157 tc-grps = System
158 ; Time constant (ps) and reference temperature (K)
159 tau_t = 0.5
160 ref_t = 298
161 ; pressure coupling
162 pcoupl = No
163 Pcoupltype = isotropic
164 nstpcouple = -1
165 ; Time constant (ps), compressibility (1/bar) and reference P (bar)
166 tau_p = 2.0
167 compressibility = 4.5e-5
168 ref_p = 1.0
169 ; Scaling of reference coordinates, No, All or COM
170 refcoord-scaling = No
171
172 ; Optimization of QM subsystem
173 bOPT =
174 bTS =
175
176 ; SIMULATED ANNEALING
177 ; Type of annealing for each temperature group (no/single/periodic)
178 annealing =
179 ; Number of time points to use for specifying annealing in each group
180 annealing-npoints =
181 ; List of times at the annealing points for each group
182 annealing-time =
183 ; Temp. at each annealing point, for each group.
184 annealing-temp =
185
186 ; GENERATE VELOCITIES FOR STARTUP RUN
187 gen-vel = no
188 gen-temp = 300
189 gen-seed = 173529
190
191 ; OPTIONS FOR BONDS
192 constraints = all-bonds
193 ; Type of constraint algorithm
194 constraint-algorithm = Lincs
195 ; Do not constrain the start configuration
196 continuation = no
197 ; Use successive overrelaxation to reduce the number of shake iterations
198 Shake-SOR = no
199 ; Relative tolerance of shake
200 shake-tol = 1e-04
201 ; Highest order in the expansion of the constraint coupling matrix
202 lincs-order = 4
203 ; Number of iterations in the final step of LINCS. 1 is fine for
204 ; normal simulations, but use 2 to conserve energy in NVE runs.
205 ; For energy minimization with constraints it should be 4 to 8.
206 lincs-iter = 1
207 ; Lincs will write a warning to the stderr if in one step a bond
208 ; rotates over more degrees than
209 lincs-warnangle = 30
210 ; Convert harmonic bonds to morse potentials
211 morse = no
212
213 ; ENERGY GROUP EXCLUSIONS
214 ; Pairs of energy groups for which all non-bonded interactions are excluded
215 energygrp-excl =
216
217 ; WALLS
218 ; Number of walls, type, atom types, densities and box-z scale factor for Ewald
219 nwall = 0
220 wall-type = 9-3
221 wall-r-linpot = -1
222 wall-atomtype =
223 wall-density =
224 wall-ewald-zfac = 3
225
226 ; COM PULLING
227 ; Pull type: no, umbrella, constraint or constant-force
228 pull = no
229
230 ; ENFORCED ROTATION
231 ; Enforced rotation: No or Yes
232 rotation = no
233
234 ; NMR refinement stuff
235 ; Distance restraints type: No, Simple or Ensemble
236 disre = No
237 ; Force weighting of pairs in one distance restraint: Conservative or Equal
238 disre-weighting = Conservative
239 ; Use sqrt of the time averaged times the instantaneous violation
240 disre-mixed = no
241 disre-fc = 1000
242 disre-tau = 0
243 ; Output frequency for pair distances to energy file
244 nstdisreout = 100
245 ; Orientation restraints: No or Yes
246 orire = no
247 ; Orientation restraints force constant and tau for time averaging
248 orire-fc = 0
249 orire-tau = 0
250 orire-fitgrp =
251 ; Output frequency for trace(SD) and S to energy file
252 nstorireout = 100
253
254 ; Free energy variables
255 free-energy = no
256 couple-moltype =
257 couple-lambda0 = vdw-q
258 couple-lambda1 = vdw-q
259 couple-intramol = no
260 init-lambda = -1
261 init-lambda-state = 0
262 delta-lambda = 0
263 nstdhdl = 100
264 fep-lambdas =
265 mass-lambdas =
266 coul-lambdas =
267 vdw-lambdas =
268 bonded-lambdas =
269 restraint-lambdas =
270 temperature-lambdas =
271 init-lambda-weights =
272 dhdl-print-energy = no
273 sc-alpha = 0
274 sc-power = 1
275 sc-r-power = 6
276 sc-sigma = 0.3
277 sc-coul = no
278 separate-dhdl-file = yes
279 dhdl-derivatives = yes
280 dh_hist_size = 0
281 dh_hist_spacing = 0.1
282
283 ; Non-equilibrium MD stuff
284 acc-grps =
285 accelerate =
286 freezegrps =
287 freezedim =
288 cos-acceleration = 0
289 deform =
290
291 ; simulated tempering variables
292 simulated-tempering = no
293 simulated-tempering-scaling = geometric
294 sim-temp-low = 300
295 sim-temp-high = 300
296
297 ; Electric fields
298 ; Format is number of terms (int) and for all terms an amplitude (real)
299 ; and a phase angle (real)
300 E-x =
301 E-xt =
302 E-y =
303 E-yt =
304 E-z =
305 E-zt =
306
307 ; AdResS parameters
308 adress = no
309
310 ; User defined thingies
311 user1-grps =
312 user2-grps =
313 userint1 = 0
314 userint2 = 0
315 userint3 = 0
316 userint4 = 0
317 userreal1 = 0
318 userreal2 = 0
319 userreal3 = 0
320 userreal4 = 0