| 1 |
# Filename: /etc/debootstrap/config |
| 2 |
# Purpose: configuration file for grml-debootstrap |
| 3 |
# Authors: grml-team (grml.org), (c) Michael Prokop <[email protected]> |
| 4 |
# Bug-Reports: see https://grml.org/bugs/ |
| 5 |
# License: This file is licensed under the GPL v2 or any later version. |
| 6 |
################################################################################ |
| 7 |
# shellcheck shell=sh |
| 8 |
|
| 9 |
################################################################################ |
| 10 |
# Important: adjust this file if you want to execute grml-debootstrap |
| 11 |
# without using the (limited) interactive frontend or |
| 12 |
# command line options (see manpage and grml-debootstrap --help) |
| 13 |
################################################################################ |
| 14 |
|
| 15 |
# Where should Debian be installed to? |
| 16 |
# Usually you want to use a partition. |
| 17 |
# If you specify a string *without* /dev/ in the beginning, grml-debootstrap |
| 18 |
# assumes you want to install Debian into a directory. MKFS, TUNE2FS, GRUB and |
| 19 |
# FSCK will be ignored. |
| 20 |
# Make sure the TARGET-directory points to a filesystem which has the dev, exec |
| 21 |
# options enabled. |
| 22 |
# Default: no default. |
| 23 |
# Usage examples: |
| 24 |
# TARGET='/dev/sda1' # install to partition /dev/sda1 |
| 25 |
# TARGET='/mnt/grml' # install into directory /mnt/grml |
| 26 |
|
| 27 |
# Install the grub bootloader? |
| 28 |
# Default: 'yes' |
| 29 |
# Usage example: |
| 30 |
# GRUB_INSTALL='no' # Do not install the grub bootloader. |
| 31 |
|
| 32 |
# Specify the device where grub will be installed. |
| 33 |
# Note: grub can not be installed into a partition. |
| 34 |
# Default: no default. (Grub will not be installed.) |
| 35 |
# Usage example: |
| 36 |
# GRUB='/dev/sda' # Install into MBR of sda |
| 37 |
|
| 38 |
# Additional kernel boot options. (For grub.) |
| 39 |
# Default: no default. |
| 40 |
# Usage example: |
| 41 |
# BOOT_APPEND='pci=nomsi' |
| 42 |
|
| 43 |
# Set mirror where packages will be downloaded from. |
| 44 |
# Default: use /etc/debootstrap/etc/apt/sources.list.d/debian.sources if it |
| 45 |
# exists, else use /etc/debootstrap/etc/apt/sources.list if it exists, else |
| 46 |
# use 'http://deb.debian.org/debian' |
| 47 |
# Usage example: |
| 48 |
# MIRROR='ftp://ftp.de.debian.org/debian' |
| 49 |
|
| 50 |
# If /etc/apt/sources.list.d/debian.sources should NOT be built on the fly, |
| 51 |
# this option allows providing a separate apt sources.list file via |
| 52 |
# /etc/debootstrap/etc/apt/sources.list, or providing a deb822-format sources |
| 53 |
# file via /etc/debootstrap/etc/apt/sources.list.d/debian.sources. |
| 54 |
# KEEP_SRC_LIST='yes' |
| 55 |
|
| 56 |
# To enable the Grml repository via /etc/apt/sources.list.d/grml.sources |
| 57 |
# set this variable to 'yes'. |
| 58 |
# Default: 'no' |
| 59 |
# GRMLREPOS='yes' |
| 60 |
|
| 61 |
# Install packages from grml-repository? |
| 62 |
# Requires activated $GRMLREPOS from above. If empty nothing will be added. |
| 63 |
# Default: no default. |
| 64 |
# GRMLPACKAGES='grml-etc-core' |
| 65 |
|
| 66 |
# To enable Debian's backports repository via |
| 67 |
# /etc/apt/sources.list.d/backports.sources set this variable to 'yes'. |
| 68 |
# Default: 'no' |
| 69 |
# BACKPORTREPOS='yes' |
| 70 |
|
| 71 |
# Debian release that should be installed. |
| 72 |
# Supported values: bookworm, trixie, forky, sid |
| 73 |
# Default: 'trixie' |
| 74 |
# RELEASE='trixie' |
| 75 |
|
| 76 |
# Define components that should be used within sources.list.d/debian.sources. |
| 77 |
# Default: 'main' |
| 78 |
# COMPONENTS='main contrib non-free' |
| 79 |
|
| 80 |
# Set target architecture. |
| 81 |
# Default: current architecture. (From 'dpkg --print-architecture'.) |
| 82 |
# ARCH='amd64' |
| 83 |
|
| 84 |
# Hostname of new system. |
| 85 |
# Default: $HOSTNAME or if unset 'grml' |
| 86 |
# HOSTNAME='grml' |
| 87 |
|
| 88 |
# Kernel version to install. |
| 89 |
# Default: according to current architecture. |
| 90 |
# KERNEL='2.6-686' |
| 91 |
|
| 92 |
# Set initial password for the root user. |
| 93 |
# Please change this password after installation for security reasons. |
| 94 |
# Default: no default. |
| 95 |
# ROOTPASSWORD='' |
| 96 |
|
| 97 |
# Pass extra options to mmdebstrap. |
| 98 |
# Default: no default. |
| 99 |
# Usage example: |
| 100 |
# DEBOOTSTRAP_OPT='--include=debconf-utils,locales,pciutils --exclude=nano,tasksel,tasksel-data,iptables' |
| 101 |
|
| 102 |
# debconf-frontend that should be used. |
| 103 |
# Default: 'noninteractive' |
| 104 |
# DEBIAN_FRONTEND='noninteractive' |
| 105 |
|
| 106 |
# Pass extra options to aptitude/apt-get. |
| 107 |
# Default: no default. |
| 108 |
# DPKG_OPTIONS='-o APT::Get::AllowUnauthenticated=true -o aptitude::Cmdline::ignore-trust-violations=yes' |
| 109 |
|
| 110 |
# Use custom grml-debootstrap stages. |
| 111 |
# Specify path to your custom grml-debootstrap stages. |
| 112 |
# Default: '/var/cache/grml-debootstrap' |
| 113 |
# STAGES='/var/cache/grml-debootstrap' |
| 114 |
|
| 115 |
# Install packages defined in /etc/debootstrap/packages. |
| 116 |
# Default: 'yes' |
| 117 |
# PACKAGES='no' |
| 118 |
|
| 119 |
# Pre-seed DebConf questions from /etc/debootstrap/debconf-selections. |
| 120 |
# Default: 'yes' (if file exists) |
| 121 |
# DEBCONF='no' |
| 122 |
|
| 123 |
# Run scripts from /etc/debootstrap/pre-scripts/ before creating the chroot. |
| 124 |
# Default: 'yes' |
| 125 |
# PRE_SCRIPTS='no' |
| 126 |
|
| 127 |
# Run scripts from /etc/debootstrap/chroot-scripts/ inside chroot. |
| 128 |
# Default: 'yes' |
| 129 |
# CHROOT_SCRIPTS='no' |
| 130 |
|
| 131 |
# Run scripts from /etc/debootstrap/post-scripts/ after setting up chroot. |
| 132 |
# Default: 'yes' |
| 133 |
# POST_SCRIPTS='no' |
| 134 |
|
| 135 |
# Install *.deb packages from /etc/debootstrap/extrapackages/ |
| 136 |
# Default: 'yes' |
| 137 |
# EXTRAPACKAGES='no' |
| 138 |
|
| 139 |
# Location of config files for debootstrap. |
| 140 |
# Default: '/etc/debootstrap' |
| 141 |
# CONFFILES='/etc/debootstrap' |
| 142 |
|
| 143 |
# Mount point to use during installation. |
| 144 |
# Default: no default. |
| 145 |
# MNTPOINT='/mnt/debootstrap' |
| 146 |
|
| 147 |
# File system creation tool to apply on $TARGET. |
| 148 |
# If empty, no file system will be created. |
| 149 |
# Default: 'mkfs.ext4' |
| 150 |
# MKFS='' |
| 151 |
|
| 152 |
# Command line options for file system creation tool. |
| 153 |
# Default: no default. |
| 154 |
# MKFS_OPTS='' |
| 155 |
|
| 156 |
# Filesystem tuning tool to apply on $TARGET. |
| 157 |
# If empty, the created file system will not be tuned. |
| 158 |
# Default: 'tune2fs -c0 -i0' if ext* filesystem is used, no default otherwise. |
| 159 |
# TUNE2FS='tune2fs -c0 -i0' |
| 160 |
|
| 161 |
# Check file system after installation is finished. |
| 162 |
# Default: 'no' |
| 163 |
# FSCK='yes' |
| 164 |
|
| 165 |
# File system checking tool to apply on $TARGET. |
| 166 |
# Default: guessed. |
| 167 |
# FSCKTOOL='' |
| 168 |
|
| 169 |
# Packages that should be 'dpkg-reconfigure'-ed while installation. |
| 170 |
# Default: 'console-data'. |
| 171 |
# RECONFIGURE='console-data' |
| 172 |
|
| 173 |
# Generate locales using /etc/debootstrap/locale.gen configuration file. |
| 174 |
# Default: 'yes' |
| 175 |
# LOCALES='no' |
| 176 |
|
| 177 |
# locales (LANG) that should be used as default. |
| 178 |
# Default: 'en_US.UTF-8' |
| 179 |
# DEFAULT_LOCALES='en_US.UTF-8' |
| 180 |
|
| 181 |
# locales (LANGUAGE) that should be used as default. |
| 182 |
# Default: 'en_US:en' |
| 183 |
# DEFAULT_LANGUAGE='en_US:en' |
| 184 |
|
| 185 |
# Use /usr/share/zoneinfo/$TIMEZONE for /etc/localtime. |
| 186 |
# Default: 'Europe/Vienna' |
| 187 |
# TIMEZONE='Europe/Vienna' |
| 188 |
|
| 189 |
# Clean APT cache after installation is finished. |
| 190 |
# Default: 'yes' |
| 191 |
# RM_APTCACHE='no' |
| 192 |
|
| 193 |
# Upgrade system via apt-get/aptitude update + [safe-]upgrade. |
| 194 |
# Default: 'yes' |
| 195 |
# UPGRADE_SYSTEM='no' |
| 196 |
|
| 197 |
# Explicit generation of initrd via selected initrd generator. |
| 198 |
# Default: 'yes' |
| 199 |
# INITRD='no' |
| 200 |
|
| 201 |
# Which generator to use for initrd creation. |
| 202 |
# Supported values: 'dracut', 'initramfs-tools' |
| 203 |
# Default: 'initramfs-tools' |
| 204 |
# INITRD_GENERATOR='initramfs-tools' |
| 205 |
|
| 206 |
# Pass extra options to the selected initrd generator |
| 207 |
# Default: no default |
| 208 |
# INITRD_GENERATOR_OPTS='-v' |
| 209 |
|
| 210 |
# If the specified file exists its content will be displayed at the end of the |
| 211 |
# installation process. |
| 212 |
# Useful for checking for errors and display warning message. |
| 213 |
# Default: '/etc/debootstrap/install_notes' (empty file). |
| 214 |
# INSTALL_NOTES='/etc/debootstrap/install_notes' |
| 215 |
|
| 216 |
# Use fixed disk identifiers for Virtual Machine builds. |
| 217 |
# Useful for reproducible builds. |
| 218 |
# Default: 'no' |
| 219 |
# FIXED_DISK_IDENTIFIERS='yes' |
| 220 |
|
| 221 |
# Disk identifier when using FIXED_DISK_IDENTIFIERS='yes'. |
| 222 |
# Use uuid-runtime's uuidgen tool to generate random UUIDs on demand. |
| 223 |
# Default: '26ada0c0-1165-4098-884d-aafd2220c2c6' |
| 224 |
# DISK_IDENTIFIER="$(uuidgen)" |
| 225 |
|
| 226 |
# Delete grml-debootstrap configuration files from installed system. |
| 227 |
# Useful for reproducible builds or if you don't want to leak information. |
| 228 |
# Default: 'no' |
| 229 |
# REMOVE_CONFIGS='yes' |
| 230 |
|
| 231 |
## END OF FILE ################################################################# |