Debian Codegraph @

graboutput.log.reference

raw
1 [0.000000 0.000000]
2 [0.000647 0.000647] U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)
3 [0.330675 0.330028] reading args
4 [0.335320 0.004645] spl_load_image_fat_os: error reading image args, err - -1
5 [0.339893 0.004573] reading u-boot.img
6 [0.344597 0.004704] reading u-boot.img
7 [0.389410 0.044813]
8 [0.389556 0.000146]
9 [0.389623 0.000067] U-Boot 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)
10 [0.393984 0.004361]
11 [0.394056 0.000072] I2C: ready
12 [0.447928 0.053872] DRAM: 512 MiB
13 [0.785153 0.337225] NAND: 0 MiB
14 [0.876976 0.091823] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
15 [0.879560 0.002584] *** Warning - readenv() failed, using default environment
16 [0.885290 0.005730]
17 [0.969131 0.083841] Net: <ethaddr> not set. Validating first E-fuse MAC
18 [1.025154 0.056023] cpsw, usb_ether
19 [1.025907 0.000753] Hit any key to stop autoboot: 1  0
20 [2.032774 1.006867] gpio: pin 53 (gpio 53) value is 1
21 [2.207505 0.174731] mmc0 is current device
22 [2.273319 0.065814] gpio: pin 54 (gpio 54) value is 1
23 [2.275846 0.002527] SD/MMC found on device 0
24 [2.281898 0.006052] reading uEnv.txt
25 [2.286196 0.004298] 33 bytes read in 5 ms (5.9 KiB/s)
26 [2.288833 0.002637] gpio: pin 55 (gpio 55) value is 1
27 [2.292949 0.004116] Loaded environment from uEnv.txt
28 [2.294813 0.001864] Importing environment from mmc ...
29 [2.298540 0.003727] Checking if uenvcmd is set ...
30 [2.302326 0.003786]
31 [2.302399 0.000073] uenvcmd was not defined in uEnv.txt ...
32 [2.306499 0.004100] gpio: pin 56 (gpio 56) value is 0
33 [2.308996 0.002497] gpio: pin 55 (gpio 55) value is 0
34 [2.312571 0.003575] gpio: pin 54 (gpio 54) value is 0
35 [2.369489 0.056918] mmc1(part 0) is current device
36 [2.425473 0.055984] gpio: pin 54 (gpio 54) value is 1
37 [2.428027 0.002554] SD/MMC found on device 1
38 [2.433164 0.005137] reading uEnv.txt
39 [2.439012 0.005848] 1899 bytes read in 6 ms (308.6 KiB/s)
40 [2.441632 0.002620] gpio: pin 55 (gpio 55) value is 1
41 [2.445302 0.003670] Loaded environment from uEnv.txt
42 [2.447814 0.002512] Importing environment from mmc ...
43 [2.451679 0.003865] Checking if uenvcmd is set ...
44 [2.455552 0.003873] gpio: pin 56 (gpio 56) value is 1
45 [2.458185 0.002633] Running uenvcmd ...
46 [2.463635 0.005450] reading zImage
47 [2.739455 0.275820] 4103240 bytes read in 276 ms (14.2 MiB/s)
48 [2.745402 0.005947] reading initrd.img
49 [2.932126 0.186724] 2952604 bytes read in 187 ms (15.1 MiB/s)
50 [2.938498 0.006372] reading /dtbs/am335x-boneblack.dtb
51 [2.948970 0.010472] 25926 bytes read in 11 ms (2.2 MiB/s)
52 [2.955252 0.006282] Kernel image @ 0x82000000 [ 0x000000 - 0x3e9c48 ]
53 [2.959553 0.004301] ## Flattened Device Tree blob at 88000000
54 [2.962413 0.002860] Booting using the fdt blob at 0x88000000
55 [2.967799 0.005386] Using Device Tree in place at 88000000, end 88009545
56 [2.974176 0.006377]
57 [2.974300 0.000124] Starting kernel ...
58 [0.001948 0.001948]
59 [0.007345 0.005397] Uncompressing Linux... done, booting the kernel.
60 [2.391972 2.384627] [ 0.378676] omap2_mbox_probe: platform not supported
61 [2.396538 0.004566] [ 0.533193] tps65217-bl tps65217-bl: no platform data provided
62 [2.453207 0.056669] [ 0.597084] bone-capemgr bone_capemgr.9: slot #0: No cape found
63 [2.490287 0.037080] [ 0.634193] bone-capemgr bone_capemgr.9: slot #1: No cape found
64 [2.527358 0.037071] [ 0.671300] bone-capemgr bone_capemgr.9: slot #2: No cape found
65 [2.564520 0.037162] [ 0.708410] bone-capemgr bone_capemgr.9: slot #3: No cape found
66 [2.579166 0.014646] [ 0.723036] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)
67 [2.587908 0.008742] [ 0.732661] bone-capemgr bone_capemgr.9: slot #6: Failed verification
68 [2.594316 0.006408] [ 0.739415] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
69 [2.613014 0.018698] [ 0.756947] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
70 [2.676103 0.063089] [ 0.820017] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
71 [2.686928 0.010825] [ 0.831706] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
72 [2.694869 0.007941] [ 0.838997] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
73 [2.917254 0.222385] Loading, please wait...
74 [4.216810 1.299556] Scanning for Btrfs filesystems
75 [6.843341 2.626531] systemd-fsck[209]: rootfs: clean, 70111/111104 files, 348574/444160 blocks
76 [10.974941 4.131600] [ 9.119225] libphy: PHY 4a101000.mdio:01 not found
77 [10.979461 0.004520] [ 9.124383] net eth0: phy 4a101000.mdio:01 not found on slave 1
78 [20.954787 9.975326]
79 [20.954943 0.000156] Debian GNU/Linux 7 beaglebone ttyO0
80 [20.985497 0.030554]
81 [20.989391 0.003894] default username:password is [debian:temppwd]
82 [21.087601 0.098210]
83 [21.092766 0.005165] Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian
84 [21.253134 0.160368]
85 [21.255949 0.002815] The IP Address for eth0 is: 10.0.1.74
86 [21.540393 0.284444] The IP Address for usb0 is: 192.168.7.2
87 [21.623758 0.083365] beaglebone login
88 The instantpat: "done," was matched at 1.780933