Debian Codegraph @

i386/i386at/boothdr.S

raw
1
2 #include <mach/machine/asm.h>
3 #include <mach/machine/multiboot.h>
4 #include <i386/apic.h>
5 #include <i386/seg.h>
6 #include <i386/i386asm.h>
7
8 #define BOOT_CS 0x8
9 #define BOOT_DS 0x10
10
11 #ifdef __ELF__
12 #define AOUT_KLUDGE 0
13 #else
14 #define AOUT_KLUDGE MULTIBOOT_AOUT_KLUDGE
15 #endif /* __ELF__ */
16 #define MULTIBOOT_FLAGS MULTIBOOT_PAGE_ALIGN | MULTIBOOT_MEMORY_INFO | MULTIBOOT_VIDEO_MODE | AOUT_KLUDGE
17
18 /*
19 * This section will be put first into .text. See also i386/ldscript.
20 */
21 .section .text.start,"ax"
22
23 /* We should never be entered this way. */
24 .globl start,_start
25 start:
26 _start:
27 jmp boot_entry
28
29 /* MultiBoot header - see multiboot.h. */
30 P2ALIGN(2)
31 boot_hdr:
32 .long MULTIBOOT_MAGIC
33 .long MULTIBOOT_FLAGS
34 /*
35 * The next item here is the checksum.
36 * XX this works OK until we need at least the 30th bit.
37 */
38 .long - (MULTIBOOT_MAGIC+MULTIBOOT_FLAGS)
39 #ifndef __ELF__ /* a.out kludge */
40 .long boot_hdr /* header_addr */
41 .long _start /* load_addr */
42 .long _edata /* load_end_addr */
43 .long _end /* bss_end_addr */
44 .long boot_entry /* entry */
45 #else
46 .long 0
47 .long 0
48 .long 0
49 .long 0
50 .long 0
51 #endif /* __ELF__ */
52 .long MULTIBOOT_VIDEO_MODE_TYPE_EGA_TEXT
53 .long 80
54 .long 25
55 .long MULTIBOOT_VIDEO_PARAM_NO_PREFERENCE
56
57 boot_entry:
58 movl $percpu_array - KERNELBASE, %eax
59 movw %ax, boot_percpu_low - KERNELBASE
60 shr $16, %eax
61 movb %al, boot_percpu_med - KERNELBASE
62 shr $8, %ax
63 movb %al, boot_percpu_high - KERNELBASE
64
65 /* use segmentation to offset ourself. */
66 lgdt boot_gdt_descr - KERNELBASE
67 ljmp $BOOT_CS,$0f
68 0:
69 xorw %ax,%ax
70 movw %ax,%ds
71 movw %ax,%es
72 movw %ax,%fs
73 movw %ax,%gs
74 movw $BOOT_DS,%ax
75 movw %ax,%ds
76 movw %ax,%es
77 movw %ax,%ss
78 movw $0x68,%ax
79 movw %ax,%gs
80
81 /* Switch to our own interrupt stack. */
82 movl $solid_intstack+INTSTACK_SIZE-4, %esp
83 andl $0xfffffff0,%esp
84
85 #ifdef APIC
86 /* Enable local apic in xAPIC mode */
87 xorl %eax, %eax
88 xorl %edx, %edx
89 movl $APIC_MSR, %ecx
90 rdmsr
91 orl $APIC_MSR_ENABLE, %eax
92 orl $APIC_MSR_BSP, %eax
93 andl $(~APIC_MSR_X2APIC), %eax
94 movl $APIC_MSR, %ecx
95 wrmsr
96 #endif
97
98 /* Reset EFLAGS to a known state. */
99 pushl $0
100 popf
101
102 /* Clear uninitialized data. */
103 lea _edata,%edi
104 lea _end,%ecx
105 subl %edi,%ecx
106 xorl %eax,%eax
107 rep
108 stosb
109
110 /* Push the boot_info pointer to be the second argument. */
111 pushl %ebx
112
113 /* Fix ifunc entries */
114 movl $__rel_iplt_start,%esi
115 movl $__rel_iplt_end,%edi
116 iplt_cont:
117 cmpl %edi,%esi
118 jae iplt_done
119 movl (%esi),%ebx /* r_offset */
120 movb 4(%esi),%al /* info */
121 cmpb $42,%al /* IRELATIVE */
122 jnz iplt_next
123 call *(%ebx) /* call ifunc */
124 movl %eax,(%ebx) /* fixed address */
125 iplt_next:
126 addl $8,%esi
127 jmp iplt_cont
128 iplt_done:
129
130 /* Jump into C code. */
131 call EXT(c_boot_entry)
132
133 .align 16
134 .word 0
135 boot_gdt_descr:
136 .word 14*8-1
137 .long boot_gdt - KERNELBASE
138 .align 16
139 boot_gdt:
140 /* 0 */
141 .quad 0
142
143 /* boot CS = 0x08 */
144 .word 0xffff
145 .word (-KERNELBASE) & 0xffff
146 .byte ((-KERNELBASE) >> 16) & 0xff
147 .byte ACC_PL_K | ACC_CODE_R | ACC_P
148 .byte ((SZ_32 | SZ_G) << 4) | 0xf
149 .byte ((-KERNELBASE) >> 24) & 0xff
150
151 /* boot DS = 0x10 */
152 .word 0xffff
153 .word (-KERNELBASE) & 0xffff
154 .byte ((-KERNELBASE) >> 16) & 0xff
155 .byte ACC_PL_K | ACC_DATA_W | ACC_P
156 .byte ((SZ_32 | SZ_G) << 4) | 0xf
157 .byte ((-KERNELBASE) >> 24) & 0xff
158
159 /* LDT = 0x18 */
160 .quad 0
161
162 /* TSS = 0x20 */
163 .quad 0
164
165 /* USER_LDT = 0x28 */
166 .quad 0
167
168 /* USER_TSS = 0x30 */
169 .quad 0
170
171 /* LINEAR = 0x38 */
172 .quad 0
173
174 /* FPREGS = 0x40 */
175 .quad 0
176
177 /* USER_GDT = 0x48 and 0x50 */
178 .quad 0
179 .quad 0
180
181 /* USER_TSS64 = 0x58 */
182 .quad 0
183
184 /* USER_TSS64 = 0x60 */
185 .quad 0
186
187 /* boot GS = 0x68 */
188 .word 0xffff
189 boot_percpu_low:
190 .word 0
191 boot_percpu_med:
192 .byte 0
193 .byte ACC_PL_K | ACC_DATA_W | ACC_P
194 .byte ((SZ_32 | SZ_G) << 4) | 0xf
195 boot_percpu_high:
196 .byte 0