| 1 |
#mach: crisv10 crisv32 |
| 2 |
#sim(crisv10): --hw-device "/rv/trace? true" |
| 3 |
#sim(crisv32): --hw-device "/rv/trace? true" |
| 4 |
#output: /rv: WD\n |
| 5 |
#output: /rv: REG R 0xd0000032\n |
| 6 |
#output: /rv: := 0xabcdef01\n |
| 7 |
#output: /rv: IRQ 0x4\n |
| 8 |
#output: /rv: REG R 0xd0000036\n |
| 9 |
#output: /rv: := 0x76543210\n |
| 10 |
#output: /rv: REG R 0xd0000030\n |
| 11 |
#output: /rv: IRQ 0x0\n |
| 12 |
#output: /rv: IRQ 0x8\n |
| 13 |
#output: /rv: := 0xeeff4455\n |
| 14 |
#output: /rv: REG R 0xd0000034\n |
| 15 |
#output: /rv: := 0xdd001122\n |
| 16 |
#output: /rv: REG R 0xd0000038\n |
| 17 |
#output: /rv: := 0xaaeeff44\n |
| 18 |
#output: /rv: REG R 0xd000003c\n |
| 19 |
#output: /rv: := 0xff445511\n |
| 20 |
#output: pass\n |
| 21 |
|
| 22 |
# Test two successive ints; that flags are disabled when an interrupt |
| 23 |
# is taken, and then automatically (or by register restore) enabled at |
| 24 |
# return. |
| 25 |
|
| 26 |
#r W, |
| 27 |
#r r,a8832,abcdef01 |
| 28 |
#r I,4 |
| 29 |
#r r,a8836,76543210 |
| 30 |
#r I,0 |
| 31 |
#r I,8 |
| 32 |
#r r,a8830,eeff4455 |
| 33 |
#r r,a8834,dd001122 |
| 34 |
#r r,a8838,aaeeff44 |
| 35 |
#r r,a883c,ff445511 |
| 36 |
|
| 37 |
.lcomm dummy,4 |
| 38 |
|
| 39 |
.include "testutils.inc" |
| 40 |
start |
| 41 |
test_h_mem 0xabcdef01 0xd0000032 |
| 42 |
moveq -1,$r4 |
| 43 |
|
| 44 |
.if ..asm.arch.cris.v32 |
| 45 |
move irqvec1,$ebp |
| 46 |
.else |
| 47 |
move irqvec1,$ibr |
| 48 |
.endif |
| 49 |
|
| 50 |
ei |
| 51 |
test_h_mem 0,dummy |
| 52 |
|
| 53 |
; Here after the first interrupt, or perhaps the second interrupt is |
| 54 |
; taken directly; leave it optional. Anyway, the second interrupt |
| 55 |
; should be taken no later than this branch. |
| 56 |
test_h_mem 0,dummy |
| 57 |
|
| 58 |
killme: |
| 59 |
fail |
| 60 |
|
| 61 |
irq0x33: |
| 62 |
.if ..asm.arch.cris.v32 |
| 63 |
; Nothing needed to save flags - "shift" should happen, and back at rfe. |
| 64 |
.else |
| 65 |
; The missing sim support for interrupt-excluding instructions is matched |
| 66 |
; by the flaw that sim doesn't service interrupts in straight code. |
| 67 |
; So, we can use a sequence that would work on actual hardware. |
| 68 |
move $dccr,$r5 |
| 69 |
di |
| 70 |
.endif |
| 71 |
|
| 72 |
test_h_mem 0x76543210 0xd0000036 |
| 73 |
test_h_mem 0xeeff4455 0xd0000030 |
| 74 |
test_h_mem 0xdd001122 0xd0000034 |
| 75 |
moveq -22,$r4 |
| 76 |
|
| 77 |
.if ..asm.arch.cris.v32 |
| 78 |
move irqvec2,$ebp |
| 79 |
rete |
| 80 |
rfe |
| 81 |
.else |
| 82 |
move irqvec2,$ibr |
| 83 |
reti |
| 84 |
move $r5,$dccr |
| 85 |
.endif |
| 86 |
|
| 87 |
pass |
| 88 |
|
| 89 |
irq0x34: |
| 90 |
test_h_mem 0xaaeeff44 0xd0000038 |
| 91 |
test_h_mem 0xff445511 0xd000003c |
| 92 |
cmpq -22,$r4 |
| 93 |
bne killme |
| 94 |
nop |
| 95 |
pass |
| 96 |
|
| 97 |
singlevec irqvec1,0x33,irq0x33 |
| 98 |
|
| 99 |
singlevec irqvec2,0x34,irq0x34 |