| 1 |
/* mips16 floating point support code |
| 2 |
Copyright (C) 1996-2025 Free Software Foundation, Inc. |
| 3 |
Contributed by Cygnus Support |
| 4 |
|
| 5 |
This file is free software; you can redistribute it and/or modify it |
| 6 |
under the terms of the GNU General Public License as published by the |
| 7 |
Free Software Foundation; either version 3, or (at your option) any |
| 8 |
later version. |
| 9 |
|
| 10 |
This file is distributed in the hope that it will be useful, but |
| 11 |
WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 13 |
General Public License for more details. |
| 14 |
|
| 15 |
Under Section 7 of GPL version 3, you are granted additional |
| 16 |
permissions described in the GCC Runtime Library Exception, version |
| 17 |
3.1, as published by the Free Software Foundation. |
| 18 |
|
| 19 |
You should have received a copy of the GNU General Public License and |
| 20 |
a copy of the GCC Runtime Library Exception along with this program; |
| 21 |
see the files COPYING3 and COPYING.RUNTIME respectively. If not, see |
| 22 |
<http://www.gnu.org/licenses/>. */ |
| 23 |
|
| 24 |
/* An executable stack is *not* required for these functions. */ |
| 25 |
#include "gnustack.h" |
| 26 |
|
| 27 |
#include "auto-host.h" |
| 28 |
|
| 29 |
#if defined(__mips_micromips) || defined(__mips_soft_float) \ |
| 30 |
|| __mips_isa_rev >= 6 |
| 31 |
/* Do nothing because this code is only needed when linking |
| 32 |
against mips16 hard-float objects. Neither micromips code |
| 33 |
nor soft-float nor MIPS R6 code can be linked against mips16 |
| 34 |
hard-float objects so we do not need these routines when |
| 35 |
building libgcc for those cases. */ |
| 36 |
#else |
| 37 |
|
| 38 |
#if defined(HAVE_AS_MODULE) |
| 39 |
#if __mips_fpr == 32 |
| 40 |
.module fp=32 |
| 41 |
#elif __mips_fpr == 0 |
| 42 |
.module fp=xx |
| 43 |
#elif __mips_fpr == 64 |
| 44 |
.module fp=64 |
| 45 |
#endif |
| 46 |
#endif |
| 47 |
|
| 48 |
/* This file contains mips16 floating point support functions. These |
| 49 |
functions are called by mips16 code to handle floating point when |
| 50 |
-msoft-float is not used. They accept the arguments and return |
| 51 |
values using the soft-float calling convention, but do the actual |
| 52 |
operation using the hard floating point instructions. */ |
| 53 |
|
| 54 |
#if defined _MIPS_SIM && (_MIPS_SIM == _ABIO32 || _MIPS_SIM == _ABIO64) |
| 55 |
|
| 56 |
/* This file contains 32-bit assembly code. */ |
| 57 |
.set nomips16 |
| 58 |
|
| 59 |
/* Start a function. */ |
| 60 |
|
| 61 |
#define STARTFN(NAME) .globl NAME; .ent NAME; NAME: |
| 62 |
|
| 63 |
/* Finish a function. */ |
| 64 |
|
| 65 |
#define ENDFN(NAME) .end NAME |
| 66 |
|
| 67 |
/* ARG1 |
| 68 |
The FPR that holds the first floating-point argument. |
| 69 |
|
| 70 |
ARG2 |
| 71 |
The FPR that holds the second floating-point argument. |
| 72 |
|
| 73 |
RET |
| 74 |
The FPR that holds a floating-point return value. */ |
| 75 |
|
| 76 |
#define RET $f0 |
| 77 |
#define ARG1 $f12 |
| 78 |
#ifdef __mips64 |
| 79 |
#define ARG2 $f13 |
| 80 |
#else |
| 81 |
#define ARG2 $f14 |
| 82 |
#endif |
| 83 |
|
| 84 |
/* Set 64-bit register GPR so that its high 32 bits contain HIGH_FPR |
| 85 |
and so that its low 32 bits contain LOW_FPR. */ |
| 86 |
#define MERGE_GPRf(GPR, HIGH_FPR, LOW_FPR) \ |
| 87 |
.set noat; \ |
| 88 |
mfc1 $1, LOW_FPR; \ |
| 89 |
mfc1 GPR, HIGH_FPR; \ |
| 90 |
dsll $1, $1, 32; \ |
| 91 |
dsll GPR, GPR, 32; \ |
| 92 |
dsrl $1, $1, 32; \ |
| 93 |
or GPR, GPR, $1; \ |
| 94 |
.set at |
| 95 |
|
| 96 |
/* Move the high 32 bits of GPR to HIGH_FPR and the low 32 bits of |
| 97 |
GPR to LOW_FPR. */ |
| 98 |
#define MERGE_GPRt(GPR, HIGH_FPR, LOW_FPR) \ |
| 99 |
.set noat; \ |
| 100 |
dsrl $1, GPR, 32; \ |
| 101 |
mtc1 GPR, LOW_FPR; \ |
| 102 |
mtc1 $1, HIGH_FPR; \ |
| 103 |
.set at |
| 104 |
|
| 105 |
/* Jump to T, and use "OPCODE, OP2" to implement a delayed move. */ |
| 106 |
#define DELAYt(T, OPCODE, OP2) \ |
| 107 |
.set noreorder; \ |
| 108 |
jr T; \ |
| 109 |
OPCODE, OP2; \ |
| 110 |
.set reorder |
| 111 |
|
| 112 |
#if __mips >= 4 |
| 113 |
/* Coprocessor moves are interlocked from the MIPS IV ISA up. */ |
| 114 |
#define DELAYf(T, OPCODE, OP2) DELAYt (T, OPCODE, OP2) |
| 115 |
#else |
| 116 |
/* Use "OPCODE. OP2" and jump to T. */ |
| 117 |
#define DELAYf(T, OPCODE, OP2) OPCODE, OP2; jr T |
| 118 |
#endif |
| 119 |
|
| 120 |
/* MOVE_SF_BYTE0(D) |
| 121 |
Move the first single-precision floating-point argument between |
| 122 |
GPRs and FPRs. |
| 123 |
|
| 124 |
MOVE_SI_BYTE0(D) |
| 125 |
Likewise the first single-precision integer argument. |
| 126 |
|
| 127 |
MOVE_SF_BYTE4(D) |
| 128 |
Move the second single-precision floating-point argument between |
| 129 |
GPRs and FPRs, given that the first argument occupies 4 bytes. |
| 130 |
|
| 131 |
MOVE_SF_BYTE8(D) |
| 132 |
Move the second single-precision floating-point argument between |
| 133 |
GPRs and FPRs, given that the first argument occupies 8 bytes. |
| 134 |
|
| 135 |
MOVE_DF_BYTE0(D) |
| 136 |
Move the first double-precision floating-point argument between |
| 137 |
GPRs and FPRs. |
| 138 |
|
| 139 |
MOVE_DF_BYTE8(D) |
| 140 |
Likewise the second double-precision floating-point argument. |
| 141 |
|
| 142 |
MOVE_SF_RET(D, T) |
| 143 |
Likewise a single-precision floating-point return value, |
| 144 |
then jump to T. |
| 145 |
|
| 146 |
MOVE_SC_RET(D, T) |
| 147 |
Likewise a complex single-precision floating-point return value. |
| 148 |
|
| 149 |
MOVE_DF_RET(D, T) |
| 150 |
Likewise a double-precision floating-point return value. |
| 151 |
|
| 152 |
MOVE_DC_RET(D, T) |
| 153 |
Likewise a complex double-precision floating-point return value. |
| 154 |
|
| 155 |
MOVE_SI_RET(D, T) |
| 156 |
Likewise a single-precision integer return value. |
| 157 |
|
| 158 |
The D argument is "t" to move to FPRs and "f" to move from FPRs. |
| 159 |
The return macros may assume that the target of the jump does not |
| 160 |
use a floating-point register. */ |
| 161 |
|
| 162 |
#define MOVE_SF_RET(D, T) DELAY##D (T, m##D##c1 $2,$f0) |
| 163 |
#define MOVE_SI_RET(D, T) DELAY##D (T, m##D##c1 $2,$f0) |
| 164 |
|
| 165 |
#if defined(__mips64) && defined(__MIPSEB__) |
| 166 |
#define MOVE_SC_RET(D, T) MERGE_GPR##D ($2, $f0, $f1); jr T |
| 167 |
#elif defined(__mips64) |
| 168 |
/* The high 32 bits of $2 correspond to the second word in memory; |
| 169 |
i.e. the imaginary part. */ |
| 170 |
#define MOVE_SC_RET(D, T) MERGE_GPR##D ($2, $f1, $f0); jr T |
| 171 |
#else |
| 172 |
#define MOVE_SC_RET(D, T) m##D##c1 $2,$f0; DELAY##D (T, m##D##c1 $3,$f2) |
| 173 |
#endif |
| 174 |
|
| 175 |
#if defined(__mips64) |
| 176 |
#define MOVE_SF_BYTE0(D) m##D##c1 $4,$f12 |
| 177 |
#define MOVE_SF_BYTE4(D) m##D##c1 $5,$f13 |
| 178 |
#define MOVE_SF_BYTE8(D) m##D##c1 $5,$f13 |
| 179 |
#else |
| 180 |
#define MOVE_SF_BYTE0(D) m##D##c1 $4,$f12 |
| 181 |
#define MOVE_SF_BYTE4(D) m##D##c1 $5,$f14 |
| 182 |
#define MOVE_SF_BYTE8(D) m##D##c1 $6,$f14 |
| 183 |
#endif |
| 184 |
#define MOVE_SI_BYTE0(D) MOVE_SF_BYTE0(D) |
| 185 |
|
| 186 |
#if defined(__mips64) |
| 187 |
#define MOVE_DF_BYTE0(D) dm##D##c1 $4,$f12 |
| 188 |
#define MOVE_DF_BYTE8(D) dm##D##c1 $5,$f13 |
| 189 |
#define MOVE_DF_RET(D, T) DELAY##D (T, dm##D##c1 $2,$f0) |
| 190 |
#define MOVE_DC_RET(D, T) dm##D##c1 $3,$f1; MOVE_DF_RET (D, T) |
| 191 |
#elif __mips_fpr != 32 && __mips_isa_rev >= 2 && defined(__MIPSEB__) |
| 192 |
#define MOVE_DF_BYTE0(D) m##D##c1 $5,$f12; m##D##hc1 $4,$f12 |
| 193 |
#define MOVE_DF_BYTE8(D) m##D##c1 $7,$f14; m##D##hc1 $6,$f14 |
| 194 |
#define MOVE_DF_RET(D, T) m##D##c1 $3,$f0; DELAY##D (T, m##D##hc1 $2,$f0) |
| 195 |
#define MOVE_DC_RET(D, T) m##D##c1 $5,$f2; m##D##hc1 $4,$f2; MOVE_DF_RET (D, T) |
| 196 |
#elif __mips_fpr != 32 && __mips_isa_rev >= 2 |
| 197 |
#define MOVE_DF_BYTE0(D) m##D##c1 $4,$f12; m##D##hc1 $5,$f12 |
| 198 |
#define MOVE_DF_BYTE8(D) m##D##c1 $6,$f14; m##D##hc1 $7,$f14 |
| 199 |
#define MOVE_DF_RET(D, T) m##D##c1 $2,$f0; DELAY##D (T, m##D##hc1 $3,$f0) |
| 200 |
#define MOVE_DC_RET(D, T) m##D##c1 $4,$f2; m##D##hc1 $5,$f2; MOVE_DF_RET (D, T) |
| 201 |
#elif __mips_fpr == 0 |
| 202 |
#define MOVE_DF_BYTE0t sw $4, 0($29); sw $5, 4($29); ldc1 $f12, 0($29) |
| 203 |
#define MOVE_DF_BYTE0f sdc1 $f12, 0($29); lw $4, 0($29); lw $5, 4($29) |
| 204 |
#define MOVE_DF_BYTE0(D) MOVE_DF_BYTE0##D |
| 205 |
#define MOVE_DF_BYTE8t sw $6, 8($29); sw $7, 12($29); ldc1 $f14, 8($29) |
| 206 |
#define MOVE_DF_BYTE8f sdc1 $f14, 8($29); lw $6, 8($29); lw $7, 12($29) |
| 207 |
#define MOVE_DF_BYTE8(D) MOVE_DF_BYTE8##D |
| 208 |
#define MOVE_DF_RETt(T) sw $2, 0($29); sw $3, 4($29); DELAYt (T, ldc1 $f0, 0($29)) |
| 209 |
#define MOVE_DF_RETf(T) sdc1 $f0, 0($29); lw $2, 0($29); DELAYf (T, lw $3, 4($29)) |
| 210 |
#define MOVE_DF_RET(D, T) MOVE_DF_RET##D(T) |
| 211 |
#define MOVE_DC_RETt(T) sw $4, 8($29); sw $5, 12($29); ldc1 $f2, 8($29); MOVE_DF_RETt(T) |
| 212 |
#define MOVE_DC_RETf(T) sdc1 $f2, 8($29); lw $4, 8($29); lw $5, 12($29); MOVE_DF_RETf(T) |
| 213 |
#define MOVE_DC_RET(D, T) MOVE_DF_RET##D(T) |
| 214 |
#elif defined(__MIPSEB__) |
| 215 |
/* FPRs are little-endian. */ |
| 216 |
#define MOVE_DF_BYTE0(D) m##D##c1 $4,$f13; m##D##c1 $5,$f12 |
| 217 |
#define MOVE_DF_BYTE8(D) m##D##c1 $6,$f15; m##D##c1 $7,$f14 |
| 218 |
#define MOVE_DF_RET(D, T) m##D##c1 $2,$f1; DELAY##D (T, m##D##c1 $3,$f0) |
| 219 |
#define MOVE_DC_RET(D, T) m##D##c1 $4,$f3; m##D##c1 $5,$f2; MOVE_DF_RET (D, T) |
| 220 |
#else |
| 221 |
#define MOVE_DF_BYTE0(D) m##D##c1 $4,$f12; m##D##c1 $5,$f13 |
| 222 |
#define MOVE_DF_BYTE8(D) m##D##c1 $6,$f14; m##D##c1 $7,$f15 |
| 223 |
#define MOVE_DF_RET(D, T) m##D##c1 $2,$f0; DELAY##D (T, m##D##c1 $3,$f1) |
| 224 |
#define MOVE_DC_RET(D, T) m##D##c1 $4,$f2; m##D##c1 $5,$f3; MOVE_DF_RET (D, T) |
| 225 |
#endif |
| 226 |
|
| 227 |
/* Single-precision math. */ |
| 228 |
|
| 229 |
/* Define a function NAME that loads two single-precision values, |
| 230 |
performs FPU operation OPCODE on them, and returns the single- |
| 231 |
precision result. */ |
| 232 |
|
| 233 |
#define OPSF3(NAME, OPCODE) \ |
| 234 |
STARTFN (NAME); \ |
| 235 |
MOVE_SF_BYTE0 (t); \ |
| 236 |
MOVE_SF_BYTE4 (t); \ |
| 237 |
OPCODE RET,ARG1,ARG2; \ |
| 238 |
MOVE_SF_RET (f, $31); \ |
| 239 |
ENDFN (NAME) |
| 240 |
|
| 241 |
#ifdef L_m16addsf3 |
| 242 |
OPSF3 (__mips16_addsf3, add.s) |
| 243 |
#endif |
| 244 |
#ifdef L_m16subsf3 |
| 245 |
OPSF3 (__mips16_subsf3, sub.s) |
| 246 |
#endif |
| 247 |
#ifdef L_m16mulsf3 |
| 248 |
OPSF3 (__mips16_mulsf3, mul.s) |
| 249 |
#endif |
| 250 |
#ifdef L_m16divsf3 |
| 251 |
OPSF3 (__mips16_divsf3, div.s) |
| 252 |
#endif |
| 253 |
|
| 254 |
/* Define a function NAME that loads a single-precision value, |
| 255 |
performs FPU operation OPCODE on it, and returns the single- |
| 256 |
precision result. */ |
| 257 |
|
| 258 |
#define OPSF2(NAME, OPCODE) \ |
| 259 |
STARTFN (NAME); \ |
| 260 |
MOVE_SF_BYTE0 (t); \ |
| 261 |
OPCODE RET,ARG1; \ |
| 262 |
MOVE_SF_RET (f, $31); \ |
| 263 |
ENDFN (NAME) |
| 264 |
|
| 265 |
#ifdef L_m16negsf2 |
| 266 |
OPSF2 (__mips16_negsf2, neg.s) |
| 267 |
#endif |
| 268 |
#ifdef L_m16abssf2 |
| 269 |
OPSF2 (__mips16_abssf2, abs.s) |
| 270 |
#endif |
| 271 |
|
| 272 |
/* Single-precision comparisons. */ |
| 273 |
|
| 274 |
/* Define a function NAME that loads two single-precision values, |
| 275 |
performs floating point comparison OPCODE, and returns TRUE or |
| 276 |
FALSE depending on the result. */ |
| 277 |
|
| 278 |
#define CMPSF(NAME, OPCODE, TRUE, FALSE) \ |
| 279 |
STARTFN (NAME); \ |
| 280 |
MOVE_SF_BYTE0 (t); \ |
| 281 |
MOVE_SF_BYTE4 (t); \ |
| 282 |
OPCODE ARG1,ARG2; \ |
| 283 |
li $2,TRUE; \ |
| 284 |
bc1t 1f; \ |
| 285 |
li $2,FALSE; \ |
| 286 |
1:; \ |
| 287 |
j $31; \ |
| 288 |
ENDFN (NAME) |
| 289 |
|
| 290 |
/* Like CMPSF, but reverse the comparison operands. */ |
| 291 |
|
| 292 |
#define REVCMPSF(NAME, OPCODE, TRUE, FALSE) \ |
| 293 |
STARTFN (NAME); \ |
| 294 |
MOVE_SF_BYTE0 (t); \ |
| 295 |
MOVE_SF_BYTE4 (t); \ |
| 296 |
OPCODE ARG2,ARG1; \ |
| 297 |
li $2,TRUE; \ |
| 298 |
bc1t 1f; \ |
| 299 |
li $2,FALSE; \ |
| 300 |
1:; \ |
| 301 |
j $31; \ |
| 302 |
ENDFN (NAME) |
| 303 |
|
| 304 |
#ifdef L_m16eqsf2 |
| 305 |
CMPSF (__mips16_eqsf2, c.eq.s, 0, 1) |
| 306 |
#endif |
| 307 |
#ifdef L_m16nesf2 |
| 308 |
CMPSF (__mips16_nesf2, c.eq.s, 0, 1) |
| 309 |
#endif |
| 310 |
#ifdef L_m16gtsf2 |
| 311 |
REVCMPSF (__mips16_gtsf2, c.lt.s, 1, 0) |
| 312 |
#endif |
| 313 |
#ifdef L_m16gesf2 |
| 314 |
REVCMPSF (__mips16_gesf2, c.le.s, 0, -1) |
| 315 |
#endif |
| 316 |
#ifdef L_m16lesf2 |
| 317 |
CMPSF (__mips16_lesf2, c.le.s, 0, 1) |
| 318 |
#endif |
| 319 |
#ifdef L_m16ltsf2 |
| 320 |
CMPSF (__mips16_ltsf2, c.lt.s, -1, 0) |
| 321 |
#endif |
| 322 |
#ifdef L_m16unordsf2 |
| 323 |
CMPSF(__mips16_unordsf2, c.un.s, 1, 0) |
| 324 |
#endif |
| 325 |
|
| 326 |
|
| 327 |
/* Single-precision conversions. */ |
| 328 |
|
| 329 |
#ifdef L_m16fltsisf |
| 330 |
STARTFN (__mips16_floatsisf) |
| 331 |
MOVE_SF_BYTE0 (t) |
| 332 |
cvt.s.w RET,ARG1 |
| 333 |
MOVE_SF_RET (f, $31) |
| 334 |
ENDFN (__mips16_floatsisf) |
| 335 |
#endif |
| 336 |
|
| 337 |
#ifdef L_m16fltunsisf |
| 338 |
STARTFN (__mips16_floatunsisf) |
| 339 |
.set noreorder |
| 340 |
bltz $4,1f |
| 341 |
MOVE_SF_BYTE0 (t) |
| 342 |
.set reorder |
| 343 |
cvt.s.w RET,ARG1 |
| 344 |
MOVE_SF_RET (f, $31) |
| 345 |
1: |
| 346 |
and $2,$4,1 |
| 347 |
srl $3,$4,1 |
| 348 |
or $2,$2,$3 |
| 349 |
mtc1 $2,RET |
| 350 |
cvt.s.w RET,RET |
| 351 |
add.s RET,RET,RET |
| 352 |
MOVE_SF_RET (f, $31) |
| 353 |
ENDFN (__mips16_floatunsisf) |
| 354 |
#endif |
| 355 |
|
| 356 |
#ifdef L_m16fix_truncsfsi |
| 357 |
STARTFN (__mips16_fix_truncsfsi) |
| 358 |
MOVE_SF_BYTE0 (t) |
| 359 |
trunc.w.s RET,ARG1,$4 |
| 360 |
MOVE_SI_RET (f, $31) |
| 361 |
ENDFN (__mips16_fix_truncsfsi) |
| 362 |
#endif |
| 363 |
|
| 364 |
#if !defined(__mips_single_float) && !defined(__SINGLE_FLOAT) |
| 365 |
|
| 366 |
/* Double-precision math. */ |
| 367 |
|
| 368 |
/* Define a function NAME that loads two double-precision values, |
| 369 |
performs FPU operation OPCODE on them, and returns the double- |
| 370 |
precision result. */ |
| 371 |
|
| 372 |
#define OPDF3(NAME, OPCODE) \ |
| 373 |
STARTFN (NAME); \ |
| 374 |
MOVE_DF_BYTE0 (t); \ |
| 375 |
MOVE_DF_BYTE8 (t); \ |
| 376 |
OPCODE RET,ARG1,ARG2; \ |
| 377 |
MOVE_DF_RET (f, $31); \ |
| 378 |
ENDFN (NAME) |
| 379 |
|
| 380 |
#ifdef L_m16adddf3 |
| 381 |
OPDF3 (__mips16_adddf3, add.d) |
| 382 |
#endif |
| 383 |
#ifdef L_m16subdf3 |
| 384 |
OPDF3 (__mips16_subdf3, sub.d) |
| 385 |
#endif |
| 386 |
#ifdef L_m16muldf3 |
| 387 |
OPDF3 (__mips16_muldf3, mul.d) |
| 388 |
#endif |
| 389 |
#ifdef L_m16divdf3 |
| 390 |
OPDF3 (__mips16_divdf3, div.d) |
| 391 |
#endif |
| 392 |
|
| 393 |
/* Define a function NAME that loads a double-precision value, |
| 394 |
performs FPU operation OPCODE on it, and returns the double- |
| 395 |
precision result. */ |
| 396 |
|
| 397 |
#define OPDF2(NAME, OPCODE) \ |
| 398 |
STARTFN (NAME); \ |
| 399 |
MOVE_DF_BYTE0 (t); \ |
| 400 |
OPCODE RET,ARG1; \ |
| 401 |
MOVE_DF_RET (f, $31); \ |
| 402 |
ENDFN (NAME) |
| 403 |
|
| 404 |
#ifdef L_m16negdf2 |
| 405 |
OPDF2 (__mips16_negdf2, neg.d) |
| 406 |
#endif |
| 407 |
#ifdef L_m16absdf2 |
| 408 |
OPDF2 (__mips16_absdf2, abs.d) |
| 409 |
#endif |
| 410 |
|
| 411 |
/* Conversions between single and double precision. */ |
| 412 |
|
| 413 |
#ifdef L_m16extsfdf2 |
| 414 |
STARTFN (__mips16_extendsfdf2) |
| 415 |
MOVE_SF_BYTE0 (t) |
| 416 |
cvt.d.s RET,ARG1 |
| 417 |
MOVE_DF_RET (f, $31) |
| 418 |
ENDFN (__mips16_extendsfdf2) |
| 419 |
#endif |
| 420 |
|
| 421 |
#ifdef L_m16trdfsf2 |
| 422 |
STARTFN (__mips16_truncdfsf2) |
| 423 |
MOVE_DF_BYTE0 (t) |
| 424 |
cvt.s.d RET,ARG1 |
| 425 |
MOVE_SF_RET (f, $31) |
| 426 |
ENDFN (__mips16_truncdfsf2) |
| 427 |
#endif |
| 428 |
|
| 429 |
/* Double-precision comparisons. */ |
| 430 |
|
| 431 |
/* Define a function NAME that loads two double-precision values, |
| 432 |
performs floating point comparison OPCODE, and returns TRUE or |
| 433 |
FALSE depending on the result. */ |
| 434 |
|
| 435 |
#define CMPDF(NAME, OPCODE, TRUE, FALSE) \ |
| 436 |
STARTFN (NAME); \ |
| 437 |
MOVE_DF_BYTE0 (t); \ |
| 438 |
MOVE_DF_BYTE8 (t); \ |
| 439 |
OPCODE ARG1,ARG2; \ |
| 440 |
li $2,TRUE; \ |
| 441 |
bc1t 1f; \ |
| 442 |
li $2,FALSE; \ |
| 443 |
1:; \ |
| 444 |
j $31; \ |
| 445 |
ENDFN (NAME) |
| 446 |
|
| 447 |
/* Like CMPDF, but reverse the comparison operands. */ |
| 448 |
|
| 449 |
#define REVCMPDF(NAME, OPCODE, TRUE, FALSE) \ |
| 450 |
STARTFN (NAME); \ |
| 451 |
MOVE_DF_BYTE0 (t); \ |
| 452 |
MOVE_DF_BYTE8 (t); \ |
| 453 |
OPCODE ARG2,ARG1; \ |
| 454 |
li $2,TRUE; \ |
| 455 |
bc1t 1f; \ |
| 456 |
li $2,FALSE; \ |
| 457 |
1:; \ |
| 458 |
j $31; \ |
| 459 |
ENDFN (NAME) |
| 460 |
|
| 461 |
#ifdef L_m16eqdf2 |
| 462 |
CMPDF (__mips16_eqdf2, c.eq.d, 0, 1) |
| 463 |
#endif |
| 464 |
#ifdef L_m16nedf2 |
| 465 |
CMPDF (__mips16_nedf2, c.eq.d, 0, 1) |
| 466 |
#endif |
| 467 |
#ifdef L_m16gtdf2 |
| 468 |
REVCMPDF (__mips16_gtdf2, c.lt.d, 1, 0) |
| 469 |
#endif |
| 470 |
#ifdef L_m16gedf2 |
| 471 |
REVCMPDF (__mips16_gedf2, c.le.d, 0, -1) |
| 472 |
#endif |
| 473 |
#ifdef L_m16ledf2 |
| 474 |
CMPDF (__mips16_ledf2, c.le.d, 0, 1) |
| 475 |
#endif |
| 476 |
#ifdef L_m16ltdf2 |
| 477 |
CMPDF (__mips16_ltdf2, c.lt.d, -1, 0) |
| 478 |
#endif |
| 479 |
#ifdef L_m16unorddf2 |
| 480 |
CMPDF(__mips16_unorddf2, c.un.d, 1, 0) |
| 481 |
#endif |
| 482 |
|
| 483 |
/* Double-precision conversions. */ |
| 484 |
|
| 485 |
#ifdef L_m16fltsidf |
| 486 |
STARTFN (__mips16_floatsidf) |
| 487 |
MOVE_SI_BYTE0 (t) |
| 488 |
cvt.d.w RET,ARG1 |
| 489 |
MOVE_DF_RET (f, $31) |
| 490 |
ENDFN (__mips16_floatsidf) |
| 491 |
#endif |
| 492 |
|
| 493 |
#ifdef L_m16fltunsidf |
| 494 |
STARTFN (__mips16_floatunsidf) |
| 495 |
MOVE_SI_BYTE0 (t) |
| 496 |
cvt.d.w RET,ARG1 |
| 497 |
bgez $4,1f |
| 498 |
li.d ARG1, 4.294967296e+9 |
| 499 |
add.d RET, RET, ARG1 |
| 500 |
1: MOVE_DF_RET (f, $31) |
| 501 |
ENDFN (__mips16_floatunsidf) |
| 502 |
#endif |
| 503 |
|
| 504 |
#ifdef L_m16fix_truncdfsi |
| 505 |
STARTFN (__mips16_fix_truncdfsi) |
| 506 |
MOVE_DF_BYTE0 (t) |
| 507 |
trunc.w.d RET,ARG1,$4 |
| 508 |
MOVE_SI_RET (f, $31) |
| 509 |
ENDFN (__mips16_fix_truncdfsi) |
| 510 |
#endif |
| 511 |
#endif /* !__mips_single_float */ |
| 512 |
|
| 513 |
/* We don't export stubs from libgcc_s.so and always require static |
| 514 |
versions to be pulled from libgcc.a as needed because they use $2 |
| 515 |
and possibly $3 as arguments, diverging from the standard SysV ABI, |
| 516 |
and as such would require severe pessimisation of MIPS16 PLT entries |
| 517 |
just for this single special case. |
| 518 |
|
| 519 |
For compatibility with old binaries that used safe standard MIPS PLT |
| 520 |
entries and referred to these functions we still export them at |
| 521 |
version GCC_4.4.0 for run-time loading only. */ |
| 522 |
|
| 523 |
#ifdef SHARED |
| 524 |
#define CE_STARTFN(NAME) \ |
| 525 |
STARTFN (NAME##_compat); \ |
| 526 |
.symver NAME##_compat, NAME@GCC_4.4.0 |
| 527 |
#define CE_ENDFN(NAME) ENDFN (NAME##_compat) |
| 528 |
#else |
| 529 |
#define CE_STARTFN(NAME) \ |
| 530 |
STARTFN (NAME); \ |
| 531 |
.hidden NAME |
| 532 |
#define CE_ENDFN(NAME) ENDFN (NAME) |
| 533 |
#endif |
| 534 |
|
| 535 |
/* Define a function NAME that moves a return value of mode MODE from |
| 536 |
FPRs to GPRs. */ |
| 537 |
|
| 538 |
#define RET_FUNCTION(NAME, MODE) \ |
| 539 |
CE_STARTFN (NAME); \ |
| 540 |
MOVE_##MODE##_RET (t, $31); \ |
| 541 |
CE_ENDFN (NAME) |
| 542 |
|
| 543 |
#ifdef L_m16retsf |
| 544 |
RET_FUNCTION (__mips16_ret_sf, SF) |
| 545 |
#endif |
| 546 |
|
| 547 |
#ifdef L_m16retsc |
| 548 |
RET_FUNCTION (__mips16_ret_sc, SC) |
| 549 |
#endif |
| 550 |
|
| 551 |
#if !defined(__mips_single_float) && !defined(__SINGLE_FLOAT) |
| 552 |
#ifdef L_m16retdf |
| 553 |
RET_FUNCTION (__mips16_ret_df, DF) |
| 554 |
#endif |
| 555 |
|
| 556 |
#ifdef L_m16retdc |
| 557 |
RET_FUNCTION (__mips16_ret_dc, DC) |
| 558 |
#endif |
| 559 |
#endif /* !__mips_single_float */ |
| 560 |
|
| 561 |
/* STUB_ARGS_X copies the arguments from GPRs to FPRs for argument |
| 562 |
code X. X is calculated as ARG1 + ARG2 * 4, where ARG1 and ARG2 |
| 563 |
classify the first and second arguments as follows: |
| 564 |
|
| 565 |
1: a single-precision argument |
| 566 |
2: a double-precision argument |
| 567 |
0: no argument, or not one of the above. */ |
| 568 |
|
| 569 |
#define STUB_ARGS_0 /* () */ |
| 570 |
#define STUB_ARGS_1 MOVE_SF_BYTE0 (t) /* (sf) */ |
| 571 |
#define STUB_ARGS_5 MOVE_SF_BYTE0 (t); MOVE_SF_BYTE4 (t) /* (sf, sf) */ |
| 572 |
#define STUB_ARGS_9 MOVE_SF_BYTE0 (t); MOVE_DF_BYTE8 (t) /* (sf, df) */ |
| 573 |
#define STUB_ARGS_2 MOVE_DF_BYTE0 (t) /* (df) */ |
| 574 |
#define STUB_ARGS_6 MOVE_DF_BYTE0 (t); MOVE_SF_BYTE8 (t) /* (df, sf) */ |
| 575 |
#define STUB_ARGS_10 MOVE_DF_BYTE0 (t); MOVE_DF_BYTE8 (t) /* (df, df) */ |
| 576 |
|
| 577 |
/* These functions are used by 16-bit code when calling via a function |
| 578 |
pointer. They must copy the floating point arguments from the GPRs |
| 579 |
to FPRs and then call function $2. */ |
| 580 |
|
| 581 |
#define CALL_STUB_NO_RET(NAME, CODE) \ |
| 582 |
CE_STARTFN (NAME); \ |
| 583 |
STUB_ARGS_##CODE; \ |
| 584 |
.set noreorder; \ |
| 585 |
jr $2; \ |
| 586 |
move $25,$2; \ |
| 587 |
.set reorder; \ |
| 588 |
CE_ENDFN (NAME) |
| 589 |
|
| 590 |
#ifdef L_m16stub1 |
| 591 |
CALL_STUB_NO_RET (__mips16_call_stub_1, 1) |
| 592 |
#endif |
| 593 |
|
| 594 |
#ifdef L_m16stub5 |
| 595 |
CALL_STUB_NO_RET (__mips16_call_stub_5, 5) |
| 596 |
#endif |
| 597 |
|
| 598 |
#if !defined(__mips_single_float) && !defined(__SINGLE_FLOAT) |
| 599 |
|
| 600 |
#ifdef L_m16stub2 |
| 601 |
CALL_STUB_NO_RET (__mips16_call_stub_2, 2) |
| 602 |
#endif |
| 603 |
|
| 604 |
#ifdef L_m16stub6 |
| 605 |
CALL_STUB_NO_RET (__mips16_call_stub_6, 6) |
| 606 |
#endif |
| 607 |
|
| 608 |
#ifdef L_m16stub9 |
| 609 |
CALL_STUB_NO_RET (__mips16_call_stub_9, 9) |
| 610 |
#endif |
| 611 |
|
| 612 |
#ifdef L_m16stub10 |
| 613 |
CALL_STUB_NO_RET (__mips16_call_stub_10, 10) |
| 614 |
#endif |
| 615 |
#endif /* !__mips_single_float */ |
| 616 |
|
| 617 |
/* Now we have the same set of functions, except that this time the |
| 618 |
function being called returns an SFmode, SCmode, DFmode or DCmode |
| 619 |
value; we need to instantiate a set for each case. The calling |
| 620 |
function will arrange to preserve $18, so these functions are free |
| 621 |
to use it to hold the return address. |
| 622 |
|
| 623 |
Note that we do not know whether the function we are calling is 16 |
| 624 |
bit or 32 bit. However, it does not matter, because 16-bit |
| 625 |
functions always return floating point values in both the gp and |
| 626 |
the fp regs. It would be possible to check whether the function |
| 627 |
being called is 16 bits, in which case the copy is unnecessary; |
| 628 |
however, it's faster to always do the copy. */ |
| 629 |
|
| 630 |
#define CALL_STUB_RET(NAME, CODE, MODE) \ |
| 631 |
CE_STARTFN (NAME); \ |
| 632 |
.cfi_startproc; \ |
| 633 |
/* Create a fake CFA 4 bytes below the stack pointer. */ \ |
| 634 |
.cfi_def_cfa 29,-4; \ |
| 635 |
/* "Save" $sp in itself so we don't use the fake CFA. \ |
| 636 |
This is: DW_CFA_val_expression r29, { DW_OP_reg29 }. */ \ |
| 637 |
.cfi_escape 0x16,29,1,0x6d; \ |
| 638 |
move $18,$31; \ |
| 639 |
.cfi_register 31,18; \ |
| 640 |
STUB_ARGS_##CODE; \ |
| 641 |
.set noreorder; \ |
| 642 |
jalr $2; \ |
| 643 |
move $25,$2; \ |
| 644 |
.set reorder; \ |
| 645 |
MOVE_##MODE##_RET (f, $18); \ |
| 646 |
.cfi_endproc; \ |
| 647 |
CE_ENDFN (NAME) |
| 648 |
|
| 649 |
/* First, instantiate the single-float set. */ |
| 650 |
|
| 651 |
#ifdef L_m16stubsf0 |
| 652 |
CALL_STUB_RET (__mips16_call_stub_sf_0, 0, SF) |
| 653 |
#endif |
| 654 |
|
| 655 |
#ifdef L_m16stubsf1 |
| 656 |
CALL_STUB_RET (__mips16_call_stub_sf_1, 1, SF) |
| 657 |
#endif |
| 658 |
|
| 659 |
#ifdef L_m16stubsf5 |
| 660 |
CALL_STUB_RET (__mips16_call_stub_sf_5, 5, SF) |
| 661 |
#endif |
| 662 |
|
| 663 |
#if !defined(__mips_single_float) && !defined(__SINGLE_FLOAT) |
| 664 |
#ifdef L_m16stubsf2 |
| 665 |
CALL_STUB_RET (__mips16_call_stub_sf_2, 2, SF) |
| 666 |
#endif |
| 667 |
|
| 668 |
#ifdef L_m16stubsf6 |
| 669 |
CALL_STUB_RET (__mips16_call_stub_sf_6, 6, SF) |
| 670 |
#endif |
| 671 |
|
| 672 |
#ifdef L_m16stubsf9 |
| 673 |
CALL_STUB_RET (__mips16_call_stub_sf_9, 9, SF) |
| 674 |
#endif |
| 675 |
|
| 676 |
#ifdef L_m16stubsf10 |
| 677 |
CALL_STUB_RET (__mips16_call_stub_sf_10, 10, SF) |
| 678 |
#endif |
| 679 |
#endif /* !__mips_single_float */ |
| 680 |
|
| 681 |
|
| 682 |
/* Now we have the same set of functions again, except that this time |
| 683 |
the function being called returns an DFmode value. */ |
| 684 |
|
| 685 |
#if !defined(__mips_single_float) && !defined(__SINGLE_FLOAT) |
| 686 |
#ifdef L_m16stubdf0 |
| 687 |
CALL_STUB_RET (__mips16_call_stub_df_0, 0, DF) |
| 688 |
#endif |
| 689 |
|
| 690 |
#ifdef L_m16stubdf1 |
| 691 |
CALL_STUB_RET (__mips16_call_stub_df_1, 1, DF) |
| 692 |
#endif |
| 693 |
|
| 694 |
#ifdef L_m16stubdf5 |
| 695 |
CALL_STUB_RET (__mips16_call_stub_df_5, 5, DF) |
| 696 |
#endif |
| 697 |
|
| 698 |
#ifdef L_m16stubdf2 |
| 699 |
CALL_STUB_RET (__mips16_call_stub_df_2, 2, DF) |
| 700 |
#endif |
| 701 |
|
| 702 |
#ifdef L_m16stubdf6 |
| 703 |
CALL_STUB_RET (__mips16_call_stub_df_6, 6, DF) |
| 704 |
#endif |
| 705 |
|
| 706 |
#ifdef L_m16stubdf9 |
| 707 |
CALL_STUB_RET (__mips16_call_stub_df_9, 9, DF) |
| 708 |
#endif |
| 709 |
|
| 710 |
#ifdef L_m16stubdf10 |
| 711 |
CALL_STUB_RET (__mips16_call_stub_df_10, 10, DF) |
| 712 |
#endif |
| 713 |
#endif /* !__mips_single_float */ |
| 714 |
|
| 715 |
|
| 716 |
/* Ho hum. Here we have the same set of functions again, this time |
| 717 |
for when the function being called returns an SCmode value. */ |
| 718 |
|
| 719 |
#ifdef L_m16stubsc0 |
| 720 |
CALL_STUB_RET (__mips16_call_stub_sc_0, 0, SC) |
| 721 |
#endif |
| 722 |
|
| 723 |
#ifdef L_m16stubsc1 |
| 724 |
CALL_STUB_RET (__mips16_call_stub_sc_1, 1, SC) |
| 725 |
#endif |
| 726 |
|
| 727 |
#ifdef L_m16stubsc5 |
| 728 |
CALL_STUB_RET (__mips16_call_stub_sc_5, 5, SC) |
| 729 |
#endif |
| 730 |
|
| 731 |
#if !defined(__mips_single_float) && !defined(__SINGLE_FLOAT) |
| 732 |
#ifdef L_m16stubsc2 |
| 733 |
CALL_STUB_RET (__mips16_call_stub_sc_2, 2, SC) |
| 734 |
#endif |
| 735 |
|
| 736 |
#ifdef L_m16stubsc6 |
| 737 |
CALL_STUB_RET (__mips16_call_stub_sc_6, 6, SC) |
| 738 |
#endif |
| 739 |
|
| 740 |
#ifdef L_m16stubsc9 |
| 741 |
CALL_STUB_RET (__mips16_call_stub_sc_9, 9, SC) |
| 742 |
#endif |
| 743 |
|
| 744 |
#ifdef L_m16stubsc10 |
| 745 |
CALL_STUB_RET (__mips16_call_stub_sc_10, 10, SC) |
| 746 |
#endif |
| 747 |
#endif /* !__mips_single_float */ |
| 748 |
|
| 749 |
|
| 750 |
/* Finally, another set of functions for DCmode. */ |
| 751 |
|
| 752 |
#if !defined(__mips_single_float) && !defined(__SINGLE_FLOAT) |
| 753 |
#ifdef L_m16stubdc0 |
| 754 |
CALL_STUB_RET (__mips16_call_stub_dc_0, 0, DC) |
| 755 |
#endif |
| 756 |
|
| 757 |
#ifdef L_m16stubdc1 |
| 758 |
CALL_STUB_RET (__mips16_call_stub_dc_1, 1, DC) |
| 759 |
#endif |
| 760 |
|
| 761 |
#ifdef L_m16stubdc5 |
| 762 |
CALL_STUB_RET (__mips16_call_stub_dc_5, 5, DC) |
| 763 |
#endif |
| 764 |
|
| 765 |
#ifdef L_m16stubdc2 |
| 766 |
CALL_STUB_RET (__mips16_call_stub_dc_2, 2, DC) |
| 767 |
#endif |
| 768 |
|
| 769 |
#ifdef L_m16stubdc6 |
| 770 |
CALL_STUB_RET (__mips16_call_stub_dc_6, 6, DC) |
| 771 |
#endif |
| 772 |
|
| 773 |
#ifdef L_m16stubdc9 |
| 774 |
CALL_STUB_RET (__mips16_call_stub_dc_9, 9, DC) |
| 775 |
#endif |
| 776 |
|
| 777 |
#ifdef L_m16stubdc10 |
| 778 |
CALL_STUB_RET (__mips16_call_stub_dc_10, 10, DC) |
| 779 |
#endif |
| 780 |
#endif /* !__mips_single_float */ |
| 781 |
|
| 782 |
#endif |
| 783 |
#endif /* defined(__mips_micromips) || defined(__mips_soft_float) */ |