Debian Codegraph @

gcc/testsuite/ada/acats/tests/cxf/cxf2003.a

raw
1 -- CXF2003.A
2 --
3 -- Grant of Unlimited Rights
4 --
5 -- Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687,
6 -- F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained
7 -- unlimited rights in the software and documentation contained herein.
8 -- Unlimited rights are defined in DFAR 252.227-7013(a)(19). By making
9 -- this public release, the Government intends to confer upon all
10 -- recipients unlimited rights equal to those held by the Government.
11 -- These rights include rights to use, duplicate, release or disclose the
12 -- released technical data and computer software in whole or in part, in
13 -- any manner and for any purpose whatsoever, and to have or permit others
14 -- to do so.
15 --
16 -- DISCLAIMER
17 --
18 -- ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR
19 -- DISCLOSED ARE AS IS. THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED
20 -- WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE
21 -- SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE
22 -- OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A
23 -- PARTICULAR PURPOSE OF SAID MATERIAL.
24 --*
25 --
26 -- OBJECTIVE:
27 -- Check that the multiplying operators for a decimal fixed point type
28 -- return values that are integral multiples of the small of the type.
29 -- Check the case where the two operands are of different decimal
30 -- fixed point types.
31 --
32 -- Check that if the mathematical result is between multiples of the
33 -- small of the result type, the result is truncated toward zero.
34 -- Check that if the attribute 'Round is applied to the mathematical
35 -- result, however, the result is rounded to the nearest multiple of
36 -- the small (away from zero if the result is midway between two
37 -- multiples of the small).
38 --
39 -- TEST DESCRIPTION:
40 -- Two decimal fixed point types A and B are declared, one with a
41 -- Machine_Radix value of 2, and one with a value of 10. A third decimal
42 -- fixed point type C is declared with digits and delta values different
43 -- from those of A and B. For type A (and B), checks are performed
44 -- on the following operations, where one operand type is C, and the
45 -- other operand type and the result type is A (or B):
46 --
47 -- - Multiplication.
48 -- - Multiplication, where the attribute 'Round is applied to the
49 -- result.
50 -- - Division.
51 -- - Division, where the attribute 'Round is applied to the result.
52 --
53 -- Each operation is performed within a loop, where one operand is
54 -- always the same variable. After the loop completes, the cumulative
55 -- total contained in this variable is compared with the expected
56 -- result.
57 --
58 -- APPLICABILITY CRITERIA:
59 -- This test is only applicable for a compiler attempting validation
60 -- for the Information Systems Annex.
61 --
62 --
63 -- CHANGE HISTORY:
64 -- 22 Mar 96 SAIC Prerelease version for ACVC 2.1.
65 --
66 --!
67
68 generic
69 type Decimal_Fixed_1 is delta <> digits <>;
70 type Decimal_Fixed_2 is delta <> digits <>;
71 package CXF2003_0 is
72
73 procedure Multiply_And_Truncate (Balance : in out Decimal_Fixed_1;
74 Factor : in Decimal_Fixed_2);
75
76 procedure Divide_And_Truncate (Balance : in out Decimal_Fixed_1;
77 Divisor : in Decimal_Fixed_2);
78
79 procedure Multiply_And_Round (Balance : in out Decimal_Fixed_1;
80 Factor : in Decimal_Fixed_2);
81
82 procedure Divide_And_Round (Balance : in out Decimal_Fixed_1;
83 Divisor : in Decimal_Fixed_2);
84
85 end CXF2003_0;
86
87
88 --==================================================================--
89
90
91 package body CXF2003_0 is
92
93 procedure Multiply_And_Truncate (Balance : in out Decimal_Fixed_1;
94 Factor : in Decimal_Fixed_2) is
95 Interest : Decimal_Fixed_1;
96 begin
97 Interest := Factor * Balance; -- Fixed-fixed multiplication.
98 Balance := Balance + Interest;
99 end Multiply_And_Truncate;
100
101
102 procedure Divide_And_Truncate (Balance : in out Decimal_Fixed_1;
103 Divisor : in Decimal_Fixed_2) is
104 Interest : Decimal_Fixed_1;
105 begin
106 Interest := Balance / Divisor; -- Fixed-fixed division.
107 Balance := Balance + Interest;
108 end Divide_And_Truncate;
109
110
111 procedure Multiply_And_Round (Balance : in out Decimal_Fixed_1;
112 Factor : in Decimal_Fixed_2) is
113 Interest : Decimal_Fixed_1;
114 begin
115 -- Fixed-fixed multiplication.
116 Interest := Decimal_Fixed_1'Round ( Factor * Balance );
117 Balance := Balance + Interest;
118 end Multiply_And_Round;
119
120
121 procedure Divide_And_Round (Balance : in out Decimal_Fixed_1;
122 Divisor : in Decimal_Fixed_2) is
123 Interest : Decimal_Fixed_1;
124 begin
125 -- Fixed-fixed division.
126 Interest := Decimal_Fixed_1'Round ( Balance / Divisor );
127 Balance := Balance + Interest;
128 end Divide_And_Round;
129
130 end CXF2003_0;
131
132
133 --==================================================================--
134
135
136 package CXF2003_1 is
137
138 type Money_Radix2 is delta 0.01 digits 11; -- range -999,999,999.99 ..
139 for Money_Radix2'Machine_Radix use 2; -- +999,999,999.99
140
141
142 type Money_Radix10 is delta 0.01 digits 11; -- range -999,999,999.99 ..
143 for Money_Radix10'Machine_Radix use 10; -- +999,999,999.99
144
145
146 type Interest_Rate is delta 0.00001 digits 9; -- range -9999.99999 ..
147 -- +9999.99999
148
149 end CXF2003_1;
150
151
152 --==================================================================--
153
154
155 with CXF2003_0;
156 with CXF2003_1;
157
158 with Report;
159 procedure CXF2003 is
160
161 Loop_Count : constant := 1825;
162 type Loop_Range is range 1 .. Loop_Count;
163
164 begin
165
166 Report.Test ("CXF2003", "Check decimal multiplication and division, and " &
167 "'Round, where the operand types are different");
168
169
170 ---=---=---=---=---=---=---=---=---=---=---
171
172
173 RADIX_2_SUBTESTS:
174 declare
175 package Radix_2 is new CXF2003_0 (CXF2003_1.Money_Radix2,
176 CXF2003_1.Interest_Rate);
177 use type CXF2003_1.Money_Radix2;
178 use type CXF2003_1.Interest_Rate;
179 begin
180
181 RADIX_2_MULTIPLICATION:
182 declare
183 Rate : CXF2003_1.Interest_Rate := 0.198;
184 Period : Integer := 365;
185 Factor : CXF2003_1.Interest_Rate := Rate / Period;
186
187 Initial : constant CXF2003_1.Money_Radix2 := 1_000.00;
188 Trunc_Expected : constant CXF2003_1.Money_Radix2 := 2_662.94;
189 Round_Expected : constant CXF2003_1.Money_Radix2 := 2_678.34;
190
191 Balance : CXF2003_1.Money_Radix2;
192 begin
193 ---=---=---=---=---=---=---
194
195 Balance := Initial;
196
197 for I in Loop_Range loop
198 Radix_2.Multiply_And_Truncate (Balance, Factor);
199 end loop;
200
201 if Balance /= Trunc_Expected then
202 Report.Failed ("Wrong result: Radix 2 multiply and truncate");
203 end if;
204
205 ---=---=---=---=---=---=---
206
207 Balance := Initial;
208
209 for I in Loop_Range loop
210 Radix_2.Multiply_And_Round (Balance, Factor);
211 end loop;
212
213 if Balance /= Round_Expected then
214 Report.Failed ("Wrong result: Radix 2 multiply and round");
215 end if;
216
217 ---=---=---=---=---=---=---
218 end RADIX_2_MULTIPLICATION;
219
220
221 RADIX_2_DIVISION:
222 declare
223 Rate : CXF2003_1.Interest_Rate := 0.129;
224 Period : Integer := 365;
225 Factor : CXF2003_1.Interest_Rate := Rate / Period;
226 Divisor : CXF2003_1.Interest_Rate := 1.0 / Factor;
227
228 Initial : constant CXF2003_1.Money_Radix2 := 14_626.52;
229 Trunc_Expected : constant CXF2003_1.Money_Radix2 := 27_688.26;
230 Round_Expected : constant CXF2003_1.Money_Radix2 := 27_701.12;
231
232 Balance : CXF2003_1.Money_Radix2;
233 begin
234 ---=---=---=---=---=---=---
235
236 Balance := Initial;
237
238 for I in Loop_Range loop
239 Radix_2.Divide_And_Truncate (Balance, Divisor);
240 end loop;
241
242 if Balance /= Trunc_Expected then
243 Report.Failed ("Wrong result: Radix 2 divide and truncate");
244 end if;
245
246 ---=---=---=---=---=---=---
247
248 Balance := Initial;
249
250 for I in Loop_Range loop
251 Radix_2.Divide_And_Round (Balance, Divisor);
252 end loop;
253
254 if Balance /= Round_Expected then
255 Report.Failed ("Wrong result: Radix 2 divide and round");
256 end if;
257
258 ---=---=---=---=---=---=---
259 end RADIX_2_DIVISION;
260
261 end RADIX_2_SUBTESTS;
262
263
264 ---=---=---=---=---=---=---=---=---=---=---
265
266
267 RADIX_10_SUBTESTS:
268 declare
269 package Radix_10 is new CXF2003_0 (CXF2003_1.Money_Radix10,
270 CXF2003_1.Interest_Rate);
271 use type CXF2003_1.Money_Radix10;
272 use type CXF2003_1.Interest_Rate;
273 begin
274
275 RADIX_10_MULTIPLICATION:
276 declare
277 Rate : CXF2003_1.Interest_Rate := 0.063;
278 Period : Integer := 365;
279 Factor : CXF2003_1.Interest_Rate := Rate / Period;
280
281 Initial : constant CXF2003_1.Money_Radix10 := 314_036.10;
282 Trunc_Expected : constant CXF2003_1.Money_Radix10 := 428_249.48;
283 Round_Expected : constant CXF2003_1.Money_Radix10 := 428_260.52;
284
285 Balance : CXF2003_1.Money_Radix10;
286 begin
287 ---=---=---=---=---=---=---
288
289 Balance := Initial;
290
291 for I in Loop_Range loop
292 Radix_10.Multiply_And_Truncate (Balance, Factor);
293 end loop;
294
295 if Balance /= Trunc_Expected then
296 Report.Failed ("Wrong result: Radix 10 multiply and truncate");
297 end if;
298
299 ---=---=---=---=---=---=---
300
301 Balance := Initial;
302
303 for I in Loop_Range loop
304 Radix_10.Multiply_And_Round (Balance, Factor);
305 end loop;
306
307 if Balance /= Round_Expected then
308 Report.Failed ("Wrong result: Radix 10 multiply and round");
309 end if;
310
311 ---=---=---=---=---=---=---
312 end RADIX_10_MULTIPLICATION;
313
314
315 RADIX_10_DIVISION:
316 declare
317 Rate : CXF2003_1.Interest_Rate := 0.273;
318 Period : Integer := 365;
319 Factor : CXF2003_1.Interest_Rate := Rate / Period;
320 Divisor : CXF2003_1.Interest_Rate := 1.0 / Factor;
321
322 Initial : constant CXF2003_1.Money_Radix10 := 25.72;
323 Trunc_Expected : constant CXF2003_1.Money_Radix10 := 79.05;
324 Round_Expected : constant CXF2003_1.Money_Radix10 := 97.46;
325
326 Balance : CXF2003_1.Money_Radix10;
327 begin
328 ---=---=---=---=---=---=---
329
330 Balance := Initial;
331
332 for I in Loop_Range loop
333 Radix_10.Divide_And_Truncate (Balance, Divisor);
334 end loop;
335
336 if Balance /= Trunc_Expected then
337 Report.Failed ("Wrong result: Radix 10 divide and truncate");
338 end if;
339
340 ---=---=---=---=---=---=---
341
342 Balance := Initial;
343
344 for I in Loop_Range loop
345 Radix_10.Divide_And_Round (Balance, Divisor);
346 end loop;
347
348 if Balance /= Round_Expected then
349 Report.Failed ("Wrong result: Radix 10 divide and round");
350 end if;
351
352 ---=---=---=---=---=---=---
353 end RADIX_10_DIVISION;
354
355 end RADIX_10_SUBTESTS;
356
357
358 ---=---=---=---=---=---=---=---=---=---=---
359
360
361 Report.Result;
362
363 end CXF2003;